How to do an oil change :
Step 1: Make sure vehicle is turned off and gather all neccessary tools and fluids
Step2: Find the oil filter and engine oil pan.
Step 3: Drive vehicle up ramps , place drip pan underneath oil pan, unscrew the oil pan bolt to drain oil. When done draining place bolt back on and tighten it.
Step 4: Using the oil filter tool and a towel, remove the oil filter and let it drain into the oil pan. Note- some vehicles will have a skid plate that blocks the oil filter or engine oil pan so you may need additional tools to remove it.
Step 5: Place new oil filter and screw it on hand tight. Clean any oil spills that may remain on engine oil pan or oil filter.
Step 6:
Place new oil and check the dip stick. Remove all tools that are underneath the vhehicle.
Step 7: turn on Engine and take it off ramps.
Step 8: Check oil and fill again if necessary.
Step 9: Reset engine oil life on dashboard (refer back to owners manual or watch another youtube video). Check for any leaks and tighten them down if still loose.
Step 10: Test drive. You are done!
Engine Oil 0w20 castrol synthetic
amzn.to/3iAZRVV
Rhino ramps:
amzn.to/3Pfv7pL
creeper:
amzn.to/3UulKDy
oil filter tool:
amzn.to/3XQYOBn
Rachet and socket set:
amzn.to/3VynQn1
Funnel:
amzn.to/3FqrWrG
Shop towels
amzn.to/3UBcwFs
Негізгі бет How to do an oil change on a 2017 Honda Accord
Пікірлер: 37