Hello CFD Analysts. Thanks for all the response and support. However, 95% of viewers have not yet subscribed to this channel. Please consider subscribing for more such new CFD videos. Also, don't forget to comment on your favourite part of the video below and suggest topics on which you want videos in future.
@muhammadfirdaus2002
2 жыл бұрын
the best explained video so far, much appreciated brother
@cfdbabaopenfoamansyscfd2972
2 жыл бұрын
Glad it helped.
@abdullahalhasan4246
3 жыл бұрын
Owww...thank you so much. After seeing a lot of videos finally i have seen your video and done the simulation by myself for the 1st time and i am so excited. Thanks a lot and want to see a videos about drag reduction by using spoiler and shark fin... Thank you again
@cfdbabaopenfoamansyscfd2972
3 жыл бұрын
Glad to hear that the video was so helpful. I will definitely try to work on your suggestion videos in near future. Keep sharing and supporting.
@okxd8988
Жыл бұрын
BRO YOU ARE AMAZING, I used this video for the airflow around a human. This vid worked wonders. Thanks so much!!!
@cfdbabaopenfoamansyscfd2972
Жыл бұрын
Fantastic! That's really great. Keep sharing and supporting.
@arturo1737
2 жыл бұрын
Desde Arequipa-Perú : gracias no sabia como hacer este problema toma tu like y tu campana
@manojkumark4758
5 ай бұрын
Thank bro it helped me a lot for my project
@zooeyglass1780
2 жыл бұрын
Thank you! I've subscribed, so I'm definitely waiting for more content like this :D
@cfdbabaopenfoamansyscfd2972
2 жыл бұрын
Welcome aboard! More content is surely going to come up. Keep sharing and supporting.
@nurudin99
2 жыл бұрын
thanks! really comprehensive
@cfdbabaopenfoamansyscfd2972
2 жыл бұрын
Hello. I am glad you liked the video and found it helpful. Keep sharing and supporting.
@drvijaybhatkar938
11 ай бұрын
Thank You for nice CFD Video. Good for beginners
@a.w.5047
3 жыл бұрын
Thank you so much for this tutorial!!!
@cfdbabaopenfoamansyscfd2972
3 жыл бұрын
Most welcome. Glad you found it helpful. Keep sharing and supporting.
@muhammedkhan6238
4 ай бұрын
Thanks man so much helpful thank you so much for making this it help me a lot
@mayuriupasani1282
3 жыл бұрын
Very well explained. 😁
@cfdbabaopenfoamansyscfd2972
3 жыл бұрын
Glad it was helpful!
@berkayeryldz2059
2 жыл бұрын
you are the best
@cfdbabaopenfoamansyscfd2972
2 жыл бұрын
Thanks a lot. I am glad you like the videos. Keep sharing and supporting.
@1996akhileshvarma
3 жыл бұрын
very nicely explained
@cfdbabaopenfoamansyscfd2972
3 жыл бұрын
Thanks for liking. Keep supporting.
@atillaus9168
2 жыл бұрын
great tutorial
@cfdbabaopenfoamansyscfd2972
2 жыл бұрын
Thank you! Cheers! Keep sharing and supporting.
@himufloyd5024
2 жыл бұрын
Everything was smooth but there were no eddy current formation in my case .During visualization I could not spot one.Can you kindly tell what should I do ?
@hemantpandey9676
2 жыл бұрын
I have few doubts.. Please help me ! How can I determine the Characteristic Length of a car with its windows open for external CFD analysis in order to determine the drag force ? Also, what y+ value would you recommend in that case if k-w SST turbulent model is used ?
@cfdbabaopenfoamansyscfd2972
2 жыл бұрын
Hello. Sorry for the late reply. The characteristic length of the car will be same with the windows open. It will be the total length of the car. I am not sure about the y+ value for your case but you can keep it below or equal to 1 or keep it between 30 and 300. Hope that helps.
@mustafaegebozkurt3490
2 жыл бұрын
why didn't you use inflation ?
@valeriavolpe8800
10 ай бұрын
Many thanks to you!
@umairkhalid6300
2 жыл бұрын
Thnx a lot buddy ....
@cfdbabaopenfoamansyscfd2972
2 жыл бұрын
Happy to help :)
@muhammadfadly5659
2 жыл бұрын
hai i want to ask, i have done the geometry and when i want to generate mesh, it said that failed mesh, what should i do? thank u
@cfdbabaopenfoamansyscfd2972
2 жыл бұрын
Hello. Make sure that the boolean subtract operation has been performed correctly. Then you can reduce your element size slowly until the mesh gets successfully generated. Keep sharing and supporting.
@EngrOnCarHunt01
Жыл бұрын
make sure that the domain is far greater than the model or vehicle and don't forget to keep outlet side greater from others as explained in the video
@vidurapaathukkalam..8744
2 жыл бұрын
very helpful;; thanks a lot
@antonaveendp2896
3 жыл бұрын
do more videos sir
@cfdbabaopenfoamansyscfd2972
3 жыл бұрын
Thank you so much for appreciating my work. More videos are on the way. Feel free to drop your suggestions here.
@FunFactSchannel
2 жыл бұрын
Thanks , this video is very nice .
@cfdbabaopenfoamansyscfd2972
2 жыл бұрын
So nice of you.
@NguyenPhong-xf5xb
4 ай бұрын
Hey! Thank you for the detailed tutorial! May i ask which type of Honda is the one using in here?
@DivyamVermaBMA
2 жыл бұрын
Hey can you tell me why car is placed at the center of the enclosure
@cfdbabaopenfoamansyscfd2972
2 жыл бұрын
Hello. Ideally the wake region behind the car should be greater than the entry region so that we can accurately capture the flow behind the car. But in this tutorial for simplification purposes the car is placed at the center of the enclosure.
@hoankhacnguyen8964
2 жыл бұрын
hi bro! how to calculate the drag coefficient?
@cfdbabaopenfoamansyscfd2972
2 жыл бұрын
Hello. You can calculate drag coefficient in FLUENT by going in reports > forces > select the drag direction vectors and press compute. In the right side corner of console you will get value of drag coefficient.
@JITISH1
Жыл бұрын
Did you buy an ansys license for private use? I would like to give it a go, but not sure how to get Ansys. By the I follow your group on facebook as well, and will be purchaisng some of your courses soon. Good work.
@umairkhalid6300
2 жыл бұрын
Your new subscriber ❤
@cfdbabaopenfoamansyscfd2972
2 жыл бұрын
Thanks for subbing! Stay connected.
@vinayaknitnavare2000
2 жыл бұрын
by perform this simulation how can i calculate the drag and lift coefficient values. response quickly.
@cfdbabaopenfoamansyscfd2972
2 жыл бұрын
Hello. When you print the lift and drag forces you can get the total lift and drag coefficient values in the right side corner of the console window.
@suchithmengaram7220
2 жыл бұрын
Hello Brother did you get the values of those coefficients ? If yes share them ASAP
@suchithmengaram7220
2 жыл бұрын
@@cfdbabaopenfoamansyscfd2972 Please Share the values in a Hurry
@oguz.4225
2 жыл бұрын
Perfect 👍🏻👌🏻
@cfdbabaopenfoamansyscfd2972
2 жыл бұрын
Thanks 😊
@antoine1407
3 жыл бұрын
Thanks!
@cfdbabaopenfoamansyscfd2972
3 жыл бұрын
You are most welcome. Be sure to share my videos with your friends from CFD domain.
@anujpatil7785
2 жыл бұрын
Error showing while updating the mesh But iam. Doing analysis of Tesla model s and it has 3000 parts Pls give solution
@cfdbabaopenfoamansyscfd2972
2 жыл бұрын
Hello. You can send me your CAD model at cfdbaba@gmail.com and I can have a look at it.
@anujpatil7785
2 жыл бұрын
@@cfdbabaopenfoamansyscfd2972 ok
@tsegeyearegawi941
5 ай бұрын
how can i take the crosswind to study stability? where i write the crosswind value as an input
@megacup3977
5 ай бұрын
on the solution part it dont be going down the arrows and i dont know why i have preeated everything thrice
@smitabhamare6072
3 жыл бұрын
👍👍
@Alejandro-cl9ub
10 ай бұрын
My imported body won't line up in the middle of the coordinate system. Any help with that please? When I apply the symmetry it won't cut through the middle of the body. Please
@cfdbabaopenfoamansyscfd2972
10 ай бұрын
Hello. You may need to move your geometry with move option or assembly > align option in spaceclaim.
@eduardofinckgabler1474
Жыл бұрын
Eu te amo com todo o meu coração ❤️
@cfdbabaopenfoamansyscfd2972
Жыл бұрын
Eu também te amo❤
@brownnugget401
5 ай бұрын
trying to analyze f1 car but it is showing too many cells when it gets imported to fluent, i have student license so what can i do to reduce the cell count
@ramnaikbanothu8152
5 ай бұрын
Bro try to decrease the element size in the mesh. But you are saying that you are trying to analyse an F1 car. In that case the mesh should be fine so install a cracked version 😊
Пікірлер: 72