@@structuralengineeringtutor574 Luv Your WORK on REVIT DESIGN
@dancancrinskid2989
Жыл бұрын
Would you mind showing how you set the rebar type to H-type from the default ASTM rebars i.e 10m, 13M etc
@smishize
4 ай бұрын
Thank you bro.
@fokall1447
Жыл бұрын
Good afternoon, your video is enlightening, can you please make a video or explain it here how you made your custom call out tag to make it look like the one on cad-rc. Thanks..
@structuralengineeringtutor574
Жыл бұрын
Yes, with pleasure Sir
@LIONHEART66666
2 жыл бұрын
hello sir, thank you for sharing this tutorial. Can you also share the family that you are using ? thank you once more
@structuralengineeringtutor574
2 жыл бұрын
You are mostly welcome my friend. I am not using any family however. But i will be happy to share the revit file should you need it
@kanejaionmangoba5388
3 жыл бұрын
Thank God tutorials like this exist!🙌 Huge thanks to this Video.
@structuralengineeringtutor574
3 жыл бұрын
Thank God you appreciate the videos. Thank you very much. I will provide more tutorials
@zayaanhussaini6174
Жыл бұрын
Thanks for this video, it was very helpful to me as I was facing problem to segregate the Top & Bottom bars. 5 star from me
@structuralengineeringtutor574
Жыл бұрын
Thanks, i really appreciate you
@MJ-ru3dp
Жыл бұрын
Thank you so much for sharing your knowledge. I truely appreciate it. All the way from Jamaica. Blessings.
@structuralengineeringtutor574
Жыл бұрын
I appreciate you bro. Thanks
@fvzbilge
6 ай бұрын
You apply different methods for your slab reinforcement divisions.right?
@bkudzionera
3 жыл бұрын
You're the boss. Where have you been all along. You've gained a new subscriber!
@structuralengineeringtutor574
3 жыл бұрын
Thank you for your kind words. And thanks for subscribing
@darirusanferaa7647
5 ай бұрын
Thank you for sharing your knowledge and experience you have gained a new subscriber. Please continue to make a videos like this.
@md.habiburrahman-xg9sd
9 ай бұрын
Hello, you need to make some correction. long direction bar will be in bottom. Otherwise, your tutorial is very good.
@dancancrinskid2989
Жыл бұрын
Would you mind showing how you set the rebar type to H-type from the default ASTM rebars i.e 10m, 13M etc to H12 etc etc?
@kamranrehman4658
Жыл бұрын
❤❤❤❤very good information i boost my exp see this very good lacture ❤❤❤thank u sir
@logoravaezekia1713
2 жыл бұрын
I've been using autocad for long time now. This software is wonderful. Thanks for sharing.
@structuralengineeringtutor574
2 жыл бұрын
Thank you for watching. 🙏🙏🙏
@srdjansimanic2404
2 жыл бұрын
comment for the algo, great stuff, keep going!
@structuralengineeringtutor574
Жыл бұрын
Thanks brother
@jackson77ish
2 ай бұрын
Thank you, you helped me alot! Cheers!
@ribelashx9640
3 жыл бұрын
CAN YOU MAKE ONE FOR STAIRS
@structuralengineeringtutor574
3 жыл бұрын
Yes , will surely do. Stand by for that
@justscribeyourthought9855
2 жыл бұрын
hey you didn't show the crank and lap length i think thats important
@structuralengineeringtutor574
2 жыл бұрын
You are right, its important and i didn't show it because in my country, its not necessary to show. They say it's a site Engineers job to determine that in regards to the length of the bars he is receiving from the suppliers. But all in all, i agree its important.
@justscribeyourthought9855
2 жыл бұрын
@@structuralengineeringtutor574 well its alright!! do you have any video for rbar quantity schedules?
@mojahedsabbah26
Жыл бұрын
Thanks for the great work!! Is there any way to demonstrate the hooks of bars in the top view? That is, to show the end bars as - L- bars looking in the plan of the slab??
@structuralengineeringtutor574
Жыл бұрын
Yes you can. But i don't like that. Because it sometimes cause confusion especially when there are alot of things in the drawing
@zolgerelt
2 жыл бұрын
how did u make ur section cut to look like that? is there a tutorial for that? response would be highly appreciated
@structuralengineeringtutor574
2 жыл бұрын
Hello Zolo, there is nothing special about that section cut. Just select a section and cut it where you want. I might be wrong but i believe i didn't skip any step to get exactly what i did. Thank you for watching my video.
@niinuetey9878
2 жыл бұрын
GUYS, USE PROTA STRUCTURE. YOU COULD DO THIS IN UNDER 30 SECONDS
@structuralengineeringtutor574
2 жыл бұрын
I believe you can. But will then require alot of corrections
@tagaparalaya
2 жыл бұрын
what if the lap is cranked? how do you show a bar on the plan that it is a cranked bar?
@structuralengineeringtutor574
2 жыл бұрын
If the lap is cranked, then you might have to show the horizontal section of the slab. However, in BS 8110, there is no need for cranked bars. I believe this concept is mainly in Indian Code
@prabhatsingh1509
Жыл бұрын
brilliant
@structuralengineeringtutor574
Жыл бұрын
Thanks
@megadesignarch4023
2 жыл бұрын
Wonderful inspiring
@structuralengineeringtutor574
2 жыл бұрын
Thank you. You inspire more
@sureshcivil8627
2 жыл бұрын
Nice video can u make a video on Drop panel of Flat slab & raft with opening - It helps us Lot
@structuralengineeringtutor574
2 жыл бұрын
Thank you my friend. Will do that Inshallah
@sureshcivil8627
2 жыл бұрын
Please I have also raft.. Can u please do.. It saves me.. Respect from dubai
@justscribeyourthought9855
2 жыл бұрын
thanks
@structuralengineeringtutor574
2 жыл бұрын
Mostly welcome my friend.
@rodneymoyo13
2 жыл бұрын
Where have you been sir, this is very great
@structuralengineeringtutor574
2 жыл бұрын
I have been around my friend. Thank you for your kind words.
@rocky8004
Жыл бұрын
Awesome teaching Sir Ji
@structuralengineeringtutor574
Жыл бұрын
Thank you. I appreciate it
@danieldonkoh1337
2 жыл бұрын
Please ... .how can I contact you?
@structuralengineeringtutor574
2 жыл бұрын
My email: omi_kaka@hotmail.com
@ceepatekconsult
2 жыл бұрын
How do I install BIM software
@structuralengineeringtutor574
2 жыл бұрын
Which BIM software?
@ceepatekconsult
2 жыл бұрын
@@structuralengineeringtutor574 I thought what you used was BIM
Пікірлер: 63