I like the welcome to Hell. Dry appropriate. Another hellish job is reinstalling the rear wheel and tire. Very nice how too.
@jamesmcguire9155
Ай бұрын
Thanks XSRDT- Overflow bottle is tricky - a small dab of grease helps hold those spacers. Safe riding amigos.
@XSRDetroit
Ай бұрын
Solid tip dude!
@Zsoooooti
8 ай бұрын
collected, no frills. Thanks!
@chris-vecchio
3 жыл бұрын
Great video! Made changing mine super easy!
@XSRDetroit
3 жыл бұрын
I'm glad to help! Thanks for checking out the video
@bensutherland6871
2 жыл бұрын
Thanks very helpful I like watching a how to video before I touch anything even if I believe u know how to do it because you never know if there's a trick to it
@XSRDetroit
2 жыл бұрын
Glad to help, thanks for checking out the channel
@leomarq
Жыл бұрын
WELL DONE! I had been meaning to due my coolant on my 2019 mt09 but couldn’t find many videos on the procedure. You’re was very well done and explained it all very throughly as I was following along for each step of the way. I appreciate you man! Thank you!!
@XSRDetroit
Жыл бұрын
No problem! Glad to help
@Xzami09
5 ай бұрын
I use pentosin pentofrost A3 for my 2019 mt09. I change the coolant every 2 years. Good tip to check back the coolant after a 30 mins ride. Let bike cool down for several hours😊
@kendtchileninjah5905
5 ай бұрын
Thanks from Va🤙🏾
@stigweird3155
8 ай бұрын
Cheers mate....very useful vid 👍🏻
@niklasolsson7036
2 жыл бұрын
Excellent video, made the job look easy! Especially grateful for the trick to check the coolant level with the LED flashlight. I gotta ask though, what front paddock stand are you using and how did you get it in that hole in the headstand? Last headstand I got was a bit short, and where the horn is located made it impossible. Did you relocate it?
@XSRDetroit
2 жыл бұрын
Thanks man. I didn't have to move anything to get the front wheel stand in. The front stand is a woodcraft with a 20mm pin. Had to to make some adjustments to it but it works no problem for me.
@sherifhamdy9229
7 ай бұрын
Very useful 👏👌🏻, any other coolant option from motul ?
@DerAusreiter
2 жыл бұрын
I will try it! Soon 1K subscribers! Nice
@XSRDetroit
2 жыл бұрын
Thank you!
@Geo_Okami
Жыл бұрын
That white spacer, I've lost my mind put it in back😅
@XSRDetroit
Жыл бұрын
Worst part of doing this job lol
@krooked89
Жыл бұрын
Great video man
@XSRDetroit
Жыл бұрын
Thanks dude!
@billhamilton7524
Жыл бұрын
do you have a video of new exhaust by chance ,,The sound
@XSRDetroit
Жыл бұрын
If you check the riding clips playlist look for raw audio in the title
@supamotodragunova3674
2 жыл бұрын
If you're filling the reservoir before filling the radiator do you need more than 2 quarts total of coolant? I'm doing a '17 fz09 and I just bought 2 yamacools.
@XSRDetroit
2 жыл бұрын
Two yamacools should be enough
@supamotodragunova3674
2 жыл бұрын
@@XSRDetroit I was just overthinking it. Very helpful video. Thank you.
@gosoku2771
3 жыл бұрын
What kind of oil are you running? Thanks
@XSRDetroit
3 жыл бұрын
Mobil 1 full synthetic
@elisico7335
2 жыл бұрын
How do you open the radiator cap?
@XSRDetroit
2 жыл бұрын
0:28 there you go
@andreamellon7505
10 ай бұрын
👍🇮🇹
@febrisetiawan6935
2 жыл бұрын
how much coolant do we need to fill it dude?
@XSRDetroit
2 жыл бұрын
Just under 2 quarts
@vascogalvao2987
Жыл бұрын
Just use a syringe…that coolant reservoir is a pain in the ass.
@yourwifesboyfriend6081
Жыл бұрын
Came here to say the same.
@adamh603
3 жыл бұрын
Thanks for this! Very well explained and no unnecessary fluff. :)
@reedchaber8239
Ай бұрын
Thanks for showing that top collar goes in back. Another video shows it incorrectly going in front and I couldn't get it. Wasted an hr. before doing more research.
@eastbaymauiboy
3 жыл бұрын
My 16 XSR hasn't been done yet, and neither has my 13 Speedie for that matter. 😬 Guess I'd better get on it!. Thanks man!, good stuff!. Gotta love KZitem!.
@XSRDetroit
3 жыл бұрын
Thanks for checking out the video!
@FinnyG47
2 жыл бұрын
2018 MT-09 2 32 fl oz bottles of Yamacool is enough if you don't bother with that pain is the A** overflow bottle. Gets you 95-90% flushed. Drain. Heat to 150. Top off. Let if fully cool 4 hours or overnight. Top off radiator one last time.
@rrdenver3898
9 ай бұрын
I learned DONT take that Coolant assembly off That you fight with forever
@somchaichaiwongsa4692
3 жыл бұрын
How much liquid coolant be prepared?
@XSRDetroit
3 жыл бұрын
Should use under three quarts
@tomjendra9733
4 ай бұрын
took me a good 10 minutes to get the radiator cap back on 😭
@arthercasillas2755
2 жыл бұрын
Does anyone run one gallon of distilled water when draining coolant as the bike is running?
@andrestarazona4151
Жыл бұрын
Tengo fuga por la tapa del radiador, que debo de hacer?
@billhamilton7524
Жыл бұрын
helpful video thanks ,,that spacer was annoying ,I wrapped some teflon tape around it and it snugged in enough to hold in place ,after I got fastener started I put the lower spacer in ,,that seemed like an after thought from Yamaha Its weird how your camera made it look like it was the left side thanks again
@XSRDetroit
Жыл бұрын
I had to film portions of this video with the camera upside down and fix it in post, which makes it look flipped. Thanks for checking it out!
@antonsumenkov6627
2 жыл бұрын
how much coolant does it need to replace? are two bottles of yamalube yamacool enough?
@XSRDetroit
2 жыл бұрын
That will be enough. I bought a third bottle and didn't use it.
@VoyagingVoyager
2 жыл бұрын
Where did you get the engine cages from?
@XSRDetroit
2 жыл бұрын
They're Givi engine cages powder coated gold
@tyson-mt0985
3 жыл бұрын
awesome video mate, looking forward to changing my coolant!
@XSRDetroit
3 жыл бұрын
Glad to help! Thanks for checking the video out!
@csiautodetail
2 жыл бұрын
Did you pour any coolant in the reservoir before you did in the radiator?
Пікірлер: 58