Great tutorial. I've used this method a few times and found it efficient. My only note is that a 1px feather might not be enough. I've gone in with a brush to feather the layer mask to ease the transition between the edges and shadows created by the new chin line.
@ramadisakusbandrianto9007
Жыл бұрын
my cmd+j not working to make duplicate is there’s any other way
@balkan.daytrade5403
5 ай бұрын
Greetings, this video is very helpful and easy to understand but for some reason im struggling with invert part, when i click on command and ctr on new layer pen, curves doesen't show up so i can't invert
@84Saralouise
Ай бұрын
I am having the same issue, did you ever figure it out?
@ahoyleisure
Жыл бұрын
Brillint this!!! love the warp tip rather than a lot of cloning
@robsonfotofilme
6 ай бұрын
Works for me. Thanks for the tutorial.
@IamVel
3 ай бұрын
it worked, thank you! The only thing why it was tricky for me was that I had a lot of straight lines right next to my chin area on the background. So that needed a bit extra care.
@peterbech6841
4 ай бұрын
The part where you click SHIFT + CRTL + I just doesnt work for me... it does not select the opposite
@brandyschultz5022
3 ай бұрын
Same
@JBanksPhotography
Жыл бұрын
DUDE!!!!!!! You are a lifesaver man!!! Thank you soooo much!
@wingingtundra
11 ай бұрын
Worked like a charm
@emiliedeslauriers
Жыл бұрын
This worked very well for the photo I’m working on! Thank you!
@ayeshach4549
6 ай бұрын
Kon sy app sy kia qp NY ?
@AstrologyGuy
Жыл бұрын
Excellent Video! Thanks so much
@kevinballou7822
2 ай бұрын
I see the process but whether it's due to the speed of the video or version of photoshop I have, I'm having trouble figuring this out. The layer process after pen tool selection is my main concern as the layers popping up after your instructions appear different than what you have.
@LaunaWilson
Жыл бұрын
What photoshop software are you using?
@daniellet9138
11 ай бұрын
wonderful, thank you. I've been using clone tool and it's a difficult mess.
@claudeIsbell
2 ай бұрын
Works great except that pulling chin up makes the shoulders, etc., comes up as well. I have seen another tutorial that shows a much smaller warp window. It is just situated over/around the neck. Nothing else is pulled. I left a couple of messages, but they have not been returned. any help is appreciated.
@ellemarie6731
7 ай бұрын
You've change my life in under 4 minutes. This used to take me so long
@Jackieemora_photos
Жыл бұрын
I'm trying to do this tutorial but im so confused what i"m not doing right. I tried the "shift+command+i " button on my MAC but its not copying it :(((
@chokhui4664
5 ай бұрын
Hi, I found that actually there is some missing part in this video. After u done the step at 1:24, click the "Paths" tab at right side of ur PS (if you dont hv "Paths" tab, u can go "Window" at ur PS and check the "Paths") click the "Work Path" now there is a blue line in ur image, then right click and select "Make Selection" " after that click "OK" and now u can continue the step the video teach.
@leniehulse1621
2 жыл бұрын
Great tut as usual! Thank you! Why is it that when I right click I don’t see “make selection”?
@BrendanWilliamsTutorials
2 жыл бұрын
You either need to complete the path, or make sure the layer you want to select if highlighted in the layers panel, or perhaps your image layer is locked. Usually one of those things is the culprit.
@pai2695
2 ай бұрын
thank you for you imformation finally I can get home!!!!
@CHGO123
Жыл бұрын
Thank you this was very helpful. I had a client that I had to do something very quickly. Now I look like I know magic. Lol.
@AshleySarros
2 ай бұрын
This was great - thanks for sharing
@missmadkat4632
10 ай бұрын
THANK YOU! So easy and to the point, i loved it.
@QispiJota
8 ай бұрын
thank friend!!!greeting from Lima Perú.
@peterlyonshall
9 ай бұрын
thanks, Brendan. nice work!
@dredanoxrealm
3 ай бұрын
Hi, when I clicked warp, the grid moves but it doesn't move the picture. What did I do wrong?
@o.mogrovejo3669
Жыл бұрын
Thanks a lot. This video saved me on some headshots I just created
@daliakae
Жыл бұрын
Is there a reason why I cannot invert the way you're showing me? I've tried 6x and the inversion layer does not populate :(
@rurupyon5686
Жыл бұрын
You have to press control while selecting the new image =)
@kymdarling4080
Жыл бұрын
doesn't work for me either, I followed him exactly, tried like 50 times :(
@rhondabest8554
Жыл бұрын
@@kymdarling4080 I tried it over and over and it would not do it for me either!
@taimakw
Жыл бұрын
@@rurupyon5686 me too
@rurupyon5686
Жыл бұрын
@@taimakw You Have to Press and hold the control key. then clock the new Image!
@eduardov.i7962
2 жыл бұрын
Thanks so much for the video. Have a great week!
@BrendanWilliamsTutorials
2 жыл бұрын
Thank you, you too!
@brookeeverett4166
Жыл бұрын
how do i get this program?
@jjjnr
Жыл бұрын
You are brilliant!
@Zennubehanimcim
4 ай бұрын
THANK YOU
@DeepHealingFrequencies
Жыл бұрын
the invert command doesn’t work for me (=
@Ereliorell
5 ай бұрын
Amazing! Thank you! ❤
@jtruitt642
Жыл бұрын
Thank you! That was helpful!
@thxphotog
Жыл бұрын
This is really great!
@MagdalenaFornalik
Жыл бұрын
Easy and great! Thank you!
@shrutithaker720
Жыл бұрын
love this tutorial, easy, well paced and detailed.
@SarahJane-ts8bi
Жыл бұрын
Can someone please help me. I get to the end. I get to free transform, warp, and grid, but it is at this point that the "bottom layer", that is suppose to nicely move up behind the "top layer", flips underside. So the top layer is the right away up, and bottom layer is underside down. What is happening?
@photoshopmagic9229
2 жыл бұрын
Nice tips man, thanks!
@BrendanWilliamsTutorials
2 жыл бұрын
No problem!
@luisdanieldiazreyes
Жыл бұрын
thank you so much!
@YehoashDream
2 жыл бұрын
Why not use the lequify?...
@BrendanWilliamsTutorials
2 жыл бұрын
You 100% can use liquify! And if that works for you best, you should do it. This is just another option that I think is generally easier for all levels of PS users since there are less settings and tools involved.
@mysteriousmemt
Жыл бұрын
Do you do this professionally? I have a really important picture of like this done on
@BrendanWilliamsTutorials
Жыл бұрын
Not anymore unfortunately, just teach full time. Sorry!
@thegodofwar94
11 ай бұрын
My pen does not work like that, the curves. It makes like S lines? :( what am I doing wrong
@davidnewkirk2438
Жыл бұрын
🙏🙏 Thank you so much! Great, quick tutorial
@GiorgioLeone-t2h
Жыл бұрын
Big !!! THANKS a lot!!!
@jondoough
Жыл бұрын
Doesn't work ctrl shift i in latest version
@annasperduto1766
Жыл бұрын
Ciao questo video è molto interessante...so poco di photoshop ,mi è difficile seguire tutto..chiedo troppo se puoi scrivere passo passo questo tutorial. Sono Italiana.Ti ringrazio se puoi rispondermi. Ciao
@SaminSikong
2 жыл бұрын
Thank you.
@PM-ue6qx
10 ай бұрын
This did not work for me. I dont know why but my cntl shift I didnt invert.
@RaquelRuehl
Жыл бұрын
Whoa!!! Perfection! Thank you for this ❤
@CreativeJeannieus
Жыл бұрын
THANKKKKKKKKKKKK YOOUUUUUUUUUUUUUUUUUUUU
@aaliyah-hi6ed
Жыл бұрын
what did you use for app
@mOdatVideo
Жыл бұрын
Inversion: command shift i doesn't work as a direction.
@troywalt4834
Жыл бұрын
Liquify doesn't work for this? cause it's 10 times easier
@ayeshach4549
6 ай бұрын
Kee app sy kia h ya
@AnnSloan15
Жыл бұрын
Hello can u help me edit my only 1 wedding photo😭😭 we have double chin and i couldn’t print it because we look so fat.. i want to give it to my husband as our 15th yr wedding anniv.. thank u..
@kurtiz0305
Жыл бұрын
everyone saying thank you and great tutorial. I tried everything you did for hours and it didn't work for me.
@debraanderson8359
2 жыл бұрын
Super nice new technique! Warp…This is genius!
@dredanoxrealm
3 ай бұрын
It's hard to follow this part: 1:21
@beccymiddleton1458
8 ай бұрын
I can’t even get my pen to do what I want it to! 😂
@moonzestate
8 ай бұрын
The problem with this method is that it bulk up the subject's traps. 😂
@pitapocket9698
Жыл бұрын
this is way to fast, i have to pause it every 5 seconds
@hexotica
27 күн бұрын
WAY to fast and control+SHift+I did not work.
@pugsee972
5 ай бұрын
ridiculously too fast mate
@7894mike
Жыл бұрын
love this tutorial without blablablabla bullshit make video longer but boring.
Пікірлер: 90