Main items you will need to do this installation yourself are:
Pneumatic or electric stapler (a hand stapler will not have enough force to drive the staples into the seat plastic)
3/8” staples (you can go shorter or longer, just don’t go too long where it pokes through into the seat surface)
Needle nose pliers
Small flat head screwdriver (I used 1/8” size)
I would highly recommend setting the fabric in the sun prior to installation, as that will give you a lot of flexibility in the material. You could probably also use a hair dryer very carefully, but I would not recommend a heat gun as that could damage or discolor the material.
Link to the cover that I purchased is right here
www.ebay.com/itm/222599783520...
Негізгі бет Автокөліктер мен көлік құралдары How To Easily Replace And Install A New Jetski Seat Cover
Пікірлер: 19