can you please post a link with complete vag commander? that one which you posted have no .exe file
@justme8956
5 ай бұрын
Vag commander has his own immo off Button, working like a charm , no need fo immo tool
@matyashorvath4295
Жыл бұрын
Any idea why I keep getting ,,Cannot reach device" whenever I try to read ECU eeprom? I tried blue KKL and K+CAN cable too. Seat Toledo mk2 2001
@theBdunklee
Жыл бұрын
Do you have link for all the tools used?
@hamzehabsh
4 ай бұрын
Does it have to be a blue VAG KKL cable, or can i use any OBD to USB cable (for example Ross-Tech HEX-V2)
@caryfuk8
3 жыл бұрын
Vag comander have buttons for immo too, working ofcourse :D
@mrbowtieguy
3 жыл бұрын
I cannot find the links in the comments?
@mkfourgli1
Жыл бұрын
Hey great video. Does this work on mk5 gti?
@valentinowerner5193
Ай бұрын
where i get the programm?
@Morteexx
2 жыл бұрын
I like how you trust your battery xD , I have bricked a ECU with pc turning off xD, I got lucky and got it recovery right after tho xD
@hamzehabsh
4 ай бұрын
Does this remove the "Immobilizer active" from the dashboard also? Car runs but the immobilizer active is still on the dashboard
@ERAutomotive
4 ай бұрын
If it’s the original cluster you won’t have that message If not original cluster Use dash dump edit to remove that message
@hamzehabsh
4 ай бұрын
@@ERAutomotive is that a program? Do u have a link to it
@andreamonastra6622
3 жыл бұрын
Great video! This software work with hex-v2 cable? I have also kess v2 and MPPS V16 can I read TDI ALH's eeprom with this tools? Thanks very much!
@ERAutomotive
3 жыл бұрын
I use blue kkl cable for this
@DominikWr
Жыл бұрын
hex-v2 not work it is on usb not com port. mpps v16 not work. i try on audi a3 8L.
@davispaul82
3 жыл бұрын
Does this only work with diesels cars or petrol cars also? Also were you able to compare to original file with immo on to the one with immo off to see where the immo off was written?
@ERAutomotive
3 жыл бұрын
Hey Yes you can immo off gas ecus as well procedure depends on which ecu And yea u can definitely look at the file with a hex editor and see where the changes were made
@davispaul82
3 жыл бұрын
@@ERAutomotive I really appreciate it and you video was very informative. keep up the good work and hope to see more videos from you
@elmacgyver968
2 жыл бұрын
I turned immo off on my 2002 golf tdi, with this process. Engine starts and runs fine, but I now get a check engine light for engine block by immobilizer. Does anyone know what i have to do to fix my new problem? Has anyone experienced a check engine light for immo after immo off programming? Or do i just have to deal with the check engine light on all the time. If i erase the code it sets right back on the next start.
@ERAutomotive
2 жыл бұрын
Did U checksum ? Before writing
@elmacgyver968
2 жыл бұрын
@@ERAutomotive , I did. But i will try loading ariginal file again and retry process.
@elmacgyver968
2 жыл бұрын
I think my problem was the TCM loosing signal from the ECU when programming and the TCM was setting DTC's. Cleared all DTC's and test drove. So far so good. Thanks for the info.
@ERAutomotive
2 жыл бұрын
Yeah that makes sense Always clear codes after flashing
@johnharding5251
2 жыл бұрын
Will this work with a B5 RS4? Have to remove cluster with KM for one with MPH but the new cluster doesn’t have immobilizer.
@ERAutomotive
2 жыл бұрын
Check this I believe your ecu is me 7 kzitem.info/news/bejne/y2Zvn4Zjb6abZZg
@johnharding5251
2 жыл бұрын
@@ERAutomotive thanks. I don’t have that bench equipment. Wouldn’t get it in time if I ordered it. What if I found another cluster with immo and cloned the old one would that work
@ERAutomotive
2 жыл бұрын
Check out nefmoto They have a different method that uses the blue kkl cable
@mahirc4091
3 жыл бұрын
My car audi a3 2002. year was stolen. I found and returned the car, but now the immobilizer light flashes constantly. The car can start with any key. The immo light flashes all the time while the engine is running. How do I fix this?
@lennyhenriquez2811
3 жыл бұрын
I had that yesterday, but I tried programming 2 keys and only had one on hand. Once I tried again with 1 Key it went away. Try reprogramming the key.
@robrobi7841
Жыл бұрын
Hi! Will this work on my audi tt 2001? I want to replace ecu and take off immo. Thanks
@ERAutomotive
Жыл бұрын
The gas engine ecu are different Check video on me7
@robrobi7841
Жыл бұрын
@@ERAutomotive i do have ktag but i dont have a eprom tool! What eprom tool u use? Where to find one? Thanks for help!
Can this be done with the ECU still in the vehicle (via the OBDII port), or does the ECU have to be removed? Thanks.
@ERAutomotive
3 жыл бұрын
Can be done with ecu in the car
@danohara3032
2 жыл бұрын
@@ERAutomotive can you do this with VW Audi with vag commander on edc16 ?
@ERAutomotive
2 жыл бұрын
No
@camouflagerecords1940
3 жыл бұрын
Hello how is the name from the obd2 tool? Do you have a link please to buy them? and the other question , how can i get this siftware to read the eeprom
@ERAutomotive
3 жыл бұрын
The cable is a blue kkl from eBay or Amazon Cheap cable less then 10$ And there’s a link in another comment for the software
@camouflagerecords1940
3 жыл бұрын
Thank you do you have a link for the cable please amazon or ebay and the edc15 edc16 cal i have but i need this software to read the eeprom i have a original ross tech vcds can i read with them and this Software
@ERAutomotive
3 жыл бұрын
Just a quick eBay search www.ebay.ca/itm/402812947205
@camouflagerecords1940
3 жыл бұрын
Thank you my friend very much but can i read the eeprom and write with the original ross tech vcds and this software?
@ERAutomotive
3 жыл бұрын
No
@dashtyATG
3 жыл бұрын
Hy thanks for your time. Is it ok to ask why they want you to do the immo of i understood immo stands for immobilizer but i don't fully understand what do you mean by immo of if you don't mind plz.
@ERAutomotive
3 жыл бұрын
Makes it easier to swap in a different ecu into the car Or for swaps since typically the swap car wouldn’t have the rest of the parts required for fully functioning immobilizer
@dashtyATG
3 жыл бұрын
@@ERAutomotive oh i see it now thank you How about the data on the old ECU? And I guess the car would start with out the transponder on the fob afterward right?
@ERAutomotive
3 жыл бұрын
Yes that’s right
@mikajones3018
3 жыл бұрын
Bosch EDC15C4 on freelander td4 can it work on this ecu?
@ERAutomotive
3 жыл бұрын
Not sure I’ve only done on vag cars
@beardymcturbanhead4193
3 жыл бұрын
@ER Automotive Which driver did you use with the "Dumb" vag-com dongle ?
@ERAutomotive
3 жыл бұрын
I believe the one that installed with vcds lite Also the immo off button in vagtester works
@beardymcturbanhead4193
3 жыл бұрын
@@ERAutomotive Thanx, I couldn't get any version of VagTester to communicate with the ecu using both drivers (believe it doesn't open the port for some reason) ... I'll try using the Hex interface to see if it corrects the problem, tho the blue one does work with vag-com lite which technically should work with VagTester
@beardymcturbanhead4193
3 жыл бұрын
... and i did set up the port in the tester file
@ERAutomotive
3 жыл бұрын
That’s very strange
@beardymcturbanhead4193
3 жыл бұрын
@@ERAutomotive Thanks for reply and good tutorial btw... And yes, tried different versions I think v3.5 was coming up with port error (which i set to 4 where my com-port is set to) and the v2.5 said no response from ecu... Used K-Line as the protocol... I made a dual boot setup on the laptop so ill try first on Win XP instead of win7 maybe its something in the windows
@charlychlonson8381
Жыл бұрын
Does this also work with EDC15VM+?
@ERAutomotive
Жыл бұрын
Yes And just use the immo button in vag commander
@kimokimo5618
2 жыл бұрын
compatible with golf 5 year 2006 please?
@ERAutomotive
2 жыл бұрын
No Follow video for edc16
@ColonCrusher
Жыл бұрын
This work with a 2003 jetta tdi?
@ERAutomotive
Жыл бұрын
Yes
@jacobstan3235
Жыл бұрын
Greetings… will this work with a Ross tech cable ? Also, will this program work on windows 10/11 ?
@ERAutomotive
Жыл бұрын
No won’t work with rosstech cable And yes to win11/10 whatever
@jacobstan3235
Жыл бұрын
@@ERAutomotive thanks. Got a blue one on the way.
@joonasmuhli9918
3 жыл бұрын
what is the name of this software? can i get a link?
@ERAutomotive
3 жыл бұрын
Here’s a link drive.google.com/drive/folders/1XnmDSRGElb3rmOZna-2Nu0BbHpAaIn2Y
I allready have bin file. I try to do immo off with edc 15. when I open the bin file with ec15 FIN and Immo parts emty, KM and Login 0(zero), Immo status ON. than I push Off and calccheck and save . The saved file is 0KB. What is the problem?
@ERAutomotive
3 жыл бұрын
Sounds like a bad read
@yigitaltug3271
3 жыл бұрын
@@ERAutomotive ı have 2 bin files. One is original , other is tuned stage 1 file. Both files read by tuning company. I tryed both files but result are same. 0KB
@ERAutomotive
3 жыл бұрын
That’s not the immobilizer file
@yigitaltug3271
3 жыл бұрын
@@ERAutomotive I didn't know they were two separate files. sorry. When I saw the bin extension, I thought it was a single file. I will try to read the immo file myself. thank you
@christianbro2
3 жыл бұрын
Will this flash a light in the dashboard? And if it does, how do I remove it?
@ERAutomotive
3 жыл бұрын
No it doesn’t flash light on dash In my experience
@elmacgyver968
2 жыл бұрын
The immo will still be active in the instrument cluster and when it dosen't detect the right signal from the key the immo light will flash, but the ECU ignores the signal from the cluster and the engine stays running. Sorry no fix for the light. Other than covering it or removing the bulb.
@mikoajprusak4955
Жыл бұрын
Hi, can you tell me why cant you use the "Immo off" button instead? Thanks in advance for the answer
@ERAutomotive
Жыл бұрын
You certainly can and that’s now I do it now actually
@mikoajprusak4955
Жыл бұрын
Thanks man
@alhalex8501
10 ай бұрын
What do you mean? Just click immo off and it does it for you ?
@ERAutomotive
10 ай бұрын
@alhalex8501 when u open the program you will see
@alhalex8501
10 ай бұрын
@@ERAutomotive okay but not vcds with a hex v2 cable right ? That won’t work correct ?
@kore6410
6 ай бұрын
Could i please get a download for the software? Everything im finding is fake and a virus.
@kaarong
Жыл бұрын
hi can you provide the link of the programs i dont see them i will appreciate
@ERAutomotive
Жыл бұрын
Can all be done in this software Just read And click immo off Then write mhhauto.com/Thread-Vag-commander-1-4-software-please
@kaarong
Жыл бұрын
@@ERAutomotive oh yes I have the vag commander I just need the other one edc15 I have one version but I been looking that one that you have
@ERAutomotive
Жыл бұрын
You don’t need edc15 calc Just use vag commander to turn off immo
@rubenmartin6234
Жыл бұрын
Top. It works perfect
@mahdiasle1792
2 жыл бұрын
i need to downlad this can you send the link in descreption
@ERAutomotive
2 жыл бұрын
mhhauto.com/Thread-vag-commander-for-kkl-cable
@ethanmccrory1727
3 жыл бұрын
Where do I get the software? Thanks
@ERAutomotive
3 жыл бұрын
There is links in the comments One link is no good others work
@markshone4606
3 жыл бұрын
Is there any chance you can send me the software i have the cable
@ERAutomotive
3 жыл бұрын
mhhauto.com/Thread-vag-commander-for-kkl-cable
@markshone4606
3 жыл бұрын
@@ERAutomotive thankyou your a star
@markshone4606
3 жыл бұрын
Cant get the kkl cable work with it unfortunately as im on windows 10 ive lituraly bought mpps to read ecu and still cant unlock it lol pain in the ass
@ERAutomotive
3 жыл бұрын
Virtual machine or dual boot with windows 7
@markshone4606
3 жыл бұрын
@@ERAutomotive i tried dual booting with windows 7 it wnt install its being a pain any chance i can send u my ecu file and you unlock it for me im getting desperate
@therose2444
3 жыл бұрын
So I can use this on a vw jetta gls 2.0l 2000
@ERAutomotive
3 жыл бұрын
No that’s not an edc15 in the 2.slow
@therose2444
3 жыл бұрын
So wat can I use
@ERAutomotive
3 жыл бұрын
kzitem.info/news/bejne/y2Zvn4Zjb6abZZg This is one method There’s are others that can be found on nefmoto forum that use the cheap blue kkl cable
@gregyfeliciano9397
3 жыл бұрын
Will it work with VW caddy 2011?
@ERAutomotive
3 жыл бұрын
That has a different ecu And is a different procedure I haven’t personally done one
@Artegonit
2 жыл бұрын
@@ERAutomotive is this tutorial compatible with VW caddy 2006? It has immo 3. How to know if its EDC15 or EDC16?
@ERAutomotive
2 жыл бұрын
Depends on the ecu 2006 prob has ecu 16 So verify and follow the correct tutorial
@Artegonit
2 жыл бұрын
@@ERAutomotive how can i werify it?
@ERAutomotive
2 жыл бұрын
Easiest way is to look at ecu
@adamsorell4851
3 жыл бұрын
Software is for windows 10?
@ERAutomotive
3 жыл бұрын
I believe it’ll work yes
@eivindholthe530
3 жыл бұрын
Thanks! :)
@sara78130
2 жыл бұрын
Thanks
@moustaphacheva3757
9 ай бұрын
Cood 😊
@Vitassrussu
3 жыл бұрын
In Audi A4 B6 crypto not work
@ERAutomotive
3 жыл бұрын
What ecu?
@mikej2264
2 жыл бұрын
My B6 A4 1.8T is 8E0909518AF. Im told that it cant be done.
@ERAutomotive
2 жыл бұрын
It’s done differently then this video Follow me7 immo video It’s not as straightforward as edc15
@alexandreliseev1665
8 ай бұрын
Я все сделал как у ты но посе этого блок перестал выходить на связь.... Теперь ты болжен новый блок.....
@simonmolina3725
2 жыл бұрын
Thank you so much, can you provide links for the software
Пікірлер: 153