Awesome video… Thank you… It was my first time using it and with your explanation came out perfect
@KarleyHall
Жыл бұрын
Yay!! That is awesome! Thanks for taking the time to comment- I’m so excited for you! Engraving with the RA2 Pro is so much fun!
@b2coolus1
11 ай бұрын
Thank you very much. I now understand why I was getting the error message.
@hsepulveda1
Жыл бұрын
This turned out amazingly!!!
@janesfavsvideos
Жыл бұрын
Great video would love to see more with this tool
@gizmojeff
9 ай бұрын
Goof-Off and blue paper towels work best for me for cleaning up the design. A magic eraser is just low grade sand paper and scratches things.
@zacwarn917
Жыл бұрын
For my 10W xtool, I use 49% power and 45mm/sec. After wiping it down with LA Totally Awesome, my results come out shiny
@kristinr4384
11 ай бұрын
Thank you, very helpful
@flagmanproducts1743
Жыл бұрын
Explained a lot thank you. is it possible to do a full 360 engrave on tumblers or just one side at a time
@KarleyHall
Жыл бұрын
It is! I haven’t been brave enough to try yet 🙃🫠
@karatohongkongcat
Жыл бұрын
Very well explain! Ty I’ll try mine giddy! 🎉
@ginamariegarcia9461
7 ай бұрын
I don't have that setting
@johnbarnette3916
Жыл бұрын
dont they mnake special glasses for that?
@hooked_fish
Жыл бұрын
You cut leather Patch and en engrave ? In xtool m1?
@KarleyHall
Жыл бұрын
I haven't tried. I have a video of the process using my Glowforge-- but haven't tried on my M1 yet.
@coleminorkustoms8594
Жыл бұрын
Great video, FYI on my machine I’ve been able to use 85 power and 60 speed and the results have been great, with the same cup.
@gabrielqb89
Жыл бұрын
Im curious, did that dramatically affect how long it took to get done? Like did it save more than 5 minutes if any time?
@thewordillustrated
3 ай бұрын
Hi you are great at explaning how to use the tool. I want to ask if you use the air purifier in the place of the air assist or the large x tool air machine. not sure what its called thanks. Im looking for another option to clean the air.
@YouTubing1021
2 ай бұрын
how big circumference objects can fit ?
@bradkuhlemeyer8422
6 ай бұрын
What is the best image to use u said svg or bit map something like that and is there a web site
@justinecolville-buckley916
Жыл бұрын
Thank you for making a simple and easy to follow video with no fluff :)
@kaylaperdue968
Жыл бұрын
Have you ever done a cup like this with a handle?
@chrisbuck1859
Жыл бұрын
Use a jaw chuck component,then turn it around
@corydrichmond
4 ай бұрын
Does the masking tape help fight the image warping?
@KarleyHall
4 ай бұрын
No it does not
@heidispencer1561
Жыл бұрын
Have you tried other size tumblers? My M1 will not correctly engrave any size I try and separates the svg and smears it all over the cup...I am burning through a clients YETI tumblers and I am so disappointed in this xtool that I am about to return it for a refund. Thought I would ask before returning it
@lacydickey4456
Жыл бұрын
This helped a ton thank you! I'm having issues with light colored tumblers smudging with the black when I go to clean them off... Any tips to avoid that? Using Mr clean white eraser and I've used the awesome spray 😢
@blueskyjax
Жыл бұрын
I just got everything setup per your video, my image is a jpg from svg less than 1MB it is taking forever to render a preview so I can start it, is that normal? It's stuck
@TheBPStudios
8 ай бұрын
Super helpful, thank you so much! I'm going to try my son's Stanley (old style thermos) today using your tips!
@brianetherton7303
Жыл бұрын
Magic Eraser FTW! Thank you so much for this tip! I thought my tumblers were doomed!
@Andreasideregts
Жыл бұрын
Hiiiii I just graves a tumbler and it’s look dark why? Can I send you pictures
@heathercaron4065
9 ай бұрын
thank you so much for your tutorial it was very informative and I was able to do it on my first try!!!
@MsPark-wv2qt
9 ай бұрын
I lost my measuring tape.. Anyone have any suggestions...?
@terrigalloway3442
Жыл бұрын
May I ask if you have tried cutting gold and silver acrylic. Also, would it make a difference if you left on the protection sheet on the acrylic ☺️
@edwardharmon1527
Жыл бұрын
I’ve been considering the xtool, I want to etch glass as well. Is this a good fit for me
@spideyprince7077
Жыл бұрын
If i have a Object that is not round and not flat, how should i engrave it?
@joleneuccello3588
Жыл бұрын
This is such a great teaching!!! I have watched 3 times. My M1 comes in Monday and I have a large order to engrave
@MagsSubbly
Жыл бұрын
Fabulous video and very helpful for a beginner...I'm about to embark on my first tumbler so I'm sure you'll be in the background to help me lol..thank you so much for your time to do this
@SandySimmons-rj2hc
Жыл бұрын
Thank you for the video. This really explained things I was still confused about.
@jenn6471
Жыл бұрын
Will this work for sublimation tumblers
@msgreen906
Жыл бұрын
Do you need to buy the riser box to do flasks?
@ginamariegarcia9461
9 ай бұрын
You are a wonderful teacher
@genevadennis153
8 ай бұрын
Excellent tutorial!
@leeannalexander4705
Жыл бұрын
Thanks Karly. Great video! Can’t wait to try mine
@idejoseph
Жыл бұрын
Hi Karley. Thank you so much for your awesome videos! Can you please tell me the actual name of your air purifier? The link doesn't work.
@TheBPStudios
8 ай бұрын
Looks like the one I have - Winix C545
@blueskyjax
Жыл бұрын
Very helpful thank you so much!
@caribguy2007
Жыл бұрын
First time i have ever heard cameras cannot look at the laser. Ive seen many do it and ive done it.
@KarleyHall
11 ай бұрын
Yah a lot of people don’t realize! It can ruin a camera sensor and I spent too much on mine to risk it!
@katherinevalenciagallagher5749
Жыл бұрын
Hi where did you get the tired mom svg? I love it!!
@KarleyHall
Жыл бұрын
Thanks! It’s my design 🥰 www.etsy.com/listing/1285144165/tired-moms-club-svg-cricut-silhouette?
@SpecialK2644
Жыл бұрын
It takes 41 minutes for 1 tumbler?
@KarleyHall
Жыл бұрын
Haha yah it’s not fast! Diode lasers like this are so slow!!! But you get what you pay for!
@crazymangochic
Жыл бұрын
Karly- do you like the Xtool over the glowforge? I'm on the fence on which I should get. I like the xtool so far. What are your thoughts?
@KarleyHall
Жыл бұрын
If I need to laser cut anything- I use my glowforge! But if I need to engrave a conical shape- only option is the xtool! So my glowforge gets much more laser time! It can cut clear and light colors since it’s a CO2 laser and is way faster!
@crazymangochic
Жыл бұрын
thanks for your feedback! I was under the impression you had the glowforge aura. You must have the Pro glowforge@@KarleyHall
@KarleyHall
Жыл бұрын
@@crazymangochic yes- I have a glowforge pro! I’ve had it since 2018 or 2019! It’s well loved!
@TomNaylor-bh3mu
Жыл бұрын
Hi Karley where to get the risers? haven't seen these before Thanks T
@KarleyHall
Жыл бұрын
They come with the Rotary Attachment 2 Pro!
@TomNaylor-bh3mu
Жыл бұрын
@@KarleyHall Thank you Karley, actually received everything yesterday..
@mrbaalloo
Жыл бұрын
Is your M1 a 5W machine or 10W? Just wondering if that would have an effect on the power settings.
@KarleyHall
Жыл бұрын
Great question- I have the 10w. You’d need to adjust your settings if you have the 5w. :)
@mrbaalloo
Жыл бұрын
@@KarleyHall thanks!
@chrisbuck1859
Жыл бұрын
@mrbaalloo hey I'm having the same problem did you figure out what settings you needed?
@tomcollick8111
Жыл бұрын
which rotary tool is this? I have the Makerblock ! Xtool and it did not come with the holder for the end of the cup or the level.
@KarleyHall
Жыл бұрын
This is the Rotary Attachment (the second variation!). It’s linked in the video description. It’s a really cool attachment!
Пікірлер: 66