Thank you for this thorough tutorial. I've watched several others and they didn't go into how to setup every part of the rotary tool.
@EvelynPineda-i8y
Ай бұрын
I have watched this video a bunch of times from this login and my other login on my tablet!!! So informative and very helpful. I am working on my second 40oz with a handle and it is coming out beautifully. The first one was just ok. User error as I did not follow the very important step to make sure the cup was level as the bottom instead of the top. DO NOT MISS THIS STEP!! I am still trying to figure out how to get my xtool m1 ultra to go over the handles with out getting in the way. I ordered a tab tool from etsy, but got nervous at the last minute, so I shrunk my image to avoid them on the one I am engraving now. Thanks so much!!! Cant express how amazing this video is!!!
@michellegloudemans2434
Ай бұрын
thank you so much! I have been searching for a video to show me how to line up the start of the design. Brilliant!
Thank you so much, very clear and easy instructions to follow.
@stephaniespivey8951
5 ай бұрын
Wow! Thank you so much for this tutorial. Very thorough. And thanks for showing how to do this on the S1 20W. Not many vids out there on this one. I'll be sure to subscribe to your channel too!
@HopeDesigns
13 күн бұрын
Very helpful. I'm a tad confused why the length of the cup is 8.875 and not 9 because I'm measuring the same cup and it's 9".
@cubansli3099
6 ай бұрын
Thanks great detail.
@tesspick
4 ай бұрын
That was awesome! I hope to try it tomorrow. One question if you use the chuck and it doesn’t turn do you have any idea as to why it won’t rotate? Mine just went in a straight line.
@LilyRoseCraftroom
4 ай бұрын
Did you connect it to the machine? It needs power to rotate.
@kimberlymartinez7610
13 күн бұрын
I tried a white tumbler and it’s not engraving right I’m so annoyed with how it keeps coming out
@ronr179
3 ай бұрын
1 👍🏽 for every one I do with your settings
@mariamoo4568
5 ай бұрын
You’re so inspiring!! I love all your videos! You just convinced me to purchase mine 🫶🏼
@ronr179
3 ай бұрын
Another 1 👍🏽
@KarloPedrin
2 ай бұрын
Hello, has anyone else had trouble engraving images with the xTool S1 where the image comes out in a different size or distorted?
@MelodySims-p5g
4 ай бұрын
how do you get your tumbler to stay on the rotary tool? I have the same cups as you in this video and they just keep sliding off and it's worse when I tighten it more. Please help!
@ronr179
3 ай бұрын
You don’t slide the cup all the way because the inside curves makes it slip off you need to align the tabs at the end of the threads of the inside
@MelodySims-p5g
Ай бұрын
Thank you!@@ronr179
@Roci02
6 ай бұрын
Wepaaaa mujers loved this educational video.... The final looks amazing ..... Yessssss TRUST THE PROCESS chula lol.... Please make more videos of these and other projects u can do with it (especially acrylic jeje).... Im in the reserach mode cuz I want ger a laser machine .... Bonito dia hermosha
@LilyRoseCraftroom
6 ай бұрын
Thank you so much!! Yess I am definitely going to be posting more videos about it💖
@Forensicfiles-n6e
4 ай бұрын
how do i get in direct contact with u i need help plz
@manuelaglade6900
2 ай бұрын
👍
@derekharris1661
5 ай бұрын
You failed to mention how far away the lazer should be placed from the cup
@ronr179
4 ай бұрын
That’s because the S1 auto measures and she did mention it @ 20:26
@drkline69
2 ай бұрын
She did it but didn't show the laser doing the autofocus. There were a few things that she should have shown the laser doing but only showed her pressing the button in XCS.
@ronr179
2 ай бұрын
@@drkline69 I’m sorry that your struggling to know the basics of the machine. I gave you a solution but it didn’t seem to help 🤷🏻♂️
@richardchildressjr3698
Ай бұрын
My design came out backwards. Hoe do I fix the issue?
@joseacosta9136
22 күн бұрын
i think your rotarty tool is backwards. The logo on the RA2 tool should be readable not upside down if that makes sense
@suzannetorres6652
3 ай бұрын
Nice Video! Perhaps you have mentioned it in the video but how did you set the design to ensure your tabs do not get engraved or your image overlap them? Many thanks!
@frances7862
4 ай бұрын
Thank you so much for your videos, they have helped me alot. I have the riser but when I level the tumbler on the lower section the laser head will not clear the top part. Anyone have this problem. Thanks, Frances
@MattJurek
4 ай бұрын
Video makes no sense to me, my laser cant even find my tumbler and I cant figure out the orientation.
@jowwi1576
2 ай бұрын
I have the exact same problem. Non of these video's are helpfull😢
@IgniteHP
27 күн бұрын
@jowwi1576 ready to sell both my machines. No support or help
@joseacosta9136
22 күн бұрын
I feel the same way
@jeffrangel93
6 ай бұрын
Question on the angle placement when attaching the tumbler to the chuck. When you angle the bottom does the tumbler attached to the chuck lift up?
@jenmarkosian8720
5 ай бұрын
Do you get the Stanley 40 oz tumblers at a wholesale price somewhere?
@chantaldowling4342
6 ай бұрын
I received the S1 yesterday. I noticed in the software the canvas is like yours is in the video where it’s landscaped but as soon as I change it to rotary attachment and chuck it flips the canvas to portrait orientation. I am using the RA2 Pro rotary that came with the S1 rotary kit.
@ronr179
5 ай бұрын
Did you ever try your new settings for the soft touch tumblers? If so what did it end up being?
@LilyRoseCraftroom
5 ай бұрын
Yes! I now do 100 power/ 300speed/ 160lpc
@ronr179
5 ай бұрын
Thank you for the reply I used your link to make my purchase and it comes tomorrow!🎉
@ronr179
5 ай бұрын
The settings you used in this video are for the Matte tumblers from save a cup?
@m19710310
19 күн бұрын
Two questions: 1. The laser focus has changed a lot between the top and bottom. I thought it is more sensitive to laser focus. Is that right? 2. Didn't the magic eraser scratches the surface? Thanks
@HeatherArquette
Ай бұрын
Thank you so much! Question.... when I raise the bottom to be level, the top part gets uneven and while spinning, gets wobbly.. how do I solve this? :(
@ScratchEm1
4 ай бұрын
Question! My canvas is not horizontal and is vertical. How do I change the orientation? Haven’t found anything on how to do that. Thank you!!
@ronr179
3 ай бұрын
Make sure your using the tab under rotary attachment and simply rotate your image
@kyodox495
6 ай бұрын
anyway we could get a video on a Stanley the tapper is alot more extreme
@LilyRoseCraftroom
6 ай бұрын
Yes absolutely! I'll have it posted soon.
@kyodox495
6 ай бұрын
Thank you so much my 40 watt will be here Tuesday 😊
@LilyRoseCraftroom
6 ай бұрын
@@kyodox495Hey. engraved Stanley video has just been posted!😉
@CardCrazeeHeather
20 күн бұрын
This is the best tutorial I've found. Thank you.😊
@heathertreit8852
19 күн бұрын
what settings do you use for the glossy tumblers and not the powder coated tumblers?
@italliaaa9201
9 күн бұрын
Just ordered mine today🙏🏽🙏🏽🙏🏽🙏🏽🙏🏽
@robbincompton1133
4 ай бұрын
What a very informative video! Great info. Thanks so much!
@hsepulveda1
4 ай бұрын
LilyRose, you give the best instructions on this! I cannot wait to try this out.
@KeithKing-z5t
4 ай бұрын
Tumbler link?
@ruthbarker7967
Ай бұрын
I couldn't ever get my cuke to unite. Way longer than your 7 minutes, and I tried several times. I ended up using a png for instead. Definitely needs some tweaking, but for a first try, I'll take it. Same machine as you, in green.
@newbie2guitar
16 күн бұрын
Actually you don't have to unite vectors anymore. Make sure your version is 2.0.117 and set it all to engrave. Click on the workspace and change where it says processing path and change auto planning to user defining. And you will see a setting that you can turn on to engrave all at once. As long as all the engravings are on the same layer it will treat them all as one image. No more need to combine unite.
@ufoquilter86
6 ай бұрын
Amazing
@sweetp1015
6 ай бұрын
Can this be done with a Co2 laser also?
@LilyRoseCraftroom
6 ай бұрын
Absolutely
@uxo2255
3 ай бұрын
I think you may be mistaking on which end is the chuck I've always thought the chuck was the side that has the teeth/claw. Can you clarify?
@halleyzettlemoyer7302
3 ай бұрын
Is noticing a little bit of an odor normal while doing tumblers? I have the air assist and the machine vented but still got some smells here and there! I put some painters tape around any cracks I found to help in the future!
@ANGELAWHISENHUNT
2 ай бұрын
Love this video. it gave the the push i needed to order my rotary. Quick question though I have a 10w do you know about where to start with settings to test? love the video
@CrystalRoberts-lq9ri
4 ай бұрын
we followed all your steps but it didn't put the image centered on the cup why doesn't the laser placement matter? how do we know its putting wrap where it needs to be.
@FlorQuezada-k8f
Ай бұрын
thank you so much for all the info!! im thinking about buying the S1 xTool bundle.
@sally969
4 ай бұрын
Wow! That was intense but worth watching. May I ask what a cup like that sales for? With full wrap?
@CynthiaMaldonado-bo4bt
2 ай бұрын
Hi! How do i do ir for my laser to engrave the bottom part of the tumbler? It only does the top part.
@lgovantes1
4 ай бұрын
Great video. Can you elaborate on time spent per unit, unit cost, and selling price?
@og8403
4 ай бұрын
when you auto-measure at the top, doesn't it hit the tabs that hold the handle when it is rotating?
@allanbourner4569
3 ай бұрын
For all round focus would it be better if you done it as a curved base?
@chestersukekane2265
6 ай бұрын
Does the brackets get in the way of the laser?
@aquanator313
6 ай бұрын
Can you use the 40w to do this?
@lyperez0218
5 ай бұрын
Great video Thank you so much 🩷
@Jmont5-
6 ай бұрын
Excellent instructions. Thank you!
@trini4040
6 ай бұрын
Thank you very much for this amazing detailed video. I was able to engrave my first tumbler last by using your instructions. Great job !!! XCS has a curve feature, can we use this for the slope at the back of the tumbler ?
@LilyRoseCraftroom
6 ай бұрын
Thats great to hear! 🥰 I'm still new to xcs i havent learned the curve feature.
@derrickhoward6000
3 ай бұрын
👍👍👍
@garethwatcham7792
5 ай бұрын
Great Video, thank you - Does the distance sensor / probe not got caught up on the handle fixings, it looks really close?
@ronr179
3 ай бұрын
No this is why you need to bend the tabs down
@pamelabrown3057
3 ай бұрын
since the bottom diameter is less than the top does the design adjust?
@LilyRoseCraftroom
3 ай бұрын
Yes it works out.
@sandypressley8301
5 ай бұрын
👍🏻
@MinuteMotivator-1
6 ай бұрын
Any reason you didnt max out the speed and adjust the power to match?
@LilyRoseCraftroom
6 ай бұрын
I heard max speed moves the Rotary attachment too much. I haven't tried it. This has been working for me.
@3dpropsplay
6 ай бұрын
when I click combine unite it doesn't do anything Also my XCS looks a bit different and the stuff aint on the same place so im just very confused Update: it worked after a while waiting, for some reason there's not a loading/generating bar on my end
@LilyRoseCraftroom
6 ай бұрын
It takes a while to combine. It took about 7 minutes. Do you also have the 2.0 software?
@Makingstuffforfun
5 ай бұрын
So I had the same issue and I found the only solution is to upgrade to the newer 2.0 beta version that is out. The older software didn’t do anything for me either.
@ronr179
5 ай бұрын
Xtool just added a additional $20off and adding a $100 coupon brings the bundle to $1799 I will be using your affiliate link to purchase. TY keep the tumbler tutorials coming!
@LilyRoseCraftroom
5 ай бұрын
Thank you! I appreciate it! Currently working on more videos!🥰
@BINKSTARZZZ
14 күн бұрын
49min. Then how much you sell them if it takes 49min. 🙈
Пікірлер: 90