why would humans make such a stupid washing machine
@divine2118
7 жыл бұрын
Thanks for putting this video up I just back home and my washer was not working I thought the kids broke it lol!! U saved them 😂
@GioRodz
6 жыл бұрын
Very helpful, thank you!
@DC-qu3jq
7 жыл бұрын
Omg thanks so much. I just had a repair person come and my washer ran fine after the diagnostics he ran but after 2 loads it went right back to dumping the water out after filling. Thank you for this tip, I can't afford to keep taking off work for them to come.
@nrobertson2989
7 жыл бұрын
Persia Blossom mines do the same thing I'm so oooooooo oooooooo tired of it
@TheSAboutique
7 жыл бұрын
Persia Blossom i just got mine yesterday (monday) and have to have a technician come out on thursday. the cycle stops at wash...i did the diagnoatic and was able to do one load before the 2nd load got stuck ob wash again
@JackiesOasis
7 жыл бұрын
The wash light won't turn on when it's washing it stays on sensing fill then it skips wash goes straight to rinse.
@CrixusHeart
6 жыл бұрын
While I appreciate this video, how do I interrupt the results?
@dorothynicholas3557
7 жыл бұрын
How do I get my washer to wash small loads.i mean less water.
@kashdee8159
6 жыл бұрын
my final spin light is blinking, tried to reset. it still doing the same thing. Any ideas that can help me??
@gman7377
7 жыл бұрын
Amanda is so bad.
@landobo
7 жыл бұрын
my whirlpool won't go into diagnostic mode. the sensing light is the only light that is on. Please help!!
@Carskinify
7 жыл бұрын
All these washers do is fill up with water,agitate.pump the water out and spin more of the water out. Washers have been doing this for a 100 years. Now we need all these ridiculous flashing lights. Nothing but crapola.
@narkeithachandler1347
7 жыл бұрын
on my Amana washer it make noise when it is on auto sensor
@BeST_70
7 жыл бұрын
My amana makes clicking noises throughout the day and the lid will often lock on it's own it's down. Any idea how to fix this problem?
@whirlpoolhomeappliance5481
7 жыл бұрын
maybe with the control board also make sure the drum is not moving with the lid closed. also ours also makes click throughout the day too so I assume that it's normal.
@alial-ashail3015
6 жыл бұрын
Thank you!
@km4hr
7 жыл бұрын
Is there a document anywhere that explains what the diagnostic codes mean?
@whirlpoolhomeappliance5481
7 жыл бұрын
inside the washer there's a tech sheet in the front left corner in a plastic bag.
@gregharned8906
7 жыл бұрын
Thank you for the great video. I just bought a used washer and wanted to run the automatic test. For those that would like the text instructions I have pasted them below: Washer automatic test cycle for Amana, Kenmore, Roper and Whirlpool washers 1. Turn the knob to normal. 2. Unplug the washer and wait 5 seconds then plug it back in. 3. Spin the knob 360 degrees 4. Left one notch 5. Right three times 6. Left again 7. Right (Amana: All the lights will come on) 8. For automatic diagnostic mode - go right two times (Amana: Spin light will come on) 9. Push start. The lid will lock and the final spin light will also come on with the cycle complete light a few seconds later. 10. Wait for the cycles to complete then you are done. On the Amana a "Cycle Complete" light will come on. If you have comments or changes, please let me know and I will update them.
@whirlpoolhomeappliance5481
7 жыл бұрын
You are welcome!
@Photomeike
7 жыл бұрын
These instructions and video helped me out a lot! Thanks so much!
@Photomeike
7 жыл бұрын
This may be silly and pretty obvious but did you check to make sure the water/faucet is turned on. As silly as it may sound I am renting and my landlord installed this washer for me and i found this video in hopes that it would help solve the issue. It did the diagnostic but wouldn't complete for me. I finally figured out that the water turned off and my landlord never cut it back on to see if it work. But if you are much smarter than me and have already made sure of that then nevermind my dumbass. lol
@IMSiegfried
7 жыл бұрын
Hey, it happens. Once my parents called a TV repairman to come out. The TV repairman turned the light switch on and voila, the TV worked. :-)
@IMSiegfried
7 жыл бұрын
I did this and my Amana completed the cycle. Does that mean there are no error codes or am I missing something? I also tried running it again after Automatic Diagnostic Mode and I still have the same problem. re- it won't spin. Any ideas? Thanks!
@shanewilliams6077
7 жыл бұрын
my sensing fill light just blinks any ideas?
@whirlpoolhomeappliance5481
6 жыл бұрын
Try cleaning the screens behind the washer where the inlet hoses are attached and check for sediment.
@misswildfire
7 жыл бұрын
Okay did this but lights didn't come on and it won't go into diagnostic mode.
@whirlpoolhomeappliance5481
6 жыл бұрын
Unplug the washer wait for 5 minutes and try again. Remember, 1FULL ROTATION - go left - right - right - right - left - right when all the lights come on and turn the nob until just the WASH and SPIN light come on then press START
@joimprove
7 жыл бұрын
I have the admiral and it's not spinning I did the diagnosis and got no results
@whirlpoolhomeappliance5481
6 жыл бұрын
watch some more videos i recommend appliance video.com it could be the capacitor or control board that needs to be replaced.
@erickgalan2496
7 жыл бұрын
so I just purchased a Amana washer machine. it was working fine. now it stays on. wash. I have to do everything manually. what happen? is it an easy fix?
@erickgalan2496
7 жыл бұрын
me as well
@nadiabullard1124
7 жыл бұрын
Erick Galan how do u do it manually everytime i fill it up.it lets the water out
@whirlpoolhomeappliance5481
7 жыл бұрын
check the inlet hose screens
@hunkt03
7 жыл бұрын
Can you also put clothes when doing this ?
@gregharned8906
7 жыл бұрын
Mikey trejo, Since the diagnostic mode does not run a full cycle, I would not put clothes in the washer when you do this.
@krystle7405
7 жыл бұрын
mine stopped on wash light....wtf
@TheSAboutique
7 жыл бұрын
Krystle Troxell mine is doing this too. Did you ever find a fix for it?
@arnoldreyes9006
6 жыл бұрын
Mine did the same.
@ms.curenton4436
6 жыл бұрын
Did you get this fixed? I am having this issue right now!
@HowsaBowsaYowsa
7 жыл бұрын
What does running a diagnostic mode do? Does it fix something?
@whirlpoolhomeappliance5481
7 жыл бұрын
tests and resets the machine.
@ritajohnson2372
7 жыл бұрын
I was doing a load of clothes, and my electricity got cut off how do i get my lid unlocked
@whirlpoolhomeappliance5481
7 жыл бұрын
unplug the washer and plug it back in once or twice. if the power is back on you can do this.
@ShawnToohey
6 жыл бұрын
is there a way to get into it without electricity?
Пікірлер: 52