The sound quality of my JBL Charge 3 inexplicably went awry. It didn't sound JBL anymore. I was fortunate to have come across your video. My Charge 3 is now back to it's awesome level. A million thanks. You're godsend!!!
@UtechUreview
3 жыл бұрын
Thanks Jorge. Glad your sorted. Dont forget to subscribe and share. Helps the channel grow. Appreciate the feedback
@rayansdk1046
2 жыл бұрын
Same
@veryyuckyverytasty1027
3 жыл бұрын
came in handy during the lockdown with the kids. was able to resolve my bluetooth connect issues. thanks so much for your time
@sarahfekumo
Жыл бұрын
Thank youuuuuu😢 for this video for two years I thought my jbl has gotten spoilt I almost threw it away because the Bluetooth won’t work, but now it’s working and I am super happyyyyy!!!
@UtechUreview
Жыл бұрын
Thanks for the feedback Sarah. Appreciated, Glad I could be of some helped and your sorted. Don’t forget to subscribe and share. Helps channel grow. Have a great weekend
@tracy85777
Жыл бұрын
My original JBL 3 that I've been using for a few years stopped working without it being plugged into the charger. Is the battery bad then? The two little ones (flip 5?) just stopped working. I used them for three years I think and I always take very good care of them. New batteries needed? Any thoughts? By the way your videos are great! Very professional, easy to understand (even for someone like me who isn't well schooled in technology) and you had everything right in front of my face so I could see what you were talking about. And no distracting background music or anything else. Very well done and greatly appreciated Sir! Thank you!❤️
@UtechUreview
Жыл бұрын
Hi Tracytinnon2988, is your battery showing one red dot or on continuous flashing white charging light? Was your JBL 3 totally drained before attempting to charge? If totally drained, leave it to charge for a several hours and hopefully should come back on after powering on. If it’s erratic after powering on, then Might be a software glitch and your JBL would need factory resetting as well as updating your JBL fimware app e.g on your mobile phone bespoke to your JBL model. It could also be that the number of cycle charge your recharging battery is allowed or useful life has run out and as such would necessitate a service or replacement. Hopefully would soon a demonstrate how you can change your battery in a subsequent video . Unfortunately there is no way to test externally the capacity of your battery before ordering an aftermarket spare but would also demonstrate how to do this in a subsequent video during servicing . Suffice to say, the probable root cause may be a battery or some other reason so you have to be 100% sure it’s a battery before ordering wasteful costly replacements that’s not needed. Nevertheless, The battery has the highest proclivity so worth swapping that to see if there is a remarkable improvement. Also thanks for the feedback. Appreciated. Let me know how you get on and the current status of your JBL. Look forward to hearing from you. Don’t forget to subscribe and share. Helps channel grow. Take care
@tracy85777
Жыл бұрын
I don't have a JBL app. When I checked playstore the apps all said in the comments that they didn't work properly. I've noticed that on EVERY app I've looked at recently and I'm not sure what that's all about. I have my theories but... So do you recommend an app? I've never had anything on this phone to work with my speakers. A few years ago I had a phone that I could change things on the JBL and on my Beats. When I checked out the apps for beats the comments were negative also. Any suggestions? The reason I originally watched your video was for my new JBL 3 speaker. It startled cutting out after a couple days of using it. My daughter had connected it to her phone while she was vacuuming for me. It was working fine before that. I have no idea if connecting it to her phone could have caused this to happen. As far as the first JBL 3 that I keep plugged in to use... well all the white lights are on until I unplug it from the charger for a minute and then it just stops. So I don't know if I should order a new battery or not. I'm sure my oldest son could put it in the JBL for me. I saw them on eBay or somewhere for about $18.00. For what that speaker cost me that's very reasonable. Do you have anyone you trust to buy new batteries from? Most of these are from China. Doesn't JBL make these speakers in China? I'm not too happy with China right now. The government anyway. So here I am. A Gramma looking for answers and I'm so grateful for your help. Thank you!
@tracy85777
Жыл бұрын
So I reset the JBL 3 and it's still cutting out. Did I not comment about this? I hope I didn't comment on the wrong channel good night?! Anyway all the white lights across the bottom were on when I reset it and the blue light on top. Then the lights on the bottom went away and it started playing and cutting out. Ugh!!! I hope I didn't get ripped off! It was working fine for two days! One more question. Can you have too many jbl's and beats connected? Could this cause a problem? I don't know how since it was working without cutting out before my daughter used it. This is frustrating!
@SevenVeilsMusic
Жыл бұрын
Thank you! My Charge 3 didnt wanted to receive aux input. But now it works. Timestamps really helped!
@UtechUreview
Жыл бұрын
Glad you are sorted SevenVeilsMusic and I could be of some help. Appreciate the feedback. Don't forget to subscribe, like and share. Helps channel grow. Have an amazing week. take care
@gnrkid08
Жыл бұрын
My JBL charge 4 quit putting out any sound at all, it won't even do the start-up and shutdown noises like it always has. It appears to be connecting just fine to my phone and had no issues powering on/off. I've tried doing the reset tricks and verified that it is up to date on the firmware but I've had no luck whatsoever. Do you have any other recommendations for trying to fix it? I'm about ready to look into sending it to JBL for a repair but I'm sure it won't be cheap.
@UtechUreview
Жыл бұрын
Check to see that the software on your computer, Mobile phone and the firmware on the JBL app are up to date. Also check to see if the cable you are using is genuine and not broken. If you reset once and it doesn’t resolve the problem. Rest twice or thrice. Turn on your JBL device and let the battery drain out then charge up fully without switching on if this doesn’t work. It definitely is a software glitch or bug or perhaps the issue is with JBL and not your speaker. Probably they might send out a bug fix sooner or later as software plugins usually require maintenance. So be patient or you could take it in for an inspection if you still have warranty. Let me know how you get on
@suzanatutu322
3 жыл бұрын
thanks for taking the time to explain. sorted my issue. nice vid and clear audio.
@santoshkatha7748
Жыл бұрын
In my JBL charge 3, I pressed power & + buttons simultaneously for 3 seconds. It's working now. Thanks
@UtechUreview
Жыл бұрын
Thank you and appreciate the feedback Santosh. Glad you are sorted, up and running and made up for you. Don’t forget to subscribe and share. Have a brilliant week ahead. Takecare
@__Paul__
2 жыл бұрын
I tried to do a reset on mine, so that it would erase all previous bluetooth pairings. However, after doing so, I can power it on, but it quickly powers off, and I cannot get it to operate back to normal. This video, nor any others I have found actually address the issue I am now facing.
@UtechUreview
2 жыл бұрын
Hi Paul, firstly what device did you reset? A 3 or 4? Is your JBL app firmware up to date? Are you using the original cable to charge your JBL or is your JBL cable broken? how many led bars do you have on your device before it powers off 1,2,3,4,5? What are the colours of your LED charging lights? Red or white? is your device fully charged when erratically powering off and how many hours did you charge your JBL device? Were you experiencing battery power related issues prior to resetting? In some instances, your JBL speaker may also think its battery is lower than it actually is. If this is the case, you will have to factory reset your speaker in order to correct its corrupted charging logic, The amplifier in the speaker is usually equipped with a built-in protection circuit. These circuits are designed to protect the amplifier from destruction when a short occurs. Therefore, when things get heated inside the speaker, the circuits shut down whatever is causing the heating and in doing so it may be causing the switching off of the speaker. So is your mains or socket and JBL speaker experiencing voltage or current surge, short circuits, sparks or partial connection? Is the port of your JBL speaker collecting water which can cause a short or did you mistakenly drop the micro usb Charing port of your charger in water or coffee?
@__Paul__
2 жыл бұрын
@@UtechUreview My device is a Charge 3. I have the JBL portable app, but due to the device being unable to stay powered on, it will not pair. Since it will not pair, I currently cannot check to see if firmware on device is latest and greatest. (Note: The device will power on when a charge cable is connected, but it in that situation, it will not answer to pairing requests. I should also point out that when the device is powered OFF and a USB / charging connection is made, only the the charge status LEDs are on and / or flashing. However, in the current state, the power button is also ON (constant), despite the device being "off" before connecting the USB cable, if that makes sense. Any and all LEDs that currently come on are white. My device is fully charged, and I am confident the battery is fine. Before my factory reset attempt, I experienced no problems with the device. (Factory reset attempt was ONLY to erase all previous pairings from its memory.) The device or its ports have been exposed to dirt or fluids of any kind.
@UtechUreview
2 жыл бұрын
@@__Paul__ assuming there have been no trip out or surge current to your devices electronics and given all conditions earlier highlighted have been met, have you attempted or are you able to reset again? JBL speakers have an automatic turn off feature that switches the speaker off if it does not play for 10 to 15 minutes. If you let your speaker stay idle without turning off, it will switch off automatically. This feature may be annoying if you are using your speaker as a computer speaker. To solve this, you need to disable this auto-off feature. However, since this is a design you cannot do away with, you can keep your speaker switched on the whole time by letting your speaker play audio on very low volume. This way, you will be able to keep your speaker switched on with minimal distraction. Perhaps your device device is experiencing transient glitches and should be back to full throttle in a few days, if powered OFF. What are you trying to pair to ? Computer, phone? Are you able to turn ON and OFF blue tooth prior to pairing to improve connectivity and have the non JBL device software version updated to accommodate bugs and fixes? Your LED bars are full white and lit up so that indicates that you have power in the device? Did you reset the device with low battery or full power? Try resetting the device with your AC cable or plug and if that doesn’t work reset with battery only. A speaker that refuses to turn off or keeps turning off can often be resolved by resetting the speaker. If this fails to resolve the issue, then letting the battery run out to reset the charging logic usually works in this instance. If your speaker is shutting off by itself or won’t turn on, it may not be charging due to a broken charging port or charging cable As for the speaker turning off automatically, JBL has a feature where the speaker will turn off if nothing is connected to it for 10 minutes. This helps preserve power, and so it’s nothing to worry about. But if it’s shutting off during music playback, then the issue could be that the battery is on low power due to the charging cable or charging port not supplying power to the device. Try swooping with a non defective cable. If your JBL speaker keeps turning on and off by itself, then that is certainly not normal. JBL speakers don’t have a feature where they automatically turn on, so this shouldn’t be happening. The possible explanation for this would be that the power button is being activated by dust underneath it or the circuit board is faulty. Let me know how you get on
@__Paul__
2 жыл бұрын
@@UtechUreview Sure, if my speaker were working normally, it would automatically shut off after a certain amount of time, if there is no music being played, and I totally expect that. However, I should have clarified further that when I mean it will not stay on, in my specific case, when you attempt to power it on, the power button comes on as well as all the battery LEDs (everything in white), but will only stay on a few seconds, then powers off. That is my current problem. This behavior started occurring after resetting the speaker. (I reset it because I wanted to remove all previous bluetooth pairings, as I already had 3 paired devices, which I think is the max number for my model, and I wanted to pair the speaker with a "4th" device, which was not one of the prior 3 that had successfully paired.)
@sski1338
2 жыл бұрын
@@__Paul__ same thing here..
@joesnow7908
Жыл бұрын
thank you i was worried I had to get a new one ur a life safer man
@UtechUreview
Жыл бұрын
Thanks Joe. Glad you are sorted and appreciate the feedback. Don't forget to subscribe and share. Helps channel grow. Have a Brill Weekend.
@notablynorsk
Жыл бұрын
Your video showed me how to fix my issue in 30 seconds! Thank you!
@UtechUreview
Жыл бұрын
Thanks Helen. Appreciate the feedback. Glad you are sorted and got there in the end. Don’t forget to subscribe and share. Helps channel grow. Have a fantastic weekend
@joshii_shbzt
11 ай бұрын
I love his video editing😂
@tonyjtaps18
3 жыл бұрын
The power button of my jbl charge 3 is faulty, difficult to switch on and swift off, after resetting to everything went perfect, problem solved, thanks to this very helpful video. Salute.
@UtechUreview
3 жыл бұрын
Glad you got it sorted Tony. Don’t forget to subscribe and helps channel grow. Appreciate the feedback and have a great weekend.
@jegor30
Жыл бұрын
Thank you very much you fixed my JBL 3, you're a legend.
@UtechUreview
Жыл бұрын
Appreciate the feedback Jegor30. Made up for you, you got there in the end and glad I could be of some help. Don’t forget to subscribe and share. Do have a wonderful weekend and stay blessed always.
@Rev1960
3 жыл бұрын
Thank you. My speaker was not charging up even after reset and after software update solved my problem.
@EkalGGWP
3 жыл бұрын
How to get the software update?
@kevinlin3014
3 жыл бұрын
@@EkalGGWP jbl portable app
@williamparrish9073
2 ай бұрын
Hi I have a charge 3 and no sounds come out of it, not even the sound when it powers on. I’ve tried resetting it, demo mode, and locking and unlocking it. It connects to Bluetooth fine, connects to the app fine, updated the firmware fine, but no noise at all. Any suggestions?
@aleksandrkostin8138
Жыл бұрын
Hey, thank you very much, i did enjoy my song more afterwards. It seems to remove this fogging - more crisp EQ, i would say with less brown noise. Thank you again!
@UtechUreview
Жыл бұрын
You welcome Aleksander and glad your sorted. Don’t forget to subscribe and share, helps channel grow. Have a wonderful weekend
@BobbeeSingh
2 жыл бұрын
Is there any way to check what all devices have connected to the speaker so far? My speaker was not connected to wifi or any other Bluetooth device in the house but it was playing 80s songs when I got home. Scared the hell out of me
@UtechUreview
Жыл бұрын
Apologies for the late response, must have missed it somehow, check settings and blue tooth on your mobile to see the list or WIFI and Bluetooth icons at the top right of your computer to turn on and off and to see what devices are connected. Hope this helps. Have a great week ahead
@jasonfein7810
2 жыл бұрын
Thank you, thank you, thank you!!!!! I was about to throw this thing out with the rubbish... Paired on first try after reset.
@UtechUreview
2 жыл бұрын
Thanks for the feedback. Appreciated. Don’t forget to subscribe and share. Have a great weekend
@l0ngle192
3 жыл бұрын
sorry i have question that when i use aux sometime is lost sound in second like 123 5 i check my cable its still working normal for the bose one so not the problem at cable im reset jpl already pls help me (JBL charge 3 ) thankyou
@UtechUreview
2 жыл бұрын
Apologies for the late response. You might need a JBL app firm ware update and software update. Is this the original cable that came with you speaker or it’s a retrofit?
@michimichi4500
2 жыл бұрын
My dads JBL Charge 3 turns off by itself as if it did not have charge Even though it is fully charged after a while of use and Even being plugged into the charger and using it it turns off , do You think the battery has to be changed or is there another solution to not spend money please I need help and thank you
@UtechUreview
2 жыл бұрын
If the white leds highlights it’s charging up to 5 bars and it’s still tripping off.. and you don’t have any device plugged into your JBL charge 3 for power bank use. You might need to do a factory reset and update the firmware on the app..
@michimichi4500
2 жыл бұрын
@@UtechUreview thank you so much I Will try it! God bless You!
@UtechUreview
2 жыл бұрын
@@michimichi4500 if the reset and firm update doesn’t work, Hold down the power button for at least 30secs, the sound should beep and the five white LED lights should light up or show and power button blue when connected. So turn the speaker off and plug USB to charge the speaker. Are you using the original jbl charger? Let me know how you get on
@liettebernardino4868
3 жыл бұрын
It didn’t work for me😫 idk if I did it wrong but I hold the two buttons for about 10sec and and still didn’t turn off . What should I do now !?
@DIYCreativeStudioDSP
2 жыл бұрын
The problem with me is the loud sound, when I turn it on the sound is immediately amplified. Can resetting the speakers solve the problem?
@UtechUreview
2 жыл бұрын
Well it’s quite difficult remotely to ascertain the nth degree of loudness or decibel range but I would suggest a JBL firm ware update and computer software update first as it might be compatibility issues or a software glitch, if this doesn’t resolve the problem then try a reset if you are confident that the loudness is an anomaly from the norm or if it deviates from what it originally sounds like. Let me know how you get on
@DIYCreativeStudioDSP
2 жыл бұрын
Tnx 👍
@christiannilsson8609
Жыл бұрын
I have a charge 4 that is almost new, maybe used 2h, now it keeps turning it self on when i turn it off, its so annoying, i have tried like everything but i cant fix this! Reading that many has this problem. Are you the messias that will guide us through this shit? Jbl support is the worst, cant help with anything...
@UtechUreview
Жыл бұрын
Hi Christiannilsson8609, Have you tried resetting the speaker by holding the power button for a longer period of time or checking if there are app firm ware updates available for your speaker? It could be a software glitch, a faulty power button or an issue with the internal circuitry. What Model is your speaker and can you shed more light on the issue experienced? How often does this occur, how have you tried to resolve this thus far and were there any local effects or human error that contributed to the failure mode instu?
@fadiaboukhatro
2 жыл бұрын
I can't thank you enough I had that wierd static sound . After I did this reset seems to be everything worked back like normal save me alot of time open the whole speakers . 🔊
@UtechUreview
2 жыл бұрын
Glad your sorted and Thanks for the feedback Fadi and also hope you had a great weekend. Don’t forget to subscribe and share. Helps channel grow. Have a great week ahead.
@bigdaddygee
2 жыл бұрын
hello, please my charge 5 wouldn't come on unless its plugged, and then no button works too. but all the buttons are working just fine. please is there any way i can resolve this? thank you
@UtechUreview
2 жыл бұрын
There are a myriad of probable reasons for the reported problem. it may be charger or cable, software bugs, circuit board, or battery related. Probable solutions to your JBL charging problem 1. Replace the USB charging cable The USB charging cable may be faulty if it isn’t charging, as may have been yanked, bent or strained, as a result becoming defective . E.g Use a USB Type-C cable to charge your JBL Flip 5. So your Micro-USB charging cable might be faulty. E.g if your cable wobbles around in your speaker’s USB port. So check to see if this resolves the issue? 1b. Other broken charger related fault If you have a Broken charger, the battery of your speaker might not be charging. Your charger USB port may be broken or your internal board has gone bad. 2 Clean the Charging port. Remove any dirt. Use a toothpick if need be and blow out FOD OR debris 3 Factory Reset JBL Charge 5 or configuration setting Turn on the power of your speaker. Press and hold the ‘Play’ and ‘Volume Up’ buttons at the same time. Hold them for 5 seconds or more, then turn off your device. Wait a few moments and press the power button again to turn on the device. If it is in pairing mode, then you reset it! Connect your speaker to charge and check its performance. 4 Replace the Faulty Battery defective battery, probably means your speaker it will not work right. As it may have come to the end of its useful life or too old. Refrain from charging battery too much or been left under ultraviolet sun light. 5 Try a different Wall Power Outlet as outlet may be faulty Use a voltmeter to test voltage in the wall If it is too high or too low, you could to contact a certified electrician to prevent further damage or surge in the wiring and circuit board of your speaker. 6 update your software or firm ware if you are Using an Outdated JBL software as you may have bugs in the code. Resetting them usually requires holding down Bluetooth and volume buttons for 5 seconds - this will work on Go or Flip 5 models (but not Charge 3). To reset the charge quickly press the play/pause button along with power together until the light turns green. 7. Repair JBL 5 Faulty Circuit Board The circuit board can get damaged due to overcharging or overheating or Consistent contact with water can also damage the circuit board or cause a short circuit or fry certain point on the circuit board. In this case, you should take your JBL Flip 5 to a service center and they will fix it for you by testing for points, using a flying probe test and repairing faulty circuitry. Let me know if this helps. Don’t forget to subscribe and share helps Channel grow. Have a great weekend Somto.
@rainbowrailroadcrossing7798
2 жыл бұрын
I want to update the firmware from 3.9 to 7.6 is there a way to do it? The new app won’t let me
@UtechUreview
2 жыл бұрын
Presumably might need a bug fix from JBL which they could be working on to allow updates but firstly, Please check your wifi / mobile data connection and verify that it is working properly. It may be down and stopping you from updating the JBL Firmware Update app. Secondly, Confirm that you have enough storage space in your phone to download updates. If you don't have enough storage space, it can be blocking the app updates. Verify that the app you're trying to install supports your iOS version. The JBL Firmware Update app server may be down and that is causing the loading issue. Please try after few minutes. Lastly, Most of the times, it might be a temporary loading issue. You just need to press the recent applications menu (usually the first left button) in your phone. Then you close the app that has this issue. Now open the app again. It may work normally. Try to restart your iPhone / iPad. Press the power off button for few seconds and then choose restart from the menu to restart your device now. you can try opening the app, it may work fine. If none of the above working, you can wait till your phone battery drains and it turns off automatically. After that put it to charge, and press the power button. It may work after this. Finally, if you can't fix it with anything, you may need to uninstall the app and re-install it. iOS usually provides an option to restore settings and content from iCloud backup, if you've enabled it previously. Let me know how it goes.Good luck
@eddiekytia
3 жыл бұрын
If I did a firmware update to get connect plus would the factory reset remove connect plus so I can pair older speakers again
@UtechUreview
3 жыл бұрын
Hi Eddie, I dont think it should as it just resets the device to a clean slate of the current or recent JBL version. so I presume the firm/ OS update or upgrade should or would not be removed. It will just remove user data. If it deletes the firm update that would be very odd. Let me know how it went. If still in doubt consult your manufacturer but I doubt that it would remove the firmware. Dont forget to share and subscribe if you can. Thanks
@MuhammadAli-tp1tz
2 жыл бұрын
If i keep charger connected jbl runs fine,if i remove the cable after 3 minutes its shutdown and need to turn on the device again. What can be cause of this?
@UtechUreview
2 жыл бұрын
Firstly, are the 5 Charging LEDS lit up or you have only one white LED flashing? Or do you have the LED showing red? Are you using the original charger and is your charger broken? You might also need to Update the firm ware on your JBL app as well as a factory reset and see if that helps. Look forward to hearing from you
@kukuhkresmana5893
3 жыл бұрын
Hi I found a problem in the low frequency mode feature. That is, even though I can turn it off using the - button and the Bluetooth button, it keeps reappearing when I turn off the device. What should have been when the device was ON at the beginning it had to be LFM OFF instead of LFM ON and I'm afraid if it happens continuously it will damage the bass radiator. Is there any solution to fix this?
@kukuhkresmana5893
3 жыл бұрын
My device Jbl Flip 5, please help me
@radlEve
11 ай бұрын
I have the same problem on charge 3. Help please
@TheSezdial
3 жыл бұрын
works like brandnew. no more bluetooth connection issues. thanks
@ravenark8751
3 жыл бұрын
love Jbls. so portable. sound quality. thanks
@dannybenitez6683
3 жыл бұрын
My jbl charge 4 just turns off after going over the half way mark on the volume, do u know if anything I can try ?
@UtechUreview
3 жыл бұрын
Have you tried a reset? Is your aux cord connected when using Bluetooth? Tried Bluetooth or aux only? Are you encountering this problem when connected with a device? If yes turn your input sounds to 90/95 and sound on speakers lower.. might be dropping out trying to sleep or snooze if it can’t detect any sound but turns on when it detects sound.. by resetting it may have the desired input to stay awake.. my few cents.. let me know if it helps and if there are any more issues affiliated with your failure mode.. thanks for the feedback
@AnaCruz-oe1jx
2 жыл бұрын
I tried to reset it, since it had the same problem, it didn't charge and it was not working. After doing the rest the the turn in bottom light on and now I can't turn it off. None of the buttons work. It seems like if it were frozen.
@UtechUreview
2 жыл бұрын
Have you tried updating the firm ware on the JBL app and is your power cable the original that came with the device or is it broken? Have you tried changing or swooping the charging cable? Is your charging light showing red or white?
@LimeBoy-oo6ph
Жыл бұрын
My JBL Bluetooth light is always blue as if something is always connected. Even after I factory reset it and forget device on my phone. Then I turn it on and reconnect, and channel audio through the speaker on my phone, there's no sound coming out anymore. Thank you for the video. I'll keep trying to work something out.
@h.n6457
2 жыл бұрын
Hi in my JBL charge 3,the charging buttons have been constantly on but none of other buttons work. How can I fix this?
@AnaCruz-oe1jx
2 жыл бұрын
Did you solve the problem? The same happed ti me . I tried trying to reset the device pressing the bottons I found in different videos, then the turn on button stayed on and nothing else works.
@UtechUreview
2 жыл бұрын
I don’t think any of the buttons have wear and tear. Have you updated the firm ware on your JBL app? When you say constantly on..do you mean the white led lights keep flashing or the white LED’s , all 5 or most of them charging LEDs are ON but not flashing?
@h.n6457
2 жыл бұрын
@@AnaCruz-oe1jx try using the power button with the + . And then power it up and see. worked for me
@daniworldwide8946
Жыл бұрын
Resetting worked with my issues, thank you mate !
@UtechUreview
Жыл бұрын
Thanks DaniWorldwide. Glad your sorted and could be of help. Dont forget to subscribe and share. Helps channel grow. Have a great weekened
@daniworldwide8946
Жыл бұрын
@@UtechUreview subscribed right there for you, have a great weekend too!
@UtechUreview
Жыл бұрын
@@daniworldwide8946 Thanks DaniWorldwide. You welcome
@carolbatista8062
3 жыл бұрын
when I press the play and + button it doesn’t turn off
@UtechUreview
3 жыл бұрын
Hi Carol, Is this still the case? and are you trying this on a 3 or 4? Did you hold both buttons down for a protracted period of time until your JBL turned off or did you press the buttons down in a fraction of a Sec?
@marsmalphas5742
3 жыл бұрын
I have the same problem. I’ve tried many times and even if I hold down the + and play/pause button together for up to 30 seconds, it won’t turn off. The hourglass button is also flashing for some reason I can’t figure out. We don’t have any more JBL speakers in the house so I don’t think it’s paired with any other speakers or anything
@marsmalphas5742
3 жыл бұрын
It’s on a 3
@UtechUreview
3 жыл бұрын
@@marsmalphas5742 is your firmware up to date?
@marsmalphas5742
3 жыл бұрын
@@UtechUreview On the speakers? ah probably not, its my dads. I'll see if I can update it somehow
@tomiv8014
3 жыл бұрын
Hello can you help me my charge 4 isnt showing on bluetooth the button has stoped working. I can connect with my old phone but when i turn my speaker on it doesnt even show on bluetooth
@UtechUreview
3 жыл бұрын
Have you tried resetting and still the same problem? Do you have a new phone that doesn’t connect as opposed to the old phone connecting? I presume that your JBL isn’t having any charging issues?
@halfpiint
2 жыл бұрын
After installing Monterey on my MacBook Pro and my JBL Charge 3 still connects to my MacBook Pro but doesn't play. It still plays with my iPhone and iPad but not MacBook Pro. Any advice?
@UtechUreview
2 жыл бұрын
Upgrading an OS in MAC may sometimes Lead to compatibility issues but sometimes can be resolved and some devices or applications play catch-up, Try restarting your computer then reconnect your JBL speaker 3, if the glitch is still persistent check to see that you have only 3 devices connected to your charge 3 at only one time, check your MAC book pro for any updates and update according by checking software update in your settings, if this doesn’t resolve the problem, download cleanmymacx and run maintenance scripts, also check to see that the firm ware on your JBL charge 3 app is updated, you can run a factory reset on your JBL charge 3 and if this not work hold down the option and shift key on your MacBook Pro and click on the blue tooth icon in the task bar at top right and select and reset the blue tooth module on your computer, if these do not work we may need to troubleshoot your SMC and .p file on computer, let me know if these work and if not would help resolve further. Don’t forget to subscribe and share if you can. Helps channel grow. Happy hump day of the week
@halfpiint
2 жыл бұрын
@@UtechUreview I thank you for this video and your quick response. I downloaded the JBL app to my iphone and connected my Charge 3 to my iphone. Then disconnected the Charge 3 from my iphone and tried to pair it with my MacBook Pro with the newly upgraded Monterey and. That seemed to do the trick. All of a sudden JBL Charge 3 appeared in my bluetooth devices list. However, I did copy your instructions to reset my boothtooth for the future. Again thank you and YES, I subscribed and am sharing your youtube channel.
@UtechUreview
2 жыл бұрын
@@halfpiint thanks halfprint, glad your sorted. Have a good one
@diannacastellanos3559
2 жыл бұрын
I tried it on my charge 4 and now I can’t get it to turn on.. I plug it to the charger and it shows that it is charging but once I unplug it it turns off.. not letting me connect to Bluetooth at all or recognizing that it was even on. Idk how to undo the hard reset . HELP!
@UtechUreview
2 жыл бұрын
Ok what was the initial issue that made you want to try a factory reset and what type of device are you trying to connect your charge 4 to?
@chrishernandez3248
3 жыл бұрын
How do I get the connect plus firmware update on my charge 3??
@UtechUreview
3 жыл бұрын
Download the JBL app on your phone or computer, connect and update firmware
@juancarlosamarillas8240
2 жыл бұрын
I’m having difficulty synching both of my charge 3 speakers. It’s either one or the other. I’m going to try to reset and hopefully that works.
@juancarlosamarillas8240
2 жыл бұрын
Never mind did factory reset and only linked to one speaker then synched them. 👍🔥
@prowlerpunk
3 жыл бұрын
Thank you for the content.. Very useful
@mob_psycho_134
10 ай бұрын
i'm using jbl extreme 3 after factory reset, it is automatically in pairing mode (bluetooth led keeps flashing) but i cannot make any device connect to it pls help me
@rabinstonkulanthaisamy9996
2 жыл бұрын
My jbl charge 4 is blinking one bar light only when it's on charging. Please what should i do to solve charging issue.
@UtechUreview
2 жыл бұрын
Are you using the right JBL cable and plug? Are you charging and using Bluetooth at the same time? Is your firm ware on the JBL app up to date?
@boulobarr2414
3 жыл бұрын
100% factory resets. defo works. big thanks
@UtechUreview
3 жыл бұрын
Thanks for the feedback Boulo. Glad it got sorted. Please subscribe, like and share if you can. Appreciated
@sxrxnrr
Жыл бұрын
So my charge 3 won't turn on unless I have the power cord plugged in and the aux cord on it works but as soon as I unplug it it turns off but still shows it has full battery and none of the combinations of buttons do anything
@justdoit1343
3 жыл бұрын
Hi sound not coming from JBL charge 3, what to do
@hackstertheskater
Жыл бұрын
Hey, My girlfriend made her galaxy 21 forget her JBL charge 3. She isn't able to find it and re-pair with it again, but my OnePlus 7pro has no problem with pairing and connecting. Anybody got any recommendations? The proble is still there even after a factory reset.
@UtechUreview
Жыл бұрын
Have you tried restarting and refreshing Bluetooth on the galaxy and charge 3 buy turning ON and OFF both devices and switching Bluetooth on and off?
@Nkemedia
Жыл бұрын
Legend mate!
@UtechUreview
Жыл бұрын
You welcome NKE Media. Glad you are sorted. Don’t forget to subscribe and share. Helps channel grow. Have a fabulous week.
@raphadialo4191
3 жыл бұрын
tried it and it works. brilliant. Thanks mate. subscribed. :)
@olliehilliam8171
3 жыл бұрын
Hi there, I've done the reset but my jbl keeps pausing the song and skipping the song and turning on siri. help i dont know what to do, its like as if someone is pushing all the buttons but its just sitting there doing it itself
@UtechUreview
3 жыл бұрын
Try restarting your phone. deactivating and activating siri if needed. Is your jbl battery flashing red or one bar white? Is it fully charged? Try also disconnecting and pairing your Bluetooth to your iPhone..let me know if problem Still persists?
@UtechUreview
3 жыл бұрын
Any luck?
@olliehilliam8171
3 жыл бұрын
@@UtechUreview Yes the problem still persists, Ive tried everything and this has been happening for a few months now and I dont know what to do
@UtechUreview
3 жыл бұрын
@@olliehilliam8171 Oka. Have you updated the firmware on your JBL and Operating system on your computer and mobile?
@UtechUreview
3 жыл бұрын
Also has your warranty expired?
@jedbarton4161
2 жыл бұрын
My jbl flip 4 won’t turn on for some odd reason, is there a fix?
@UtechUreview
2 жыл бұрын
There could be a myriad of reasons why this happens, device is not fully charged, your cable is broken hence not charging your device, the charging port is broken, the rubber under the power button is broken or worn out, your battery is faulty. You might need to change the battery or rubber under the power button but first before you do that can you let me know..is the light blinking underneath when your charge? When you press the power button what happens? Does it power on or partially? You make have run the battery really flat. If the blinkers underneath is red. Leave it charged in ac mains socket for over 24 hrs with the original charger provided is not broken and troubleshoot from there
@ACABSTUDIOS
3 жыл бұрын
My charge 3 would connect to old devices but would not pair with new ones. This fixed it
@UtechUreview
3 жыл бұрын
Thanks for the feedback dragonmaya, glad your sorted :). Don’t forget to subscribe and share if you fan. Helps the channel grow.
@JonBoii
2 жыл бұрын
I have the issue where I have no noise and when I put it on charge it just stays a solid one white light
@UtechUreview
2 жыл бұрын
Your battery probably ran down flat too many times before recharging . Have you tried a factory reset or are you unable to do so because its 1 bar , not charging or the LED light is on the last bar showing red? if you have done a factory reset or not, leave it on charge for a while for a 2days or more if need if until it starts charging incrementally one level up progressively.,and factory reset once you get power. Also is your JBL firmware up to date? If this doesn’t work let me know…
@JonBoii
2 жыл бұрын
@@UtechUreview I brought a new battery what is the exact same one what came with the speaker but it hasn’t done anything just does the same thing Thank you for a reply
@UtechUreview
2 жыл бұрын
@@JonBoii no worries if you charge for a protracted period and you update the firmware and reset and it doesn’t work or still persists, let me know
@JonBoii
2 жыл бұрын
@@UtechUreview I will thank you
@RianBabtista
7 ай бұрын
Hey man, my problem is the battery life gone so fast....can U help me
@UtechUreview
7 ай бұрын
Hi RianBabtista, I will upload a video on how best you can resolve this issue if the troubleshooting tips doesn’t resolve the fast draining issue. Don’t forget to subscribe so you did get a notification once video is published on or before weekend. Have a great week
@mattiaferniani8723
3 жыл бұрын
Is it normal that my charge 4 turns on in low frequences mode? I tried a factory reset but it keeps doing that
@UtechUreview
3 жыл бұрын
I presume what is happening is that the LFM mode is turning off DSP ( digital signal processing) , so go back to the DSP setting, hold it/ Bluetooth for 10 secs . So suffice to say, there is no LFM as such on JBL. Also you can press the Bluetooth button and volume plus button at the same time for 10 secs which will inturn turn the DSP on and if you want to deactivate DSP press Bluetooth button and minus button for 10secs where the power button and Bluetooth button lights up when pressed for 10 secs, this deactivates DSP. I Hope this was of some use. Dont forget to share and subscribe if you can. Helps channel grow. Cheers.
@luislopez-oi5jw
3 жыл бұрын
I jus got a new jbl charge 3 an I charge it for 4 hours an it just light the secand light to your right also when I connect to charge… it should light the 5 light but it doesn’t what would be the problem??
@UtechUreview
3 жыл бұрын
Hi Luis, I don’t think there is anything wrong with your JBL. The white lights charge incrementally one step at a time. Until it reaches the 5 bars at which point it would no longer be flashing. If your JBL is undercharged the first light shows red and would need more charging. Try charging until it reaches five bars. If it hasn’t reached 5 bars it’s not fully charged. Let me know if this helps and don’t forget to subscribe and share. Hope to hear from you soon
@toolstation9769
3 жыл бұрын
Brilliant was able to factory reset. defo works mate. top man.
@UtechUreview
3 жыл бұрын
Thanks for the feedback Station. Glad it was of some help. Please subscribe, like and share if you can.
@fnub
2 жыл бұрын
The three sounds it comes with, power up/down & Bluetooth connection. My question. How can I mute or delete these sounds. They're highly annoying.
@rockingskater15
2 жыл бұрын
connect the speaker to the jbl app, there you can turn off the sounds
@daniellepaulhamus5276
3 жыл бұрын
I can get my jbl 3 to charge it just keeps flashing the red. How can I fix this?
@UtechUreview
3 жыл бұрын
Your red flash or blinking presumably means your battery is very low and needs more charge. Hold down the power button for at least 30secs, the sound should beep and the five white LED lights should light up or show and power button blue when connected. So turn the speaker off and plug USB to charge the speaker. If you can't get the speaker fully charged it could be that your cable is faulty? Are you using the original jbl charger?
@dilciadinarte58
2 жыл бұрын
Thank you so much, my JBL Charge 3 didn’t want to connect to any of my devices.
@UtechUreview
2 жыл бұрын
You welcome Dilcia. Glad you are sorted. Don’t forget to subscribe and share. Helps channel grow. Have a great weekend
@karenmaygan8382
3 жыл бұрын
Hi, please help me! 🙏 my JBL charge 4 bluetooth icon has no light and can't connect to new devices. I can't reset it also since bluetooth is not working. Hope you notice me! Thanks!
@UtechUreview
3 жыл бұрын
Hi Karen, firstly have you tried restarting your devices e.g iPhone and computer before connecting? Secondly, just hold down the Bluetooth and plus button..when it powers down a circular path or ring around the power button and Bluetooth should light up but not the blue tooth itself so give it a try, thirdly is your jbl charging correctly or is the battery almost out. Usually when your led white light turns red you may experience glitches in your connectivity so charge to full capacity of 5 bars, fourthly is your paired device connected to the same Bluetooth connection? For example go to Bluetooth settings on your phone, you should see the paired devices. Just because it is listed doesnt mean it is connected. Actually click on connected and it should change from not connected to connected and you should hear a connection sound. Fifthly is your firmware up to date for your JBL, have you updated it or are there any updates needed ? Let me know if this helps. Dont forget to subscribe and share if you. Look forward to hearing from you
@karenmaygan8382
3 жыл бұрын
@@UtechUreview Hi, I appreciate your reply! 😊 however I've done the first, third, forth and the fifth and it's all good but the second one is failed even holding it for 10 seconds. When I turn on power and press bluetooth it's not blinking or scanning for a new device. My speaker only works with those devices that are paired already. I tried to connect it to my laptop and mums phone but it's not visible. I really hope you can help me! 🙏 Hope to hear from you again soon! Thank you so much! Karen
@UtechUreview
3 жыл бұрын
@@karenmaygan8382 Firstly explore every alternative before concluding your button is faulty. Try restarting your devices. Disconnecting blue tooth and connecting from your devices to your speaker even if the Bluetooth light isn’t flickering or searching for connectivity. Also if your connecting to hotspots or Wifi, flick the internet buttons off to the left for 5 to 10 secs and connect back to the internet or let your devices search for new devices. If I may ask when you press Bluetooth is it only a question of the lights not coming on or it does not make any pong sound at all? If you corroborate that the firmware on your JBL and the software on your external paring devices are all up to date and we try to delve to the rootcause of the issues or repeat concern experienced It may be linked to: The Bluetooth Chip on the motherboard been faulty or may not be working properly if the speaker does not want to pair with any devices, But if you say the buttons arent functioning, Operating /or perhaps Responding Properly , it could presumably be that the buttons are not responding when pressed as a result of the Buttons may be worn down, reached its natural life of wear and tear or blocked by debris. I.e If one or more of the buttons is not functioning the button may have been worn down from regular use or debris may have worked its way under the rubber membrane. Let me know if you are unable to trouble shoot and would probably see if I can send you a corrective action link but may require you upping your sleeves.
@karenmaygan8382
3 жыл бұрын
@@UtechUreview Hi, thank you for your reply! My speaker only pong and bluethooth button has a light when it's connected to a device (devices that are connected already before this problem) so I doubt to disconnect my phone to my speaker cause it might not be connected again. When I turn off my phones bluetooth the also disappear which means disconnected and I tried to connect it to a new device (new phone & laptop) bluetooth button is not blinking or searching for a new device. I posted a video asking for help on Tiktok but I guess no one sees to help me. 😔 I'm thinking bluetooth button is broken but there's a tick sound whenever I press it it's just that no light. 🙏
@UtechUreview
3 жыл бұрын
@@karenmaygan8382 Some older speakers are very simple; they just try to connect with the last thing they paired with. If your speaker was previously paired with another phone, laptop Some speakers can store pairing for multiple devices. However, there is a limit to the number of devices' pairing information that they can store. If you're having trouble pairing a speaker that have been paired to many devices in the past, you may need to reset your speakers to clear out all of the pairings so you can start fresh. If this isn’t the problem then this link might be of interest www.ifixit.com/Guide/JBL+Charge+4+Buttons+Replacement/119323
@reezydrips_drips6823
Жыл бұрын
Thxs man ya wanna hear a story I have a jbl extreme here and my mom and step dad said throw it out and I kept it just now I have it right here while I’m commenting so I kept it and I just looked up why won’t my job connect to my phone and here I am and now I have a new jbl speaker thxs agin man😂
@UtechUreview
Жыл бұрын
You welcome ReezyDrips. Glad you hung in there and got there in the end. Made up for you. Don’t forget to subscribe and share. Happy hump day of the week and hope this new month brings you plenty of luck and enjoy the rest of your week. Stay blessed
@2slofouru
2 жыл бұрын
I realize it's an older video, but was wondering if anyone else has the issue with the jbl audio cutting off and on erratically when paired with an android. I have a S21 and lately the jbl audio will randomly cut off and on while playing. It never stays off, just randomly. The battery sbows full, makes me wonder about some kind of interference from something at work.
@jenniferduff5518
3 жыл бұрын
My JBL 3 will play one song and stop. It showing the next song to be played, but it acts as though its searching for connection. Then, it will remain on ,but just wont play
@UtechUreview
3 жыл бұрын
Hi Jennifer, are you playing with your mobile phone or PC and if yes have you tried restarting these devices.Are you playing via Bluetooth?. Secondly, is your battery charged or is the LED light on your charge 3 showing red or almost out?. Have you also tried turning on and off your charge 3 and resetting the device as in the video? Does the problem Still persist after all these? Looking forward to hearing from you.
@danib4283
Жыл бұрын
Hi i have a Sven-PS 210 and i dont know how to reset I tried a lot and it still doesn't work if someone can help me 🙂
3 жыл бұрын
En mi JBL 3 Charge hago el reset presionando botón + y pausa ll y no se apaga solo se quedan el botón on prendido y el de JBL l>
@UtechUreview
3 жыл бұрын
Hello El Tigre, my apologies my Spanish is not so great. Any chance you can convert or translate using Google translate to English..I am unable to copy your comment to translate. Look forward to hearing from you and hopefully can be of some help. Thank you
@joeterrance9037
Жыл бұрын
Hi I'm having trouble with my Bluetooth speaker it is full charged but won't turn on
@reyansha3263
2 жыл бұрын
Thank you so mcuh!!
@UtechUreview
2 жыл бұрын
You welcome Reyansh. Appreciate the feedback. Don’t forget to subscribe and share, helps channel grow. Have a great weekend
@reyansha3263
2 жыл бұрын
@@UtechUreview Sure!!
@reyansha3263
2 жыл бұрын
I subbed
@malanawarren4456
Жыл бұрын
Thank you so much. Your a lifesaver
@UtechUreview
Жыл бұрын
You welcome Malana, appreciate the feedback and glad your sorted. Don’t forget to subscribe and share. Helps channel grow. Have a great week and weekend. Take care
@marydurand1
3 жыл бұрын
THANK YOU!!!!!!! This did the trick!!! : )
@UtechUreview
3 жыл бұрын
You welcome Marydurand1. Glad you sorted. Subscribe and share if you can. Helps channel grow. Have a great wknd.
@davidonion4150
2 жыл бұрын
Worked for me. Thanks!
@UtechUreview
2 жыл бұрын
Nice to hear Coffee News. Glad you it worked for you. Don’t forget to subscribe and share as it helps Channel outreach grow. happy holidays.
@rainierzerrudo7042
2 жыл бұрын
thanks so much! it worked for me :)
@UtechUreview
2 жыл бұрын
Thanks Rainier. Appreciate the feedback and glad your sorted. Don’t forget to subscribe and share. Helps channel grow. Have a great weekend. Thankyou
@pabloseveri5057
3 жыл бұрын
can my jbl charge 3 go from connect plus to jbl connect
@UtechUreview
3 жыл бұрын
Understand that not all speakers have connect + or connect and speakers with connect Cannot sync or communicate with connect + speakers. You should connect only one of them to your Bluetooth device (e.g iPhone) otherwise Bluetooth will experience a glitch or implode leading to dropouts and abnormal sound behaviour JBL Connect The following speakers have the JBL Connect function and can be connected to each other: JBL Flip 3 JBL Charge 3 JBL Pulse 2 JBL Clip 2 JBL Connect+ The following speakers have the JBL Connect+ function and can be connected to each other: JBL Flip 4 JBL Xtreme 2 JBL Pulse 3 JBL Charge 4 JBL Boombox I hope this helps. Dont forget to subscribe and share if you can. Appreciated.
@Fabiohobby
3 жыл бұрын
How to go back to the old version 2.7 charge 4?
@UtechUreview
3 жыл бұрын
Thank you for the feedback. Are you referring to a firmware downgrade as opposed to an update? Have you visited the JBL website or contacted customer care?
@rohanhrangkhawl2614
3 жыл бұрын
Thanks for your preferences
@stevensalazar340
Жыл бұрын
Someone help me I reset it and I'm charging it and it's a red dot blinking what do I do?
@UtechUreview
Жыл бұрын
Is this a JBL 3? You would usually have a red light lit up when your battery is flat out and white lights blinking. Are you saying you have white lights flashing in place of red as it charges each level up?
@bellerzl_
Жыл бұрын
My - and + button function as 'play' button also. It means i hv 3 play buttons now but got no volume button 🥺🥺🥺 idk whyy. Can someone help me?
@UtechUreview
Жыл бұрын
Have you tried a reset ? And did you leave it submerged in water for long periods?
@Djidroneswe
3 ай бұрын
I have factory reset my charge 5 but it still doesnt connect to my phone but it connetcs to other devices but not my phone
@lifewithanni3014
3 жыл бұрын
Plz make a video on jbl j009+
@UtechUreview
3 жыл бұрын
Thanks Annie. Dont forget to share and subscribe. Thanks for the recommendation. Noted
@chetankumar2389
3 жыл бұрын
can this be connected to a laptop
@UtechUreview
3 жыл бұрын
Hi Chetan? Yes it can be connected with an aux cable wired or wireless with Bluetooth..check and click the link in the description for connection. Dont forget to subscribe and share if you can. Thanks
@ErickOdillepa
6 ай бұрын
thx u, its work for me :3
@UtechUreview
5 ай бұрын
You welcome ErickOdillepa and glad you are sorted. Appreciate the feedback. Don’t forget to subscribe, like and share. Helps channel grow. Have a great weekend
@crystaleeferguson1515
3 жыл бұрын
Thank you this worked for me
@UtechUreview
3 жыл бұрын
Glad you sorted. Don’t forget to subscribe and share. Helps channel grow
@sofiasotopineda7086
2 жыл бұрын
Thanks bro you a real one 💯 🙏🏼
@UtechUreview
2 жыл бұрын
Glad your sorted Sofia Soto and thanks for the feedback. Hope you had a great weekend. Don’t forget to subscribe and share. Helps channel grow. Have a great week ahead.
@mattdefreitas525
Жыл бұрын
Legend, thank you
@UtechUreview
Жыл бұрын
Thanks for the feedback Mattdefreitas525. Glad I was able to be of some help. Don’t forget to subscribe and share. Helps channel grow
@kbhn82
Жыл бұрын
Tkx bro, save my day ;)
@UtechUreview
Жыл бұрын
You welcome Torben. Appreciate the feedback. Don’t forget to subscribe and share. Helps channel grow. Happy holidays
@Aabir_TTF_Lk
3 жыл бұрын
1:22 but my speaker is not turn off Reason...?
@UtechUreview
3 жыл бұрын
Are you referring to a 3 or 4? And what or how did you press the buttons when resetting?? Perhaps the rubber underneath the button is worn out or come to the end of its useful life.
@Aabir_TTF_Lk
3 жыл бұрын
@@UtechUreview I'm sry bro....🙏💔 It work correctly💖😍😍 TNX Dude🙏💪🙌
@UtechUreview
3 жыл бұрын
@@Aabir_TTF_Lk glad you sorted. Apprecuate the feedback Aabir. Dont forget to subscribe and share if you can. Helps channel grow. Have a great summer.
@Aabir_TTF_Lk
3 жыл бұрын
@@UtechUreview ok
@UtechUreview
3 жыл бұрын
@@Aabir_TTF_Lk hopefully. Thanks
@sarahamaniampong1405
3 жыл бұрын
In my case, the LED lights are full but the battery doesn’t even more than 5 minutes. I guess it may be the battery
@UtechUreview
3 жыл бұрын
If its up to 5bars(LED) and going out in less than 5mins..could be a glitch...have you tried a factory reset?
@__theylovet
2 жыл бұрын
This helped thank you
@UtechUreview
2 жыл бұрын
Thanks for the feedback Theylovet. Glad your sorted. Don’t forget to subscribe and share. Have a blessed week
@jala5577
Жыл бұрын
MY JBL Charge 3 was working with my Nokia G21, but stopped working after the android 13 update was done to the phone, it connects with phone but it got no sound, can see the graphics for Spotify moving but got no sound, it works ok with my laptop, the speaker also affects the the WiFi internet settings stops... Can you help me with this problem?
@elizabethlumu8027
2 ай бұрын
The best video
@UtechUreview
2 ай бұрын
Thank you. Appreciate the feedback
@elizabethlumu8027
2 ай бұрын
Thank you very much
@UtechUreview
2 ай бұрын
Appreciate the feedback and glad was of help. Dont forget to subscribe, like and share. Helps channel grow
@francisfuentes2529
3 жыл бұрын
hi can you help me how to reset tronsmart t6 mini speacker. can you help?
@UtechUreview
3 жыл бұрын
Try pressing & holding the play pause button for over 5 to 6 seconds. When you hear the ping or short beep sound your T6 light should start blinking in blue color just as in the case of the JBL you can release the play pause button. Let me know if this tronsmart speaker reset worked and if your able to pair again with device or smartphone via Bluetooth? Hope to hear from you soon?
@francisfuentes2529
3 жыл бұрын
its work but after 5 minutes it automatically disconnected and started to beep and blink the blue light again.
@francisfuentes2529
3 жыл бұрын
sir thank you for the advise i hope my problem eill be solve soon eith your help
@UtechUreview
3 жыл бұрын
@@francisfuentes2529 thanks for the feedback Francis. Sorry to hear your issue was partly resolved and problem still persists. How old is your T6 have you got the software on your computer updated and have you restarted your device? Is your device fully charged? Hopefully soon should make a video on troubleshooting the T6 beep issue. As always don’t forget to Subscribe and share if you can so it can help reach those who need help with JBL’s and so you can get an update when the T6 is uploaded. I would feedback you to once I understand the underlying nature of the blinking your experiencing
@francisfuentes2529
3 жыл бұрын
5 months old and idont have pc here in my house. maybe it need to update the software? 😔. thank you for helping me. im one of your subscriber now. ty
@diegoalban617
3 жыл бұрын
Como se restablece el firmware? Desde q actualice ya se descarga muy rapido :/ 1 hora máximo dura.
@UtechUreview
3 жыл бұрын
down the jbl app. check to see if there are any updates. Update your firmware buy downloading the app on your phone. Your iPhone or computer should be paired with your JBL speaker. Click on update and ensure that while updating you donot turn off your JBL speaker as your speaker might turn off and on during the process update. Let me know if this helps? hacia abajo la aplicación jbl. compruebe si hay actualizaciones. Actualice su compra de firmware descargando la aplicación en su teléfono. Su iPhone o computadora debe estar emparejado con su altavoz JBL. Haga clic en actualizar y asegúrese de que durante la actualización no apague su altavoz JBL, ya que su altavoz podría apagarse y encenderse durante el proceso de actualización. ¿Déjeme saber si esto ayuda?
@tomytommy1212
2 жыл бұрын
Hola cómo puedo volver a la versión anterior actualmente tengo la 3.0 quiero volver a la 2.7. Desde que actualize perdió bajos no suena fuerte y se descarga rápido
@MyResponseWouldBe
2 жыл бұрын
I have a red light blinking how do I reset it
@UtechUreview
2 жыл бұрын
Red light blinking probably means your battery is almost out. You should charge it to at least one white bar or two before attempting a reset. Charge for longer hours and update your JBL firmware in the app.. if this doesn’t resolve the Problem.. let me know.. thanks
@MyResponseWouldBe
2 жыл бұрын
@@UtechUreview battery is full
@UtechUreview
2 жыл бұрын
@@MyResponseWouldBe you welcome CrYPt1C. Appreciate the feedback. Don’t forget to subscribe and share. Helps channel grow. Happy hump day of the week
@waqareagle7625
Жыл бұрын
Thank you dear 🎉❤
@UtechUreview
Жыл бұрын
Thanks for the feedback Waqar. Appreciated. Glad your sorted. Don’t forget to subscribe and share. Helps channel grow. Have a wonderful week. Bless
@sharonhendrixson9981
Жыл бұрын
I bought a new speaker, charged it but it want power up.
@UtechUreview
Жыл бұрын
Hi Sharon, sorry to hear that. What model is it? Are you using the original cable and do the led’s light up when charging? Are there signs of the cable being broken and how many hours have you charged it for?
@sharonhendrixson9981
Жыл бұрын
Charge essential, don't see a a model number on the box. I've already packed it back up to take back to store. I charged it until all the lights were lite up and not flashing.
@UtechUreview
Жыл бұрын
@@sharonhendrixson9981 ok. Thanks for the feedback. I meant if it was a charge 3 or 4. Wish I could be of more help and hope they get it sorted for you. If you have anymore questions do not hesitate to let me know. Have a great week. Thank you
@simplehearts6431
Жыл бұрын
Need help. My jbl4 isnt charging
@UtechUreview
Жыл бұрын
Hi Simple Hearts, Are you using the original cable? Is your cable broken? Did you run the battery flat while in use for example White light flashing the red light and then battery charging lights totally out?
Пікірлер: 323