I have never done anything with fiberglass before. There are plenty of instructional videos about it, but none are as descriptive, down to Earth and to the point as yours. I'm in the middle of a 2009 Tacoma Access Cab stereo upgrade with some tough placement choices, and solely because of your videos, I actually believe I know enough to try some custom panels. These videos will be loaded up on my computer the whole time for my first few tries. Awesome videos and thanks for posting...
@outlawdcp1313
8 жыл бұрын
Thank you for this video. Im trying to learn how to "fiberglass" custom auto parts. Your vid's (out of the 1,000 i've watched) is by far THE BEST! Very easy & simple to understand, not all of the background noise, B.S., confusing extra steps, etc. Very str8 4ward. NO MISSED STEPS EITHER! Cant wait to check-out your other video's!
@itsplayday
8 жыл бұрын
This was the best video I've seen on fiberglass! You were direct, detailed, showed just enough video of each step, and made it look easy. Awesome vid.
@amb3cog
7 жыл бұрын
Thank you. Learned a lot. I need to do this to my door. As I have no room in my kick panel area. Just bought a router tonight that fits on the circle jig. So glad I found this video. Made me glad I bought it.
@peterjoseph3928
8 жыл бұрын
that foil trick to get the matt to stay down was GREAT! thank you!!
@WaltAndWaves
9 жыл бұрын
The most clear and concise video I've seen on howl do this,none of that unnecessary talking,just straight directions!!!!props!!lol
@kwonpae-corr4300
4 жыл бұрын
i love how your videos are straight to the point with no extra bs
@superchile9640
3 жыл бұрын
Great video. Love that you made another kick panel and then made the speaker pod. Very informative.
@mikexhotmail
9 жыл бұрын
Best tutorial about this subject. (I have watched 20-30 already)
@articat568
3 жыл бұрын
Nope sprayway customs will teach you ways to do it that will actually last. This will crack and break before you knownit
@nathanielrenner9540
8 жыл бұрын
Dude great video! I love open, honest, and detailed how to's and this covers all three. Great stuff man! Keep up the good work!
@520dblock3
Жыл бұрын
Freaking excellent! I'm not paying anybody to do what I can try and do myself first. I truly appreciate this example!
@439tasha
10 жыл бұрын
simplest instructions I have seen from any other video. I am ready to try it myself. Nice work!!
@jamesmarsh7823
9 жыл бұрын
Very good instructional video,most of these are just pictures with crappy music, I will be having a go using this method soon.
@Alexlivingloud
11 жыл бұрын
holy Shit batman!. Iv seen your other fiberglass video on how to build a fiberglass box and I was amazed with how you teach the concept of building it. Today I fixed the holes on where I had mounted my tweeters, with fiberglass and realize it is not as hard as I thought it was. Now thanks to this video you have given me the confidence I needed to start my custom kick panel speaker pods.
@HvensFury
7 жыл бұрын
youve got some serious patience man! great job!
@teddybar66
10 жыл бұрын
quick, simple and informative... great job....
@nathanjenkins8284
5 жыл бұрын
My man that was one of the most informative videos I have seen yet excellent job to the point straight up I know how to build kick panels now great job thank you for your help I will be subscribing
@FarmerFpv
4 жыл бұрын
This is the crude way of doing it, would never fly in a high-end shop, look up how to make a fibreglass plug and fibreglass casting with a tooling gel coat. You could do it his way but in person, it looks horrible. It's also much messier his way to much sanding and cutting, the end result doing it his way it will look like dented metal rather than a smooth part that flows with the car. Either way good luck mate.
@myboy051
4 жыл бұрын
Farmer Fpv - yes you are correct “HIS JOB “ will look horrible in person . He didn’t take the time to use a skim coat of lightweight bondo filler or cut and sand the edges nice and neat . Lots of people use this method while using more effort and finesse to have a flawless outcome . When I seen him starting to prime that bumpy surface I couldn’t believe what I was seeing .🤯😳
@kslovi
11 жыл бұрын
That is one of the best videos I've seen! Kudos, detailed and explained very well!
@latin8700
9 жыл бұрын
NIcely done, I will use the tutorial to do my kick panel for my 2003 Isuzu Ascender. Excellent job! I will do an extra step and add tweeters as well. Once again your tutorial will me help me do mines. Thank you...
@akbart.h8901
5 жыл бұрын
That was one of the most informative and interesting projects I've 👍👌
@DanielAspire
10 жыл бұрын
That was an awesome video! Keep up the good work! Your video was so good it makes me want to try it with out fear of failure.
@lfgojr
10 жыл бұрын
Hurtugood86, your tutorial is just as much, congratulations, if half of the video tutorials on the net had half the quality of her everything would be much easier to make, very good, the best.
@andyandnancy
4 жыл бұрын
The foil trick was brilliant!!! Thanks for sharing!
@1-Six-dee
7 жыл бұрын
Great process man probably the best I have seen yet I feel confident I can do this awesome video u have a new sub
@fruttix
5 жыл бұрын
Really interesting, simple and efficient! Thanks!
@tomchristopher71
9 жыл бұрын
Great video. Adding it to my favorites for when I build some panels in the future.
@jus1taj
5 жыл бұрын
Awesome. I’ve always wondered how that was done. Thanks!
@modfydgarage2312
8 жыл бұрын
that flush bit technique was a good idea. I'll have to try that next time I fiberglass a speaker enclosure.
@stevecolombn
4 жыл бұрын
Modfyd GARAGE how do you mix fiberglass resin with hardener
@joshuadeacon2283
4 жыл бұрын
Dude it literally comes with instructions when you buy it
@DJCallitquits
4 жыл бұрын
Foil for the curves..🤯 never knew! Awesome video!
@ElusiveCube
9 жыл бұрын
thank you, wow it was really nice, clever , makes me think of endless possibilities
@a1930ford
10 жыл бұрын
Very nicely explained and a well done video clip. Nice job.
@FriendlyManitoban
3 жыл бұрын
Great video! Super helpful info. - Your work looks excellent.
@ericlj1979
7 жыл бұрын
awesome!...great work man...I need to learn to do this ASAP👍👍
@dipin22
11 жыл бұрын
Sweet video bro can't wait for more videos of other projects...!!!
@outdoorsumo5358
4 жыл бұрын
You are kept very helpful to share about subwoofers, it is also demantable post for those who want to upgrade their old subwoofer.
@THEATREGOD3
5 жыл бұрын
perfect bro right business excellent knowledge of materials project and execution
@calebl6609
8 жыл бұрын
You did a really good job sir.
@undeadkid1
5 жыл бұрын
this was made in 2012, This is such a clear video, Nice.
@Morphz_Unlimited
5 жыл бұрын
Very informative. Well done 👍🏾
@sdcaraudio1638
10 жыл бұрын
one of the better videos,nice job!
@martinez1701a
6 жыл бұрын
This is awesome I have a 95 Yukon 4door I think I'm gonna use this method to install 8" subwoofers in the rear doors instead of using a speaker box.
@Feelgoodie
11 жыл бұрын
Great vid man! Good job w/ those panels!
@johnanderson3568
10 жыл бұрын
Great video, thanks for posting
@tonygunz21
10 жыл бұрын
Very informative. Thanks for the vid
@soorena1
10 жыл бұрын
Great job, looks great
@saulzeigen1348
8 жыл бұрын
Great video! I envy the pneumatic tools you use. I wanted to ask you the SCFM/PSI compressor specs you need to operate them properly (sander, sable saw, etc). Thanks!
@DUBDUECE05
11 жыл бұрын
Finally a good tut thanks man
@FlipIR
11 жыл бұрын
good video ... good instructions, clear sound - I like it :)
@savadious
9 жыл бұрын
This is some amazing shit ! Doing it this week ! Thx yo
@mingming7252
11 жыл бұрын
thank you! for your video it great to share knowhow that easy to do kick panel with my self.thank !!!!!
@RockfordF150Bass
7 жыл бұрын
awesome vid u made it look simple 👍👍
@user-lc7zy4db1s
6 жыл бұрын
turned out super good
@CR-vv7tt
4 жыл бұрын
Awesome! Thank you for the vid!
@ramelrogers7996
4 жыл бұрын
Excellent content
@Dandoesit66
8 жыл бұрын
Great video. I will make my own.
@versidus
10 жыл бұрын
this was a really good vid, thanks!
@infidel24
7 жыл бұрын
Nice video dude, just gained a new sub. Thank you
@keningalls5593
10 жыл бұрын
yeah how did you secure it ?
@MrGonzales1982
4 жыл бұрын
How do you know if you left enough air space for the speaker specs.?
@AttmKeller
11 жыл бұрын
Nice job Man. Hello From Paris.
@TheDeathrows
7 жыл бұрын
what is the name of premair you use for smoothing? please
@SlingShotNinja
4 жыл бұрын
Brother i love this. The bell is on
@eddieromero6312
10 жыл бұрын
Question? If I use fiberglass that already has resin in it would this still work? I work making windows for jets and we use fiberglass with white. Black and carbon fiber would any of that work? If so I can take some from my work to do this project. Answer me asap plz, looking forward to making my mods
@jayatwood5856
10 жыл бұрын
can u send me the list of items to buy to do this project so i can have a shopping list already printed out? i wanna do this to my truck and to my doors too. so far best video i've seen on doing the molds. also the small wood piece u glued in the center to hold the rings what angle is the block cut is it 45 degrees? great job!!
@spectralcodec
11 жыл бұрын
Great videos, thanks!
@hellofyou
11 жыл бұрын
Pretty nice video you have made here. Although i did not understood everything (i am not a native English speaker). I like it.
@Pookietokes181
6 жыл бұрын
Good job. Decent video thanks g
@ultrasubscribe
9 жыл бұрын
Nice tutorial subscriebed !!
@christopherbaxley9780
4 жыл бұрын
Good job but a lot of us are wondering how you mounted it after you were done. Could you please provide us an answer? Thanks in advance.
@Grayback1973
7 жыл бұрын
Awesome video....thank you
@scottellard1
11 жыл бұрын
piece looked great
@currishev
10 жыл бұрын
I love the post: precise, concise, and clear!! thx. Can I make fiberglass tubes ~.5-1.5"OD ~.3-1mm thick that are flexible but capable to transmit ~200 Nm torque?
@cynthiasparks1444
5 жыл бұрын
currish
@luisparamo9402
4 жыл бұрын
Awesome nice work
@DanielSanchez-js5ts
9 жыл бұрын
to lay the fabric is to be cut to the shape of mold so that it is smooth
@mapa009
10 жыл бұрын
Muy bueno perfecto y gracias!!! Estaría bien saber le nombre de los materiales
@johnl5217
7 жыл бұрын
Great Video Thanks 👍
@MrAleeex1212
10 жыл бұрын
is it regular fleece you are using?
@uzumakiitachi6571
11 жыл бұрын
HurtUGood86...what brand saw did you use to cut that perfect circle?
@BasStudio73
11 жыл бұрын
Hello. I want you to ask you for the spray use to bump coverage. Waiting for reply thanks.
@soonerfan065
10 жыл бұрын
How did you secure it in your vehicle
@ELDELASECION
11 жыл бұрын
you deserve my respect
@davidandlaurie1
4 жыл бұрын
Can u plz tell me what product u use for all steps. It help s ppl like my self
@ispeakmymind247
6 жыл бұрын
Great look and solid build, but what about the tweeter? Holesaw?
@RobHTech
3 жыл бұрын
cooking spray? didn't think of that. great vid
@RickPreciado
11 жыл бұрын
Thanks bro. Now i wish i had the right tools ha!
@Modzie868
3 жыл бұрын
How do you bolt on the panel to the kicks?
@slickshaawn40
9 жыл бұрын
How much would you charge to some kick panels for a 99 surburban
@sipiesipie2877
3 жыл бұрын
Good job dude
@hurtugood86
11 жыл бұрын
Thanks for the support. More videos to come soon.
@robertomixo
10 жыл бұрын
hello friend, greath video, the spray you use to make the mold, which is? (0.33 min)
@120372williamjesus
4 жыл бұрын
Hi my friend!!!! What kind of cloth did you use, please? Thank you!!!
@bryangreen1981
11 жыл бұрын
Def great video
@TylerDylan21
Жыл бұрын
The cooking spray work with metal too?
@disabledvet420
11 жыл бұрын
nice vid man!
@ve6wo
10 жыл бұрын
Good vid!
@rf4215
10 ай бұрын
Hey Holmes. Great job!!! - this piece you made, is it thick enough? I see guys putting multiple layers of fiberglass mesh.
@Kcnoel94
11 жыл бұрын
I feel as though you are a good teacher, Could we get some trunk or other fiberglass work tuts?
@2ohmguyoms58
8 жыл бұрын
having watched this video. I'm going to try it......
@shawnio
6 ай бұрын
I would do coats of that primer build up and sand down twice if you want a less glossy surface like that
Пікірлер: 252