Thank you for the details and explanation of everything! No one else on Utube is nearly as informative.
@cornfromajar3222
21 күн бұрын
Thanks for coming by!
@STVG71
Жыл бұрын
Thank you so much for the time to make this video! I bought my Springfield M1 yesterday and I'm super excited for it's arrival next week. Super informative video! Cheers!
@cornfromajar3222
Жыл бұрын
Thanks for coming by!
@Stydown
Жыл бұрын
Excellent video. I like your straightforward explanation, and also appreciate you stopping the video, to add still shots of what you're doing. Well done!
@cornfromajar3222
Жыл бұрын
Thank you and thanks for coming by!
@elviso68
4 ай бұрын
Thanks for your video of disassembling M1a/ M14 I bought mine M1A two months ago and video helps me a lot for cleaning after shooting today. It is really simple and reliable rifle 👍
@cornfromajar3222
4 ай бұрын
Thanks for coming by!
@Calventius
8 ай бұрын
Clear instructions. Best briefing I have seen so far.
@cornfromajar3222
8 ай бұрын
Thank you!
@garyreid2178
Жыл бұрын
I am interested in purchasing the Springfield Armory Scout Squad rifle when I get the money. I always make a point to field strip any semiautomatic firearm I purchase because it is important to learn how to clean and maintain the firearm. I do before firing the weapon. Great detailed video.
@cornfromajar3222
Жыл бұрын
Thank you and thanks for coming by!
@ricardocamacho6829
Жыл бұрын
Dude I love your video haha don't change
@cornfromajar3222
Жыл бұрын
Thanks for coming by!
@davidschaadt3460
Жыл бұрын
I have a Rock-Ola also. Very nice gun. I've only fired about twenty rounds out of it but it's really accurate.
@cornfromajar3222
Жыл бұрын
I’m impressed with mine, I’d never heard of them before I saw this one. And it cost me four guns in a trade to get it (ouch!) thanks for coming by!
@marvinhenderson6379
Жыл бұрын
very good video ,I am going to replace my hand guard with one that has a picatinny forward mount rail your video, will help me out. Thanks again !!
@cornfromajar3222
Жыл бұрын
Best of luck! Thank you!!
@MegaRiffraff
2 жыл бұрын
I could have bought one of these for $600.00 at a sale 20 years or so ago when our local vfw sold off some of their things , it had the fake selector switch , but they cut a notch in the receiver for the the selector rod stub , it looked like they cut it with a Dremel tool and a chisel , But now I wish now i had bought it anyway.
@cornfromajar3222
2 жыл бұрын
Shew that sounded like an opportunity you regret and I know I’d feel the same way. Looking back over the years I’ve passed on a couple bargains that I thought would be a bad idea but had other thoughts later. Thanks for sharing and thanks for coming by!
@mikesmith-wk7vy
5 ай бұрын
james river armory , thats a hard one to find. the finish is alot shiner than the Bula
@cornfromajar3222
5 ай бұрын
I hadn’t really heard of it, I was on the market for an M1A and found a guy willing to trade so it’s the one I ended up with. No complaints though! Thanks for coming by!
@stoveboltsix
11 ай бұрын
Excellent, informative video. I have a Socom 16, I've followed your instructions, and I've found the "sweet spot", however I cannot get the op rod to release. Any suggestions? Thanks in advance...Clint
@cornfromajar3222
10 ай бұрын
I wish I could help, it’s tough without seeing the gun firsthand. The first few times I broke mine down it took quite a bit of wiggling and working around before I finally got it loose. Good luck and I hope you get this worked out. Thanks for coming by!
@renevaleriano2778
2 жыл бұрын
Thank you.
@cornfromajar3222
2 жыл бұрын
You’re welcome thanks for coming by!
@theexecutionerk
Ай бұрын
I’m having a horrible time trying to take the trigger group off my Polytech rifle, are they any different to the American ones?
@cornfromajar3222
27 күн бұрын
I wouldn’t think so, but I’ve never seen one in person so I can’t say for sure. If it causes that many problems, it might be time to take it to a gunsmith. Thanks for coming by!
@johnzajac9849
Жыл бұрын
I have a Springfield M1A. I tried and tried, but the pulling-back idea won't work! The trigger guard will not budge to the rear as you're showing it.
@cornfromajar3222
Жыл бұрын
It is under a little tension, almost like a spring. Maybe oil it at the point where the trigger guard connects to the rifle on both sides and let it sit for a while. If it still won’t release you might want to have a gunsmith look at it. Thanks for coming by!
@johnzajac9849
Жыл бұрын
@@cornfromajar3222 I learned that placing a screwdriver or another length of metal in to the small hole in the rear of the trigger guard - and pulling up - will release the guard. It works very well.
@ronenton4037
Жыл бұрын
Use a screwdriver sideways for extra leverage. Earlier Garands had a hole there for that purpose
@davidschaadt3460
Жыл бұрын
The hammer has to be cocked with the safety on also ,and it could be tight.
@al_wick4282
2 жыл бұрын
A+
@cornfromajar3222
2 жыл бұрын
Thank you! And thanks for coming by!
@SpetznazSamson
2 жыл бұрын
And at what time you took screws off on both sides of a stock that's holding action assembly?
@cornfromajar3222
2 жыл бұрын
If you field strip according to the army manual, you shouldn’t have to take off any screws. Thanks for coming by!
@ronenton4037
Жыл бұрын
Those are stock liner screws which hold your stock liner in. You dont normally want/need to take them out.
@Greg-or7wy
18 күн бұрын
Fantastic work
@cornfromajar3222
15 күн бұрын
Thanks for coming by!
@pseudopretentions1722
Жыл бұрын
Seems like a pain in the ass to dissasmble, compared to its competitors
@cornfromajar3222
Жыл бұрын
It does take some getting used to. Thanks coming by!
@michaelkradenych6408
9 ай бұрын
Lol....yea let's make sure the weapon is QUEER.....CLEAR......
@cornfromajar3222
8 ай бұрын
Thanks for coming by!
@malabuu_1557
7 ай бұрын
Very helpful. My bolt separated from the op rod at the range today and this helped me learn more about my rifle. Thanks
@cornfromajar3222
7 ай бұрын
Thanks for coming by!
@bernardomartinez6833
Жыл бұрын
You didn't take the gas chamber piston out!!!???
@cornfromajar3222
Жыл бұрын
No sir I didn’t. Maybe I should do a follow up and include that! Thanks for coming by!
@JOHANNYGONZALEZ-iy6fl
Жыл бұрын
Exelente
@cornfromajar3222
Жыл бұрын
Thanks for coming by!
@ursaferrarius
2 жыл бұрын
First!! good video
@cornfromajar3222
2 жыл бұрын
Thank you! Thanks for coming by!
@tombutler570
Жыл бұрын
@@cornfromajar3222 try it as a timed event blindfolded, USMC 1966 lol
Пікірлер: 53