That is how my dad who had a sawmill taught me to sharpen 50 years ago and it still works all these years later. Now I am learning to square file and I think I like it. Heating fuel is going to be extra expensive this winter thanks to a certain persons policies so a great wood pile is a great money saver.
@HQHQHQHQHQHQHQHQHQHQHQHQHQHQHQ
2 жыл бұрын
Oh yeah! Square filing is great! I started to square file a bit more than year ago and i like it better! Thanks to Buckin'!
@robertfoster7339
2 жыл бұрын
Man I really liked your video but it looks like you're left hand is more square with bar than the right. Not being a smartass , just an observation. I sharpen a chain the same way. The video was very informative, thanks !
@hillbilly4christ638
Жыл бұрын
I have been collecting firewood for some time. I saw a video of this guy north of the Arctic circle collecting firewood and he looked like he had enough for several years but it didn't stop him from collecting more. There is nothing like the radiant heat from a proper wood stove unless you are eating some bean with ham soup.
@byerboys2607
Жыл бұрын
@@hillbilly4christ638 Iam in Ohio our winters as of late haven’t been to bad but bare minimum I keep 3 winter worth of wood all the time my thought was what if I get hurt or sick and can’t cut for a season atleast that way I have wood here that’s easy to get so I can heal up just my thought on multiple years of wood and it gives the wood time to season up good I like atleast a year season but 2-3 is better that way you know for a fact it’s as dry as it can be and it burns half again hotter seasoned 2 years versus 1 year just my opinion/thought lol
@sunplatone8924
28 күн бұрын
I'm a little late to your Chanel, but I'm loving the content! I have a suggestion for your winter cutting. My uncle used to customize chains for dirty hardwood., he would use his silvey grinder, take an old beat up chain, and change the top plate angle from the traditional 25-30° to somewhere between 15-20° with a touch lower on the rakers. This with a skip tooth chain would hit more like a chisel then a cutter, and the skip would give the momentum to pull through. It was an excellent chain fir hard wood, I even cut through a metal T post with a 346xp, full house 18" chain, that wad right behind my hing on a 22" eucalyptus blue gum that was planted on a fence line. That chain would hit rock and dirt in a flush cut and only dull 3 teeth. If you still have a grinder and some old chain, I suggest messing around with those degrees between milling chain, and the 30° popularized by logging semi soft wood, that is sold by oregon, stihl, and all the other popular brands.
@anemonemechanics3175
Жыл бұрын
Yes! Sharp advice, well articulated. I’m in the UK and I sharpen exactly like this. I tap the file to clear the swarf, I lift the file on the back stroke to prevent the teeth ‘knocking over’, I file ‘til it raises a burr and the burr falls off and I can't see the sharp edge, end on. I don’t use gadgets, except for a depth gauge file guide. And then I round off the back of the ‘flat’ on the top of the depth gauge to mimic the original profile - important on a chain without anti-kickback ramps like yours has. You stress the importance of correct height on the depth gauge (which you call a raker). Low depth gauges, exactly as you say) produces grabbing and vibration. And then your saw cuts without your having to apply any pressure. I'm always stressing this because by pushing on the saw to make it cut, you are gripping tighter. This exacerbates the effects of vibration, despite A/V mounts. Vibration damages tissues and can result in carpal tunnel syndrome or Reynaud’s syndrome (also known as whitefinger or HAVS). There is an operation for the first (painful and needs rehab afterwards plus time off work) but for Hand Arm Vibration Syndrome, it’s nerve damage. Nerves don’t regenerate, so it’s yours for life. Happy days. Keep posting, Tinman.
@G-PA-2795
3 жыл бұрын
Buckin has for sure taught thousands of people to PROPERLY sharpen their chains. I thought I did a pretty good job. Self taught and 30 years of cutting firewood. After watching Buckin's videos I was like WOW really. Now my chains have never been sharper.
@JTECH7766
3 жыл бұрын
I switched to a 2 in 1 after going to buy a new file and being up sold the 2 in 1 and I'll never use anything else again. Saves having to go over the rakers and sharpens bloody awesome. I've sharpened chains that cut better than out of the box!
@jonbobskunkworks
3 жыл бұрын
I went to square and never looked back! Round is great but once I figured out the square it’s just as quick.
@WildAcresFarms
3 жыл бұрын
Hand filed square is tricker to learn but man does it cut gloriously.
@andrewslagle1974
3 жыл бұрын
I thought i was good at filing till i watched your and billys videos . Thanks for the tips.
@stevetheriault4164
3 жыл бұрын
I HAVE A BIG BELLY SO IM A GREAT CHAIN SHARPENER I GUESS ALL THOSE SUNDAY ROASTBEEF DINNERS HELPED ME OUT🤣🤣🤣👍🏽👍🏽👍🏽LOL ALL JOKES ASIDE GREAT VIDEO TINMAN GREAT WAY OF EXPLAINING THINGS TAKE CARE BUDDY
@sandy7299
Жыл бұрын
Yep my belly's my saw vice too 😂
@rickmuha4278
2 жыл бұрын
Good job! I used to grind the chains ! I switched to filing after I watched a Buckin Billy Ray video! It takes a while however once you master the file you’ll never go back I like to touch up the chain every time I gas up the saw! I bought a little stump vice to sharpen in the field!
@chapsmaketory3960
3 жыл бұрын
Yea buckin taught me how to file a wicked chain as well..even got my square filing on point ..now I'm hooked on square filed chain!!
@ClintsHobbiesDIY
3 жыл бұрын
Since 1976 I've tried every gismo made. I also use only a file now. Like you said, I've never seen a logger use nothing but a file.
@simpleman4224
3 жыл бұрын
That’s right!
@gregmccarter2176
Жыл бұрын
A dull chain will heat up to the point of causing chain to stretch. That's why I always dress the chain when I re fuel.
@hk93shooter
2 жыл бұрын
a sharp chain, saves gas, saves energy, saves time and makes work fun again. get that gullet.
@jfoel297
10 ай бұрын
Just came across this and I appreciate your insight. I've been heating my house with wood since 1984 and got into the electric sharpener gimmicks. It's nice to hand sharpen again. Oh, my wife heard the last of you video and the comment about a life changing experience...she said you've been in the woods way too long! Bwahaha! Then she gave me that "wink" ;)
@two-strokesmoke7289
2 жыл бұрын
Firewood is the bomb, sharpening a chainsaw is essential to this. This is a very good instructional vid. I have watched dozens of sharpening vids. You have covered everything here, I agree with the exercise thing for sure, I am 61 it is even more important now......thanks for this vid.
@Adveniotu
2 жыл бұрын
I was instructed to generally sharpen the teeth in such a manner that 1/8 of the file stands proud of the top of the tooth when passing through the gullet. Definitely wait until the burr forms and disappears, as mentioned. Was also under the impression that lowering the rakers in a uniform manner as a set, rather than per tooth, was a good way to ensure a smooth-cutting chain. I believe the assumption is that any teeth that are too high (needed less filing initially) will be dulled early (yes there is some chatter) and will be addressed at the next sharpening, haha. So far so good, on my end. Also, the file has a twist built in, so I rotate the file every 10 swipes or so instead of twisting. They seem to wear more evenly.
@ScrewdriverTUNING
3 жыл бұрын
Beautiful rendition. Turn the G into a C 💪🏻🪓🦾. Great work Tinman !!!! Kindness and love
@welshmanbob3889
3 жыл бұрын
Is it me but I find great satisfaction in hand filing. My first attempts were a disaster !!! Like you after watching Buckin BR, my chainsaw now rips through logs like butter. Great video as usual . Wish I could give more than one👍
@gunterbecker8528
7 ай бұрын
❤ couldn't agree with you more, handfiling is so therapeutic! Tinman is a real artificer!
@prebaned
Жыл бұрын
Throw away those sharpening guides, now use this raker guide🤔
@jordanking6283
3 жыл бұрын
Another great video tinman. Good sharp chain extends the life of the powersaw👍🏼
@allanwells4886
3 жыл бұрын
Good job. I like to mark the top of the first tooth I sharpen with a speck of paint or a sharpie so I know where I began.
@green-zone36
3 жыл бұрын
Can't argue with a chain cutting like that. Great job on the sharpening.
@bc30cal99
3 жыл бұрын
Morning sir, good sharpening tutorial here. A couple additional ideas. You were tapping the file - that's to clean it out folks. They load up quite quick and need to be cleaned. Speaking of files - they're relatively cheap - I buy them a box at a time and when they're even a wee bit dull they go away. Filing on the tailgate is about right for most people for height and ergonomics. If you take even a 2' long chunk of 6"x 6" or a tad bigger, cut a slot into it and drop the front of the bar in that slot while sharpening it'll squirm around less. Anyways, just thoughts from a semi-old guy who's been cutting firewood for 40+ years. Stay well Tinman.
@shapeshifter7753
3 жыл бұрын
Ya anything you can do to get that saw more stable while learning will help immensely! I’ll also tighten the chain on the bar before starting. Quite tight. Stops that bit of wiggle the chain gets on the bar. Just remember to loosen it again afterwards. Good tip there RC
@onestopfabshop3224
3 жыл бұрын
WHAT? You weren't born knowing how to port? I knew a guy that did a little porting on his way out! Lol Great video Tinman. Thank you, you're appreciated.
@AdvancedLawn
3 жыл бұрын
Those advanced cut Oregon chains are great for climbing saws. I swear by them. The husky progressive raker gauge gets them good
@jessealeman7952
Жыл бұрын
Sharpening a chain is therapeutic .
@steveking4966
3 жыл бұрын
i've just been watching "guilty of treeson's" guide too square filing well worth a look they compared round and square came out 45% faster with square!!! really buckin is great on his filing and correct but square filing is like warp speeding your cutting! with the right angles it can make a more durable tooth edge, i was shockingly impressed!
@customcutter100
3 жыл бұрын
Yes, I watched their video a month or so ago. I could not believe the difference in a new chain vs hand filed round file, and hand filed square filed. Time in the cut went from almost :30 seconds to less than :15. Why all the porting, etc chasing seconds when filing made a bigger difference.
@willisfranks2476
3 жыл бұрын
Looked just like BBR's vids. Nice job. I am now trying to hand file my own chains. Take Care, Stay Safe and Be Kind...
@johnrosier1686
3 жыл бұрын
You mentioned needing to wear cheaters- they can actually help when sharpening a chain so you can see burrs on the chain that you might not catch with the naked eye. Nothing wrong with a little bit of eye protection at the same time. Thanks for this how to video and the encouragement to go out and make it happen.
@sagebrushhillbilly4655
2 жыл бұрын
Look at those chips! Thats a mighty good lookin chain.
@thesmallwoodlot433
3 жыл бұрын
I also use a sharpie to mark my start point, but soon i will have to have Chris sharpen the chains, because i know i wont be able to see the gullet in a few years. I was taught to put a sharpie coating into the gullet many years ago, to be able to see that i was getting the gullet and to check my angles, these are a few good tricks to help a person learn about sharpening a chain. How it works is the dot on top identifies the start point, the coloring of the gullet area shows how you are sharpening, so if you miss an area of the gullet, you will see the remaining sharpie mark, and need to either continue to sharpen or change your angle!
@HQHQHQHQHQHQHQHQHQHQHQHQHQHQHQ
2 жыл бұрын
All those complicated tools are just marketing product to get more money from people... Need only a file for tooth and 2nd one for rakers and a raker gauge, that's all!👍 Great video!
@edmiller4695
3 жыл бұрын
between you and Buckin I finally "sharpened" my chain. I used to go through the motion of filling, but what a difference getting the Gullet will do for you.
@marklam8548
3 жыл бұрын
So...A deeper gullet will throw longer shaving/chip instead wasting energy on cutting it up again and throwing it.
@simpleman4224
3 жыл бұрын
Every one has to learn to do anything, practice makes perfect! Great info! Thanks for sharing buddy! 👍👍👍👍🇺🇸🇺🇸🇺🇸🇺🇸🙏🙏🙏🙏
@ClintsHobbiesDIY
3 жыл бұрын
I've spent a bunch of money to end up doing it the basic way.
@simpleman4224
3 жыл бұрын
@@ClintsHobbiesDIY haha, you ain’t by yourself!
@jacobhein4319
3 жыл бұрын
These are such informational videos that you have been putting out! I've learned so much about porting from you and The Ironhorse. In fact you two helped me port my first power saw with fantastic results. I always can't wait to see your new videos.
@tinmanssaws
3 жыл бұрын
Thats awesome!! Sharing knowledge is what its all about!!
@stuartramage5933
3 жыл бұрын
Hi tinman. Nice wee add onto to the pick up truck also saw sounds awesome
@Patrick_B687-3
3 жыл бұрын
First Steve, then Buckin, and he inspired me to learn this. Been loving your channel, and if I ever send my saw out, it’s coming to you. This helped me on the rakers man, I appreciate it.
@indigatorveritatis8891
Жыл бұрын
I hand file this way, and every 2 or 3 I run the Stihl 2 in 1. It's a matter of efficiency, keeps me in the game all day long. The Stihl 2 in 1 is not just for beginners, but a little slower and hand filing gets the gullet and the underside of the top plate a little better, imho.
@AdvancedLawn
3 жыл бұрын
Love it tin man. I hit mine like that too. The wild thing I ported after ur steps cuts like maaaaaad
@keithouellette4075
3 жыл бұрын
Hey Tinman, just came to your channel via Buckin Billy , I cut lots of firewood for myself and others and I agree , you need a sharp chain, cutting with a dull chain is hard on the saw and hard on yourself
@BrucesShop
3 жыл бұрын
Wise words. Thanks. i am 65 Still going in the shop.
@Lifeinthe906
3 жыл бұрын
Beautiful job on the file there Tinman. My filing is getting close. Still use one guide occasionally. Thanks for sharing
@michaelmclellan6286
3 жыл бұрын
Yup she cuts.oregon files from the big box stores don't last 3 files maybe great video
@jeffmorrow1957
2 жыл бұрын
Great video Tinman. Please explain to me the importance of pulling the starter cord out before killing the engine, I’m trying to learn all I can and really appreciate you
@444gtb
Жыл бұрын
Spot on!
@linkwokeup
3 жыл бұрын
Also, buying a machine like a chain grinder has a negative effect on the environment (collectively, it adds up). Blunt files can be thrown in the scrap steel bin and be recycled with a bit of energy, which may have come from the sun, or wind, etc. Just another tick for hand filing.
@ToddAdams1234
Жыл бұрын
Hand sharpening is the “peaceful” part of running MY saws. It’s when I get to take a break and assess myself for: tired, thirsty, hungry, or anything else for that matter. Heck, it gives my brain a chance to think about other things besides that big “potentially” dangerous thing that I’m running.
@BunkerhillRanch
8 ай бұрын
Great information-thank you. I agree-life is better after cutting wood. Interested in how you “hop up” your saws! When I was a kid-I had a Rupp Dart Kart w a Mac91B motor that I windowed the piston on. It ran like a bat outta hell. I would coast backwards down our driveway, and the burn rubber all the way up until my dad finally told me to knock that shit off. I run a Stihl 441 Mag clearing my land here in Arkinsaw-How do we hop it up ? 🤔
@antitactical
3 жыл бұрын
When I get down to the witness marks that's when I goof around square filing
@carysmith9039
2 жыл бұрын
Great video
@marcduclos9789
3 жыл бұрын
It is Billy Ray that gave me a way for success. I just uploaded two video's paying homage to Buckin one is Bucking Red Oak in NH. and the other is Falling a red Oak with Humboldt in NH. Its good to hear an other say it the way it is. Thanks
@georgeantonaros5580
2 жыл бұрын
Great Video Tinman !! 😎
@loganwhite6403
3 жыл бұрын
Buckin changed the game once he start teaching people how to hand file it's way better then any guide tool. Plus is there really anything more relaxing then sitting down an filing
@tlpoutdoorsman
8 ай бұрын
Sorry tin man... the stihl 2 in one sharpener is the best device I have ever used in 35 years in 4 strokes your chain rt before your eyes shapes into a brand new chain and files the rakers at the same time. You cannot tell the difference between a new chain and the one I filed, not to mention sharper than factory
@zack6892
2 жыл бұрын
I file the same way but I like to keep a file guide for the shop. After work I’ll sharpen all my chains free hand but then take a file guide and by tilting the guide back a little I can get a thinner edge on the top plate. It only takes a swipe or two after a full sharpen and it will be razor sharp. I kinda took that from guilty of treeson channel although he probably does it a little different.
@slpc30
3 жыл бұрын
Man your videos are so amazing and helpful thank you!
@rossrossier935
2 жыл бұрын
Thanx for the tips on pistons Tinman¡ Goin to try this on a couple XLs I have.
@larryreno8293
3 жыл бұрын
I here your words Tinman. I don’t go to the gym for a workout I hit the wood pile!
@bencarey8988
3 жыл бұрын
Billy Ray is the GOAT
@Chiefbuzzbee
2 жыл бұрын
Great video, learned a lot ! I also subscribe
@Hollywoodhouse74
2 жыл бұрын
I hand file as well.. make the chain pull into the log...
@kevinmaxam2414
3 жыл бұрын
Tinman how about a vid on grinding and what you use. Not an endorsement of grinder just a learning vid. Keep the vids coming. Be safe and be careful.
@ChosenOne9387
Жыл бұрын
Like u said I used to hate filing my chains but now I love it. I'm gonna go file my chains now might go get wood tomorrow 🪵🪵🪵🪵🪵🪓 Thanks to you and Buckin' Billy Ray for the inspiration 👍😀
@rogervonschleusingen4603
2 жыл бұрын
THANK-YOU VERY MUCH FOR YOUR DEMOSTRATION SIR .
@terrycalvert7812
Жыл бұрын
Good video liked it a lot much better hat! Notice it looks like you use the same files as buckn his has the green ring at the end what brand are they? They seem to really take the metal off quick
@ToddAdams1234
Жыл бұрын
Oregon files. That’s the only files that I’ve ever seen with the factory painted ends. It may just be a “Canadian” thing though. 😮
@invisiblerevolution
Жыл бұрын
Good video!
@sebastianleicht
3 жыл бұрын
Great Video! Thanks to Buckin' and the Tinman!
@kennethlittle867
9 ай бұрын
I use a roller guide and seems to work
@McCallContractKlimber
3 жыл бұрын
Amen . Never have used a file guide , EVER. Personally I think they are a waste of time
@dcrog69
3 жыл бұрын
Ha! I clicked on this thinking it was a Buckin Billy Ray video.
@reganavery831
3 жыл бұрын
Thanks for the video I as well am way better at hand filling thanks to buckin. It has made me enjoy running a saw much more. If you want to try another file brand I like save edge they are pretty sharp and quick cutting. And I also like pferd they have many different cutting files
@desmondmcguinness4668
2 жыл бұрын
i get that old school is good been there done that im 51 but times move on a new chain is only $15 bucks these days half an hour sharpening is wasting $40 an hour of working time so makes no sense to me respect xxx
@thomasdavenport508
2 жыл бұрын
There's only ONE way! Hand filing. This is it. I made a hand filing out of an old wood cable spool, an old 3.5" vise, and some old pieces of 2x4 and 2x12. Now I can sit on my ass while I hand file in the shop. It's pretty friggin sweet. Sittin on my ass, listenin to tunes, with a peench of snuff, and hand filing away. 👏🤣
@michaelwhiteoldtimer7648
3 жыл бұрын
THAT IS WHY I TUNED INTO BUCKINS CHANNEL SO LONG AGO
@KainKustomGarage
3 жыл бұрын
Thanks Tinman! I'm still struggling with it !
@shapeshifter7753
3 жыл бұрын
Stay with it Kain👍it’s like learning how to play an instrument. Practice practice practice. What helped me the most other than this amazing community is this. Don’t let it get too far gone between sharpening’s. Touch it up after each tank or two. It’s far less daunting of a task and you’ll get more practice in a shorter span. Building up your muscle memory each time. Hope this helps🙂
@KainKustomGarage
3 жыл бұрын
@@shapeshifter7753 Thank buddy! Practice makes perfect....I still get a little confused on what file size to use also...is there a quick rule of thumb?
@shapeshifter7753
3 жыл бұрын
Kain Kustom Garage I don’t hear this mentioned ever but my experience is line up the bottom of your file to the second bend below your cutter. The top of your file should now be just above your cutting edge. That bend is also a guide😉keep filling following that bend in the side plate and you’ll always have the correct gullet profile😁 have a good look. She’s subtle but this helped me a lot! Mostly cause I deal with various brands and vintages of chain
@KainKustomGarage
3 жыл бұрын
@@shapeshifter7753 Cool! I'll try that!
@shapeshifter7753
3 жыл бұрын
Kain Kustom Garage god speed freind😎
@thomaskapetantsis4951
3 ай бұрын
I can’t do it this way. I have to turn the saw around to do the other teeth. I thought the rackers had to be a little bit lower than the teeth.
@stuartramage5933
3 жыл бұрын
Nice wee video tinman
@johnsuch5914
3 жыл бұрын
Love it ...Thank you and what brand files you using ???
@jeffreyrubish347
3 жыл бұрын
Filing guides are like bicycle training wheels. Better to learn without using them.
@paulhester1904
2 жыл бұрын
What chain company puts the witness mark on the chain.
@edwardbright5894
2 жыл бұрын
Buckingbillyray🤠👍🇺🇸
@thorshammer56
Жыл бұрын
HELP... I cannot find a 1/8 Round file at any hardware shore ( not in Lowes , not in Home Depot , not on Amazon ) for Mini chainsaw
@ericsalyer2869
3 жыл бұрын
Clean your files with a wire brush or wire wheel on a bench grinder Literally get 2x as many files cleaning the cutters out properly
@shapeshifter7753
3 жыл бұрын
Right on there. I use a file card. It’s sole purpose is to clean files
@jasonbubley9427
2 жыл бұрын
Tinnman is the only manitoban I like.
@zachwebb6879
2 жыл бұрын
I count out of ocd and to have an idea of how much I had to work that tooth if one take 30 and one take 15 then on takes about 30 I check my riders and oiler just helps me catch things before it's to late and damage the bar or kills the chain
@tlpoutdoorsman
10 ай бұрын
I can tell u rt now throw away your chain with the double rakers! For a guy that uses a saw alot, u would get way better performance
@DaveyBlue32
3 жыл бұрын
Hey there bud....do you know if Tony has a place to order those 90 degree heads that he sent you and Harvey? I want to order one of those...?
@logman6656
3 жыл бұрын
Good video mate the only file that does my head in is 4mm for my 200t so small and bendy lol good tips
@lakestatebullies7391
3 жыл бұрын
Gamn sharpener works great fast and even
@patrickmoore8428
3 ай бұрын
How to get a file that will cut the rakers . Mine just slides over
@shapeshifter7753
3 жыл бұрын
To the new filer: if it’s a brand new chain your working on and you swear it’s the right sized file but it just doesn’t fit into the gullet; my experience is the factory has put a nub in front of the gullet that needs to be filed off to get that file to find its way into the gullet. God speed on yer sharpening journey😃it is a process... One that should be repeated and practiced as often as possible at first. Just practice friends. That’s all
@AnDrEw122100
3 жыл бұрын
I never get the gullet on my first file , I just pull back to train it , usually second file is getting into the gullet lol
@ericsalyer2869
3 жыл бұрын
That’s riiight I can file a mean chain with a round file I don’t use any guides. Even for my rakers If I know the cutter is sharp but not grabbing I’ll take 2 strokes off the rakers
@ozdatman
3 жыл бұрын
Looks like a nice day to be outside.
@ChippyOutdoors
3 жыл бұрын
I know someone who has x number of chains, uses them all and sends them in for sharpening, I asked why not sharpen them as you go? Replies "couldn't be bothered to waste time filing". Each to their own. I rather sharpen my own but i touch up the chain every few tanks before it ever gets dull and not only to keep it sharp, but I find when they are too dull and I seen some reallllly badly rounded top plates, but you get more life I find from a chain. Round out a topplate and it takes more material to get it sharp again then it would have been to maintain the chain and shortens life of it too
@shapeshifter7753
3 жыл бұрын
It’s true. It’s easier to just keep em sharp👍
@Matt-uj6jm
11 ай бұрын
Throw away your file ? And buy a dremel chain sharpening attachment 100% transformation 🤟🤟🏴
@joelusk3432
3 жыл бұрын
I find the oregon files are a smoother cut the husqvarna intensive cuts are great files but are an aggressive cutting file and dont seem to last as long as the oregon files ill get about 10 sharpenings on the oregon file on a 24" bar and only about 6-8 on the husqvarna
@glennnolan824
2 жыл бұрын
I put dots on mine as well 🤣
@jensenwilliam5434
3 жыл бұрын
Thank you!!
@Engine4dragon
3 жыл бұрын
What brands of files do you recommend. I have used the oregon files from the big box stores and they dull rather quick and do not cut very fast. I get maybe three sharpening's out of them before they are toast.
@JourneyNorthAK
3 жыл бұрын
I use to run Oregon and husky.. but switched to stihl files..and I like them much better
@onestopfabshop3224
3 жыл бұрын
Oh yeah, I always mark wry chain where I start. 1 mark in each side I do.
Пікірлер: 160