The old man grunting noises while he works is how i know he's legit. Every old dude ive worked with in the trades sounds identical
@JasonCooper-p8t
8 ай бұрын
Cause they are worn out worked hard their whole life
@cliffbradford4679
6 ай бұрын
He looks like Hannibal lecter
@craigfulmer5069
5 ай бұрын
No knee pads. He tough.
@dawick5
16 күн бұрын
No he's a South African... He's not tough. He is a fricken beast.
@Add_Bill
10 ай бұрын
This is the best roof repair video I've seen. Nothing is worst that seeing rain water drip into your new house or business because the roofer botched the roof install. This guy knows how to fix the mistakes permenantly! Keep up the good work!
@w.e.s.
Ай бұрын
No fix like this is permanent. Only a new roof is semi permanent.
@jimmysmith9957
Жыл бұрын
Thank you for making this video. Lots of great information for those wanting to learn how to make repairs like this.
@burchman3
Жыл бұрын
Thank you for helping me fix my incorrectly installed metal roof on my mobile home. It's been leaking ever since I bought it and cannot afford 20,000.00 to replace it. After watching your easy videos I have fixed most of them myself with a fraction of the cost. I really appreciate your knowledge.
@Damian_mtn
11 ай бұрын
What’s the materials that you are using for repair??
@debbimeekins4047
12 күн бұрын
Did you ever get an answer?
@jeffreylonigro4081
10 күн бұрын
Bergstrom Turbo Poly seal.
@Guerrero1187
7 ай бұрын
The sniffles and grunts and groans remind me of work with my dad rip pops
@MrMoss786
2 жыл бұрын
This video was so good, I had to watch it again and downloaded it for reference later. Thanks again.
@FlatRoofDoctor
2 жыл бұрын
Glad it was helpful!
@consideratek9
Жыл бұрын
at first glance, it looks like he is fixing these leaks with toilet paper and baby doo doo.
@bryankelley4861
8 ай бұрын
2ply
@cliffbradford4679
6 ай бұрын
Same here my brother. I even commented on him using scissors to cut toilet paper 😂
@Tattooclownfish71
4 ай бұрын
What’s it called and where to buy it ? Anyone ??
@cliffbradford4679
4 ай бұрын
@@Tattooclownfish71 dokie ruff glue made by baby bottom materials
@Grace_oGD
Жыл бұрын
You are amazing Thank you so much for this and for making it look so simple.
@chananon8120
Жыл бұрын
How much toilet paper roll to put on seam?
@amanhyseneunom4811
Жыл бұрын
Hard worker workin sickly thanks for the good advice
@MrMoss786
2 жыл бұрын
Great video identifying the leaks by looking for traces of rust or dirt stains. Turbo polyseal spreads well and goes quite a bit, no need to lugging around a gallon tin ;)
@FlatRoofDoctor
2 жыл бұрын
you right, but I used a lot of Turbo that day on the rest of the roof. The video only shows a small part
@MrMoss786
2 жыл бұрын
@@FlatRoofDoctor it's good stuff. Too bad it's not available in my country. The closest I could match it was with Sika lastic 560 or Duram 195 here unfortunately.
@jimmysmith9957
Жыл бұрын
For a 30 x 60 metal building that is approximately 38 years old, would you recommend just fixing the leaks or replacing all the roofing screws with the next larger size? Thank you.
@5400bowen
13 күн бұрын
Sand the rust, use metal prep snd galvanizing paint, oversized screws and a dab of sealant on every screw.
@MidwesternYinzer
2 ай бұрын
You just saved me 12k..Thanks!
@susancade2092
3 ай бұрын
I love your very informative video. It is very useful & you give great money saving tips. Thank you!!!❤
@profesoramatematicas1729
2 жыл бұрын
Gracias por compartir su experiencia en este tipo de trabajo.
@FlatRoofDoctor
2 жыл бұрын
mucha gracias amigo. Thats about the spanish I know. Although my wife is Mexican, I am a slow learner
@skyjim777
6 ай бұрын
I love this guy! Thank you!
@misterpogi1352
Жыл бұрын
You know, telling us the stuff you are using to fix the leak would be great. Just take stuff out of a can and you are good to go!
@ashliesheerin9768
Жыл бұрын
It's most likely liquid rubber seal
@tonywilliams6440
5 ай бұрын
Did you not hear him say turbo poly seal. The reinforcing material is like a woven polyester material.
@patrickobrien8851
Жыл бұрын
What about using integrated - "long life" - screws, where the head of the screw is one piece with the "washer" that acts as an umbrella to cover the neoprene washer underneath: is there an advantage to these integrated screws? The disadvantage is the cost, as they appear to cost more than the standard roofing screw. I'd be interested to hear your recommendation. Great video content, as usual.
@stephenhopkins9541
Ай бұрын
Helpful video
@freiherrvonstein
Жыл бұрын
I like what you are doing. I have had some BS contractors out. My dad put aluminum roofing instead of Tin and 40 yrs later it is fantastic except for…. The nails worked loose and I need to seal those holes. I hope this product works on aluminum. Thanks
@Rondel0927
Жыл бұрын
What paint you sir to seal the leak and the paper you also put with the paint?
@ulkairvillan3219
2 жыл бұрын
Thankyou for teaching us doctor
@frankn.7741
Жыл бұрын
What's the name of those materials he used?? The paste and the paper tape?? Thanks
@matthewlblair
Жыл бұрын
What size screws do you recommend for replacing the rusted smaller screws? Thanks for this video and information.
@williampier3250
11 ай бұрын
Bigger than the one you pulled out generally if you pull out a 1/4 screw put a 5/16 back because it will bite
@indysjumparound9743
2 жыл бұрын
Thank you! I like this guy!! Haha
@FlatRoofDoctor
2 жыл бұрын
You're welcome!
@5400bowen
13 күн бұрын
Sand the rust, use metal prep and galvanizing paint, then a dab of sealant..and oversized screws.
@Tattooclownfish71
4 ай бұрын
I have a angle grinder what size wire brush should I use to rip off the tar some morons that owned the mobile home before I bought as is ouch they nailed metal sheet they tar over the edges I was looking super close on the ladder which I hate going up I pushed with my finger water came out so water was getting under the metal sheet I ripped it off and holy under water 💧 so mad 😡 this guy is a master thumbs up
@kokopelli314
9 ай бұрын
Some of those sheets are on backwards. You can tell by the way they're not sealing up along the edges. Also they put a lot of screws in the wrong places. The Turbo polyseal and fleece is new to me.
@proskimconstruction4720
4 ай бұрын
I would've replaced the roofsheet at once and use 26mm bond washers on the hex screws, I also never use pap en lap membrane. I would have used uni-flash to seal all of those areas if not replaced the roofsheet.
@sweetautumn69
3 ай бұрын
Whats the liquid that you used?
@paulf2529
2 жыл бұрын
I wish you would make a tidier job of painting the turbo seal, straight lines not untidy splodges. You may well be fixing the leaks but the fixes look untidy. For your screw head repairs a template of cardboard would enable all your repairs to be neat and regularly sized.
@FlatRoofDoctor
2 жыл бұрын
Thanks Mr Clean. If I did that all the time, the job would take much longer to get done. I agree for the video I should do that, but the I am not genuine. I want people to see how to get it done without a lot of fuss.
@Bandits_68
Жыл бұрын
Who's getting up on the roof everyday to see the paint strokes are tidy!! Get a life Sadie (the cleaning lady).
@paulf2529
Жыл бұрын
@glen1792 It would utterly infuriate me, I like things done in a neat and orderly way.
@barryalesiaackerman1433
9 ай бұрын
@@FlatRoofDoctor i love you doc 😂😂 your funny would love to learn from you honestly.
@5400bowen
13 күн бұрын
What about the leaks that will develop over the next few years? More work for him? Coat the whole roof and be done for at least 5 years.
@emilywelsh1072
6 ай бұрын
Thank you, this was so helpful!
@jjf609
3 ай бұрын
Do you think a standing seam metal roof is worth the cost? Also if I'm 1.2 miles from the ocean, do I need to use aluminum material if I install metal?
@stevendugandzic4347
9 ай бұрын
Great information ❤
@Tattooclownfish71
4 ай бұрын
Your the best my friend my flat metal roof has tar the previous owners used I got leaks still driving me crazy I wanna scream question should I grind off the tar spots they covered the roof with and do what your doing and it will seal my roof for a very long time ? Please help thank you love your channel my friend Massachusetts area
@박희진-g3e
Ай бұрын
Please let me know what the name of the paint he used to prevent stain is?😅
@SkySim
5 ай бұрын
Wish I could get this product in Canada.
@timo57890
Жыл бұрын
I love your videos thank you they are supse helpful!!!
@JuanRodriguez-qr3yq
Ай бұрын
Thank you
@tubetube2070
3 ай бұрын
What paint is he using
@cadeb5609
2 жыл бұрын
Love your videos. Can you link those seals you used in the description
@FlatRoofDoctor
2 жыл бұрын
Yes I will do so, thanks
@louiseblack3337
Жыл бұрын
What is that brown stuff ur using? Also will this method work on a van roof? Thank you
@FlatRoofDoctor
Жыл бұрын
turbo poly seal, you can get it online here: bergstromm.com/
@dougmoore1666
2 ай бұрын
Where to find the Turbo poly seal around northern Virginia?
@anthonytodd5308
2 жыл бұрын
1. You NEVER cover a hex headed screw with fabric, this creates bridging (an air pocket and/or fish mouths) around the fastener...You must cut the cloth at the fastener for proper waterproofing! 2. You always remove old caulking and tar...NEVER cover AND ALWAYS clean the surface area! 3. Is Turbo Poly Seal a Rust Inhibitor? 4. Always a bigger diameter screw, BINGO CORRECT! 5. FOLKS, always clean the surface area a minimum of 6" beyond the repairing area. 6. The aluminum coating will crack with in 3-5 years!
@FlatRoofDoctor
2 жыл бұрын
You are right in what you said. I am an idiot. Thanks for the comment
@Kains_whored
2 жыл бұрын
I hope he makes an update version ,I kinda understand your comment .but I'm a bit of a visual learner (aka I'm kinda stupid when it comes to this
@itsmedante.5325
Жыл бұрын
so are you saying there's no point in using aluminum coating??
@anthonytodd5308
Жыл бұрын
@@itsmedante.5325 Aluminum coatings have a place, but not in this application. Aluminum coatings have no expansion/contractions properties.
@karinasolis2652
Жыл бұрын
I am renovating an old trailer with a metal roof. I am using a wire brush to clean the roof to bare metal then I will do as you say. Question: what if I can’t get to the hard to reach caulking? Can I just caulk over what I can? Must I remove all rust with the wire brush before repairing? Thank you
@davidlambert7937
Жыл бұрын
Im wanting to fleece the entire roof is this advisable
@robertdillon3171
11 ай бұрын
Will the turbo poly seal and fleece work on metal roofs in south Florida, where the temperature of roofs get extremely hot?
@ShAdOwM0ZES
2 ай бұрын
What’s the white paper called?
@larryfisher4290
3 ай бұрын
i can fix those leaks. how about the hard leaks.i have a bath vent that had to be installed right on top of two ridges ,one on each side .it leaks no matter what i put on it. can u fix that?!!!!!!
@kitwarjri7086
Ай бұрын
Wat is that coating that u apply.
@MarkDonat
3 ай бұрын
What does the fleece do?
@mohamadmaaloof6830
2 жыл бұрын
Excellent job
@FlatRoofDoctor
2 жыл бұрын
Thank you! Cheers!
@josearana7704
Жыл бұрын
When u say bigger screw do u mean thicker or longer screw???
@Lilfabo124
2 жыл бұрын
Great vid , Can u join the sheets the wrong way I think that’s my problem
@FlatRoofDoctor
2 жыл бұрын
Hard to tell
@joemomma1285
Жыл бұрын
Gracias God bless you 🙏🙏
@heathersullivan8833
Жыл бұрын
What is the paper you are using?
@mikerahman1
10 ай бұрын
toilet papers
@justhim8745
2 жыл бұрын
just subscribed to ur channel. what products r u using for repairs
@ejhggffdx
Жыл бұрын
hello sir what kind of sealant paint did you use? and the silver paint?
@tyeemagurl5792
9 ай бұрын
What did you put Dab of?
@bruce9648
Жыл бұрын
Hello sir, I just watched your video I learned alot am I'm fixing to order some ( they are out of black) .. oh well, my question how long is the silicone good for( in the bucket) once you open it how long can it be stored & still be a good product to use 🇺🇲🦅🌍⚓ USMC
@CarlosLopez-jj1hk
Жыл бұрын
Hi good video Whats the name the material's for dude. Hola como se llama el material con que pintas la liking se puede comprar en home depot como se llama el material Gracias buen Video hracias por su respuesta.
@bossluck3339
2 жыл бұрын
Great Video Thanks a million...
@FlatRoofDoctor
2 жыл бұрын
You're welcome!
@xxNewAgeMusicxx
9 ай бұрын
whats the brown liquid called
@pdokoonline
Жыл бұрын
Where to find and buy this?
@mattheweburns
Жыл бұрын
What are you using to fix the leak?g
@stevey7059
2 жыл бұрын
What sealant is that and what's that plastic sheet you put in between the 2 coats of sealant?
Can you give the local distributor address of this product at Bangladesh. Or is it available at Global Market?
@FlatRoofDoctor
2 жыл бұрын
sorry, it is not
@CivilEngineerBD
2 жыл бұрын
Where can we find this paint of turbo poly seal and UV Coating?
@FlatRoofDoctor
2 жыл бұрын
sorry, only i the USA. not exporting for now
@justhim8745
2 жыл бұрын
I have lots of questions
@kitwarjri7086
Ай бұрын
Atleast u should mentioned the materials used to fix the roofs cz i see many r interested in it.
@davidlambert7937
Жыл бұрын
Where do you get the fleece
@Kelliwallace-cr7mx
Жыл бұрын
Just looked it up ourselves , TURBO POLY SEAL & TURBO POLY FLEECE
@letsgobrandon6281
Жыл бұрын
How about telling us what you used
@jennygriesbaum068
Жыл бұрын
What about on a pitched tin roof with staples (2000 mobile home) ? Also what are all the products you are using? My entire roof is rusted, it has never been coated and it only just started having 2 small leaks.
@mariem7250
2 жыл бұрын
What is the coating and white tape you are using?
@timothybarron246
Жыл бұрын
What's the name of white paper
@treydogg77
2 жыл бұрын
Who is these cats trying to tell you what to do on here? Looks over purpose, those idiots don’t understand your wasting time, and material trying to make it look good..... I highly recommend trying Polyseal 2500, 4” wide 3/4 nap roller. Dipband roll coat screws laps, etc! 😉
@FlatRoofDoctor
2 жыл бұрын
These "cats" try to help others, not like "some" that have so much pride in whom they are, that they like to talk bad about everyone else
@Qualityfixroofing-ul2ml
Жыл бұрын
20 years for bitumen Waterproofing over endlaps... Screws in pan instead of rib.. Too much errors
@phenix_Ace
Жыл бұрын
Is it toilet paper?
@wendyfromtheblock6743
6 ай бұрын
👍🏾👍🏾
@airairamas4939
2 жыл бұрын
What is the black liquid you are applying is it bitcherman
@darrincoy9361
Жыл бұрын
Just power wash it and coat it with a GAF coating system. This roof is toast….
@cliffbradford4679
10 ай бұрын
Scissors to cut toilet paper lol
@lottaoswalt5442
6 ай бұрын
That's a fiber mesh
@cliffbradford4679
6 ай бұрын
@@lottaoswalt5442 haha my bad I honestly thought it was toilet paper
@troydeanwalker1405
Жыл бұрын
Didn't say what he used as a sealer.
@susancade2092
3 ай бұрын
He sounds exactly just like my ex-husband while working on a project!!! 😅
@katbosh7748
Ай бұрын
Is that toilet paper?
@Me-th3gj
Жыл бұрын
Did he use toilet paper as a mesh?
@Qualityfixroofing-ul2ml
Жыл бұрын
Membrane
@mikerahman1
10 ай бұрын
looks like
@burnside9
3 ай бұрын
When making instructional videos best to assume audience knows very little. Explain to them like they are 5 years old. You start by saying don’t coat your roof. Coat with what? Presumably tar but you don’t say that. How about you come and fix my roof and I’ll teach you how to communicate properly
Пікірлер: 141