Assalaamu'alaikum.
May you all be in good health.
Back again on the Alkandary channel ..
This time I will share with you how we look for the Lock / Unlock signal from the central lock of our car and its negative triggers.
In general, the lock / unlock output cable is usually positive. It is marked when we test using a DC Tespen then we lock / unlock it via a manual switch located on the door trim, the Tespen light will give a signal in the form of a light on the Tespen.
In this video, besides I share about how to find the lock / unlock cable, I will also provide info on how to find and determine the trigger cable for installing the start stop engine. If the output cable is positive when we use the DC Tespen, it means that the trigger is negative. Vice versa.
In some cases that I saw in several KZitem posts and workshop friends, mostly when the lock / unlock connection from positive central was changed the output was changed to negative using 2 5-foot relays, 1 for Lock and 1 for Unlock. So that the positive output which has been converted to negative can be directly connected to the negative cable of the Start Stop Engine module. If this is the case, then we automatically have to cut the original lock / unlock cable from the car to be connected to the 5 foot relay.
In this video, I will show you how we can change the positive output lock / car unlock to negative without requiring a relay or cutting the original factory default wire. that is, by looking for the trigger cable, which is a negative trigger output so that we can directly connect to the Start Stop Engine module.
How to? Please watch until the end of this video and don't miss a minute if you want to understand how to find and determine the negative trigger output cable ...
Help support this channel so that you can continue to be enthusiastic about sharing information and other tutorials about automotive modification. And of course, if you SUBSCRIBE and LIKE and activate the notification bell, then you won't miss the full tutorial on how to install it. OK !!!
Please LIKE - SUBSCRIBE - Share and Comments.
======================================
Негізгі бет How to Find/Determine the Lock/Unlock & Negative Trigger Cables for Installing the Engine Start Stop
Пікірлер: 289