How to find out and check the left and right front and rear turn signal cable lines.
The steps we have to take are as follows:
1. Make sure the battery current is there after the on contact is black, before entering the penny pocket.
2. make sure the output of the penny is flashing and indicates the pleser is still good and make sure it goes straight into the cent switch socket with a voxy or dark blue color cable.
3. Check the output from the front or rear left-hand direction switch with the orange wire color.
4. Check the output from the right front or rear right switch with the light blue wire color.
5. Make sure every turn signal has a mass path or ground, and make sure it is attached to the body or motor frame.
Thank you very much to all #SUBSCRIBER# and viewers wherever you are, hopefully the knowledge is useful.
Please #SUBSCRIBE#
@IBOT MOTOR CHANNEL .
If you have any questions, please write in the comments column.
Thank you very much.
Негізгі бет Автокөліктер мен көлік құралдары How to find out and check the cable path for the right left, right and left, front and rearbeatvario
Пікірлер: 98