GET INVOLVED in the Ale Army. Weekly live streams + Whatsapp group (for behind the scenes members) *JOIN THE Alearmy Exclusive weekly live videos on Thursday* kzitem.infojoin 🛍 *AMAZON TOOL STORE* www.amazon.co.uk/shop/plumberparts 📸 *VLOG CHANNEL* kzitem.info
@darrenmackenzie1892
Жыл бұрын
I love how your tile line in floor is inlibe to you bath panel. Perfect job
@joeb1642
2 жыл бұрын
I used powerful neodymium magnets on a wooden bath panel 5 or so years ago. Still holding strong and looks much better then screws with caps on :D keep up the good work
@plumberparts
2 жыл бұрын
Too stuff mate!
@HarryFenton6124
Жыл бұрын
Having watched some of your videos I have just successfully taken out an old shower and tray and replaced it with a new bath and shower. The waste pipe was the dodgy bit, I came home from the bricomarche (France) with a huge bag of plastic bits and a can of solvent cement. All new to me. It was much easier than I thought it would be, and I had to do it, there aren`t any plumbers round here. Many thanks.
@keitho77
2 жыл бұрын
I love forward planning and future proofing for easy access for maintenance / repairs. Nice work James!!
@philiprussell3338
2 жыл бұрын
Great workmanship, love the use of the magnets.👍👍
@raysmith2940
9 ай бұрын
love the magnets idea. many thanks.
@richardmartin1961
2 жыл бұрын
Thanks for all the vids. Fitting my ensuite next week. Wish me luck
@shafter164
11 ай бұрын
Hi mate. I'm just refurbing my bathroom (a quick job) and removed the old wooden/laminate panel. It had a little lip at the top where the panel lip would fit into the groove under the bath. What I don't get anout your method is that you've not added any silicone at the top of the panel (where the plastic clips are). Wouldn't that mean water could get through this area via capillary action. Thanks very much for the inspiration btw...
@nickcollins7568
2 жыл бұрын
Magnets. A great idea. Far more attractive without visible screws
@deckingking
2 жыл бұрын
Great video James, lovely and easy to understand 👍🏻🍻
@MrDbone75
2 жыл бұрын
A very good Sunday morning to you all from Wellington Somerset
@nivenwoodfine1928
2 жыл бұрын
Love that magnet idea dude,I’ve been using Velcro pads for years,done a wooden yesterday in fact finishing off the bathroom I was doing but going to give that a go next time 👊🏻
@drc6940
2 жыл бұрын
What about adding a bit of polythene around the battons where they run on the ground to prevent any potential water ingress from rotting them over the years? Use a stabler to pin up four side of the polythene.
@waynesimpson2074
4 ай бұрын
Yup, can't believe he didn't seal off the bottom edge of the panel for the exact same reason, untreated softwood plus water =rot.
@neiltitmus9744
3 ай бұрын
Put a bead of silicon behind the panel to act like a dam
@MarcusT86
2 жыл бұрын
Great vid buddy. One question though so I’m not going mental… did you mean parallel, not perpendicular?
@deancbk3910
2 ай бұрын
Easiest way to cut bath panel is an angle grinder with a tile disc cuts through like warm butter. You dont need no wood supports. No jagged edges. 1 mins and your done. Try it next time.
@LocostR1
2 жыл бұрын
Awesome timing, I'm currently in the middle of a DIY en-suite refurb and will be fitting a J bath exactly like this one in the next couple of weeks
@ahmedashirov1927
4 ай бұрын
Thanks
@HammerBlow500
2 жыл бұрын
Great video! Do you have a link for the magnets used in this?
@ashvanbro9329
2 жыл бұрын
Amazing work James have a great weekend mate 👍🙏
@minualunel9629
2 жыл бұрын
I'm about to fit mine with magnets but in a completely different way. I've bought a kitchen door panel that fits perfectly and some round magnets that fit in the door's hinge holes. And it will all stick to the metallic frame I've built under the bath. Under the panel I have about 10mm gap, so I'll add some small feet to keep it from sliding down.
@adamstockton67
2 жыл бұрын
Where is the rest of this series? Did you finish it?
@rednissan001
9 ай бұрын
Do you seal round the bottom of the bath as well? You didn’t show that in the video but said you would be doing some more later on?
@adamsjoinery
2 жыл бұрын
Never been a fan of plastic bath panels but I guess with a curved bath you don't have much choice. I've never bothered with the provided clips either, just use silicone. Not much point in those magnets if you're just going to silicone it in place anyway.
@donald840
2 жыл бұрын
Can't see the magnets on your store, can you pop a link up?
@graceineverything9064
2 жыл бұрын
But James, spiders will come out under the bottom 😫. I’m just a home owner trying to avoid a heart attack 😆
@morf76
2 жыл бұрын
that big old gap at the bottom. I wouldn't stand it knowing how wet my floor gets every bath. Sealed pannel or no pannel at all. not bad but not perfect either
@leytsdavies121
2 жыл бұрын
Brilliant work ill remember this 👍 it may take abit longer this way but its done right
@BarryPaffey
2 жыл бұрын
Nice job James.
@mikeharper1102
2 жыл бұрын
Have you tried an angle grinder with a tile cutter or metal disk? Quick and clean 😀
@davidgreenhalgh3946
2 жыл бұрын
You are the Don!
@DrainMedic
2 жыл бұрын
Great video you got that all in 16 min 💪 Wish i had your editing skills. Maybe a video
@snifflingsmithster-d2240
2 жыл бұрын
Great video James, hope your well mate 👍🏼👍🏼
@oldcodgerplaysgames9610
11 ай бұрын
How does the bottom lip get under those cemented blocks.
@Zeus_1983
2 жыл бұрын
Can you reccomend a good quality but not ridiculously priced concealed shower kit?
@nosferatu8293
Жыл бұрын
Great Video James and nice trick with the magnets. My Father in Law has asked me to watch this video because he's wants me to put a panel on his bath. I think I'm screwed !
@kevinholbrook7174
Жыл бұрын
Hey what type of laser did you use for lining up?
@philipcattell6558
2 жыл бұрын
Great video! Bathroom looking great but please can you remove the label from the side of the toilet bowl!
@fireblaster9961
2 жыл бұрын
Thing of beauty
@Desbo
Жыл бұрын
Brilliant
@jasonhall924
2 жыл бұрын
As the face of plumber parts you influence a lot of people ,no good wearing gloves to protect your girlie hands but not wear hearing protection or eye protection ,we should all lead by example . Brilliant videos
@garyredfern2542
2 жыл бұрын
Looking good 👍👍👍
@CERELESS
2 жыл бұрын
Are you going to do anymore videos of this series?
@plumberparts
2 жыл бұрын
Yes I am! 😎
@CERELESS
2 жыл бұрын
@@plumberparts Ty x
@RichTallent
Жыл бұрын
@@plumberparts chop chop then
@richierich4175
2 жыл бұрын
What glue did you use to fix the wood onto the tile? Tia
@MrSchizoPL
2 жыл бұрын
Hippo pro 3.
@chiko14june
2 жыл бұрын
I think you mean parallel, rather than perpendicular
@daves4026
2 жыл бұрын
Top dog👍
@plumberparts
2 жыл бұрын
WOOF!
@dianemower7422
Жыл бұрын
Come and do my L shaped panel for me 😅 I’ve already got a massive gap between the top of the panel and floor 🙈
@tonypreece3586
2 жыл бұрын
Where do you get the adjustable corner supports?
@mellowyellow416
Жыл бұрын
Bought this kzitem.infoUgkxVoi3B4CB6Oygq1-vo4OTL1M_M5JkrXif tub to use in a photo shoot and it is so cute. Looks just like a picture and is easy to assemble.
@russrua2937
10 ай бұрын
I'm not finding the adhesives in your store, that you use in the video !!
@juliebrooke6099
7 ай бұрын
Did you run out of tiles to do under the bath? Also get yourself a dustpan and brush so you can sweep up all the rubbish that you left under the bath.
@Akustik
2 жыл бұрын
Why do those wooden battens need to both be screwed and glued? Seems like major overkill. And does the bottom of the bath panel not need sealant?
@nivenwoodfine1928
2 жыл бұрын
Don’t be a mong
@stuntmanwill
2 жыл бұрын
The ones on the wall were screwed, the ones on the floor were glued.
@nivenwoodfine1928
2 жыл бұрын
@@stuntmanwill the wall ones were screwed so he could carry on fitting the panel without it moving.he only put silicone on it as cos why not it’s belt an brace’s. He only siliconed the floor cos he was leaving it over night as he had to wait for the magnet latches to dry on the panel before he could continue,it’s a 2 day process
@nigeld8694
2 жыл бұрын
I was wondering exactly the same about siliconing the bottom of the panel to the floor to stop water leaking from outside onto the floor (eg splashes while you’re in the bath/shower falling into the floor outside of the bath, then running under the panel and under the bath). I was planning to silicon as you describe, however I also wanted to allow a way for water to escape in case something leaks under the bath (e.g. the taps leak or the waste connection for example). I wanted to allow water out of underneath the bath, but not in. I’ve no idea how I could achieve such a solution. Anyone ever achieved this?
@UberAlphaSirus
2 жыл бұрын
Mate just get 2 hardboard panels and bend 'em around. Joint it up with a 25mm nozel on tthe sillicone gun. Honestly, why do bathroom supliers get away with not giving all the the basic bits you need. Bogs have gaping 10mm holes now at stupid angles. Pretty sure you are sposed to use the massive amont of clips they gave you on the bottom aswell.
@sergiofernandez3725
2 жыл бұрын
nice
@CB-zr9fi
4 ай бұрын
Where’s the pipes that are always there ?
@spyseeuk1367
2 жыл бұрын
I wish I could be your 40 year old apprentice we'd have a right bath, I'm mean laugh! "Hold it" is what we use to say to eachother growing up. Your "hold tight" is mighty similar. Laterzzzzzz
@vincenttanner8977
8 ай бұрын
great job james. £500 to fit the bath. £5000 to fit the bath panel. 🤣🤣🤣🤣
@Petertronic
2 жыл бұрын
Those particular magnet catches are weak as p*** whenever I've used them
@hatsan334
2 жыл бұрын
5 Star 🌟🌟🌟🌟🌟
@neiltitmus9744
3 ай бұрын
Velcro
@richardwitherstone7396
2 жыл бұрын
Can't beat a 4" angle grinder with diamond blade for cutting any plastic! Can do it one handed! As long as you've got a steady hand 😊
@embecmom5863
2 жыл бұрын
used to do this with tiling panels so the whole thing look hidden.
@baku1746
2 жыл бұрын
Waaaalah......
@dimitar4y
2 жыл бұрын
With the thumbnail in mind, Be careful, those magnets might electrocute you, they got unlimited power or something :D
@thefreshcocktailcompany
8 ай бұрын
butchered the silicone job lol
@scorpionnetherrealm8937
Жыл бұрын
Mate you a good shame you dont live up in Mcr
@malakaragua702
10 ай бұрын
V. Nice B)
@simonharris7486
2 жыл бұрын
Why not just use Button Fixes? Superb British product
@IanPhilipJohnson
2 жыл бұрын
Type 1 or Type 2 Button Fixes Fire Blaster? TIA
@lordelpus2099
Жыл бұрын
I cannot watch this video. There are ads than content.
@mickobyobrien2650
2 жыл бұрын
Did you leave all that rubbish under the bath🤔
@thespecialist786
16 күн бұрын
This is the way to fit a bath thb panel but this can be a way. Not impressed with these panels always flimsy and woobly.
@rebelwave100
2 жыл бұрын
So much more complicated than it looks
@enquire422
2 жыл бұрын
Why didn't you tile under the bathtub, such shoddy work it amazes me the standard of uk bathrooms compared to European bathrooms.
@rebelwave100
2 жыл бұрын
6:12 what the fuck?
@IrishBoy
2 жыл бұрын
still not perfect that is why you cover it with rug 😁😁😁
@billybob01234567
5 ай бұрын
Not a great finish. Looks pretty cheap
@aljones4719
2 жыл бұрын
You mean parralel noy perpendicular. An error like this throws the rest into doubt.
Пікірлер: 91