I had a plumber who installed a new double spigot trap and well, he basically attached the waste pipe of the washing machine to the trap but it wasn't draining.. and I was like WTF.. until I discovered your video, thank you so much! still can't believe the plumber would have left both traps with these plugs still attached!!
@maxwellgyan3293
3 жыл бұрын
How to learn from plumber
@shazj1842
2 жыл бұрын
So straight forward, exactly what I need. Cheers
@peterbrown5447
Жыл бұрын
When you are moving to a new house, make sure there's no blank plug inside before you connect the washing machine waste hose to it.
@steve1315
3 жыл бұрын
Always find these videos helpful many thanks.
@SidLuther
Жыл бұрын
Such a simple video but exactly what I needed.... Thanks.
@johnpayne6196
2 жыл бұрын
Great. Thanks for this. John
@Red-Balloon-Girl
9 ай бұрын
Thank you for uploading this 🙂
@rabiamahmood
3 жыл бұрын
Thank you for the clear explanation and demonstration. I had been looking for this solution for a long time.
@susanrussell6345
3 жыл бұрын
Excellent 👌 thank you 😊
@johncolman5077
11 ай бұрын
Informative , thanks .
@chrischarles2367
3 жыл бұрын
Perfect, thanks.
@minttea4972
Жыл бұрын
THANK YOU SO MUCH - gotta remove the dishwasher and the outflow is just like this picture - linked to washing machine drain off thingy. Spent the whole day trying to google what the fck to do! THANK YOU AGAIN 😁🥰
@taz2392
2 жыл бұрын
Perfect thank you.
@littlepotteringmodelrailway
Жыл бұрын
Brilliant thanks 👍🙏
@charlottefrost8612
3 жыл бұрын
Thank you :-)
@garryclarke7695
2 жыл бұрын
KZitem perfection. Thanks
@thewatchladder8072
3 жыл бұрын
Your video saved me probably £100 for a call out. Thank you my friend!
@diyshop839
3 жыл бұрын
Your welcome £100 better in your pocket, rather than some else's.
@martinclinton6284
2 жыл бұрын
Brilliant! Thanks for the part number, saved me going into Screwfix and looking like a right numpty asking for 'something that goes in here' 🙂
@rifatrafique515
3 жыл бұрын
Thank you
@violettt1
Жыл бұрын
thank you
@doomyman
9 ай бұрын
brilliant
@hasrashid5433
2 жыл бұрын
Thanks
@MrH-GB
Жыл бұрын
Even I can do that, cheers.
@crystalmaze3646
10 ай бұрын
Mine just popped out when hubby plunged it so hard. But I already had the blue bit in and there was another one that came out full of gunk but can’t think of where that was when mine already had the stopper inside. I’ll just leave it out.
@victoriaouthwaite9964
2 жыл бұрын
How do i fit the trap that youre plugging in this video? I have a sinlge pipe with no nozzel at all i just shove the waste pipe down a really long waste pipe and swap them when i want to use the other appliance. This is annoying so i bought the trap you have there, and need to add the trap seen in The video to it. Thanks.
@diyshop839
2 жыл бұрын
Hi Victoria, Ideally it would be handy to send a photo or video, but I can run through it with you the best I can. On the trap you will have a top nut which will thread on to the basket strainer, then the nut below the top nut you will have an adjustable height. On the u-bend itself there is a swivel adjustable nut. All these nuts are hand tightened. The part which attachs to the waste pipe you need to put the plastic nut on the waste pipe first, then the flat washer followed by the rubber washer, with the chamfered edge facing the trap. With the spigots, make sure you remove the blanking plug and attach it to the trap, then attach your waste pipe to the spigot with a jubilee clip or spring loaded clip. Hope this helps All the best Mustafa
@THECUMBRIANYOKEL
3 жыл бұрын
Daft question. I've never known it to be an issue, but does does it matter which spigot you attach either of your washing machine or dishwasher to?
@diyshop839
3 жыл бұрын
Hi there, No it doesn't matter which side but if a blanking plug is fitted make sure you remove it first. All the best Mustafa
@mollywilliams1947
2 жыл бұрын
Hello my spigots are blocked (I am assuming with a blanking plug) but they are attached to the trap with closed pvc, is there a way to unblock this? I have had a new dishwasher fitted and it won’t drain due to this! Thank you very much!
@diyshop839
2 жыл бұрын
Hi Molly, The best thing to do would be either to send me some photos or a video and then I can pin point you problem. All the best Mustafa
@xdebyx73
2 жыл бұрын
You should extend the video and show how some plumbers fit them wrong. They take the spigot off and put the blanking plug in the pipe instead of the spigot. Then the blue plug gets wedged down in the u bend and you can't get it out!
@diyshop839
2 жыл бұрын
Hi there, It doe's make you wonder, maybe they are hoping for a call out to unblock the sink.
@antoniogalluccio4213
2 жыл бұрын
I always put the plug on the other side of the nozzle and it always worked. Did I always make a mistake?
@diyshop839
2 жыл бұрын
Hi there, That is fine what you have done, it is best practice to blank the spigot that you are not using.
@abdulqader1501
Жыл бұрын
hi. I I undid my sink u bend and pipes to remove blockage. I I put back together now the bit with the blanking plug is leaking. any ideas what is wrong. I shall I get a new blanking plug
@diyshop839
Жыл бұрын
Hi there, Sometimes when you remove a trap this can cause problems, however what I would recommend is to undo it and make sure your washers and pipes are clean and then test for leaks, if this still doesn't work I would either buy new washers or a new trap.
@steveross1503
9 ай бұрын
No mention of the sizes, even the plugs don't tell you i have bought three different sizes and none fit. trying to get a 32mm but it is not easy. may repalce the u bend with a new one without a spigot.
@diyshop839
9 ай бұрын
Hi there, Sometimes it can be difficult, however if you look at the trap there should be a stamp/brand label, this will help you identify the the trap and therefore help you find the correct plug. Alternatively you can get a new trap with a spigot and it comes with the blanking plug.
@bexex2382
4 жыл бұрын
dishwadher bigget & washingmachine bigget ? can you spell it for me please because i do not know how to open mine, because it is a closed pvc!🤔
@diyshop839
4 жыл бұрын
Hi This is called a spigot, and you unscrew it anti clockwise. Hope this helps
@saraharabe3639
2 жыл бұрын
Aslamalukom Mostafa ihave problem with this part is leaking soap foam I don’t know what the reason and how to fix this please
@diyshop839
2 жыл бұрын
Hi Sarah, If you can send me some photos or ideally a video then I can assist you with your problem.
@saraharabe3639
2 жыл бұрын
How can I send video?
@diyshop839
2 жыл бұрын
@@saraharabe3639 Hi Sarah, If you take a video of the fault and email me it to me at diyshop72@gmail.com, and I'll try to help. All the best Mustafa
@Vlad_Pa
Жыл бұрын
Listen but this plug doesn’t have holes how water goes out?
@diyshop839
Жыл бұрын
Hi there, The purpose of this plug is to stop any water coming out when your appliance is discharging water. Also if you have a blocked sink, it's a must to plug both spigots to get maximum pressure on the blockage. If you decide to attach a drain hose to the spigot you must remove the blanking plug.
@crystalmaze3646
10 ай бұрын
This you use when your not using that pipe. Obviously it’s to stop water coming out. If your using the pipe then you must take it out to let waste water out.
@siuuu3364
8 ай бұрын
This system does not work, because the dirty water from the sink goes directly to the washing machine.
@diyshop839
8 ай бұрын
Hi there, Unfortunately you haven't understood the purpose of my video, this system works perfectly without any issues. With the water from the sink this goes through the trap and then into the waste water pipe/drain, not the washing machine. I don't know where your getting your information from but it's clearly wrong.
Пікірлер: 52