Awesome channel. I’m a floor layer in New England U.S.A. & this is the best/most helpful flooring channel on yt I’ve come across.
@bespokeflooringsolutionsltd
10 ай бұрын
Thanks for watching our channel. We always try to do the best for our flooring customers..and please share it so we get that 1000 Subscribers too 😀
@DIYBackGarden
Жыл бұрын
Bespoke Flooring Solutions always does a top-quality job ..
@Sam-nt3vv
8 ай бұрын
You are magic
@amziino9898
Жыл бұрын
Great video
@ryanfindlay599
11 ай бұрын
Good to see good work getting done ,alot of cowboys out there claiming to be floor layers ....I've never used pressure sensitive for up the wall but know it can be done ,I've always used f60 ,strong stuff in small spaces ....anyways nice job guys ✌🏻🏴
@Work_andLifeshow
Жыл бұрын
Wunder Full. Wunder Full Wunder Full
@farsiflooring
11 ай бұрын
خیلی زیبا
@edje010vloeren8
6 ай бұрын
Great video! You take of your weld in 2 steps this is good, but you need to let the weld cool down before you cutt the second time. After the second time is of you can hoover above you weld with the heatgun to reduce the white lines on the sides of the seam.
@bespokeflooringsolutionsltd
6 ай бұрын
Thanks ✔️ We do that with smooth vinyl . but didn't film that part . Are you in London?
@edje010vloeren8
6 ай бұрын
@@bespokeflooringsolutionsltd No, i am a floorlayer from the Netherlands 🇳🇱.
@bespokeflooringsolutionsltd
6 ай бұрын
@@edje010vloeren8 Good luck
@НАСТИЛПВХ
Жыл бұрын
installation of PVC coating from Harry Potter :)
@TrashyLobster
6 ай бұрын
I use a scribe tool and set it about 1/16” short of the seam. Use a router to groove the seam then weld.
@bespokeflooringsolutionsltd
6 ай бұрын
Well done 👏 Upload your video, please .so we all can watch it
@teerecks
9 ай бұрын
scribing is better makes the seem strighter when your welding
@teerecks
9 ай бұрын
you also don't have tight seems that can make a issue for yeah
@MostaffaAsghari
8 ай бұрын
Mostaffa @ Bespoke Flooring is so good .his free hand cutting is like scribing 😊.. We Groove the tight butt join ONLY two-thirds through the sheet
@philotis1896
8 ай бұрын
is there an adhesive to glue back vinyl. Mine is peeling away on the vertical cove part Tried diy contact adhesive doesnt stick to the vinyl On vertical surface I cannot apply pressure so need a near instant contact Just a small reapir quantity ? fingers crossed no one seems to know .
Пікірлер: 22