I had the same problem with my 2007 GMC Yukon. I followed you directions and got the hatch open, after that the motor works from the overhead counsol. Thanks for the video. Yours was the best. I had one problem, I attached a string so I could open it manually if the latch didn’t work. Somehow I didn’t have a good exit , therefore it doesn’t work manually. My bad. Once again great video.
@sperez6140
5 жыл бұрын
taxicab1365 You can find his motor very cheap on eBay
I think there is a dimple you can drill out with a 1.5" bit which will allow you to manually release the door so you can take the interior apart easier. They then sell a cover for the dimple hole.
@sperez6140
6 жыл бұрын
Chip LeMont Yes that will work as well
@fernandomontoya4441
5 жыл бұрын
Chip LeMont can confirm I did this exact thing. Haven’t covered the hole yet though. I replaced this motor but it still won’t open. I still have to open glass and reach in and activate the manual unlock.
@fernandomontoya4441
4 жыл бұрын
@warriorpluto nope it is still unable to open with motor. I am told that the new motor has to be calibrated the dealership and I don’t feel like taking to stealership!
@fernandomontoya4441
4 жыл бұрын
Eddie Wright no sir still inoperable, manual opening only. Dealership visit required after new motor installed...
@glennparker4043
5 жыл бұрын
The camera moves around too fast and does not give the viewer sufficient time to see what needs to be done. Hold the camera steady and move it very slowly . The video says "remove this remove that" but the camera does not stay focused on the procedure long enough to show the viewer what the removal procedure is.
@murdiesel
4 жыл бұрын
Awesome and thank you
@sperez6140
4 жыл бұрын
Mur Diesel 👍
@captainhowdy8811
4 жыл бұрын
You see it?
@pathsafety7759
6 жыл бұрын
Do you happen to know which part is called for the driver door. My door won't open in inside latch only outside. I heard a pop and after that it didn't open no more from the inside.
@sperez6140
5 жыл бұрын
Path Safety I totally apologize it’s been so long have you figured out the issue already if not so I can help you
@MrPLC999
2 жыл бұрын
OMG!! No one is making videos like this anymore. You get seasick watching it.
@sonsautomotive
2 жыл бұрын
There is a dimple you drill out and stick a small screw driver in to pop the lock.....
@truthtimetv4575
4 жыл бұрын
i know this is random as hell but can you get to or reach the license plate bulbs through there? My screws stripped out on mine lol im trying whatever before i just drill them out
@sperez6140
4 жыл бұрын
Truth Time Yes , you can drill them out as well
@michaelmcwatters4796
9 ай бұрын
Have you ever taken the whole thing apart? I took my apart and pretty sure fixed it but it's a nightmare to get back together
It’s a 2017 Yukon SLE with a power lift gate, after I washed the vehicle the lift gate doesn’t work properly,I pressed the button it unlocked and i can opened manually
@gillesh.fortin5950
4 жыл бұрын
PS after it dry out it worked normally
@gillesh.fortin5950
4 жыл бұрын
My name is GILLES H. FORTIN. BECAUSE FORTIN FORTIN, IS NOT MY NAME
@gillesh.fortin5950
4 жыл бұрын
I don’t know were you get my name is Gilles H. Fortin thank you.
@sperez6140
4 жыл бұрын
Gilles H. Fortin your liftgate motor went out the part I’ll replace on this truck
@gillesh.fortin5950
4 жыл бұрын
S Perez Thank you very much G.H. Fortin
@bryanhauschild4376
5 жыл бұрын
I couldn’t see the release clip, you were either moving too much or it was off camera.
@sperez6140
5 жыл бұрын
Bryan Hauschild It’s literally right next to your motor on the right side can’t miss it
@sperez6140
5 жыл бұрын
Bryan Hauschild rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F113558079377. Go to picture number five you’ll see the little clip there its round
@bryanhauschild4376
5 жыл бұрын
S Perez hey thanks. Im trying to open it by drilling a hole in the plastic then sticking a small Philips screwdriver in there and release it. In photo 5, which way is that facing in vehicle?
Пікірлер: 46