THANK YOU. I really appreciate you taking your time to teach this. I couldn't find any other good videos. This was perfect!
@Kicknback
2 жыл бұрын
Thanks for the video - all 3 ways were interesting.
@Irrigationplus
2 жыл бұрын
Thank you
@lycaon7888
Жыл бұрын
Thanks for the tips. I especially like the third method as I have to occasionally repair broken irrigation pipes from my well. The pipe extends over 5 acres with about 6 sprinklers - 1 every 200 feet. As it is now, I have to dig up about 4-5 feet on either side of the break so that I can lift both ends to put a coupler on. The 3rd way seems to be a lot easier for me. Thanks
@007yankeesrule
Жыл бұрын
I tried cutting one eith a dremel and ended up cutting the pipe nect to it also. 😢 Goi g to try one of these methods on both pipes. Thank you
@mpopskylar
Жыл бұрын
very good
@rustyhook8698
5 ай бұрын
Thank you for all the options Good job
@israelrodriguez6986
20 сағат бұрын
Super!
@cvega78
2 жыл бұрын
Mind sending me name or where can I purchase that second fitting can't find it anywhere will appreciate it
@tayler2396
Ай бұрын
Nice video! Method 3 looks like the best solution I have seen, but I cannot find any product like yours with long enough flares/bells. Everything I find at Home Depot or Lowes has short flares that would not help at all.
@akshelby33
2 жыл бұрын
Thank you!!!
@nelsonbrum8496
3 ай бұрын
5th video I've watched this morning where there is no deburring or chamfering of the pipes before solvent bonding the patch...
@timhardman4764
Жыл бұрын
Where did you buy that 20" pipe with the long Flared "Bell" end that is 3 or 4 inches long? All the flared "Bell" end pipe I find has a very short flare; not long enough to do the slide effectively like the one you show here. Have you ever tried making a long flared Bell end yourself from a piece of regular pipe using a heat gun? I've seen other KZitems on thermo forming PVC but it's usually for just an inch or two at the end and not 4". I can imagine things getting wiggly and wrinkling when trying to slide a cold pipe inside the heated end if pushing in that far (4") to form a Bell end. Has anyone reading this tried that?
@lynnsarraille7360
Жыл бұрын
Thank-you for showing all the ways to do a repair....one extra could be to give us the name of each repair product. But, good video.
@DensterNY
6 ай бұрын
Thanks for making this video. I have a break that I have to fix and you gave me some more options.
@fpaz3301
Жыл бұрын
Awesome ....didnt know at all . Keep up the great work.
@devash932
Жыл бұрын
Very helpful video. Thanks 🙏
@tsegaia2909
2 ай бұрын
Thank You For vThe Info Brother ❤
@TWash3
4 ай бұрын
What is the pipe that you used to fix it called?
@Ralphie5023
Жыл бұрын
Cat da pipe & da caplin
@cvega78
2 жыл бұрын
Was the second fitting called a " repair slip coupling " ?
@Irrigationplus
2 жыл бұрын
Yes, repair slip coupling is the name. I get them from a place call Ewing irrigation or Home Depot
@tipsunknow
2 жыл бұрын
Good Idea ? but not very concise? It can be shortened and more understandable
@riclmena9395
2 жыл бұрын
And why are you wearing gloves
@riclmena9395
2 жыл бұрын
Why spend more money on that compression fitting when you could just use a full slide coupler and just paid 50 cents
@Irrigationplus
2 жыл бұрын
This are just options for home owners or people with no experience
@jcbm6074
2 жыл бұрын
Still have to buy sand paper and glue
@tayler2396
Ай бұрын
What's a full slide coupler? Is it a coupling without stops? I've never seen those in the big stores, I don't think.
Пікірлер: 30