Saw arrived yesterday kzitem.infoUgkxfQm1wmg0ItKDLavxj1nXtQY9HP7EF504 and today I cut about 3/4 cord of wood with it. Make sure you get an extension chord that is at least 12 gauge wire, minimum. This is my first electric in about 10 years, and things sure have improved. The self-sharpener works great, and it just kept cutting through some pretty decent logs. Wear your eye protection, and ear protection. Excellent saw.
@castorsia
2 жыл бұрын
Lifesaver! I had flooded my brand new chainsaw and with this video I saved myself a visit to the hardware shop.
@PeterisRakuls
11 ай бұрын
Worked!! With first try. Plus i cleaned spark plug with metal brush. 🎉
@douglas1391
3 жыл бұрын
Short, clear and to the point. Excellent synopsis.
@gottabighit1
3 жыл бұрын
Whohhhh, slow down there young feller. Is that how you treat a lady?
@rawhidehat
4 жыл бұрын
Worked like a charm ! And thanks for being so concise. Really appreciated that you don't need to listen to yourself talk for 3 minutes before getting down to business.
@caelanshong3765
3 жыл бұрын
Quick, simple, to the point. Thank you. Too many videos are fluffed out to 8 or 10 minutes and are full of unnecessary comments
@verdadfinal9861
2 жыл бұрын
You are right
@jamessullivan751
4 жыл бұрын
Thanks for the advice! Was struggling all morning getting my MS170 started to clear a downed tree in my driveway. Replaced the air filter, gas, and spark plug to no avail. The technique in this video got me up and running in minutes. Thanks!
@pureonyx5090
4 жыл бұрын
It's 11:30 pm in NYC but I went to my garage had to try it . Put a zip tie to hold the lever down and it came on after 3 pulls . Thanks a million didn't want to make too much noise so I cut it off . Took out the plug and air filter to air out overnight. Will see how it runs tommorow. Thanks a million !!!!
@mcshark13
4 жыл бұрын
Most useful information for a ms170 owner. Just an extra pull or missing the timing on the switch on the choke and the damn thing floods.
@williamgatesman1259
4 жыл бұрын
Thank you, your advice turned frowns into smiles.
@shadetreeprofessor5723
3 жыл бұрын
Started on the FIRST PULL! Amazing. Cleaned the parts (plug, top of the piston, let the air filter air out a bit). Thanks for the education. My dad and I used this method on Father's Day and I think he may have learned something too.
@verdadfinal9861
2 жыл бұрын
It is a great video. Short and straight to the point.
@robertvalades2970
3 жыл бұрын
G'day. Absolutely brilliant. I drove 3 hrs with a hired Stihl chainsaw out from Sydney Australia 1 hr in to cutting up a big eucalyptus tree, I flooded the chainsaw. Your you tube clip worked perfectly!! You are a legend. 💪
@acsouthe
2 ай бұрын
Worked like a charm! Thank you for this straightforward and clear tutorial. Well done!
@extreme469
3 жыл бұрын
Followed your instructions worked perfectly...glad I found you and didn’t waste $$$ taking to the shop...THANKS
@marinam7886
4 жыл бұрын
Thanks this saved me a trip to the hardware store
@efman1313
2 жыл бұрын
Thank you for this. Ive literally started saws 10000+ and i bought a new MS271 and fought to start it for several hours. It constantly flooded. Couldnt get to burp once. I tried drying out the cylinder and plug, like 10 times. I followed this technique exactly. I was skeptical it would burp on idle. But it burped first pull after doing this. It blew out some smoke for a few and is running good now.
@ifs_fishing
2 жыл бұрын
I've been scratching my head for a week on this. Changed spark plug and filter, fuel too. Nothing. This video worked perfectly Farm boss 271
@ProPartsDirectNet
2 жыл бұрын
Great to hear!
@kreatingparadise.
Жыл бұрын
Worked perfectly on my Stihl MS250! Thank you! And I saw on another comment and thought I would reiterate - thank you for being so concise and not making at 13 min video with 10 min of nonsense. Subscribing now!
@andrewboyd2103
5 жыл бұрын
Thank you for posting this video. It really worked! I have a older saw and it floods occasionally, great technique.
@tjlex71
Жыл бұрын
Exactly what I needed! I was really struggling to get my MS 290 started and this worked on the first try!
@HolowatyVlogs
2 жыл бұрын
Excellent advice, every other video just mentions the “burp start” procedure. Nobody ever talks about the spark plug.
@EduardoRodriguez-nh4cc
Жыл бұрын
I have the same chain saw will try it today. Thx for the video brother
@clydehazlewood3592
6 ай бұрын
This video was really helpful when I had no idea what to do
@JamesQMurphy
4 жыл бұрын
Thank you for this! Same thing happened to my MS-271. Thankfully, I didn't have to push the switch down to the choke position to remove the cover, and one round of chain pulls did the trick. But everything else was just like you explained, down to the white smoke at the end. I was back up and running within minutes.
@williamfairley2502
4 ай бұрын
Thanks for the tip it saved my 170 from going to the rubbish dump.
@angeldew77
9 ай бұрын
THANK YOU SO MUCH . I watched 2 other vids on this one with almost 2 million views and it didn't work. ❤
@lorenzo3988able
Ай бұрын
This has GOT to be the easiest video.Easy as in you made it so.....EASY to follow.Thank you for all of us dumbasses.We even forget how.
@Hengsha
Жыл бұрын
Thanks for the video I was able to get my chainsaw running, I had already pulled the spark plug but didn't know to give it a bunch of pulls I was getting frustrated ha!
@burtonkephart6239
4 жыл бұрын
Yea I did this and it worked !! Very good! And yes the key is putting it on the “I “ position !! The choke messes it up
@dilbert1903
4 жыл бұрын
Much appreciated. Saved me from a 40 minute drive and a sore ego
@jimshepherd6828
4 жыл бұрын
Thanks. Had to follow the procedure twice but it worked. The saw had not run for a while.
@amanoos
2 жыл бұрын
This was the trick that worked for me. Saved me from going back to the dealer.
@intergalacticprophylactic
Жыл бұрын
Brand new 2023 271 farm boss. Flooded first two days I had it. Found this video day 3 worked like a CHARM.
@camronsmith4420
4 жыл бұрын
Worked just like you said. First try! Thanks so much. Good explanation.
@CAkinCAkin
3 жыл бұрын
This worked perfectly for my two Stihls within 5 minutes.
@BurnWanOfficial
Жыл бұрын
Man thank you so much!! I almost had a heart attack dealing with mine. This video was fast and simple.
@jimmyinglish2669
4 жыл бұрын
Great video! Thank you so much! God bless you sir
@masonmcdowell
Жыл бұрын
Wow you are a life saver!! Where can I pay you! ❤🥳
@susieq72
Жыл бұрын
Great video mate it worked on my MS170 too a few weeks ago when I happened to flood it for the first time. However ever since it doesnt start like it used to before flooding incident and I end up with a flooded stihl everytime I have used it since.....???? Any reason why this is happening?
@sirgoat-a-lot1691
2 жыл бұрын
This guy nailed it. Thank you!
@crispindry
Жыл бұрын
Works on Stihl concrete saws too. Thanks!
@JS-me5iv
Жыл бұрын
Straight to the point video..Excellent 👍
@noshortselectric5208
Жыл бұрын
Excellent video. Top notch. Thank you
@irmaztamal21
Жыл бұрын
A very helpful video.... Thank you very much
@verdadfinal9861
2 жыл бұрын
Great video. Thank you brother!!
@bigredrocks2521
Жыл бұрын
Bloody legend. This worked instantly. Thanks mate. 👍
@rayprusia4753
Жыл бұрын
Thanks for the advice. I got a new MS271, it started fine. I took a break and went to lunch and I must have flooded it when I tried to restart it. Any how your trick work! Awesome thanks.
@allanwrench
3 жыл бұрын
Perfect video and so concise.
@lawsmachine9833
Жыл бұрын
Exactly what I needed. Thanks
@stihldavebergen3469
3 жыл бұрын
You're a life saver, thanks.
@user-nh3ou3ls9q
Жыл бұрын
Worked like a charm, thanks so mucj.😊😊😊
@louieysursa5996
2 жыл бұрын
Thanks I have that exact saw never hardly used ,always seems I flood it,ill try that.
@TheInsideSnoop
Жыл бұрын
Worked first try. Thanks!
@brianfobianosowski3519
3 жыл бұрын
You saved me man, thank you 🔩
@Handofseeds
3 жыл бұрын
thank you for taking the time to make this. It helped me. I was about to throw the chainsaw across the yard.
@michaelsmith935
11 ай бұрын
This video is a life saver!!!!!
@leeisenberg
5 жыл бұрын
What about the smaller Stihl models like the 14" inch, any ideas/advice for a similar flooding problem? I think the filter is different, haven't got that far yet. - Thanks
@cesar90sp
3 ай бұрын
How do you do this on the 172, since its switch is spring-loaded and doesn't lock in the off position?
@themightycrixus1131
2 жыл бұрын
Great video! Thanks for the help!
@SimpleInformationINC
Жыл бұрын
Totally worked for me, thanks x 2!
@pipeonthemountain
Жыл бұрын
Worked perfect!! Excellent!!
@sidefx996
Жыл бұрын
You are the man, thank you!
@basilallen2100
4 жыл бұрын
Perfect fixed mine thank you brother
@bobeden5027
2 жыл бұрын
clearing pulls with the throttle wide open gives max airflow, hey?
@hangman1128
3 жыл бұрын
Worked 1st pull
@Sienna.N234
Жыл бұрын
Thanks mate that worked straight away cheers
@unatommer
4 ай бұрын
You the man! Thank you!
@palmerstation99
Жыл бұрын
That was great!!! Thanks so much.
@fadilabdulla7491
3 жыл бұрын
amazing
@michaelenglish3348
4 жыл бұрын
So I gotta start on the idle position instead of the choke ?
@erikkrushelnytskyy6124
3 жыл бұрын
If its flooded it probably means it was just recently used and probably has to be on idle/warm start up again instead of cold start/chocke like you would do normally if it was started for the 1st time
@vhulkoti
3 жыл бұрын
It helped me bigtime
@huaethan05
3 жыл бұрын
Amazing
@visionlandscapingllc
2 жыл бұрын
Thank you this worked!!!!
@goldendawn81
2 жыл бұрын
Thanks for the tip😃
@ke6bnl
3 жыл бұрын
Since I do not choke it after I run it, what is causing my stilh 021 to flood after a 15 min break and try a no choke start.?
@allnall3237
Жыл бұрын
You're the best !!
@itsduende7751
Жыл бұрын
Works for me thank you
@juanmunoz8715
Жыл бұрын
Thanks worked for me
@teoaitin3315
Жыл бұрын
Thanks a lot, this saved me $.
@joelpaskauskas8485
2 жыл бұрын
Dumb? Can you start from idle all the time. I can get no satisfaction when doing it the factory way, full choke, partial choke then idle. Thought? Thanks
@1u5t1n
2 жыл бұрын
Just put the chainsaw down and crank it at full throttle with the switch in the run position. Btw, you need to put in a new plug if you took out the old one.
@josephdestefano7377
2 жыл бұрын
AWESOME THANKS SO MUCH !!
@sstanzin2287
3 жыл бұрын
It worked 👍
@MikeJones-rk1un
Жыл бұрын
How can I start my saw left handed. I have right shoulder problems.
@kyleh753
3 күн бұрын
You only need one hand to pull it, the other holds the saw on the ground. So just switch hands.
@alidi4144
Жыл бұрын
Thank you
@betancourtjrz
2 жыл бұрын
Thank you!!
@davidbaez3756
Жыл бұрын
Thanks sir
@creamcheese7845
Жыл бұрын
Fking lifesaver. Thank you very much.
@sonofagalwayman6553
4 жыл бұрын
turn it up side down make sure the spark plug lead is clear and you only have to do it half as much
@Speedslays
Жыл бұрын
Man, anyone noticed on hot days these ms Saws get flooded or something from the gas expansion?
@robertsampson3627
2 жыл бұрын
Wow thanks thought I ruined the saw works on ms 250
@bashdenny1768
8 ай бұрын
The best
@jushimpul4907
2 жыл бұрын
Thanks u sir
@flash1034
4 жыл бұрын
Why the idle position?
@christopherault1898
Жыл бұрын
😊thank you
@levichimeno4414
4 жыл бұрын
Thanks man!
@abena8952
10 ай бұрын
💪🏼👍🏼
@IDVDalot
3 жыл бұрын
Didnt work. Tried it 5 x. Got any ideas
@verdadfinal9861
2 жыл бұрын
Maybe your saw is broken. It worked with me.
@vegar6013
14 күн бұрын
Don't use the choke, give it full throttle by hand and try again
Пікірлер: 115