This doesn’t apply to my Trailblazer. Mine doesn’t look anything like yours when I pop the hood! 😂😂😂
@3Wheels1Block
3 жыл бұрын
I figured you'd appreciate that... can't get away no matter how hard I try...
@jlh505050
4 ай бұрын
Terrific video. Removed all the guesswork. Will save a lot of $$$ by doing it myself. Thanks!
@3Wheels1Block
4 ай бұрын
I'm glad that this came in handy, it is always good to keep money in your pocket 😎
@Kimakaoirgoddess
3 жыл бұрын
Cool job
@bulletcreek7061
2 жыл бұрын
Best videos ever. Thank you!
@3Wheels1Block
2 жыл бұрын
You're welcome, thank you for checking it out.
@musclecarappraisal
3 жыл бұрын
Great Work!
@3Wheels1Block
3 жыл бұрын
Thanks!
@ar-52g-rant67
2 жыл бұрын
My 2015 Yukon driver side LED light is out and it’s got condensation inside of the housing... it also has a fast blinking left turn signal, how do I fix that fast blinking??? I hope to hear back soon, thanks for the videos, very helpful...
@3Wheels1Block
2 жыл бұрын
Sorry to hear about your headlight trouble. Depending on how long your headlight has had moisture in it will determine how bad the damage is. If caught early you can usually dry it out (this will typically be before you have complete failure.) The turn signal amber color and DRL (day time running light) white color are an integrated 'switchback' circuit. White when that vehicle is running and it switches to amber when the turn signal indication is active. If you have no turn signal and no DRL your control board probably has corrosion from extended moisture exposure or the water level got so high that it shorted out the head light control board. You could take the headlight apart and order new internals or purchase a new driver side headlight assembly.
@wlhanley1981
2 жыл бұрын
Was your LED strip shorted out with the condensation? Mine seems to be intermittent. Wondering if it might be resolved when dried out and resealed. Either way I'm going to have to remove the bumper which seems like an unnecessary pain thanks to GM's wisdom.
@3Wheels1Block
2 жыл бұрын
Hey Will, yes the LED light trip was an intermittent issue. I believe it was due to condensation, I have had much better service with the light since I dried it out and re sealed it. I agree that removing the bumper cover to get a headlight assembly out if a big pain, GM seems to love this, most newer cars, my Buick Regal, my CTS I had were the same way. I'm having some other intermittent light issues from that same light housing with the high beam lamp intermittently going on and off, I'm sure it is a loose connection on the internal control board in the light housing., so I will be going through this process again unfortunately. I hope that you are able to resolve your issue.
@gianscibilia1159
3 жыл бұрын
Where can I get the red calipers?
@3Wheels1Block
3 жыл бұрын
They are caliper covers, you can find them ok Amazon. Or you can paint them red, VHT has re caliper paint.
@pfunkmusic5472
23 күн бұрын
So what was the cause?
@3Wheels1Block
23 күн бұрын
Great question, the butyl tape used during production seems to weaken with heat cycles which allows water to enter the housings. Once water enters into the housing the humid conditions make a mess of the electronics. I had a similar issue on my Buick Regal 😕
@pfunkmusic5472
23 күн бұрын
@@3Wheels1Blockthank you. I appreciate the great video.
@3Wheels1Block
23 күн бұрын
@pfunkmusic5472 no problem, thanks for the feedback. 😎
Пікірлер: 19