Thanks for Watching! Find a link to all of my "Must Have", Favorite Tools HERE!! www.amazon.com/shop/chickanic?ref_=cm_sw_r_cp_ud_aipsfshop_aipsfchickanic_9ERPFPBNGQ924P8NS63B
@apolinarponce4506
3 ай бұрын
Where can I get that carb replacement kit
@chrislaws5703
6 ай бұрын
2 years later and this video is still helping people fix their shit. Thank you ma’am!!
@charlesjensen5213
2 жыл бұрын
I was about to toss my 1995 Stihl FS 85 into the scrap heap. It stopped running smoothly, smoked excessively, and was difficult to start. Then I watched your video on string trimmers. I pulled the spark arrester screen out of the muffler and cleaned it per your video. 10 minutes later I have a smooth running machine. Thank you for saving me hundreds of $! Chic
@NuTT62
4 ай бұрын
Thank you so much! I needed new fuel on my Husqvarna trimmer, (mine was all brittle and crumbly). First I went to an online sight and found there are MANY different sizes. So I went to KZitem to get that information, found many channels that told you how to do it but no fuel line specifications, that was until I saw this post, I wish I had found yours first. I should have came here first since I'm a long time subscriber. Thanks!
@zato6226
2 жыл бұрын
Your how to video is more detailed than most of the videos I've found. I'm also glad you included where to find the parts. Well done and thank you
@jeffsomers28
3 жыл бұрын
I have the exact machine for 10 years now without a single problem. When the time comes, I will reference video again to rebuild. nice job explaining!
@lionelcho-young6943
2 жыл бұрын
Thank you for this video. I found this video after my Husqvarna 128LD refused to start. Ended up replacing it but With you concise video, I plan to “tinker” with rebuilding it. For me, having the correct tools makes the job a whole lot easier. I fully endorse your videos & channel/site. A thousand “thanks!”
@johnwayneschaefer8518
11 ай бұрын
Super legit !!!! This is how an instructional video is made !!! Not the typical 20 minute video with 20 seconds of usefulness. Earned a subscribe
@wtmayhew
3 жыл бұрын
Excellent video! I just worked on my Husqvarna 128LD and learned most of what is covered here by trial and (luckily not too much) error. I found gunk had built up in the return line which allowed the engine to start, but die with any application of throttle. I ran a soft copper wire through the ports on the carb and checked the diaphragm, which was OK. Reassembled and started up fine. Other than spark plugs, that was the first maintenance on that engine in eight years. Also, thanks for showing the technique for threading the lines!
@rodneyskinner7741
3 жыл бұрын
Thanks for a new video! Enjoy watching and learning from you! I’m a old Vietnam Veteran. Happy Memorial Day!
@Chickanic
3 жыл бұрын
Thank you so very much for your service!
@theluth9046
3 жыл бұрын
Yes thanks for your service to this great nation,!
@ncautoman57
3 жыл бұрын
Thank you for your service Sir.
@Big_Johns
3 жыл бұрын
Thank you Mr Skinner, we appreciate you sir.
@dale4320
3 ай бұрын
Dale Hi Rodney, from an Army medic, Nam 1966.
@ORflycaster
3 жыл бұрын
Great content and start to a strong growing channel. Most people today can barely put gas in their tools correctly (and buy battery powered instead), but seeing a knowledgeable, experienced woman talking about small engines is like learning calculus from a unicorn! You’re everything that America needs more of. This channel is exactly opposite of The View at EVERY level, and is what people should be watching instead!!! Keep up the great work and I just subbed.
@Chickanic
3 жыл бұрын
Thank you!
@TommyFlanagan666
2 жыл бұрын
Totally agree, Jeep Guy. The View gave my mama a tumor!…and she only watched it the one time, like 11 years prior to being diagnosed! Just shows to go ya how powerful evil them libral womens are. Mama’d be here today if she’d only learnt how to fix pow’r equipment instead. 🥺
@richardstevenson1346
2 жыл бұрын
Thanks so much for this video. I had changed gas lines and filter ( thanks ethanol ) but still would not run without choke. Once I checked the screen I found a 75% blockage. Cleaned and an now works beautifully!
@bmcd9627
Жыл бұрын
Thanks for a great video! I replaced the rotten fuel lines and still it wouldn’t run, then I watched your video and realized I had reversed the lines…duh! Your video saved the day and got my Husqvarna running again. Looking forward to more videos.
@beb1527
3 жыл бұрын
Had the exhaust clogged with carbon deposits 35 years ago on a lawn boy 2 stroke engine. What a great feeling when I was able to fix it myself very similar to the way you did (light hammering on a screw driver for the real tough deposits). This was the first engine fix I ever did. This lesson taught me to mix the gas and oil by precise measuring instead of eyeballing it :).
@somebody655
Жыл бұрын
It costs a little more to have a pre-spooled line, but when you're in the middle of a trimming job kzitem.infoUgkx429xwEjNPnwzQohFrURRyKF51YfOD_Du , it is so nice to just pop out the old one and pop in a new one. Love Black & Decker tools. Especially the 20-volt battery operated ones. And, as usual, it came on time. Thanks Amazon!
@kennethlowe6337
3 жыл бұрын
Found the best way to fix a husqvarna 128ld. Replaced it with a Echo 2320t never ran better.👍🌝
@nicolec7290
4 ай бұрын
That’s not funny
@garyclifton2180
3 жыл бұрын
You make it look so easy
@chris33pa
3 жыл бұрын
It is especially when you have taken small engine classes
@garyclifton2180
3 жыл бұрын
@@chris33pa IV just TUC a cpl mowers on one revs a bit high the other starts first pull but then starts to sound choked up
@stevejette2329
3 жыл бұрын
It is pretty easy if the knowledge is in the head. Without that, crisis.
@curtisgore1611
2 жыл бұрын
It's cool to see chicks working on engines
@markharris4260
Жыл бұрын
Old video I know, but I recently bought a Husqvarna 122 lk weedeater from tractor supply , it was new someone brought it back and said it didn't run right , took a chance on it , it would crank and idle but not Rev much , I tinkered with it adjusted the carb special tool splined screwdriver to adjust jets , it ran good and runs good but acts up and don't wanna crank then it acts like it's starving for fuel then runs great , think I'm going to beat on the exhaust and clean the carb out now ! Great video !
@TheSonsOfSimon
Жыл бұрын
This is the best video for working on the Husq 128LD I’ve seen. Great job! Thanks for the info.
@patwaldrip3774
2 жыл бұрын
Thank You 🙏 for sharing this informative video, I have 128LD also. That would not start in southern Alabama mid morning today, went to town and had to hunt up a spark plug and also picked up a fuel filter also. By the time I got back the heat index was over 100, too hot to be outside. Will work on it tomorrow morning.
@adamschaeffer4057
Жыл бұрын
Thank you so much! I was sitting here throwing my shoulder out trying to pull start this 128 to no avail. Figured I better consult someone who knows what they are doing and presto, found this video. I dumped out the fuel tank and the lines had literally dissolved into mush. Amazing what a little knowledge can do. I'm confident I can get this going now. Liked and Subbed!
@robertgill8833
2 жыл бұрын
These Husqvarna weedeaters are great, even entry level like this one. I have exact model, little adjustments and they'll last for years.
@GI-JOEs
3 жыл бұрын
Thank you for this video. I bought the parts and it worked like a charm. You saved me $200 on me buying a new one.
@Chickanic
3 жыл бұрын
That is awesome! Thanks so much for letting me know!
@jammer_6245
3 жыл бұрын
Tips... tricks & information to repair small engines ...Hell Yeah !!! And on this Memorial Day let us remember & Honor our Fallen Brothers & Sisters..."us" Thank You "us"
@damien381
2 жыл бұрын
I've been all over the Internet, and this is the best video I've found on carb replacement yet! Do you have one on adjusting the mix, and the idle screw?
@TonyQKing
Жыл бұрын
Yeah- Steve's Small Engine Saloon has an excellent video on fine tuning a 2-cycle engine. And adjusting all THREE screws. It's not a Husqvarva (it's a Stihl, I think), but the same principles apply (as he says)
@paulkristiansen9316
Жыл бұрын
I watched your video twice before ordering parts. As I disassembled it I was dumbfounded as it was EXACTLY like the one in your video. Filter fell out, one insert connector fell out. lol rotted fuel line. However I did order the CHEAPEST replacement I could find(11.98). Upon delivery I realized I needed the adjustment tool🤯. So 18.00 all together. It started right up and a few minutes of adjusting I was Happy Happy. Your videos are great. Next time I will follow your expertise implicitly 😊
@Tom_H
2 жыл бұрын
Chickanic. Brava! You made it look simple enough that even a dude could do it. Everything played out exactly like the video -- Including the fuel filter falling out when I drained the tank! The carb filter screen had trash in it and after blowing it out plus a shot of carb cleaner it was back in business. Started on the 2nd or 3rd pull and in no time it was idling with no choke and had snappy throttle response. Thanks! Well done.
@Chickanic
2 жыл бұрын
YAY!
@Tom_H
5 ай бұрын
@@Chickanic One year update: After sitting all winter, (Yes, I did a cleanup before putting away.) started on the 2nd pull. Your advice rocks.
@Krankie_V
2 жыл бұрын
I bought a 128LD new in 2009. The only thing which has ever failed on it was the starter recoil. The spring assist system broke. I drove some screws through the two pieces of the pulley to lock them together, eliminating the spring assist and it's still working well years later.
@wacmac1976
Ай бұрын
first time viewer. A great video, clear and to the point. Much appreciated !!!
@johnbreland5803
2 жыл бұрын
I watched your tutorials, and I really liked them and appreciated the way you showed how to fix the trimmers and blowers I have....You were concise and if I couldn't have fixed my equipment, I would have been , oh well, THANKS for the lessons, I now have a trimmer(128LD), and a blower(125B) that works like a champ, and parts ordered for another trimmer(125L) that I've had for about 18 to 20 yrs. Thanks again..
@baddad5781
3 жыл бұрын
I have a 128ld I purchased mid summer last year and I used it 2 or 3 times and it began to bog down on run and would only run an half choke. I've always use ethanol free gas so the carb has to be dirty. I've just never fixed it yet. Brand new and a headache but we'll get her going. Great video
@alexandercopeland2849
2 жыл бұрын
Sounds more like carb needs adjusted or clogged spark screen, then clogged filter/ carb.
@peerplaut5089
2 жыл бұрын
Thanks for this video! Compression 120 - got spark, fuel filter laying in the bottom of the tank. New kit ordered. Hope to get ‘er runnin’ this weekend! Thanks for all your videos!
@michaelspencer301
3 жыл бұрын
I have used pocket knives, utility knives, diagonal cutter's and razor blades to split fuel lines. But never scissors. Lol. That is AWESOME ! gonna get me a pair. Thanks Chickanic. Love your videos. 👍👍
@richkopf1787
2 жыл бұрын
Great instruction and got my trimmer up and running within 20 minutes after cleaning the carb, filter and replacing fuel lines.
@troybilbrey
2 жыл бұрын
Thanks for letting me know about this video. This will help me get my trimmer back in great running shape. Your videos are simple, straight to the point and very interesting.
@The_Planted_Eye_1
2 жыл бұрын
This video is great. Wish I sawnit before struggling to replace my fuel line. Your approach to feeding the line is sooooo much better lol.
@ssss7300
2 жыл бұрын
Thank you for a very useful video. I was able to repair my Huskvarna weed eater and now it works like new!
@joshuawells251
5 ай бұрын
I did the OEM carb and still had same issue, then i changed from the HIPA plug to a Champion, runs perfect now! The amazon kit plug was non-resistor, the champion is resistor, seems to make the difference.
@baldeagle242
3 жыл бұрын
This video is going to explode! Great explanation and excellent job! Thanks for sharing. 🦅
@Chickanic
3 жыл бұрын
Thank you! That means a lot.
@linwoodwebb4259
3 жыл бұрын
@@Chickanic I need help ajusting the carb on this weedeater
@alexandercopeland2849
2 жыл бұрын
I picked up a old 2011 128C Husqvarna and lucked out on replacing fuel line and threw carb into chem dip. Smelled like 5 year old stale gas. Runs great
@alexandercopeland2849
2 жыл бұрын
Traded it strait across for Husqvarna 125B leaf blower which I had to do same thing to it.
@gigiday6174
2 жыл бұрын
I just found you! So thankful I found a female that does this. I have nothing against the men. I’m a single 63yo. Female. I’m so tired of trying to get weed eaters that will work right. I was given a Husqvarna 128LD. My sister-law passed from Covid in the past Dec. and had all these yard things. I’m grateful but I know nothing about this type of tool. I want to get the things you recommend in your video. But where? I’m on a limited income. I’m trying to be frugal. Thank you for sharing this
@Big_Johns
3 жыл бұрын
Another great video Chickanic, I must say though you are much easier to look at than Taryl, Mustie, DoubleWide, Mower Medic and Steve. Thanks and keep'm coming!! :)
@Chickanic
3 жыл бұрын
Aw thanks!
@christophervickers9685
4 ай бұрын
I'm pretty good with small engines but aint really messed with weed eaters to much and I ai t never changed grommets so I ended up here after my search just watching little repair vids but just wanted to say you explain very well and are super skilled thx for the info
@peterjay1968
3 жыл бұрын
This is the most informative video on the internet on how to fix the Husqvarna 128LD weed wacker, I know because I've watched them all, three months ago, before you posted this video. I had to buy another weed wacker to get my fire abatement done. Now with this video I'll give fixing the Husky another try. Thanks
@Chickanic
3 жыл бұрын
Thank you!
@waynemenzie
Жыл бұрын
Great video and right on point. Have a 128L with the filter bouncing around in the fuel tank. Several inches of Echo 5mm fuel line later and it's running like a champ. Thanks for the awesome video.
@Red_Sky_Farm_2023
Жыл бұрын
This is great! I have a 128L that has no fuel flow and a brand-new 128LX that has no spark. I now know how to fix the 128L, but not sure about the 128LX. I plan on calling the manufacturer on Tuesday about warranty since the LX is less than 2 months old and less than 2 hours of run time.
@darrenlowry7477
2 жыл бұрын
A huge thanks I have one of these I gave my grand father and he called me yesterday saying it wouldn't start. I know where to start and hopefully can fix it myself.
@stellarproductions8888
3 жыл бұрын
It was fun watching you work on this puppy. I love how quiet the new Husqvarna engines run, even for 2-cycle. I own a Stihl FS250R which is a monster of a brushcutter, and no longer made, another example of EPA overreach. And while it is an amazing machine, its a little much for an around the house trimmer, far too much weight, noisy, and of course emissions. If somebody lets their yard get 2-feet tall though, you'll need it to tame the yard lol. I also own a Honda 4-cycle 35cc trimmer, which is also commercial, about 2-pounds lighter then the Stihl FS250R, but its far quieter, better emissions. I still need to use a harness with it, but they got a home owner grade that is 25cc which you probably won't need it.
@kevinthompson6986
2 жыл бұрын
I have an echo I’m very happy with except for the gunk that gets out on the muffkin side but IDC cause it’s away from me
@alexandercopeland2849
2 жыл бұрын
Love my Stihl KM56 C
@darrellyea6470
3 жыл бұрын
You always explain things in such detail. You're really good at it. Thanks so much.😊👍👍👍
@themowerman
3 жыл бұрын
Yo yo from the 🇬🇧 great video as always
@rojilander7212
Жыл бұрын
Love the straight forward approach and method ...
@carlosmunoz6513
3 жыл бұрын
Thanks you are a good mechanic and a very good teacher
@benwood04
3 жыл бұрын
I came across this video after I replaced the carb. I used the Hipa or whatever it is on Amazon. It idles just fine, starts like a charm, but it will not rev up to actually work. I ordered the OEM after seeing your link and opinion. Thanks!
@knightimusprime25
3 жыл бұрын
adjust the high screw on it ya have to turn it very slowly as those carbs are sensitive if ya do that you'll find that sweet spot
@henrymurawskibigdogrepair
3 жыл бұрын
It’s a purge bulb no longer a primer bulb but fantastic video you are the gal
@leifvejby8023
3 жыл бұрын
I know that too, but I still call it the primer bulb too. Believe I am too lazy to learn new words - and it is still a primer bulb on the B&S engines.
@brucelancaster7405
2 жыл бұрын
Your videos are easy to follow, you make the jobs look easy, thank you, keep up the good work 👍
@eastonford7855
3 жыл бұрын
Great video Chickanic , I love to watch the videos, when I can tell they are coming from a deep abiding knowlege base. Keep up the good work.
@Chickanic
3 жыл бұрын
Thank you!
@ronhammar1154
Жыл бұрын
I like the way you do your videos! You show or talk about all the stuff the other channel's don't and you know what you are doing! I like your video's and I also watch Donnyboy and Mustie as well and I already know how to do all this ! It seems to me that someone finally is able to get one working and then they think they are experts and they are of no help to the rookies but the rookies dont know that they dont know what they are doing and talk about the thing a ma bob or the flopper part because they really dont know what they are! We will give you a 9.9 !
@mfbolger
2 жыл бұрын
Great video I wish I saw it prior to doing the replacement the fuel lines were hard to feed into the tank your tip would have saved me a lot of time installing them
@alexandercopeland2849
2 жыл бұрын
Not many of us small engine mechanic like to share that tip.
@chuckgehring376
2 жыл бұрын
Thanks, Love your Channel. I bought a brand new Husquvarna 128LD. It can find for a few months then starting having problems. I went to check the Air Filter, and there was no Air Filter installed. Checked the Fuel Filter and surprise, no Fuel Filter installed. I am not sure if it came from.the Factory In that condition of if it was assembled at Lowes, but either way I was very disappointed that the filters were not installed. Thanks again
@woodrow6611
2 жыл бұрын
Thanks for your help. Gonna use your video to help me do the same thing to my 128LD.
@VTKingdomsawing
3 жыл бұрын
Excellent work. This will be very helpful to people. I guess the only thing I do different is a good bit of cleaning when everything is apart.
@ronzek3207
3 жыл бұрын
I agree but it is for my own personal use, not for getting it fixed and back in the customers hands.
@jacobm3324
Жыл бұрын
This is why I hate going behind someone else's work, the dingle berry before me had the fuel line in the wrong holes lol thank you nicely done
@tommyluck19
5 ай бұрын
My Husqvarna 3 years old. Probably dingle berry put together in the factory. Filter fell off as well. Such a garbage construction. But the biggest dingle berry was the engineer who designed this junk. Thank You for the video!!!❤
@kabbythedog9409
8 ай бұрын
It was -10 this morning so I replaced the carb on my 128 Thanks for the how to
@JasonSmith-qx3zh
3 жыл бұрын
That's some A1 explaining right there thank you !!!
@billbaber6653
6 ай бұрын
Good class I think even a klutz like me could change that out, you explained well.
@lawrencemay8671
Жыл бұрын
I always like to take a rag with a little of my mixed gas/oil and wipe the machine down, cleaning exterior surfaces to lessen the chance of debris getting into the machine. Also I like to rinse out the tank with a little of the same.
@summerwat7846
3 жыл бұрын
It's me, "Fixes Everything Machanical" again. I was so appreciative for this video. I have that exact trimmer & it would run only on choke.. thanks to ur video I just went ahead and replaced the entire carb.. You guess it, I came home & my husband tried to trim the ditch.. Needless to say, so thankful to have found this video... Lol 😂😂 Ya'll from Arkansas, right? Nice we're from La.. Love the Ozarks.. Dream location.... Much love to u and urs. Stay safe and God speed.. tks again...
@Chickanic
3 жыл бұрын
Awesome! Glad I could help! YES! I love Arkansas. You're right, it's a dream location, but shhh! Don't let the others know. LOL!
@sogal4christ
3 жыл бұрын
Hey I’m from Arkansas ozarks
@summerwat7846
3 жыл бұрын
@@sogal4christ I'm jealous.. Absolutely a Dream location.. Hope to there pretty soon myself.. God willing...!!!
@audreythedog
2 жыл бұрын
Excellent. You're good at showing how.
@richardcranium5839
3 жыл бұрын
if you use yellow tygon type line be sure its ethanol rated the early stuff isnt and even today its still available found out the hard way.
@VK2FVAX
3 жыл бұрын
Great video! the more technical details the better. Really enjoying them. 👍
@Chickanic
3 жыл бұрын
Thank you SO much!
@gregmaxfield4405
3 жыл бұрын
I learn so much more with each video. Thanks and keep them coming !!
@Chickanic
3 жыл бұрын
Will do! Thanks for watching!!
@AnthonyFrancisJones
Жыл бұрын
Excellent! Thanks for this. Think I need to look at the magneto on mine as there is not spark either!
@Chickanic
3 жыл бұрын
If you would like to replace the carburetor, here is a link to a Original Equipment Carb. I would highly suggest NOT buying aftermarket. Thanks for watching! www.amazon.com/gp/product/B00QXWP2WK/ref=as_li_qf_asin_il_tl?ie=UTF8&tag=chickanic-20&creative=9325&linkCode=as2&creativeASIN=B00QXWP2WK&linkId=8fd7a5e4477fd19fcb55c5f467281882
@kahuna1247
11 ай бұрын
I had this line trimmer. When it worked, it was awesome. But mostly it didn't work for one reason or another... So I traded it in and bought a Honda and never looked back!!!
@jayrichards3672
2 жыл бұрын
Cutting off the trimmed portion of the return line is not necessary. Keep up the great work
@David-fv7zg
2 жыл бұрын
Fantastic! Exactly what I needed, thank you so much. The OEM is sold out what do you recommend as a replacement? HiPA? Thanks again
@billh-gl2lf
2 ай бұрын
I know this is an older video but I have the same model Husqvarna with the same issue. I had replaced it with a Cordless Ryobi,which has been working great but I’d like to repair the Husqvarna,for a backup.
@stephen83546
Жыл бұрын
The way you did that I know I can do this :) thank you my Sis👊🤘
@torqwrench5901
2 жыл бұрын
Great video! I have a puzzling prob with my Husqvarna 120LD trimmer. From time to time while running it will unexpectedly die. Then restarts and runs again. How long it runs varies a lot. Maybe 5min and maybe 30min. I use only fresh non-ethenol fuel and trimmer gets annual maintenance. Any thoughts ?
@dc4lifetxjw
3 жыл бұрын
New subscriber. Love your video. I have a carb on a yard machine 42 in cut. I believe without looking it is a 420 engine. I need to clean out the carb. Thanks for all the videos. Very helpful. Do you have a video on the yard machine carb I'm talking about. You make it look so easy.
@richardcranium5839
3 жыл бұрын
a trick we found on fuel lines was to use the wire from the manilla parts tags, feed the wire through the tank from the hose hole to the fill opening. attatch the filter to one end. cut the hose other end at a 45 degree angle then across from the bottom pierce the hose with the wire and tie it and pull the hose through from in the tank. very little waste. on hard to reach like some chainsaws its a lifesaver. the view at the end was fantastic. i've heard of air guitar but playin a trimmer...........
@jeffbyam
Жыл бұрын
Your videos are great....good camera work and great commentary. Keep up the good work. I'm a fan!!!
@mattsmith6828
3 ай бұрын
WOW! i followed this video to the letter and now i have a PERFECTLY running 128LD!!! you legitimately saved me over $350!!!! SuBScRiBEd!!!!!!!!!
@kberlinquette
Жыл бұрын
I bought the same weed eater and used it for like 5-10 runs and it won't start now... also bought a Husqvarna push mower and used it 5-10 times and it won't start. I used to cut grass with my grandfather and used his 30 year old LawnBoy... I sure miss old school quality
@prmayner
10 ай бұрын
Best video on this I found, great and thorough explaining. A+++
@jfranl2002
4 ай бұрын
Excellent how-to video. Got my 128ld running like new.
@pjsmfasheri
3 жыл бұрын
Appreciate you doing these videos. Very informative and helpful.
@lastminuteman
2 жыл бұрын
This was a huge help… great video, and detailed explanation 👍
@harryrehm2106
3 жыл бұрын
Congrats on reaching 6K subscribers!
@Chickanic
3 жыл бұрын
Thanks Harry!
@LuizNunes74
2 жыл бұрын
Wow, this took like 5 minutes. They charged me some $85 to fix my blower, and took them a whole week. Now I need to fix my trimmer. There's gunk in the fuel tank and the filter came out (found the trimmer in the trash but looks pretty good besides those issues). Where can I get the fuel lines? Need to replace those too. I suppose I'll have to subscribe to you now.
@MrSrt4dodgeneon
Жыл бұрын
I’ve got a husq 323r, runs well for a bit then bogs down, I loosen gas cap and put back and speeds back up. Before I throw parts wanted others opinions. Clogged cap vent and sorta vapor locking tank is my first thought. But never seen this happen before
@bernhard8540
2 жыл бұрын
I always put a small zip tie around the fuel filter because they have an issue where sometimes it will come out of the hose end because they typically only have one barb to hold the hose :)
@nemmrrc
3 жыл бұрын
Thanks for the great video. How would you fix a Husqvarna trimmer that chokes when squeezing full throttle ?
@Chickanic
3 жыл бұрын
Thanks for watching! You need to go through all these steps. One of them is your problem. Either gas is bad, screen is clogged or diaphragms are wore out.
@BrianSenefelder
Жыл бұрын
Excellent video and advice! Had same problems and now runs fine. Thanks!
@Juzzy520
Жыл бұрын
Thats what i like to see…. Rev it flat out from cold!!!🔥🔥💪💪👍
@mesmythamp84
3 жыл бұрын
Trimming the fuel line so it goes in the hole better was genius🤔. I would have tore that line to pieces trying to get it in that little hole.
@Chickanic
3 жыл бұрын
Thanks! Glad I could help!
@tommymann69
3 жыл бұрын
I had the same problem water in the gas til I put heet in the mix & got a new e3 spark plug
@ronaldnorris2179
Жыл бұрын
I have a question…what is the purpose of the plastic fitting that’s in the fuel supply line in the gas tank of the 128ld? If eliminated will it cause problems?
@scottoakley3206
3 жыл бұрын
Really good stuff. If you have small engines around these steps are required maintenance in time. Either that or into the dumpster!
@amarti7304
2 жыл бұрын
I like the way you analyzed this unit. I have the same one and its giving me the same problem. The ZAMA carb kit you showed is for a Homelite. Will it work for a Husqvarna?
Пікірлер: 486