I used that 25 years ago on my '56 and I'm still good to go.
@giggity6637
3 жыл бұрын
I heard this guy 😌
@heyitzphil9792
3 жыл бұрын
For fucks sake take my money
@Rayden-sr7ez
2 жыл бұрын
I like this comment
@petronilo113
2 жыл бұрын
😲😲😲😲
@patriciadbrady
8 жыл бұрын
Thank you for taking the time to make and share this video. I have an old 1986 Chevy pick up that still runs great, but has a leaky fuel tank. This will definitely help!
@daviserhart7497
2 жыл бұрын
Is it still working? Need it for my 93 prelude
@robertferris543
Жыл бұрын
Ls430 gas tank removal
@heyfaaskar9512
4 жыл бұрын
since you posted 7 yrs ago. I wish you doing good' I'm gonna try to fix my car very clear and easy instructions thank you so much
@jamesmcghee4171
7 жыл бұрын
Very good video. Clear, to the point, easy to follow. I'm going to try fix my tank this weekend. This will help. Thank you!
@chrisEvans608
10 жыл бұрын
Jb weld does work but you gotta tank the tank out and clean the metal so the jb weld has a good clean surface to bond too
@seanwilson9840
3 жыл бұрын
This video saved me hundreds, God bless you.
@integralogic
3 жыл бұрын
Hopefully about 1300 for me.
@jlq4418
3 ай бұрын
same
@hartrose33
9 жыл бұрын
Thank you so much for this video. We where about to go get JB weld to fix the leak. You saved us time and money.
@jean-marclabonte2844
9 жыл бұрын
Way Cool. Another excellent fix. Thanks for posting.
@dlucas527
2 жыл бұрын
I was looking for a fix. Thanks! Definitely going to get some.
@gerlandkent6377
2 жыл бұрын
I, got 2 pin holes on top of my fuel tank BEHIND THE seat on my 1973, FORD F-700 DUMP TRK. thank, you for you're video.🙏
@joseconstante1321
24 күн бұрын
Same thing on mine behind the backseat of my DTS someone screws into the metal of the car thru the gas tank did this work for u I wanna cut a square around the holes and take it out then cover the holes
@caseytbss
2 жыл бұрын
Run your tank to as absolute close to E as you can. Then have the car wherever you are going to work on it and get the rest of fuel out if you can (many methods). Otherwise jack the vehicle up at an angle to where fuel isn’t on the inside touching the leak if that makes sense
@skyrocketgenius
8 жыл бұрын
This stuffs good, even works on gas wet metal. Used on motorcycle tank after the tilt hinge cracked around tank
@justindecker1343
7 жыл бұрын
skyrocketgenius have you had any issues with E85 has I herd it eats up jb weld?... any insight would be great
@roadrunner40
6 жыл бұрын
Justin Decker JB weld is not good. It hardens, cracks and peeps off very easily. I have never understood how it got so popular.
@jlq4418
3 ай бұрын
i have a 1978 Honda hobbit notice the leak today im going to try it out now before buying a new tank
@nywildfire512
3 жыл бұрын
Great stuff thanks man. Get most of the gas out, to reduce the pressure, do the same prep and put a tiny bit just on the crack and rub it in. If there is any evidence of tiny leak still, clean it with alcohol and put another light film. The key is to keep anything in between the metal and the putty. Once you stop the leak then clean with alcohol and light sand it and re-apply a second coat you will be in good shape. Hence this was the second coat because he already repaired it once.
@gentlebehn
9 жыл бұрын
cool, got the same exact problem. thought I had to take the tank off. Great Info.
@Jsmoken
10 жыл бұрын
Nice. Just found the leak under my gas tank today. Def gonna try that. Big thanks
@ricardorickiiluna1669
3 жыл бұрын
I know this comment is 6yrs old but Did it work for your. Vehicle?
@bezerkura6e715
5 жыл бұрын
Fixed one with JB weld about 5 years ago and it's still good.
@muhamadgr3830
2 жыл бұрын
Hello is there a way i can send you a message with photos ? I need to know which JB good for me
@FastestIntegra
11 жыл бұрын
Holding up good. has not leaked.
@jimtomassetti8928
Жыл бұрын
Hi Great vidio. You did a awesome Job of explaining each step. I thank You !
@yusefsaleem
11 жыл бұрын
thankz 4 the advice! I have this problem right now.
@rickreid81
7 жыл бұрын
Good video. Very help full thanks!
@DonStriker1
7 жыл бұрын
Thanks for the post pard!
@2911joanna
10 жыл бұрын
Pretty good instruction video. Thanks I have to fix a chrysler marine 5 gallon . I will give this a try.
@joseribera6800
5 жыл бұрын
How did it work for a gas can
@natashajames7690
9 жыл бұрын
thanks for posting this. I'm giving it a try right now. and it was nice to have a step by step guide.
@sharpgame8634
5 жыл бұрын
You look soooooooooo cute n sexy in your pic cutie pie
@1cleandude
6 жыл бұрын
Looks to me like the JB Weld did work well where you prepped properly. The repair you just completed may be of a new leak!!
@UncleDoug
9 жыл бұрын
Good video and I appreciate the information.....thanks :)
@UncleDoug
9 жыл бұрын
I have since followed the procedure described in the video, and my tank leak problem has been completely resolved. Thanks again !!
@UncleDoug
8 жыл бұрын
I think preparation of the surface is important. I cleaned the area very well with fine sandpaper so the metal was shiny, and jacked the car sideways so the gas level was real low over the crack when I applied the putty. I also used some of the putty to fill a hole in the floorboard. I check it from time to time, and so far....no more leaking and the floorboard hole is still nicely patched.
@UncleDoug
8 жыл бұрын
Follow up: One year has passed and the tank has begun to leak again in the same place. I scraped the epoxy and it peeled off the tank in big chunks, exposing the original tiny hole. I guess I'll either have to remove the tank and get it soldered.....or repeat the epoxy repair every year.
@VroomBroomZoom
8 жыл бұрын
Thank you very much. About to perform this procedure on a motorbike.
@darkroomignite8264
5 жыл бұрын
Please tell me how it went. Having the same issue. 2 tanks and both done with JB Weld.
@petergarvey311
7 жыл бұрын
I dig that Legend back there lol
@xoukilong
9 жыл бұрын
6:09 your wife must looove you
@jimmyport1991able
8 жыл бұрын
now that's funny. lol
@5kcsqt
8 жыл бұрын
lmao
@VroomBroomZoom
8 жыл бұрын
+Xouki Long lol....YEAH BABY! YEAH!
@xoukilong
8 жыл бұрын
+Andrew Kiss (The Review Dude) talking dirty.. "just tap it in.. Holding it down. Hope you are comfortable with that"
@TheGio908
7 жыл бұрын
Xouki Long
@plavins1
9 жыл бұрын
i repair rusted gas tanks with fiberglass putty, works really well, i have a car that i fixed 7 years ago still holding well
@TJ-qz6hr
5 жыл бұрын
TheRealDeal fiberglass body filler works great, put it on even while it’s leaking.
@doomedalready
7 жыл бұрын
Thanks for sharing, I too tried JB epoxy it did not work with gas, I will try your method,
@dharminderdhimankumar922
4 жыл бұрын
Nice work
@edwardnorton2012
6 жыл бұрын
Thanks for the video. I would have used some 2000 grit sandpaper to go over the leak after cleaning the tank. That roughs it up just enough for what ever your using to grab onto. Brass brushes do more harm than good in most cases.
@johnnhoj15
3 жыл бұрын
Shut the f*** up Vineyard!!
@geocachebear2486
8 жыл бұрын
i had a leak on fuel cell at what GM called a "bad weld" where the fuel filler neck/check valve meet. GM is was remiss in honoring the recall. I did have to drop the fuel cell, as big a pain as it is, it did help. i used a product called Versa-Chem Tank Repair Kit.. I allowed 36 hours for the patch too cure, the tank had been drained. I preemptively replaced the fuel pump, after I removed the fuel pump I saw that it was possibly from another vehicle and had been modified. The patch seems to be doing well.
@michaeldean5878
2 жыл бұрын
Great video, I got a gas leak on my dc4 Integra and I’m trying to find where it is cause I know it’s either the filler neck or the tank
@skyrocketgenius
8 жыл бұрын
Solder on seams them put this stuff over it, worked like a charm
@TheJhaley12
6 жыл бұрын
My son had a dodge dart with a small hole in his gas tank, I used JB Weld and it never leaked again.
@TomFrostJr
3 жыл бұрын
I've used PC-7 epoxy on gas leaks a few times and found it to be a very good permanent fix, although, I might try your stuff with the one that I'm about to do.
@johnhosler6636
6 жыл бұрын
I have never had luck patching a crack or gouge with anything but here's a no leak gas tank fix for a screwdriver hole. drop your tank/drain it, drill the hole out the same size as a valve stem, fish the stem through the hole and put the nut on. Re install the tank. heres my advice and warnings . only drill your tank if you are confident the fumes are gone, use an inert gas to purge the tank/ flood with soapy water. Leave the valve core in the stem! as tempting as it is to decore it for quick drains dont rely on the dust cap alone. Valve stems were not designed to be tank repairs/drains. This should only be used temporary and checked regularly. I have seen this fix hold up years. I hope this helps somebody whos a victim of gas theft/road debry so they can get to work till pay day,
@joseconstante1321
24 күн бұрын
So someone screws holes thru the top of the gas tank behind the backseat into the metal of the car into the tank I don't see it leaking outside probably because it's one the top possibly when I drive but I do smell gas time to time especially when I put gas do you think I can cut a square around the holes then cover the holes with the job weld
@kevinjohnson6308
5 жыл бұрын
I used this a couple days ago and yes it does work!
@htatesil4192
4 жыл бұрын
Someone drilled a hole in mines does it patch holes?
@donaldrussell457
3 ай бұрын
It worked for 2 days. How long before it failed?
@isaiahmarcy8736
10 жыл бұрын
comments are great. lol. all of the sudden your the gas tank repair expert!!! hahaha nice video tho. thanks.
@Trapper100
10 жыл бұрын
Scott Joplin was there to help you!Hope it worked.
@beestoe993
4 ай бұрын
Several years ago when 4 wheeling my uncle hit a rock and ruptured his gas tank. I had a tube of this stuff called "Plastic filler for aluminum". We tried it and it stayed sealed for several years. They discontinued making that product, but it can be done.
@aprilwilson3864
10 жыл бұрын
I have never had a gas tank leak before so I am happy to hear that the putty is still holding strong I am going to pick sum up now
@RandomGreatVideos
7 жыл бұрын
thanks man
@Concordeagle
7 жыл бұрын
Good video, but you forgot the most important part? Does it work? This was posted 3 years ago, curious if the bond held and stopped the leak for good?
@brandonjuache9965
3 жыл бұрын
Samer here now about 7 years
@giovanniduran8680
3 жыл бұрын
Same here now about 13yrs ago
@BryanHannaActingReel
2 жыл бұрын
I thought I read somewhere once that if you use vinegar you need to make sure you clean it all off with water or something if you don't it'll continue to eat through the metal?
@toso6535
6 жыл бұрын
Thanks - I'm going to give this a whirl
@tonysolar284
2 жыл бұрын
Would be nice to have an update to see how well it has held over the years.
@FastestIntegra
2 жыл бұрын
Sold the car
@MarkSegree
2 жыл бұрын
@@FastestIntegra how long did you have the car after and did the leak come back during that time? This could potentially save me over $1000 dollars. I was gonna buy jb but saw your video
@Shopwithgroovy
Жыл бұрын
@@FastestIntegra sounds like it held up for you
@maxkady9478
11 ай бұрын
@@FastestIntegraof course you did!
@MrNedsaabdickerson
4 жыл бұрын
JB weld works when you empty the tank remove it open it and seal it from the inside when it is dry.
@stephenmaclaren3464
11 жыл бұрын
is it good to pass inspection like that?
@joelburnett1
10 жыл бұрын
jb weld slow cure is the best epoxy. the jb quickweld sux. but is not designed to apply to an active leak. sandpaper scratches help any epoxy stick. i live in texas and they never look under my car for inspection but if fuel was leaking where u can smell it i would fix it before the vapor kills you.
@skeggjoldgunnr3167
8 жыл бұрын
I did a quick emergency middle of a snow-storm, just hit a deer on the interstate in Indiana punctured and badly leaking gas tank repair - ROADSIDE! How? I smeared a bar of SOAP on it! That was in 1988. That big ugly Chevy suburban still runs, the wife refuses to let it go. Never a drop came out 'since that evil deer's wrinkle crack in the tank was sealed with a bar of shell gas station soap. Took 4 seconds to do the repair.
@DustySquitoNM
9 жыл бұрын
I don't really see what's got everyone all pissed off with the music, but whatever. Seems like a pretty straight forward thing to use. I have yet to find that Magnum putty stuff, but hopefully, other repair kits are similar enough.
@FastestIntegra
9 жыл бұрын
dustysquito Permatex sales the same stuff.
@DustySquitoNM
9 жыл бұрын
I actually wound up buying the permatex stuff, and it sealed my tank right up.
@FastestIntegra
9 жыл бұрын
dustysquito Good deal, works the same and gets the job done!
@SONShineM516
8 жыл бұрын
I was about to use JB Weld... thanks for saving me the frustration!
@lawnfascist4890
6 жыл бұрын
JB Weld works, but the area has to be dry and free of gas. Kind of hard to do that with the tank still in place.
@Cfnaturalfeeling
6 жыл бұрын
he probably just didn't use it correctly, who knows if the gas tank is still dripping.
@blazzing4321
5 жыл бұрын
I’m using JB weld, I’ll let you know if it works
@jessecampbell4580
4 жыл бұрын
@windowpeeper did the JB hold up?
@CrazieSyko
10 жыл бұрын
Does this work with any type of gas tank even aluminum gas tanks?
@Purrete
5 жыл бұрын
Good upload, very instructional many thanks! I have a 2006 Mitsubishi Galant DE 4 Cyl 2.4L car and it's impossible to find a replacement fuel tank for some obscure reason (unless I spit out 400 bucks). The corrosion area is somewhere on the top and it leaks only when the tank is full. If I decide to do the fixing myself how do I handle this patchwork?
@Matt-ko2mu
5 жыл бұрын
I would say : The exact same way the video shows you mate...
@Roger85able
4 жыл бұрын
Thanks
@KEEPINGMUSICLOWKEY
7 жыл бұрын
How has the repair kit held up till now ?
@KevsGuide
10 жыл бұрын
thanks for sharing. you may have gone a bit overboard with the cleaning and scraping cause i would think you only needed to clean right where you were applying the patch (where as you did a lot bigger area hey), but i guess you were being thorough. safer to do too much then too little lol. Also that old putty stuff really bonded well hey? judging by hard it was to remove it.
@brianmott728
8 жыл бұрын
I own 2 chainsaws with a metal fuel tank which leak along the edges where the tank meets the shroud. What should I use to seal those cracks? Can solder be used?
@1981CrueHead
5 жыл бұрын
Will this putty work around a leaky pipe?
@FastestIntegra
11 жыл бұрын
Over night. I filled the gas tank up the next day no leaks.
@chrishaapala7997
3 жыл бұрын
So the JB Weld that says it's especially for gas tanks doesn't work? I am genuinely curious because I have a couple piss holes in the tank of my 91 Chevy Silverado and the guys at advanced auto swear that it works everyday and twice on Sunday.
@donnydavis9840
2 жыл бұрын
@@chrishaapala7997 How did it turn out?
@joeydurocher5450
7 жыл бұрын
Did it hold Mr FastestIntegra?
@mberge1
7 жыл бұрын
How did it work? Did it fix the leak? I am looking at a 1995 Toyota car Tue that the owner says needs a gas tank replacement, maybe I could just fix the leak? Will know more when I look at the car.
@georux6783
7 жыл бұрын
Was that a warbird I heard in the back ground? P-51 perhaps?
@stalinramirez6316
3 күн бұрын
Does it work between plastic and metal? My gas tank has a plastic end where the leak is. Thanks a lot
@HJXEKSD
7 жыл бұрын
could this be used on a bolt that bolts onto a fuel filter that leaks gas?
@mastagee8574
9 жыл бұрын
Sounds goooooood.......
@yanezdro
10 жыл бұрын
Put some on my tank, did hold up for 5 days then it made its way through the same spot. But I did not use vinegar and did not clean it so will attempt a second try. Thanks
@joelburnett1
10 жыл бұрын
a leaky gas tank can trigger an obd2 fault code(engine light) that will stop you from passing even in texas. gas tanks have vapor recovery systems that work with engine vacuum.
@jason127x99
6 жыл бұрын
Well damn! Did it fix it?
@Xpressd_OG
7 ай бұрын
how long did it hold?
@justinmooney5762
9 жыл бұрын
Thanks i was gonna Jb wield it lol good to know it dont work
@moongoddess4761
6 жыл бұрын
I'm having the same issue now!! It's a small leak but, mechanic is gonna drop my tank to see what's going on
@flyingBrian115
5 жыл бұрын
stupid question but why not use an SOS pad or Comet to scrub that off from all the dirt
@prettygirl4800
6 жыл бұрын
I can’t find the product you used?
@rayl7718
3 жыл бұрын
What about the rust from the inside? If I scrub the outside and the tank is rusting from the inside, will this still work?
@Thecody503
3 жыл бұрын
What... The JB weld didn't work?!? Well thank you for making this video
@papi1870
11 жыл бұрын
how long did you leave it drying
@finlefre
4 жыл бұрын
Where can you buy it at?
@mikemcgown6362
2 жыл бұрын
J B Weld makes it's own fast tank repair epoxy. It's called J-B Weld Tank Weld No. 8217.
@m.m1048
6 жыл бұрын
Can i use it for fuel hose filer?
@fonzo2525
6 жыл бұрын
what is the brand name and part number on the product you used please,thx you.
@temperedskin781
5 жыл бұрын
Most don't mention but don't use sand paper to clean off tank, unless completely dry and disconnected, use brass brush like him. Sand paper can cause spark and ignite the works.. so take caution.. 😌
@chelseaizhaky8436
5 жыл бұрын
9168689869
@crazysaint222
8 жыл бұрын
It's strongly advised not to try and use JB weld, or other "non-specialist" two part products, as most of them are exothermic. Some create enough heat to cause ignition. Not to mention the fact (as you found) many won't adhere unless the surface is completely dry/free from oil and fuel, etc.
@davidregan9872
7 жыл бұрын
That's right! I used JB Quick Steel twice, and it FAILED! This will be my third time pulling my tank. I'm looking for the best product to get it done right! The JB just crumbled.
@rolandoq21
7 жыл бұрын
Will this work for a gas line ?
@beflix8140
5 жыл бұрын
Is that a blue s15 in the background..?
@brandonbreaker7390
4 жыл бұрын
where do you buy it at
@Zavarkinas
8 жыл бұрын
what about hi-gear white titan is it works on plastik gast tank?
@Jessgo33-
7 жыл бұрын
How did it hold uP?
@MrMoneybag1988
8 жыл бұрын
my tank is leaking too but how long will thus last ?
@jaqueenlhajones7843
7 жыл бұрын
I have currently have a gas leak right in that area somewhere. one mechanic seemed to identify it .while another didn't identify it..i have some stuff called Steel Stik it's supposed to be the best !! I got it from O reillys..i need it done asap bcuz I'm waiting aloy of money constantly putting gas in the truck and it's just seeping out less than 10 miles.and he said it was a small crack.
@theepickevin2978
7 жыл бұрын
does it work on a plastic tank??
@brandonclark1900
Жыл бұрын
I got a hair line crack on the side looked like someone beat it with a hammer gonna attempt to try this let ya know if it works
@saraholivas68
Жыл бұрын
Were you buy this at. I need fix my car how long did it last for
@KenGFence
10 жыл бұрын
Did it actually work?
@orrinjay6570
7 жыл бұрын
This is a great video. But I am most eager to know if same product and procedure will work on a tiny gas line leak about 2 feet from the gas tank on my car?
@RevelationJohn-bq8hn
6 жыл бұрын
these products may work but not for long, tried several of them. the best one lasted a month. I have a plastic Tank.
@joseconstante1321
24 күн бұрын
Which one worked for you
@Filipinopanda1988
8 жыл бұрын
did you drain the gas tank first? mine is leaking a little faster than yours so im not sure if the gas will mess with the kit.
@vandan1842
7 жыл бұрын
I'm told where it's coming from its near the top then u have to only fill it below that spot. if it's the bottom well it keep leaking
@tracyokorie4620
9 жыл бұрын
Can you please post an update? I really would like to know if this held well
Пікірлер: 376