Misleading terminology, its the turbo upstream pressure sensor. The differential pressure sensor for the DPF is not visible and is behind the engine connected to 2 rubber pipes
@goldeneagle99
2 ай бұрын
List which engine..looks lime turbo diesel going off the rev counter!
@stdavidboy
6 ай бұрын
You can use a bicycle cable on a drill, it takes a bit of time but it can be done and then clear the faults. Job done!
@johnwba0303
5 ай бұрын
Do you have any info reference to stop start system fault battery seems ok and alternator is kicking out 14.7 v so charging ok
@goldeneagle99
2 ай бұрын
Voltqge is one factor...is it a stop start battery fitted?????
@tmautos-surrey-sussex
Жыл бұрын
Well done for giving a go - it’s a very common problem for the rubber pipe to split near the pressure sensor - a car I was working on this had it happen. I cleaned the tip of the pressure sensor and just replaced the rubber pipe - you can take the pressure sensor off and start the car up - and if the pipe is NOT blocked it will blow out Smokey exhaust gasses rev it abit to be sure it’s free of soot . I agree if your not confident take to a good mechanic
@MyJeanf
Жыл бұрын
Great video. I had a system fault which was causing the engine revs to become erratic while driving also causing the car to jerk when accelerating. Just wanted to ask is this what you experienced . Thanks again for the video JF
@soldoesstuff-howtoguide8430
Жыл бұрын
It's not I'm afraid. I just had a warning light and that's it
@אוריתמיר-ז9ג
Жыл бұрын
what qashqai do you have (year&engine)? did you ever got this sorted out? having the same issue on a 1.2, tried diffrent things without success.
@stephenrodway8357
Жыл бұрын
I've just had the same problem, Do you have any idea what caused it?
@bukolaalliowe9164
11 ай бұрын
Did you ever find a solution to this issue? I’m having the same problem.
@TechBoxHD1
11 ай бұрын
Did you manage to find out what it was?
@stualpman2910
3 ай бұрын
Happy for you it was fixed...
@exxel01234
2 жыл бұрын
You could of used a bike brake cable it would of gone around the bends ? As other people have used ? It’s such a shame people who design these engines obviously don’t work on them 😂 good video by the way 👍
@soldoesstuff-howtoguide8430
Жыл бұрын
Thank-you. I tried a bike cable at first but it was too thin to push round the bend after 10cm or so. A clutch cable was but as per the video I shaped it. It does work you just have to be careful.
@jamesyeoman2875
Жыл бұрын
Hi I have this problem but pluged in an OBD and there was no error codes! is that still normal? hope you can help.
@soldoesstuff-howtoguide8430
Жыл бұрын
I think the cheap OBD readers are fairly simple. The one at the garage gave back so much more information. Just because it isn't picking up the fault doesn't mean there is one. They are handy for turning off fault codes once you have repaired the fault yourself though which saves you having to go to a garage to do it
@arfurdaley6399
Жыл бұрын
I had this symbol come up but it went away after 5 mins of driving. In my user manual however it says it’s either front radar obstructed or issue with lane departure warning, traffic sign recognition or toward emergency braking system ? The latter all related to front radar ??
@Tiger25149489
Жыл бұрын
So take it to the garage then lol 😂😂😂
@danmead69
Жыл бұрын
Hi there I have a 2016 qashqai and I tried this. Cleared the tube, smoke blew out and air was coming through again but the warning lights still showing after I put the sensor back on.. any ideas? Really haven’t got the money to take to a garage to pay for it 😅 thanks in advance!
@soldoesstuff-howtoguide8430
Жыл бұрын
Hello, I think you still have to clear the fault. You can Buy cheap fault indicators on amazon. Sounds like you fixed it though.
Пікірлер: 24