You are one smart dude! I’m too old to be working on these remotes, it makes me feel good to see how some people are smart and help others. College degrees don’t teach the simple things in life. Thanks.
@hyancer
7 жыл бұрын
Excellent video. The corded remote for my father's mobility lift chair was about $100 to replace. Watching your video helped me fix it. Thank you.
@JACK-wh6jl
Жыл бұрын
XCLNT ! GOOD-THINKING !! (YOU-SEE HOW THESE COMPANIES RIP -PEOPLE-OFF ); UNBELIEVABLE ! BSTRDS!!! 👍😎😇
@wyattspop
3 жыл бұрын
"Usually" it's dirty contacts on the back of the buttons or the backside of the pcb where the button press touched the contact..and not a cracked solder joint..please try cleaning with alcohol prior to taking a soldering iron to your joints. If you aren't very skilled with a soldering iron , you will very likely heat it a split second too long and it will bleed to the next solder point, and then your device is history...and DEFINITELY don't remove any capacitors/resistors unless you bought a replacement and are highly skilled with an iron. Thanks for the video
@carlosk8103
2 жыл бұрын
It depends what the issue is "IF" it's the remote is completely dead like in video then yes that is most likely the cause... IF some of or most of the buttons don't work then it's probably the contacts like you said.....
@JerGoes
5 жыл бұрын
After trawling through a mountain of waste of time videos this one actually 'fixed' the remote, thanks.
@johnwalker7788
3 жыл бұрын
Thanks for the video Adam. I have just bought a used Hi-Fi, which was working perfectly, but the remote was completely inoperative (one of the batteries had leaked and corroded the terminals) and I thought I'd have to buy a replacement on eBay. I cleaned up the battery terminals and wiped the circuit board with IPA, but this did not make the remote work. I then followed your advice about dabbing each of the solder terminals and it now works perfectly (although I held the soldering iron on the battery terminal joints a bit too long and they fell out, so I had to reattach them. Five minutes work with a soldering iron saved me £16 and the hassle of buying a new unit! Great tip about using a phone camera to test all the buttons by the way; although interestingly my work iPhone camera didn't register the LED, but my old Samsung phone camera did pick it up.
@normandeineko7584
5 ай бұрын
Your video reminded me that a quick resolder of joints can help fix it . For my Problem it was the LED had a broken leg inside the holeit goes through. Thank you Adam.
@HeyFalls
4 жыл бұрын
Thanks for making this video, which helped me to fix my remote control for a brand new Lasko fan I bought with a remote that didn't work on arrival. In my case, pulling out the positive battery terminal springs a little bit, did the trick.
@nandankumar2450
7 жыл бұрын
Thanks a billion Adam.. I tried to fix my old AC remote and it worked like a charm!!! The trick to see the IR light is absolutely fantastic. You saved $$$$$ :)
@angaj
Жыл бұрын
Thanks a ton Adam, considering I was getting power all across the board, I was skeptical at first, but it worked a charm!
@hazza1063
6 жыл бұрын
Cheers, helped me fix my remote after I stood on it 😂
@MrRoundel
6 жыл бұрын
Thanks for the remote-saving video! It's amazing how many things you can fix be re-flowing solder. I should have thought about this the first time I opened the remote, but didn't. Can't fix that. :-/ I had said to my roommate that I wish I could test the IR LED, and along you came. Thanks again. Keep up the good work on such things, so we can. Cheers.
@HammerROC
5 жыл бұрын
Re-soldering 100% worked! Thanks!
@ImConstantlyConfused
5 жыл бұрын
I had 2 remotes go dead after a move and I was able to fix one by doing just as you did and going over the joints with a soldering iron. That worked like a charm, even though I couldn't see anything wrong with the old joints. The other remote had a cracked board and I wasn't able to spend the time to solder on some short jumper wires to bridge the crack. Hopefully, I can get it back up and running in time.
@west_park7993
Жыл бұрын
Particular problem with DirectTV remotes. The bottom black part has 2 layers. Hard plastic, PS or ABS, and soft layer, perhaps PVC with plastifier. This particular external layer makes the remote to stick to any surface and not sliding. And this is what creates the problems. Slowly it emits plastifier fumes that condense on the inside, on the PCB and buttons. Plastifier is insulator, and the conducting rubber does not touch the metal terminals. Take it apart, wash the plastic parts with soap and water, and the PCB with rubbing alcohol. Remove the yakky sticccky residue. How to take apart the remote. Remove the batteries. On the bottom there are two small black screws. Take them out. Flip the top. There is an oval insert at the middle. Remove it gently with a small sharp flat screwdriver. Start around the blue button. Under it you will find 4 more longer screws. Remove them. There are several snap-ons. Thats it. Wash, reassemble.
@steamx
7 ай бұрын
Excellent video, thanks, this solved my dead Philips remote after I dropped it.
@adrian_b_123
3 жыл бұрын
Great video . My remote is missing the big capacitor on the back from the factory (pcb has a place for it but not populated ). Why is this and should I add a capacitor there ?
@insinyurndeso
3 жыл бұрын
some time, the damage material is cystal, the simple way to fix just cleaning the pcb,thanks
@Kohhoonlay
8 жыл бұрын
Koh from Singapore . Thank you much much. After viewing your video I managed to make good my remote control .
@ernilogermino3624
5 жыл бұрын
Many thanks Adam, it worked. I can now enjoy using my dvd player.
@francom6230
3 жыл бұрын
Cold or cracked joints cuz of brittle low quality .. quality matters. I'm really old 59, but you really do know more than I forgot 👍👍👍
@davidmathis7780
8 жыл бұрын
Thanks for this video, I was able to fix my Logitech Harmony 650 with this. It was the battery terminals - a little re-soldering and it worked like new!
@eone2345
2 жыл бұрын
I refreshed my solder jointsand it works again. Thank you 👍
@simonxuan
2 жыл бұрын
Worked for my Sharp TV remote fix. Thanks a lot
@edmund9550
8 жыл бұрын
Thanks man.....it worked....fixed 2 old tv remotes:)
@wess7390
2 жыл бұрын
Thanks for putting that up. I was busy scrubbing the contacts on a remote and wanted to see if there was any solutions I didn't know about. I've noticed that every control I've opened up has oil around the defective button. Likely finger grease. Since I've had a dish DVR for years, I have a donor remote that in extreme cases, I cut out a button to use as a replacement. My surgical skills are not good enough to transplant the carbon button (yet).
@rodrigolumi
4 жыл бұрын
Awesome man! Thank you very much. I dir a check on my control welding connections and I fixed it. I just saved some money.
@jezzag4589
2 жыл бұрын
This is awesome. It saved me $20 on a non genuine remote. Thanks
@U46411f
2 жыл бұрын
Work for me used a solder on soldering points on my remote especially on led contacts and it start emitting IR - works (sherwood RNC - 100 )
@gretchenvega1602
2 жыл бұрын
You hit it brother, worked immediately after no problem. How do you know?
@lizerbeams
Жыл бұрын
This worked for me. Thank you!
@divyabalakrishnan3239
2 жыл бұрын
I tried this for my bpl remote. Now it's working fine 😊
@adamwaters8073
2 жыл бұрын
A great trick with the camera phone thanks dude helped me out a lot :)
@topscore25
4 жыл бұрын
Indeed a remote is so simple that usually its the bad joints to blame. If u cannot spot a crack or a disconnection by looking from the top, just flip the PCB and look at the joints sideways. Thats where u see a lifted joint or a disconnection
@tharan9106
3 жыл бұрын
Thankssss buddyyy!!! I got my remote fixed
@alohamark3025
3 жыл бұрын
In case folks need a tool for opening a remote, there are numerous spudger tools on Amazon. I would get all three types, metal, plastic and carbon fiber. OEM remotes are so expensive that you're almost forced to get them over the cheapo universal remotes, if you can't fix the original. Also, if you plan to do soldering, get a grounded, low/medium heat iron and work quickly.
@MsMuddled
5 жыл бұрын
Thanks AdamDIY
@ArunKumar-lz5el
8 жыл бұрын
Thanks a lot, its very useful to get a good name in my family. because the one n only entertainment is the tv fr my mom. thanks a lot again
@marioorange
9 жыл бұрын
hi from greece one more test that your led is working beside the i-phone it is ......THE RADIO just put radio in to a frequency and test the remote control ...then you ll hear a sound if it is working !!! if not... then it has problem!
@spotoncam3640
5 жыл бұрын
Thanks ! My remote's capacitor had plucked out with the copper plating , which I resoldered by scraping the line and exposing the copper plating nearby in same series. Still that did not work. After watching your video, i heated all soldered joints with soldering iron and now my remote worked :-) Thanks again !
@vongvanmany4534
8 жыл бұрын
You Rock! Thank you for the Fix. this fixed my Vizio Remote Control XRT112
@julianscott76
6 жыл бұрын
And if all else fails and you just happen to have bit of gold leaf to hand, justy guild the contact face on the button. I used fake gold leaf and spraymount as an adhesive, worked a treat, but probably need to be gentle with the button.
@achostar
3 жыл бұрын
Thanks adam. It works for my sony remote tv. Much appreciated 😊
@gregmorrow
2 жыл бұрын
How can I fix dilapidated black traces which the buttons press? It looks like the solder doesn't stick to them.
@gerrythompson2122
3 жыл бұрын
Thanks. Never tried buttering before - it worked 😀👍
@ErickAndersen89
5 жыл бұрын
I cant believe it works. Thanks dude
@shahramjamshidiat
Жыл бұрын
so helpful bless you
@malhubs1243
2 жыл бұрын
What to do if the small pointy thing in the lower part is kinda black or burned
@kandacepereira795
3 ай бұрын
This was a good video
@rb1c35e
5 жыл бұрын
Thank you! I just fixed my BeFree audio remote!
@trublgrl
4 жыл бұрын
If you don't have a plastic spudger or opening tool, do you have a guitar? A guitar pick is a great tool for opening press-fit plastic cases. If you have any kind of plastic credit card you don't need, you can sand it to a wedge and use that. Even a butter knife can ruin your casing, so just don't use metal.
@mcdonaldtrumpet5120
Жыл бұрын
What if the led transmitter fell off the remote control?
@mikelike450
3 жыл бұрын
Thank you very much! It really works!
@mikelike450
3 жыл бұрын
I just fixed my remote. One of the IR terminal is loose just a little re soldering and its done. Thanks again! More power!
@gopikrishnankb
7 жыл бұрын
Hey can u tell how to fix it if the board is broken at the end part.. Plsssss...
@yogisanchez4878
4 жыл бұрын
Worked like a champ!!! Thanks 👍🏻
@noelrodrigues1738
4 жыл бұрын
I liked your video, was just wondering if you could help with an issue with my remote, I have a simple wall fan remote control and all of a sudden only the 'switch on' button stopped working, however the off switch button is working, I also tried to clean the switch board but the 'on' button still won't work work
@roger4789
Жыл бұрын
What if you snapped the circuit board in half? Got a AC remote, can get for $50. At the moment using a phone app I had programmed prior to kneeling on controller
@chelsiemason8604
4 жыл бұрын
Thank you for your help.
@larryphiish1729
3 жыл бұрын
Can I cut tracers on a dish remote to make it function as a universal remote without programming to dish?
@rimbourji6125
2 жыл бұрын
Hi ... what should i do if the remote stil flash light on but it doesn't work ...
@camojee4396
5 жыл бұрын
Thank you, your video helped me fix mine.
@Dest4nee
6 жыл бұрын
Thak you you help me tryed to fix my Smart Tv remote, fingers crossed it's works
@user-or7ji5hv8y
5 жыл бұрын
Can you talk about how battery acid damages remotes? Is that fixable?
@gemaffs
6 жыл бұрын
Adam, is there a way to fix the battery housing ruined by battery acid? This has happened to me several times now. You'd think I would have learned by now. Thank you.
@carlosk8103
2 жыл бұрын
This works though it's hard to tell which joint it is because they're so small.. ( even in this vid and author with experience didn't get it right first few times) I apply flux any areas that looks sus then just heat the areas with hot air til looks shiny.... I think this is better because no skill is needed and even a novice can get it on first try.. Just flux ,heat , done.... Cleaning with alchool before hand is also a good idea... tho not necessary
@akosiaaron458
4 жыл бұрын
Thank you
@gordonkissa2886
5 жыл бұрын
Thanx for the video, I just fixed mine
@tammyhorton582
9 жыл бұрын
Reassemble lg remote
@a-m8550
3 жыл бұрын
Fix sky Q remote
@amguerra1990
6 жыл бұрын
Thanks. This really helped. You are awesome!
@pamacshungary
4 жыл бұрын
it worked! reheating worked on my sony av remote, thanks! :)
@sofarsogoodsowot
3 жыл бұрын
Does a remote always require a capacitor? I opened a new stereo remote that is not working and there is no capacitor.
@Dj.abhi007
5 жыл бұрын
Hi, my home theatre remote's IR is always ON hence, not working properly. If i press any button then that IR is stopping. Its more like acting in opposite manner. Inactive state i could see IR flashing but while pressing button its not flashing. Can you fix this?
@SuperOlschool
7 жыл бұрын
really helpful thanks bro
@HepcatNZ
7 жыл бұрын
Thanks
@ayshasaeed8384
Жыл бұрын
I do see the flashing light but it still not working 😮
@engradnanbashir3480
2 жыл бұрын
Dear adam my IR led flases on all keys except power button 😒
@stargazer5956
4 жыл бұрын
TEAC remote control seems infrared light not working everything looks okay what's the solution.?well you got the tools for it I don't.
@madduran4536
4 жыл бұрын
Thanks!
@alainareed9952
Жыл бұрын
Not everyone has a soddering knife or test gears to test their things. So do u have a back solution for that?
@Wazza555
6 ай бұрын
Same
@monetchapman5700
8 жыл бұрын
Hey, thanks so much for this video. I threw my remote at the door, because I was mad at my brother and it shattered in pieces, and I fixed it back together. This was life saver cause my dad would've killed me!!
@gerrmaiin
8 жыл бұрын
Hi, thank you for the trick of the cell phone camera. It gives me hope to repair mi remote control.
@shafiqfa2432
6 жыл бұрын
My ac remote battery is draining fast... Any solutions plss....
@raymondchita5697
Жыл бұрын
Like wat if u have acid poured on it 🤔help me out plizz sir if u get this
@jeromaneubas2268
5 жыл бұрын
How do i fix my devant remote control it got wet and now the arrows and the ok buttion dont work
@ushanaik3138
4 жыл бұрын
एकदम भारी
@antoniodoss
10 жыл бұрын
Hi, one time i got a battery leak on my remote. I clean board and buttons but still some keys doesn't work. Thx.
@Poseidon6363
8 жыл бұрын
My tv won't receive the remote control signal, thinking it's the receiver in the tv that's at fault is their a fix for that?, thanks.
@StupidFastRC
10 жыл бұрын
I enjoyed your clip. Great stuff! Thanks for posting.
@medannymichel
6 жыл бұрын
Thanks I just fixed mine
@rishnp
8 жыл бұрын
followed your video.. i am surprised i was able to fix it. thank you so much
@rickyradioactivehorsehunte2247
3 жыл бұрын
I have a feeling this could fix my remote........re solder flux.......unfortunately can't find my soldering iron.
@prisilaminj2033
Жыл бұрын
Bro please help me my Bluetooth speaker remote not working please reply me. I will give you full details
@samuelbnisrael8803
5 жыл бұрын
Can i use a hot screwdriver
@DspaZZfrmdaf
3 жыл бұрын
Am I the only one who got tight and smashed their controller into peices 😐😐
@haitham.mohamed
7 жыл бұрын
excellent
@alinivancia4761
2 жыл бұрын
Bravo
@ramgoud6012
6 жыл бұрын
Thanks bro it’s working
@mobilecorner
7 жыл бұрын
thanks sir I am very very happy
@frezzy_gaming426
6 жыл бұрын
My spring in the remote broke off
@AshishUK
3 жыл бұрын
My remote IR light is continuously blinking as soon as i place the batteries, without pressing any keys, not sure what can be the fix?
@ridaassi8567
3 жыл бұрын
Open the remote and use rubbing alcohol to gently clean the remote circuit. Then clean the other plastic parts that were attached to the remote. Then try if it works. If the remote is still repetitively blinking, then you will need to solder as done in the video. If it still doesn't work, the remote circuit might have internal damage.
@AshishUK
3 жыл бұрын
@@ridaassi8567 Tried everything, just ordered another remote 😂
@ridaassi8567
3 жыл бұрын
@@AshishUK 😂 well I guess it just had internal damage in its circuit board.
Пікірлер: 167