Hi Donyboy, I new to commenting. I'm a 70 yr. Old gal with a blower and had to change my belts from ice in the impeller compartment. I love how calm and inclusive your instruction is. The lighting you use is so important. I succeeded with the project. Need to adjust the tension but am happy thanks to how much you care about us.!!! I' just so grateful to you!!!! ❤
@ChrisAndersen-g1o
9 ай бұрын
Thank you Dony! I have an old Troybilt 8526 Storm snowblower. I initially came across your transmission friction disc video. I was ready to scrap the machine but thanks to all of your excellent videos it’s still working today. Thank you again. You’re the absolute best in thoroughly explaining every step! Chris from South Dakota
@jonathanbosco8458
6 жыл бұрын
You are Canada's best small engine mechanic, a true ambassador
@fosgatexlt
Жыл бұрын
This video just saved my life. I have MS and the winter is tough enough. Taking my snowblower out and having it not shift sent me into a bit of a panic. Your video made it so simple and easy to fix! Thank you a million times!
@PartTimeJedi
Жыл бұрын
Your video saved me hundreds of dollars! Needed a replacement snowblower and saw a local ad for a 5 year old snowblower $100, mint condition EXCEPT the seller said it wouldn't change gears. After looking at it I knew a rusty bar was the problem. I bought it for $100, brought it home and followed your video. I now own a mint snowblower that switches gears smoothly for only $100!
@Jimmers131005
10 ай бұрын
Living in Pennsylvania, we had almost no snow last year and when I was getting my snow blower ready for this season, I couldn't get it to change gears. Your video solved the problem. It took me all of 10 minutes. Thanks.
@anthonywilps4675
3 жыл бұрын
A huge thank you from the lower 48. This video (and a few others of yours) saved me a ton of money and got my snowblower running again better than new. You're the best, thanks again.
@kensmith6708
2 жыл бұрын
Good video I do the same to my snowblower every year, I use a brush that I cut the bristles on to apply my grease to the gears and chains works great for me no pinched fingers. I'm new to your channel I'm a retired machinist and I like how you do things and explain why it should be done. Thanks again for sharing your knowledge.
@pauldugan2375
2 жыл бұрын
I have a craftsman snowblower that had issues with a stuck gear shifter. This video solved my problem, it was spot on!!
@DSheffield68
Жыл бұрын
Thank you. I have a Simplicity snowblower, and this was the perfect fix for my stuck gears.
@frank8263
6 жыл бұрын
Don thanks to you i just completed over hauling my toro 1028 power max snowblower. Ok i just replaced my auger bushing drive disc new belts adjusted my cables took apart my carburetor cleaned it out including the jets .what a difference the engine is running like new . Thank you again for taking the time posting all of your expert repairs. Frank.
@carlmiller1034
6 жыл бұрын
Awesome video Don! All that preventative (yearly) maintenance is so key, as you indicated, for the snowblower to last, and last, and last! Again, great camera/video work! Thanks so much!
@glengiaquinto5007
4 жыл бұрын
I should have looked at this before I put my blower on my truck to get repaired for the same exact problem. I am going to take it off and try this - very well done instructional video. Thanks
@lawtonheilman450
3 жыл бұрын
Thank you so much! I did my Toro last night and it was easy peasy. Your video is excellent and thorough. I was a little intimidated by the mysterious things that went on under the metal plates but your video showed me how straight it was.
@donaldstevens292
2 жыл бұрын
EXCELLENT - this is exactly what was wrong with my Ariens!!!! thank you..... and just in time.... we are getting 2 feet of snow tomorrow here in New England....
@PCHUGGER
2 жыл бұрын
Thanks for the great tutorial. On my first use of the year I had big problems shifting. We are expecting a blizzard this weekend so I bit the bullet - cleaned and lubed the whole machine. It now shifts gears like new. Why don't they make this square shaft out of Stainless? I noticed on your video, at the end when you were testing, that the lowest forward speed actually went in reverse. Mine did this too. I think I may have stretched or bent something a bit when I was struggling to get it to shift. A small adjustment was needed to get it back into the proper registration. Great video! You saved me money and my back.
@rbeer11
5 жыл бұрын
Appreciate the tips. It was easy. It helped to prop the blower axles on jack stands. That worked perfectly. My problem is solved. Thanks for the videos. So far I've replaced the carb and did this repair after gears seized on my circa 1980 John Deere 826 with your vids.
@paulwiden4061
5 жыл бұрын
Thanks for this----- just what I needed to free up my sticking shifter, I had no idea what was wrong but your video showed just how to get it working properly again! Nice clear and to the point how to video.
@mrfrog3350
6 жыл бұрын
Nice demo Dony. Super common problem, super easy repair.
@blaed011
2 жыл бұрын
wow great timing on this video we are expecting snow later and I started the snow blower, and the shifter was stuck. I will use this. Thank you!
@steveg95
4 жыл бұрын
Awesome tutorial. This was my exact model of snowblower. Took about 15 minutes to fix it. Thanks for posting this.
@willywgb
6 жыл бұрын
Great video Don. It's good to see you go above just fixing the main issue. I always believe in maintenance and what better time to do it than when you are already there. Another good choice for lubricating chains and gears is a product called Open Gear Lube. It is sticky as all get out and will stay where you put it. Great job.
@zenforhire
5 жыл бұрын
Thanks for helping diagnosing the problem. I read in the manual that greasing up that shaft is yearly maintenance.
@chrispolasky
2 жыл бұрын
Thank you for the video! I only wish I had watched it before I cranked on the shifter so hard that it snapped off. Next time I'll check your videos first. Thanks again!
@ManicMechanic007
6 жыл бұрын
Top of the line instructions leaving nothing to second guess. Thanks Don.
@osman_malak
2 жыл бұрын
Going to try this next week on my blower! I think you just saved me $100+
@Tundra211
4 жыл бұрын
Thank you so much for this vid. I have the same machine as yours and after changing the oil on it, I realized it wouldn’t go into gear. I found your video and now it is running better than the day got it! Thank you for saving me a trip to the service center and a couple hundreds of dollars!!
@DirtyJobsGuy1
4 жыл бұрын
Excellent job of explaining things! I really appreciate the time you took!
@johnspencer8802
2 жыл бұрын
Good, clear, simple instruction. Thanxs JS
@richie4ohio
3 жыл бұрын
GREAT job explaining the gear shifter issue. My blower doesn't seem to be seem to be spinning the Auger as fast/hard as it use to. I am wondering if the gear shifter isn't shifting it into full speed. Even through I move the lever for it to.
@Normster32
4 жыл бұрын
Excellent video thanks , My snow blower will only work in the fastest forward gear , when placed in reverse it still goes forward.... is the fix the same ? Cheers
@briancapuani1937
8 ай бұрын
Worked like a charm for my 13 yr-old Toro !
@greggscats
4 жыл бұрын
Great video as always Donny. The 5 hp MTD I got for my wife the lower joint of the rod was seized. Another one I have for sale I had to remove the hex shaft and shifter and set it in my vice and apply a few gentle taps on the end of the shaft.
@Markomyt1
3 жыл бұрын
Awesome! Great info. My blower R1 moves it forward and it jumps to a higher gear by itself. Your explanation should help me figure this out.
@hunter1953
6 жыл бұрын
For a modern piece of equipment I was surprised how well built that machine was
@IronMan-ml5yi
6 жыл бұрын
hunter1953 they are amazing snow blowers. We have the 926 model and it never clogs or slows down. Toro all the way.
@BIGBUBBADIESEL
3 жыл бұрын
Ah, between you and Mustie1, I think I'll tackle a similar issue. My snowblower will shift into reverse, but doesn't seem to catch. Maybe it's just an adjustment, but it's likely rust/corrosion on that sliding shaft. I'll check for adjustment first but then most likely be doing as you did, cleaning things up, lubricating and getting everything back in proper range & function. Thanks for uploading. Subscribed.
@carlcap14911
6 жыл бұрын
I keep my snowblower in the garage when not in use and believe it or not, there is no rust inside the machine or on the outside. After seeing you lube the machine, I should do the same. Good advice Don thanks.
@donaldshank7899
Жыл бұрын
Your videos are great and your instructions are easy to follow.
@donyboy73
Жыл бұрын
Glad you like them!
@muzikmon2267
2 жыл бұрын
Excellent video.. becoming a fan. I'm definitely a FLUID FILM GUY when it comes to spraying things to stop them from rusting. Not the shaft but the other parts.. If people spray that stuff on all the springs and everything and the parts that move when the machine was brand new they would never have any problems with anything rusting or seizing up. For the friction disc shaft just putting oil on with your finger once a year would have stopped that problem..
@danielesilvaggi
4 жыл бұрын
Just got the first major snow storm in Windsor Monday November 11 2019 and my shifter was stuck. Thank you for this video as I am sure this is what the problem is. Thank you and I am going to fix it myself.
@markogorjanc5686
5 жыл бұрын
donyboy73 thanks for all the videos you did by now, it helps me a lot in doing my service on chain saw or snow blower. Awesome videos DON. Thanks so much.
@davecormier4877
2 жыл бұрын
Did as you said. Thank you very much. Very easy task. Mine is on tracks and very similar to what you showed. Thaks again
@Der7w
5 жыл бұрын
Wow thank you Donyboy, I just repaired my snowblower who was’nt shifting :) 👍🏻
@denislajoie2427
6 жыл бұрын
Thank you very much, I saved a lot of 'money by fixing it by myself with your precious help.
@spresc2180
6 жыл бұрын
Being a motorcycle guy, chain lube is for chains. It will flow INTO the chains pins/links. Grease is for gear teeth and the slide shaft. Great vid.
@SierraOne
6 жыл бұрын
All about maintenance! Thanks for another great video!!! Any trick to prevent the bolts from vibrating loose and falling out?
@TheDLOC123
2 жыл бұрын
I just uncovered my craftsman snowblower from a snow bank. I got it running and it seems to be running very well. My question is it has 6 forward gears and 2 reverse. I have to put it in 3rd gear before it moves. The more I used it the other day the better the transmission worked. Both reverses both work. But still I only have the 3 high gears to move. Do you think just cleaning that hex shaft will return it to normal operating? Or do you think lose belts may have something to do with it.
@jessslader1455
2 жыл бұрын
Always helping me out with these easy fixes, thank you!
@m.5051
2 жыл бұрын
I know this video is older and it's a long shot but do you recommend draining the oil before putting blower in the service position?
@mikea3552
6 жыл бұрын
I fixed my snowblower thanks to you! I have a Yard Machine 8hp 24” with Tecumseh engine model hmsk80 318cc. It runs, but after 3-minutes, it dies. I installed a brand new carb, new spark plug, put new oil, and new fuel with stabilizer in it. The carb is a fixed jet with no adjustment screw at the bottom. There is also no screw to drain the carb if desired. Rabbit is all the way up, choke was all the way to the right when started and after it warmed up, set choke to far left. Ran steady and then it dies. What could be causing this?
@reneeleeak
3 жыл бұрын
Thanks for the info. and great video. I appreciate your teaching skills!
@nanoceramics2747
Жыл бұрын
Excellent! tutorial, easy to follow. Thank you
@jamesyee4143
Жыл бұрын
Thanks for that video on fixing the shifter!!
@johndemarest7069
Жыл бұрын
Great video. I was having that exact problem and was able to easily fix it. Thank you!
@donyboy73
Жыл бұрын
Great to hear!
@artlac
3 жыл бұрын
Just found your channel, Great job. I have a Toro PowerShift 1028. It will not stay in reverse, I have to hold the shifter lever , makes it hard to control when walking backwards. Any thoughts?
@kdr-ql7pz
3 жыл бұрын
Hello. My gears move fine and all up.. My problem is that it will not stay in a formal gear. Shifts to 6th gear and reverse. Any ideas? Does the linkage need to be adjusted? Also, no grease on the drive wheel, just the parts you mentioned. Thats very much. It's a norma snowblower also..
@ulverop
2 жыл бұрын
Do you know if this is the same on Yamaha YS624W snowblowers? I bought one used (cheap) before the season and it had a few issues I had to fix (new belts, new spark plug, cleaning and rebuilding the carburetor and a bit of paint - went from near impossible to start to starting very easily), but I didn't look at the gears (unfortunately). It works, but it is hard to get to shift. I often have to put it in neutral first, give a short "bump" to the drive handle and then shift it in to the gear I want...
@billk5727
6 жыл бұрын
Thanks Dony! Great video and tips! Lubrication is a top priority for machinery and is often overlooked or taken for granted. I have found that Fluid Film does a good job for lubricating the drive train, cables, pins and bushings. I also use it on the inside of the blower housing and discharge shoot to prevent the snow from sticking. Bill
@donyboy73
6 жыл бұрын
yes it's a good product for rust prevention as well
@grantw.whitwam9948
6 жыл бұрын
Great, easy, complete how to video.
@ddelv1601
2 жыл бұрын
Thanks. I think that was exactly what I need to fix my Toro that is stuck in reverse.
@corysgardentractors7084
6 жыл бұрын
hey don quick question... my husqvarna has a similar belly pan but the front of the belly pan has a 2'' opening and it fills the drive of the snow blower with snow and causes it to slip have you seen other snowblowers with a belly pan like that? would adding a piece of sheet metal to close it up and silicone help? keep up the great videos
@sparkx251
8 ай бұрын
Perfect. I wish I saw this years before 2024!!!
@zx8401ztv
6 жыл бұрын
Smashing job don :-D That clean and lube has just extended it's life a long way, all the chains and sprockets will last so much longer. It didn't look like it was ever lubed.
@johnhouli3450
2 жыл бұрын
Thank you. Don on my 2000 toro Power Throw 1st n 2nd gears are very slow how to fix. Thank you.
@semco72057
6 жыл бұрын
That is great to know and good for those in states where they get plenty of snow. I guess the same procedure would apply for the lawn mowers also.
@reecenewton3097
4 жыл бұрын
Yes, almost any mower that has variable speeds and a sliding rubber friction wheel.
@toddknaster9731
2 жыл бұрын
Thanks so much for the great repair video!! You Just saved me a lot of trouble and money!!!
@distilledfreedom1840
9 ай бұрын
Just bought a Toro 824 thrower from some unscrupulous fellows. Saw it run in 5th gear didn't check the rest. It goes into gear as far as the shifter up top however there is zero power 1-4. Would that be more of a transmission thing rather than the drive wheel being seized? Thanks
@mebcool
5 жыл бұрын
Nice job Donyboy, but why do you use an actual grease ? I would utilize a greasless lubricant like silicone spray or a standard dry lub.
@jean-guygatien4417
Жыл бұрын
Great video! You just saved me a service call
@spiderjoe642
2 жыл бұрын
Great video I was lucky 1st One II looked up was my Machine Best video Guy explained really Well I couldn't wait to do It Is easy job when you know how Thank you
@bryanpalmer8378
6 жыл бұрын
Great video. I will be doing this procedure on mine in the near future. Thank you for sharing your knowledge!
@donyboy73
6 жыл бұрын
good to grease as preventive maintenance to keep the shaft from rusting
@bryanpalmer8378
6 жыл бұрын
donyboy73 will do. I’m anxious to see the plate condition as there’s been some noise this winter my guess is that it’s got surface rust.
@radscc
6 жыл бұрын
Cool. Very good. Alagoinhas-Bahia-Brazil. I am mechanic too. Congratulations
@luvkountry
4 жыл бұрын
No one seems to give the measurements for the friction wheel to drive wheel clearance? Could you please mention what the clearances are? Thanks for sharing your talent.
@donyboy73
4 жыл бұрын
around 1/8"-1/4"
@im1forfun
6 жыл бұрын
Love your vids, very clear and concise content. Just out of curiosity what is the device mounted in your vise? Thanks!
@adventurousairman
6 жыл бұрын
Great video, I have a question ? I have the Craftsman 9 HP Tecumseh motor with the non adjustable jet on the bottom of the bowl, it idles perfect at low speeds , but at full throttle it lopes up and down and the controls seem to be moving themselves while its doing this. It also shoots flames out of the exhaust popping , its just not smooth. If I manually move the throttle linkage and hold it steady it sounds better. I've taken off the bowl, cleaned the jet, no difference. It will run while I'm using it, loping the entire time and it seems to be worse when its hot Anyway, any thoughts ? Thanks
@shawngleason1345
Жыл бұрын
Was hoping you may have a idea what my problem is. My 1028 doesn't like to move in first gear. I replaced the friction disc but made no difference. It works as it should in other gears. It's a bit older than one in the video I have the Tecumseh. Any help appreciated
@cdantzer4984
6 жыл бұрын
Thanks Don't,good,well explained info,as always.
@kevinwoodcock7578
6 жыл бұрын
Was curious what a repair like that costs in Canada Dony?...Was also wondering your thoughts on those Power max Toros? Was leaning heavily towards buying one...Thanks!
@clauslundberg9224
6 жыл бұрын
Nice repair and tips - thanks for sharing
@joefriday950
6 жыл бұрын
Excellent video. Thanks very much.
@cwsrad
4 жыл бұрын
I have the same Toro model. All my speeds/gears are working with the exception of my first gear. What could be the problem? All other gears are working fine.
@kdr-ql7pz
3 жыл бұрын
Similar problem, but it goes directly into 6th gear. Reverse is fine though. Tnx
@lestergillis8171
2 жыл бұрын
I normally use just a bit of white grease on my 1999 7 hp Yeard Man unit. Regular oil has a tendency to "sling off" of the shaft.
@bradleyrounds9148
10 ай бұрын
Fantastic vid. Very very helpful.
@alb5155
2 жыл бұрын
I recently changed the original friction disc on my 2015 Ariens snowblower model 921032 after approx. 6 or so years of usage. I installed a new disc just 30 days ago and used it only twice. Before the second usage was complete the new disc was totally fried. What could have caused this besides a faulty new disc?
@Tadders
3 жыл бұрын
Is there a master link on the snow blower drive chain? Is it possible to shorten a chain without taking the chain off?
@Peter-.H
6 жыл бұрын
Don. Fantastic video and full of great tips as always.keep up the good work & greetings from Montreal 👍
@reecenewton3097
4 жыл бұрын
My shifter was getting stuck last winter: this past summer I opened it up and performed this operation to get the shifting action freed up again, and while I was in there I changed the rubber friction drive wheel.
@muzikmon2267
2 жыл бұрын
What year is that Toro.. It doesn't have an LED light. And it looks like the wheels inside like the friction plate isn't aluminum like the new ones that don't rust. But I could be wrong..
@raymondcampbell2346
6 жыл бұрын
Good job on the repair Don.
@donyboy73
6 жыл бұрын
thanks Raymond
@christopherdye8904
Жыл бұрын
Did the trick for me. Thanks
@WaltHislop
9 ай бұрын
I have a 2003 craftsman 29" 9hp snow thrower in really great condition . It looks and runs like new. I have one problem: it is really hard to shift from neutral into first, second and third. from neutral into reverse 1,2 no problem and from third into 4,5, and 6, really easy. i have been a large truck mechanic for 40 years so i did the obvious i took the belly pan down and made sure the hex shaft had no rust on it and i cleaned the old grease off with carb cleaner and and installed new greece nothing seems to help it is still hard to move the shift lever past the middle i even tried using a flat file on the hex shaft with no luck So my question is, is it possible for the hex shaft to get bent in the middle and cause this problem? Have any ideas? Would purchasing a new hex shaft solve my problem? my original part # was 1501100 can i replace it with # 1501100ma any help would be greatly appreciated
@63256325N
6 жыл бұрын
Thanks for the video.
@gilbertrichard212
6 жыл бұрын
Thank you so much ! It helped a lot !
@TheToddRG
3 жыл бұрын
Thanks! worked like a charm
@nickjohnson9704
5 жыл бұрын
Awesome thanks!!! Now lets hope that's the issue with mine... I really don't want to take the gear box apart!
@danversbo
11 ай бұрын
What’s size of ratcheting wrench?takes forever using adjustable wrench
@rickster7834
6 жыл бұрын
Great video as usual. One question kinda off topic. What camera are you using to make the videos?
@donyboy73
6 жыл бұрын
an older jvc everio
@alexbeedie6940
6 жыл бұрын
Hi dony boy I'm looking for a bit of advice. I have a stihl 460 it started running a little fast like it was taking in too much air, I took the muffler off and look in the cylinder and it looks scored what's my best option?
@donyboy73
6 жыл бұрын
replace piston, rings and cylinder with oem or huztl kit from ebay
@DougW
6 жыл бұрын
another great video dony so that's what my cub cadet would look like if it wasn't built by people that hated me...
@LukeRT
6 жыл бұрын
I have to say Don no one sands a shaft like you..love the vids!
Пікірлер: 170