Thanks a bunch for the video, this helped a ton Pretty awkward staying up late and everyone is sleeping, and there is just squeaking constantly on my chair
@edwardg.6273
3 жыл бұрын
@hudson god damn right
@bumpadump2739
3 жыл бұрын
this is literally me rn
@PRODMUDDY
3 жыл бұрын
@hudson only reason i’m here
@xavier440x
3 жыл бұрын
Especially when im tryna beat my🥩
@RobertAniFreak
3 жыл бұрын
@@xavier440x Yup... I can relate
@julioqtt666
3 жыл бұрын
thank you now i can play all night without waking up my mom because of the sounds of the chair
@donevanbostad350
3 жыл бұрын
Thats me lol
@samthewizzy
3 жыл бұрын
Now to figure out how to make my keyboard and mouse quieter lmao
@PurpHaze830
2 жыл бұрын
Literally why I’m watching this video right now😂
@alexanotravez4670
2 жыл бұрын
Hahaha dude me too! This is so accurate
@RageAgainstBiden
2 жыл бұрын
Same
@themeparkdad
4 жыл бұрын
I tightened the bolts attaching the chair to the seat and it WORKED! No more squeaks. Thank you so much.
@PJ-be2hp
3 жыл бұрын
Lifesaver! The squeaking was driving me MAD!!! Tightened the bolds and serenity returned. Thank you.
@jchr3975
3 жыл бұрын
It will later
@themeparkdad
3 жыл бұрын
@jack ebola Sorry it didn't work for you. Others here said to remove and lubricate the bolts and then retighten. Loctite threadlocker might be better to use than lubricant.
@paulmunoz512
3 жыл бұрын
@@PJ-be2hp THISSS OMG TYSM
@ryankelly1840
2 жыл бұрын
GAME CHANGER
@NotGenome
4 жыл бұрын
Thanks! My stepsister has some lubricant in her room somewhere, maybe that will do!
@Satisfy79
4 жыл бұрын
....
@oldmansandwich8405
4 жыл бұрын
@Savannah Portales lol
@solarized7124
4 жыл бұрын
hold up...
@daddyvader1067
4 жыл бұрын
Dam sorry bro I left it there, I can’t really fit in her without it, plz don’t use all of it up!
@aombarbor
4 жыл бұрын
WhaT arE yOu dOinG stEpBro?
@bunker8digitallabs
2 жыл бұрын
This is what is great about youtube and the internet in general. I just googled this as a question and there was a simple, practical video produced to demonstrate possible suspects of what was causing the squeaking. Thanks for doing this!
@pramodskumar5037
Жыл бұрын
exactly, right!! best part of the internet!
@yeysbaws
4 жыл бұрын
THANK YOU!!!!! This is really annoying, especially when it's 2am, the sound it makes is like the sound of someone being murdered!
@DJTXD123
3 жыл бұрын
Gimme da poosy bawssss Can i av a hamburgger plzzzz!!!!!
@vrtlhvn3736
2 жыл бұрын
I hear b0ss when I read this comment
@pavandipajimal9373
3 жыл бұрын
I never coment on videos , however this honestly worked so well. I paid over 200 for my chair for it to start speaking but now it doesnt make a sound !!
@mysticstrikeforce5957
3 жыл бұрын
Yha the longer you sit on it the more things will become lose specially with our weight pushing everything out
@salhudz8637
3 жыл бұрын
Same thing happened to me! I was cursing over my lost 200 for a chair that squeaked nonstop. And now it almost doesn't squeak at all!
@Lemon-limon
2 жыл бұрын
If you throw it away you won't hear it again 👍
@JayBoy26HD
2 жыл бұрын
Your chair started speaking? What did it say!??
@escovfx
2 жыл бұрын
@@JayBoy26HD 😂😂😂 that’s what I was gonna say
@Taizunx
3 жыл бұрын
An FYI for the uploader: The first place you sprayed doesn't make any difference. You're literally just spraying WD all over the outside of the cylinder housing, behind the plastic cover. That doesn't do anything. The second place you sprayed is right in the friction-fit of the wheel base and the cylinder housing - that's most likely your culprit. Over time the cylinder can get slightly misaligned in the friction fit. To really solve this you'd need to hammer it out of the wheel base, clear any rust and dirt and then lubricate with a little bit of heavy duty grease in the socket of the wheel base before finally friction-fitting the cylinder once again.
@MrLangam
2 жыл бұрын
This is what I think as well.
@1mperialfist
2 жыл бұрын
How that doesnt do anything when he got rid of the squeeks?
@Taizunx
2 жыл бұрын
@@1mperialfist He sprayed more than just that one place... Why are you hyperfocusing on one thing?
@martinnovy4529
2 жыл бұрын
little late to the party but WD-40 is not a lubricant; it's has some lubricating properties but it's not meant to be one. Lithium grease is fantastic.
@VentureForward
Жыл бұрын
@@martinnovy4529 WD-40, at least the version used in this video, is a degreaser. Its used mostly to break away at rust and does not lubricate that well, at least not for very long. They sell a version of WD-40 that is a black/yellow can called WD-40 Specialist. This is what the average person would need if lubricating something. Theres even variations of the cans that focus on different things like Electronics or Hinges. Lithium Grease is a great option for these types of chairs though, as you have stated, just a bit messier for the average person.
@stephanddd
2 жыл бұрын
I hope this helps someone: I tightened all bolts, and lubricated the piston cylinder (as per part 2 of the video), no luck. But I finally found the source of the squeaking for my chair: The base plate is bolted to the bottom of the chair one one side. The other sideis connected to the piston assembly and held together with a horizontal bolt/rod. Lubricate that bolt, and voila. It's actually surprising that this single bolt carries the entire weight of your body when you're seated. There's also an adjustable stiffness wheel, with a rod that extends out from it. Lubricate the tip of that rod as well.
@cornhub7080
2 жыл бұрын
Sir I would kiss your feet if I could my chair sounded louder then a bed banging against the wall and I couldn’t figure it the fuck out after I got it sprayed it sounds quieter and smoother then when I got it
@cornhub7080
2 жыл бұрын
For anyone wondering the location it will be above the black cylinder spiral with cap under your chair and it will be silver and kinda stand out against the black
@stephanddd
2 жыл бұрын
@@cornhub7080 You're quite welcome - it drove me nuts as well, I'm glad you were able to solve it.
@jeffjeffjeff2
Жыл бұрын
Hey from across the pond here in the UK. Thanks for taking the time to record, edit and upload this video. I had a very similar problem with my otherwise really comfortable office chair and I followed the same steps you'd shown and it has cured the issue. In my case it was a few loose bolts on the arm rests to the base and the base to the back support needing lubricating as the noise was from a backward/forward movement rather than up/down as with your chair. Kudos to you!
@marius-stoica
Жыл бұрын
YOU SAVED MY SANITY, I LOVE YOU FROM THE BOTTOM OF MY HEART! the squeaking is still there but it's as you said, its 90% gone and the god damn reason for the extreme squeaking was probably the fact that 1/4 screws connecting the cilinder to the chair was missing, i have no ideea how that happened, i assmbled the chair with my own hands and i am in shock that this happened, anyway, thanks again, i hope you'll read this because you really really really helped a thon, thank you so very very much!!!!!!!!
@ruairim2283
2 жыл бұрын
Like other comments have mentioned, make sure all the screws are tightened. A few of mine were loose including one that basically wasn't screwed in at all. Tightening then made 90% of the squeaking go away
@ac_junior72
2 жыл бұрын
Perfect, thanks! After...I don't know, 1-2 years, I finally got to this. LOL. The squeaking was getting really bad, - no matter how tight the screws were. Any movement in my chair, especially reclining back would be loud. I don't have the exact same chair, but lubricating (WD-40 also) that cylinder sure helped with the squeak - as well as adjusting the seat up and down. Also the back part does disassemble - this is attached to the seat portion with 4 screws and this bent metal "L." where you screw this into the seat. Lubing those screw holes, also the metal "L" part (which is like rubbing metal on metal) totally did the trick. But yet, I will probably have to do this every 3-6 months. Not a big deal, thrilled the annoyance is gone. Thanks for this again.
@whitefang8329
3 жыл бұрын
Wow, I just fixed my chair. Holy...... I had to return my chair tomorrow and I did not want it because I only have a noise problem. Thank you!
@scentdragon8648
2 жыл бұрын
Thanks, man! I busted out my WD-40, but I didn't even think to tighten the bolts on the chair again since I just built it a couple of weeks ago. The combination of the two helped get rid of the squeaking for the most part.
@TheZenaMan
4 жыл бұрын
Really appreciate this! First video that came up when I searched for a solution, and it worked
@MrBengalezul
3 жыл бұрын
this is what it fixed my chair: just take some grease and put in on the bolts before you screw them on the base of the chair. just watched 5 videos and nobody says that.
@cybernaab
3 жыл бұрын
You are correct, i just did what you said, put some kroon oil handy oil on the bolts and in the holes on my super squeaky old office chair and it removed all the squeaking. Btw for the people that use wd40: dont use it on the shaft of the chair, wd40 breaksdown the seal that is in the cylinder if it breaks it sgonna leak air and your chair wil fall to the ground WD-40 gets a chemical reaction with plastics and rubbers
@mamarkg
3 жыл бұрын
oh my god, thanks for this. this is my nth video as well. haha and my chair is just a week old so none of the fixes really helped. thanks a lot
@BenHewart
3 жыл бұрын
Perfect!!! This has solved my problem! My chair is once again silent!!! thank you!
@weifunglow7128
3 жыл бұрын
thank you so much ur the legend
@JoeCastellon
3 жыл бұрын
@@cybernaab THANK YOU SO MUCH for the heads up on the WD40. I was JUST about to do that on the cylinder and you probably saved me from having a small accident in the future. I will try greasing the bolts instead. Thanks again!
@seanmiller1771
3 жыл бұрын
Great video, helped me detect where I needed to fix. I would just add that WD-40 isn't really a good lubricant and wont last, rather I'd use it to clean up all the gunk than apply a silicone type of lubricant (Blasters Silicone Lubricant). This would be a longer lasting solution compared to WD-40.
@preago
3 жыл бұрын
Yes, WD-40 works great as a penetrating solvent but not a durable lubricant. Lithium , silicone or bike chain lube work best and are dry setting.
@AloneInTheDork
2 жыл бұрын
Or WD-40 Silicone
@huagrapo
3 жыл бұрын
Thanks, this sorted it out nicely. Tip: If, like me, you manage to get WD40 rebound spray all over the back of your chair, isopropyl (rubbing alcohol) is excellent for scrubbing it off.
@chrisnguyen1720
2 ай бұрын
bro this shit needs more views.!! fixed my chair without the wd40 ... ive had this 300$ chair only two weeks so i was like every video is saying for old chairs.. mines is new and expensive... but yeah it literally was the same squeek u got from the first time u sat down on the video.. happened to be all 4 screws under the chair got loose in only a few weeks!.. wouldve never thought it was those screws cause i forsure tightened them as hard as possilbe when i assembled it.. its humbling but now i know to check the screws everytime i hear a noise!! no matter if new or not!! thanks helped me abunch
@John_1920
2 жыл бұрын
A couple screws on each side of the back rest unscrewed, lubed with WD-40 inside the screw holes and on the screws each, as well as some lubing on the spring that puts the back rest back to normal position after lowering it, and everything is clear of squeaking. Thanks for this video! :)
@LuisLopez-pp2pn
Жыл бұрын
Thank you. I'll try this because plan A from the video didn't work for my chair.
@formula_btw6052
3 жыл бұрын
DUDE THIS THING ACTUALLY WORKS!!!, i highly recommended this it fixed like 90% of the sqeakyness just like he said
@NeilBradleyMS
5 ай бұрын
Just watched both videos about the creaky chair. Absolutely awesome fix!! Our new computer chair has developed this fault, we even sent off for a new part, but the creak came back worse. It’s knowing exactly where to squirt the oil which totally did the trick, as a result I subbed to your channel. Top man. Many thanks - Neil (UK). 🙏
@entoleaks
4 ай бұрын
Thank you SO MUCH!! I saw videos saying that I have to apply grease in the gas lift but never thought it could be the bolts!
@Luxeighty8
3 ай бұрын
Holy shit! I was almost 100% sure I'd tightened all the bolts to the max. But I didn't! Thank you so much man. No squeking anymore :)
@will_it_work
Жыл бұрын
WD-40 is the last thing you want to use. WD-40 is a de-greaser, not a lubricant. It may act as a lubricant at first, but once it breaks down over time it will gunk up your item worse than it was before. Use a light oil like sewing Machine oil instead.
@oliviercaron28
3 жыл бұрын
They screws!! I was trying to lubricate every hinge and pivot point to no avail. Thanks a lot dude!
@rl4889
Жыл бұрын
Great video. All you really have to spray are the two bolts that hold the shaft plate. ie: 6:24 Take note of that bolt in the middle, directly above his paper towel. Yes, that one and the other side. Same bolt. Yw
@TheVexinator
4 жыл бұрын
That's not how you grease/lubricate that cylinder - you have to take the base off. It's held on by a tiny clip at the bottom of the cylinder. All you're spraying is the casing.
@ergonomictrends8446
4 жыл бұрын
Thanks for the tip, you might be right. What I did was sufficient though it seems, but I did also tighten the screws, which could have been the main contributor to the squeaking.
@mars-sj8lj
4 жыл бұрын
I agree, however I tried this on my chair before going through the hassle of opening up the cylinder and it def worked. It helped to move the telescoping plastic out of the way.
@zombiesbyte331
4 жыл бұрын
Just use the tissue paper on the floor when you're finished as you'll end up with WD-40 out from under the plastic telescopic guard :] - ps I did still give this video a like :)
@davids.5389
4 жыл бұрын
My friends I found the bolts that need the lube! It's the two bolts that cannot be tightened right above the cylinder! Just lube them up for 100% squeak stoppage!
@SLAYER-nm5zw
4 жыл бұрын
@@davids.5389 Thanks bro
@Diego-gu7pu
3 ай бұрын
Man you're the best. I tried so many things but this one was the solution. Thanks a lot.
@pibear1348
3 жыл бұрын
Thank you for your video. My squeaking chair has been driving me nuts for months. It turns out your first suggestion, to just tighten the screws, worked, because the loose screws were the cause! I didn't even have to lubricate it! (with canola oil, the only spray I have!)Thank you!!
@nurselunaaudio3758
Жыл бұрын
Thank you for the sunflower oil suggestion- I keep hearing wd40 isn’t long lasting so I was feeling intimidated by what other lubricants I should be using. I’ll try both!
@kimgonzalez9360
Жыл бұрын
Thx so much for taking the time. I agree on W-D- I use it on everything- squeaky door hinges, removing sticky tags from items, removing paint, so many uses. My chair still squeaks but I've identified where it's doing it and it has more to do with where the screws connect (which I sprayed) and my chair looks better than it functions! Taizun's comment below is on point as well.
@katcadenza3153
3 жыл бұрын
legit thankyou so much i just fixed my $500 chair in like 2 minutes, your a god
@parolo2
4 жыл бұрын
My brand new executive chair was making so much noise. After watching this video I added WD-40(lubricant) on the cylinder and no more noise. Thanks!!
@6ari8501
4 жыл бұрын
And now is there any noise?
@richn23
Ай бұрын
Thank you so much for this video cause not only My Chair got fixed 100%, But Also it became more smooth!
@CorgiHatGuy
2 жыл бұрын
Thanks so much! My problem was the part where the piston connected into the metal tilt mechanism. It was driving my crazy every time I leaned forward in the chair. Now it’s super quiet! Thank you!
@adriankrzyszton8
Жыл бұрын
DO NOT use vegetable oil. I've done that in the past. As it ages, it starts to dry out and change its consistency to glue like substance. You don't want that, use proper lubricant.
@marcellus2319
7 ай бұрын
Another tip, that I used to fix the back piece of my chair, is that small white tape, that is used to wrap around the thread of screws, that way when you put the screw back in it will be 100% tight again if it was loose or stripped
@D33Lux
Жыл бұрын
this helped alot, one thing I also noticed don't over tighten screw, just snug. When I over tightened it squeaked more. I would suggest, tighten snug, then sit in chair and move around, if it makes noise try untighten a little. Check each screw to see which one makes more noise.
@Deeplycoiled
19 күн бұрын
Tightening the bolts worked! Thanks so much!!!
@pekkavalkonen1973
Жыл бұрын
Thanks! u make my day. No squeaky anymore at all, but i done totally maintence, clean up bearing and new grease, screw lock glue for screws..
@dylanhughes5944
2 жыл бұрын
Spraying silicone lubricant onto the part where the shaft and the upper chair assembly meet fixed the squeaking for me. Thanks!
@charleshines1553
3 жыл бұрын
I have one that creaked fairly loudly when I push it back. I just happened to have some graphited lock fluid that I found in the garage. That made most of the noise go away. For those who don't know, graphite is a very good lubricant even if dry. If you want a can of the stuff I used, I got it from an auto parts store. I would think that a home store might have it, check first. The one I used came in a aerosol can. I am not sure how else it might be sold. It will have a ball inside it like spray paint so shake well for a minute or two. Keep a paper towel handy to wipe ant runs. Use it outside if you can because it is stinky until it dries. Use it outside also so that you don't get it on your floors, I have no idea how difficult it is to clean up from a rug. I imagine it is not fun.
@Human_Evolution-
Жыл бұрын
I make my own graphite powder with a knife and a pencil. Yolooooo!
@kraig73
Жыл бұрын
Hell Yeah! This is a BIG HELP...i tried with my office chair and could not get it 100%, i solved it 50-60% with WD-40, but now i see what i have to do to get closer to 100% Big Cheers
@dollardrow6097
7 ай бұрын
dude. 1 minute guide how to flip chair. What a gem! xD Nice video btw
@darkcitizen
Жыл бұрын
Thanks so much man!! I've tightened the screws and it's no more squeaking. You saved me so much nerves!!
@flaminghotcheetos4168
Жыл бұрын
wow this actually worked! the annoying sound of my chair is now gone. thank you!
@Monster33336
8 ай бұрын
Thanks. I kept oiling my chair over and over wondering why it kept squeaking. Never checked the bolts. but it worked by tightening them.
@qwlol
7 ай бұрын
CAN CONFIRM works like a charm! I have tried to lube my chair a few times to no effect. Turns out the trick is - as the video points out - to let the oil SIT for about an hour so it has time to seep into the cylinder before flipping the chair back. Thank you so much for uploading this, saved me a few hundred bucks now that I don't have to get a new chair anymore :D
@LordSplittawig
10 ай бұрын
This helped me... I didn't even think about the connection points between the seat, the back, and the arms, which is where the problem was for me, apparently. This chair is quiet as a mouse now. Thanks!
@HonouredOllie
2 жыл бұрын
Very good easy to follow video. Who knew it would be as simple as tightening some screws
@richcolour8632
Жыл бұрын
Perfect! For me it was the 4 bolts holding the chair to the base. Nice and tight - now silent!
@TwistedX49
3 жыл бұрын
I was going right for the WD-40, but watched this video and I did just need a corner bolt tightened! Don't do the WD-40 before you tighten up the bolts. The stuff, doesn't smell that good (to everyone) and it does tend to get a little messy for indoor applications. Thanks! You saved me some good time and effort.
@Vezmus1337
3 жыл бұрын
All I had to do was turn the chair upside down then loosen the cap that controls the resistance of the chair to leaning back (the tilt tensioner) all the way loose until I saw some lubrication leaking out, then I tightened it back up to a comfortable setting. No more squeaks and it's easier to lean back now!
@peterpayne2219
4 ай бұрын
Greetings from the future, and thanks for the video. Fixed me right up. In my case it was the metal piece that rotated when the chair moved backwards, creaking against what it was attached to.
@jheybrent
3 жыл бұрын
Tightening the bolts solve 90% of the squeak, the rest may be coming from the intersection of the gas rod to the base of gas rod to the seat, i wished i put oil in there before i assembled this chair
@Bibi036
2 жыл бұрын
fasten the bolts solved it for me, thank you!
@messiahgaming4242
10 ай бұрын
Thanks man!!! $180 chair kept squeaking. Tried a few different spots but I finally got it!
@dkorleski
2 жыл бұрын
great video. I had a squeaky office chair so I watched your video. Tighten a few bolts and the squeaking went away. Thank you so much!
@breakRback
Жыл бұрын
Tightening the screws really solved the problem for me. Creaking was pretty much gone after doing it thanks!
@kevmarcel5953
2 жыл бұрын
This bideo should have a lot more likes! Very thorough video!
@Soapies
2 жыл бұрын
Wow thank you so much. I also appreciate the fact that you suggest items that most people have on hand. I don't have any special lubricants buti do have wd-40 so that worked in a pinch! So glad the chairs quieter
@bensalzbergguitar
2 жыл бұрын
thanks! I'm pretty sure mine was the chair-to-cylinder interface, which is just press-fit when you assemble the chair. I sprayed WD-40 in there and it is way quieter. I'm sure 1000 nerds will be here saying it's not a lubricant, but it does have some lubrication and penetrates well because of the solvents
@zachr3467
4 жыл бұрын
I like and dislike this video. I like your style of showing how to do this task, and the tips about flipping the chair over. However, when I tried oiling in this method, my chair ended up squeeking 100% as bad as it was. Tightening the screws is good practice, I think, but seems to have 0 effect on the squeeking. Here's what I did: Unscrewed the whole underplate 4 screws off and placed the whole wheels/plate onto a garbage bag to catch oil. Set it with the wheels on the floor, and shot oil downwards into the ratchet areas (the piston, etc. connected to the lever that raises/lowers the chair. Then for good measure, I shot oil on everything metal I could see and let it sit for about 1-2 mins. Result: 0 squeeks, couldn't believe it.
@Kipricoffical
3 жыл бұрын
you are a fucking lifesaver man thank you...
@0nemoa
2 жыл бұрын
Just remove the retaining pin on the bottom of the cylinder and then clean the barring off there will be 3 parts inside the cylinder that you need to clean and then lube. Do it the right way it wont waste time and make sure you use grease not spray lube. Grease with super luibe or lithium grease. Do this and your chair wont be dripping WD40 for months to come and you dont need to spay down any metal areas or anything, as the sound comes from the inside of the cylinder the ball bearings.
@aidenplayz42069
6 ай бұрын
thanks cant believe it was that easy
@matti5900
3 жыл бұрын
Thank you for your video. I just tightened the screws and i solved my problem! I suggest you all to do this before adding lube
@bryancruz6689
3 жыл бұрын
Thank you so much I my chair isn’t very old and already got squeaky so I got a little mad I thought it was because of the brand gtracing because it was a budget chair but it turned out it was just the screws
@SinanSoccerFKN
3 жыл бұрын
tightening the screws did fix it for me! thanks!
@airelemental
3 жыл бұрын
Thank you soooo much for this video. Turns out mine was due to bolts being loose. I would never have guessed that so thank you!
@manonlblais
3 жыл бұрын
I have the same chair! only the colour is different - and the damn squeaking has been driving me out of my mind! I had only a couple loose bolts - but lubing the cylinder was the fix it needed. Thank you so much for your help.
@fratozsarkams4043
4 жыл бұрын
Also in some models holes in the bottom plate are wider than the bolts so it is possible to attach plate little misaligned, and that can also cause very loud squeaks.
@LukeIsSkyWalker
10 ай бұрын
This is awesome!! I have a chair making much more squeaky sound than yours. Right now it is no sound at all after using DW40. I have DW40 just didn't know it can do the magic for this.
@CalabusDabus
3 жыл бұрын
WD-40 aka Water Displacement 40th Formula, is a degreaser not a lubricant. Using WD-40 for squeaks will work for a couple of days, but it will make the squeaking worse over time. For this you should use a grease, oil would also work, but you would have to reapply sooner than with grease.
@WeThePeople11
3 жыл бұрын
Yep WD-40 will just make the issue come back, silicone lubricant spray is a good one to use
@Claud1995
3 жыл бұрын
This legit worked. Absolutely no more creaking and it used to be so bad I was ready to buy a new chair
@WaynesTW
2 жыл бұрын
I actually bought a new chair and it started squeaking 1 month later smh
@itsgregoire7175
2 ай бұрын
i ve got to thank you man this video saved my sanity
@madmax-df3ti
3 жыл бұрын
Thanks for the hints, I went a little further, wd40 dries too fast to lube for long. So I used multi-purpose oil (3-in1) on the pivot points and on the cylinder I brushed on some general purpose grease. You are right on every 6 months on the tightening of the screws, some of mine where loose. But even after tightening it still squeaked, they key was the oil and grease. No more feeling guilty at night while I get a gaming session in while the wife/ girlfriend sleeps : )
@xiunbe
2 жыл бұрын
forsenCD
@justaweeb14688
2 жыл бұрын
Chills
@przemek6202
3 жыл бұрын
thx its great to come across an issue and solve it straight away u earned a sub from me :)
@beccstah77
2 жыл бұрын
thank you so much for explaining the bolts needed tightening, huge difference!
@virathiyam5401
Жыл бұрын
Will regular grease or silicone spray work for lubricating revolving chairs?
@Tigeroovy
2 жыл бұрын
I've got a Killabee chair that does the same thing, so I'll be giving this a try later!
@bananenbro2387
2 жыл бұрын
Thank you very very mutch, the problem is solved! THANKS!
@Patrick90
Жыл бұрын
Followed your video and my squeaky gaming chair that had been driving me nuts forever is now pretty much silent. Thank you!
@LBOdeepkameleon
2 жыл бұрын
Great Video, very concise and clear, and well filmed with good lighting. Thanks sir! Question...should you lift up the plastic pieces (cylinder guards) while chair is upside down to oil, or does it matter? Thank you again.
@kraken8255
3 жыл бұрын
Thanks man did everything you said and now it works great
@hazranfutsal95
3 жыл бұрын
Thank You very much for enlightened me. No more squeaks now. im so happy.
@kbroomall
Жыл бұрын
Yo George, you are the man - my chair sounds much less annoying now! Simple fix and appreciate your instruction - makes sense lol
@walletphonekeys
2 жыл бұрын
Thanks gangsta this fix my seat I've had for about 4 months ago before summer
@michellenoice3718
3 жыл бұрын
Thank you so much! My chair is so silent now!!! It used to scream at me!
@ciarajackson1485
3 жыл бұрын
My brand new vanity chair was squeaking and thank god for your video I’m now squeak free... thank you
@MajdAA
3 жыл бұрын
man, the last time I had a chair I broke it because of the noise, it drove me crazy. I finally bought one and after two hours it started making the same noise but this time I fastened the bolts really hard and the noise stopped. THANK YOU!!
@Duke49th
Жыл бұрын
Please do not use oils of any kind and especially not WD40 which contains acid - other than maybe chain oil (the one for motorcycles). Best choice is still grease - mechanic grease. If you use oil, you will end up oiling it every couple of weeks/months. Also you just want to remove the little (sorry not english native speaker here) security clip on the top of the piston that you can see at timestamp 7:39 The thing that locks it in place. Be careful not to bend/break or lose it. Then pull out the piston, grease it (with a brush )on the cylinder sides and on the top (where it sits on and has the whole weight). Put the piston back in, put the clip back on and that's it. It's a matter of 1 minute work and probably lasts longer than the initial grease.
@palmvariety
9 ай бұрын
This comment save my life 🫡
@el_chiwi
5 ай бұрын
THANK YOUUUU. THIS HELPED A LOOOOTTT!!!
@johncandido2241
2 жыл бұрын
Did the job. Thanks Ergo; You da Man!
@AzoXoza
2 жыл бұрын
You have helped me, more than you can imagine !. WD-40 Just a couple of spray's and my problem was over. Thank you so much !.
@KhameleonOne
3 жыл бұрын
Followed your instructions. Excellent result.
@intense1802
4 жыл бұрын
Works perfect no more squeak noise , Thanks :')
@SALWEL
2 жыл бұрын
thanks a lot man, you are my hero that's helped me
@Ty-er5ok
2 жыл бұрын
Thanks for this! I have DPS gaming chair from Costco that has been squeaking and driving me nuts! I had already tightened all the bolts and that didn't help much. But as soon as I squirted some lubricant where you indicated on the cylinder, 90% of the squeaking is gone. It was squeaking if I made any slight movement. Now it only squeaks when I get out of the chair. I'm betting what I saw in your Part 2 video will do the trick on that and will try that tonight. Thanks again!
@1NV4DR
Жыл бұрын
Absolute legend ❤️❤️❤️ This worked perfectly for my ONEX gaming chair
Пікірлер: 548