Traxxas rustler....I was only able to drive it 20 feet away,watched your video and tried it...now it works great ran it about a city block away with no problem..thanks
@mathieuaj
2 жыл бұрын
Thank you! We bought my son a used Rustler and he could only drive it one house away. Now it runs 7 houses away, and maybe more. That's just as far as we've tested it. Great fix!
@barrymadill5853
Жыл бұрын
Bud saved my camping trip. End of the wire ended up in the motor and melted the crap out of it. I thought she was a gonner. Did this little gem and shes good to go again. A little shorter but good to go. Thanks.
@donniewiggs8749
Жыл бұрын
Worth a try. Thank you for posting this
@manush1119
3 жыл бұрын
I have metall peace on but I lost range total what is. The. Problem 15 meters it stoped
@patriotvengeance5224
2 жыл бұрын
31.23mm is the exact spec on 2.4GHz antenna ... it should return it to factory if done correctly ... good video!
@giovanitonel
5 жыл бұрын
Thanks Guy. I did exactly you showed, and I fixed my Rustler TQ 2.4 short range problem.
@jonaspersson2804
3 жыл бұрын
You take the speed of light divided by 2,4 the Ghz divided by 4. ! 31 228 381 and make it to mm insted of m/s you just put an " , " aftare 31. :)
@boardnski156
2 жыл бұрын
Thank you for the video! This got my old trusty Stampede going again!
@HvdE1000
4 жыл бұрын
Open the box and solder on a wifi airial cable from a laptop it's same coax cable traxxas uses. Done in under 10 mins and you have original range.
@Thomas_Smaling
3 жыл бұрын
I cant tell if your joking or not
@HvdE1000
3 жыл бұрын
No I am not joking. Fixed srvarel rc this way!
@Thomas_Smaling
3 жыл бұрын
Ok
@msl2796
7 жыл бұрын
HI, thanks so much! You saved my receiver's range!
@brandonhouston8086
6 жыл бұрын
its actually close to 31 mm a little under its like 30.73 mm if you to the math you devide 300 by 2.44 and take 1/4 of that
@RCMayhemChannel
8 жыл бұрын
Thanks man, I get almost the same range now! :D
@relaxeful
3 жыл бұрын
worked for me thanks
@ravindusrinath5573
8 жыл бұрын
Hi.. I have a traxxas summit .when I operate the model about 15 feet away from me, it looses signal. I have to go close to the truck to get signal again. Then I thought it was from batteries, I changed those to new ones. But problem remains as before. And I connected fully charged Lipo batteries. I installed traxxas roof light bar previous day. So I thought problem comes from there. Then I checked it and re installed it. So I can't find any fault here. Before I worked great with wide range.Thanks.
@jerrysherwood6475
5 жыл бұрын
This just happened to mine, did you figure out what was wrong with it?
@IowaBudgetRCBashers
Жыл бұрын
Gonna try this
@Don_Matteo
Жыл бұрын
I still have the metal piece on it but still the range is all of a sudden only 15 meters.
@musicman6887
7 жыл бұрын
But if a broke just the end piece not the metal one what can I do to have some good range again?
@barracuda6817
5 жыл бұрын
Can I get a link to that "metal piece" please?
@EverydayBasher
8 жыл бұрын
sweet vid man.
@andrerose6897
6 жыл бұрын
Hmm.. I have everything on but it goes like 40 feet and loses signal, is that normal??
@Inertia888
2 жыл бұрын
Full factory range, should be about 100yards.
@durrellglenn6545
2 жыл бұрын
IS THAT WHY THE TRAXXAS RECEIVER LIGHT BE FLASHING GREEN BECAUSE OF RANGE ON ANTENNA
@jacobbeattie5j468
7 жыл бұрын
I used my fingers but its stuck inside it
@kloppskalli
3 жыл бұрын
dude, wash your finger nails 😵
@baligepandu9396
5 жыл бұрын
And how by remote control and receiver than how to fix whith battery tell me please
@zoranmihalic4900
Жыл бұрын
To ce sad pojacati signal autic ce ici puno dalje
@chrisr4800
3 жыл бұрын
I measured my good one on 6533 transmitter and it's actually 29mm so there may be slight tuning variations with the models. Can anyone confirm length of 6519 and 6533?
@justinmallaiz4549
3 жыл бұрын
I will check my good one. But till then Note: 1/4 wave length of 2.4Ghtz is 31.25 mm. That is theoretically what it should be
@Inertia888
2 жыл бұрын
@@justinmallaiz4549 if the manufacturer puts capacitance or induction at the PCB, it can be tuned to a little longer or shorter than the exact 1/4 wave length. I don't know if Traxxas tunes their radios or not, but some places do, so it is worth taking into account the possibility
@backfireproductions4362
7 жыл бұрын
what if the wire got cut just a little beneath the metal piece?
@RCBros2000
7 жыл бұрын
MasMoto just strip the wire back like i did
@backfireproductions4362
7 жыл бұрын
RCBros2000 thanks
@chevyrc3623
8 жыл бұрын
that's good
@slimchancejw
7 жыл бұрын
How long is that in merican 🤓
@RCBros2000
7 жыл бұрын
32mm in inches is 1.25984" your not going to be able to get that on a ruler. just use Metric instead of standard. its much easier
@teamvenom091
7 жыл бұрын
RCBros2000 or just go to 1 1/4 inches. 0.009 is nothing.
@chadfolmar5900
6 жыл бұрын
Don't forget about 1/32 and 1/64 in standard measurements 😁
@baligepandu9396
5 жыл бұрын
Traxxas rc car how to find motor voltage
@traxxaskid9200
4 жыл бұрын
Ah.... but you see, that depends on your battery. You know how it's possible to use a brushless speed control on a brushed motor? You can do the same with a volt meter. I forget precisely what they are called but, hook it up to the speed control, hammer it, and it should tell you voltage and output. You would need 2 of the 3 of these measurements to figure out the missing measurement: battery voltage, motor kv, motor rpm under 0 load. Battery voltage multiplied by kv = maximum motor speed. Motor rpm divided by battery voltage = kv. Motor rpm divided by voltage = kv.
@aaronwulff8068
7 жыл бұрын
show me cutting
@AlanGarcia-js9ck
6 жыл бұрын
32 cm or mm
@zoranmihalic4900
Жыл бұрын
32mm
@jacobbeattie5j468
7 жыл бұрын
How do i take the receiver off
@traxxaskid9200
4 жыл бұрын
There should be a nut that holds the antenna on, loosen it, and remove it. Take the two screws off the big cover that has Traxxas written on it, lift the cover, remove the blue O ring, gently pull the receiver out, pull the plugs out for the servo and speed control, pull the antenna out, lift the receiver out, done. If you have any questions, you may ask me if you dont find any information on it.
@traxxaskid9200
4 жыл бұрын
I also recommend paying good attention, taking pictures of your work, and diving in. That's the most affective way you can learn. The reason for taking pictures is so if information is forgotten, it isn't lost, you still have pictures to rely on.
Пікірлер: 51