Thank you so much for this video! Had this exact thing happen to me yesterday and I freaked out until this video helped fix my problem! 🙏🏼🙏🏼🙏🏼
@pickandgrinnin
2 жыл бұрын
Thank you for posting this!! I pray that’s what is wrong with mine.
@kcbeekeeper
5 жыл бұрын
You should never tap the dipstick on the ground or let it touch anything that will transfer contaminants to it. When you replace it, the dirt will be in your oil. Don't let the negative comments get you down. Learn what you can from them and ignore the attitude. There's plenty of help available to improve your channel content and presentation skills. Ask your friends to critique your videos before you post them. Stick with it if this is what you want to do and you'll be fine.
@wtrbflo72
Жыл бұрын
There is an oil cooler between oil filter and the case on Kohler Courage models... which has a gasket. For sure on the 22 hp. vertical shaft model. VERY easy fix...but will freak you out initially when you see oil leaking!!!
@scraigrogers
3 ай бұрын
How do I fix it?
@wtrbflo72
3 ай бұрын
@@scraigrogers if I remember correctly....take the oil filter off and there is a kind of a bolt head where it spins on. Take that off as you would any other bolt. The oil cooler is between the filter and engine block. IF I remember correctly.
@wtrbflo72
3 ай бұрын
@@scraigrogers and there is a gasket between the block and oil cooler. Good luck! Easy.
@wtrbflo72
3 ай бұрын
@@scraigrogersI just looked and the cooler looks like 3/4 - 1" restrictor plate with cooling fins.
@barrettbarker8343
4 жыл бұрын
I wouldn't tap the oil stick on the sandy ground then put it strainght back into the engine, fyi. Good satire!
@dougiefresh42069
3 жыл бұрын
I had to rewind it to make sure I actually seen what I saw 🤦♂️ you could be the best mechanic in the universe.....if I ever see someone do something like that they lose any credibility
@ryandoland3516
5 жыл бұрын
Thanks man
@violetmullarney7280
2 жыл бұрын
I'm very mower illiterate and I just had my mower service but it looks like some of my I don't know if they're screws nuts bolts whatever the heck they're called are missing where they were before and this man's been doing mowers for 40 years I have a zero turn simplicity 2020 52 inch.can also ask u if gear oil will be ok til I can ask how to grease my squeaky deck
@evanduitsman5998
5 жыл бұрын
cool video
@braedenr9645
4 жыл бұрын
Mine is leaking around the oil filter, but it is tight. I see a gap where the gasket should touch, I have tightened the male end adapter. and no there is not a gasket stuck on the machine, its almost like the male adapter piece came out 1/8 inch. But it is tight I don't want to over tighten it.
@danielspringfield7861
6 жыл бұрын
thanks for the advice! i filled my walk behind with oil yesterday and did only 1 yard, by the time i got finished i saw a trail of oil behind me coming down the drive way, then i realized the oil filter was loose...same situation, i thought that it was something major but turned a simple fix, thanks man!
@iwanaGoFast2010
5 жыл бұрын
I been working on mowers for 15 years and NEVER found a leak to be a loose oil filter.. Thanks for the laugh.
@ArcolaBridge
4 жыл бұрын
I got a Toro MX 4200 with the actual Toro motor not the Kohler. It's a 22.5 horsepower. I'm getting oil around my oil filter leaking down ... I tightened the filter and even after the second filter it's still leaking. I wonder... Overpressure?
@braedenr9645
4 жыл бұрын
@@ArcolaBridge hey I have the same issue with a toro time cutter zero turn. Did you fix your issue? if so please share what u did. Mine is leaking around the oil filter, but it is tight. I see a gap where the gasket should touch, I have tightened the male end adapter. and no there is not a gasket stuck on the machine, its almost like the male adapter piece came out 1/8 inch. But it is tight I don't want to over tighten it.
@ArcolaBridge
4 жыл бұрын
@@braedenr9645 I think oil pressure is pushing out oil either around the filter or around the filter housing. I have not fixed my issue.
@xesusv4069
3 жыл бұрын
@@ArcolaBridge did you get it fixed? Having same problem toro engine zmaster
@ArcolaBridge
3 жыл бұрын
@@xesusv4069 no I haven't, I replaced it with another new filter and same issue... I think maybe it's just overpressure pushing out around the seal combined with vibration.
@TheMan-ue7ri
4 жыл бұрын
Oh man I'm pretty ....gotta go comb my hair . Oh yeah
@luinva
6 жыл бұрын
Hi. Loose oil filter. Tighten it. Your welcome 10 second video. Less wasteful chatty chatty.
@joeidgtlopez6801
6 жыл бұрын
Not helpful at all
@Anonymous03100
4 жыл бұрын
You are not old enought to be riding that mower.
@cayde7469
3 жыл бұрын
At least he has a mowing job and is making KZitem videos while your just watching them and trying to discourage him! 😂
@dougiefresh42069
3 жыл бұрын
He seems like a responsible enough kid. I was push mowing at 10 and bought my first rider at 12. Even worse than that, I was driving a full sized tractor on our farm when I was roughly 8. I know 40+ year olds who shouldn't even be allowed to use anything sharper than a spoon. It's all about being taught the right and responsible way
Пікірлер: 31