❤ If you liked this video, 🙏 share this video with your friends 📈 it will help the development of the channel! ❓ ask your questions
@sanjayprackashsk6839
4 ай бұрын
What is that injection
@landakdeli
3 ай бұрын
H
@AlliannaFitness
3 ай бұрын
I have some questions , can you answer please.? My axel on the back wheel split in two, bearing fell out, there is some bearings I can inside that cassette thing, I don't know how to put the bearing back in where it's hidden The bike shop said £90.00 to fix, my bike only worth £150.00, I like to fix myself because I can't afford new bike yet, what tools I need please , do you have a step by step video on dismantling the back wheel? Thanka
@djbastetusa
3 ай бұрын
Finally a video with a bike that’s actually in use not a brand new 10k bike that’s never seen the street or trail. Thank tou
@NiceBikeService
3 ай бұрын
Most of the bikes in the workshop are like this
@richardbottom9843
2 ай бұрын
what would a new bike take away from the repair though? the point is to show you how it's done. and you can see stuff a bit better with clean parts
@nikosgogos8183
18 күн бұрын
I have i badly used merida matts and a merida big nine i yot 15 year later... Now rebuilding the matts for my father so he can ride with me a bit and i see all the damage on it and cringe... That bike went through a lot
@davidvalverde6351
3 ай бұрын
Me gustó mucho tu manera de retirar los balines y acomodarlos y el aplicador d grasa,un trabajo muuuuyy limpio
@NiceBikeService
3 ай бұрын
gracias por tu comentario 😘
@Rev.RatsRides
Жыл бұрын
I recently took a gamble on a motorized bike that has this exact issue. Thanks for the fix!
@villageboy3316
5 ай бұрын
Facing that problem with whirlwind c4. No spare part shop
@bryngriffiths1826
Ай бұрын
Same bro
@atikulislamsopnil3885
Жыл бұрын
Suddenly, My Freewhell doesn't work, freewheel 1 pin Broked i install 1 Pin... Now Freewheel Have 1 Pin and Bike Properly Working... Thank You❤❤
@alangastonsalvatierra6518
8 ай бұрын
Tuve exactamente el mismo inconveniente... Me mate la cabeza desarmando para ver que era... Lo logre y lo pude solucionar... Pero si tu video habría visto tu video antes (hace dos días atrás) me hubieras ayudado como no te imaginas 👍👍
@NiceBikeService
8 ай бұрын
))) en 4 días este video cumplirá un año)))) tenemos que hacer una mejor búsqueda))))
@zen5789
24 күн бұрын
Bardzo dobrze zrobiony film to co najważniejsze widać w praktycznym pokazie..Dziękuję.
@NiceBikeService
24 күн бұрын
cieszę się, że mogę pomóc! dzięki za opinię 😘
@zaqckyryan658
2 ай бұрын
This video saved my life. Thank you so much!
@NiceBikeService
2 ай бұрын
glad to be of service! thanks for your feedback 😘
@mathbluz
Жыл бұрын
This hook tool made from spoke is amazing. 😃
@NiceBikeService
Жыл бұрын
Thank you for your feedback
@tysonogoti121
6 ай бұрын
I can now fix my bike myself thank you.
@NiceBikeService
6 ай бұрын
Thank you for your comment! 😍 if you liked this video, share this video with your friends ❤️ it will help the development of the channel! 📈
@tysonogoti121
6 ай бұрын
Alright
@LD_FPS
Жыл бұрын
🇧🇷This was a problem I faced straight! and it's very popular here in Brazil
@LD_FPS
Жыл бұрын
@@NiceBikeService Exactly 😁🇧🇷
@dastrevasparaaluz
Жыл бұрын
O pior que maioria das bicicletarias assistência técnica não executam este tipo de serviço.
@LD_FPS
Жыл бұрын
@@dastrevasparaaluz verdade mano 😢
@ProfessorSnape22
2 ай бұрын
Why is that?@@dastrevasparaaluz
@gonzalodiaz1676
5 ай бұрын
Hoy me paso esto, gracias a este video se lo que tiene mi bicicleta ahora
@NiceBikeService
5 ай бұрын
gracias por tu comentario 😘
@heiaheiaful
5 ай бұрын
Prijatno! Smazki tolko totšno kakih ta lutše postavit?
@NiceBikeService
5 ай бұрын
Hvala za komentar. Ne nanašajte preveč maščobe in ne nanašajte goste maščobe pod zapahi, ker se bodo prijele. Za mazanje lahko uporabite polietilensko vrečko z odrezanim vogalnikom
@heiaheiaful
5 ай бұрын
@@NiceBikeService Nu paren ti dajoš ;) Tolko tšeres google ponjal što govoriš. Ižvini što russkimi bukvimi ne mogu pisat, dolgo poidjot. Horošo, pod dvigušimi materjalam ne daju posla maslo, no što za struktura posla maslo na lager poidjot? Vrjatli silicon? Naverno hot kakova tsvet lagernoi zmas ?
@pattskatoey3139
Жыл бұрын
After going through that effort fixing the freewheel you should have cleaned up the axle and wheel too.
@Weshwey_
2 ай бұрын
Very handy video, would be super useful if my lock ring wasn't completely stuck...
@NiceBikeService
2 ай бұрын
Thank you for watching and commenting, I hope everything goes well with your repairs
@Weshwey_
2 ай бұрын
@@NiceBikeService Thanks, I managed to get the lock ring off by putting the freewheel back on the wheel. I cleaned the parts and reassembled it using Vaseline as a temporary measure until I can get some ball bearing grease. 👍
@lahnaflore2621
4 ай бұрын
This video saved my life!!
@NiceBikeService
4 ай бұрын
glad to be of service! thanks for your feedback 😘
@craigwilliams7476
8 күн бұрын
Great video that….skilful mechanic too 👍
@mirekzabek3571
Ай бұрын
witam, super poradnik - brawo !!! Mam dwa pytania; - jaki smar półpłynny stosujesz ? - gdy odkręciłeś pierścień na górze wolnobiegu widać kólki i wg mnie jest chyba miejsce na jeszcze 2-3 kólki, ale tam właśnie powinno być bez nich, na dole nie jestem pewien, czy jest komplet, czy też powinno być mniej o 2-3 aby się lepiej obracały - tak widziałem u człowieka z usa z serwisu !! Zawsze powinno być wolne miejsce na 2-3 kólki - pozostawione puste !!! Gdy składasz ponownie wolnobieg wsypałeś chyba więcej, bo nie ma już pustej przestrzeni - !!! Jaka jest liczba kólek na górze (34 !), a jaka na dole ?? Poproszę o odpowiedż, dziękuję i pozdrawiam - dobra robota, porządnie zrobione - tak trzymać !! Szerokiej Drogi........... Mirek ja mam wolnobieg retro: Regina Corsa 5 rzędowy 13-24T szosowy i gdy go czyściłem na górze było bez 2-3 kólek, dół jak by cały wypełniony ..??!!
@NiceBikeService
Ай бұрын
Cześć, dziękuję za opinię. Smar do kulek to zwykły gęsty smar do łożysk (Divinol Fett Top 2003), zapadki zostały nasmarowane płynnym smarem do łańcuchów. Nie pamiętam ile kulek jest na filmiku, to było dawno, piszą, że w shimano free running jest 66 kulek, 36 od dołu i 30 od góry, więc od góry jest zauważalna przerwa między kulkami. Być może w Twoim przypadku coś podobnego
@belowzeronautilus2207
Жыл бұрын
Cassette is already closed, you can clearly see it on the teeth... new cassette costs 15€. It then also makes sense to clean the cone, grease and adjust the new one before remounting the cassette
@Muser-w40
9 ай бұрын
Quizás 15€ en el país donde se realizó este arreglo sea mucho dinero. Pero sí concuerdo contigo que es una pena no haber limpiado el resto antes de volver a montarlo...pero de nuevo: habría que ver si el dueño solo podía pagar el servicio que se muestra aquí 🤷🏻♀️🤜🤛
@Pawankumar-tt5so
6 ай бұрын
Your video help full Aap ko meri taraf se dhanyvad ❤
@NiceBikeService
6 ай бұрын
Thank you for your comment! 😍 if you liked this video, share this video with your friends ❤️ it will help the development of the channel! 📈
@ramonuser54321
Жыл бұрын
Serviço de qualidade 👏🏽👏🏽👏🏽👏🏽
@dastrevasparaaluz
Жыл бұрын
Muito bem feito e explicado. Gracias
@Muser-w40
9 ай бұрын
Muy buen video. Muchas gracias por compartirlo 🤜🤛
@NiceBikeService
9 ай бұрын
¡gracias por tu comentario! Comparte este vídeo con tus amigos, ¡ayudará al desarrollo del canal! 📈😘
@joseortega9633
10 ай бұрын
Excelente 👌 , me sirvió muchísimo
@NiceBikeService
10 ай бұрын
gracias por tu comentario 😘
@AmalKaru-i2f
9 ай бұрын
what are the tools you used for removal of the freewheel. Please mention all the tools. Many thanks
@NiceBikeService
9 ай бұрын
that's what they're called, freewheeling tools.
@basricokicli3992
11 ай бұрын
çok güzel sunum çok yararlı.Teşekkürler..
@NiceBikeService
11 ай бұрын
Geri bildiriminiz için teşekkür ederiz!
@vikramthakorvikramthakor6184
6 ай бұрын
Thank you so much❤❤❤❤ 👏👏👏🙏🙏👍👍👍
@NiceBikeService
6 ай бұрын
Thank you for your comment! 😍 if you liked this video, share this video with your friends ❤️ it will help the development of the channel! 📈
@aliabid4845
2 ай бұрын
thanks it helps me a lot
@NiceBikeService
2 ай бұрын
glad to be of service! thanks for your feedback 😘
@KKoji
8 ай бұрын
After assembling the hammers, it is best to change their position. The wear on the part can cause different situations, so when you change it you will know if they open more. You should put grease inside the body, and be more generous with bearing grease. don't put it out. it is a good idea to remove a thin washer and lock the nut to remove play.
@NiceBikeService
8 ай бұрын
thanks for the advice ! 😘
@snakerstran9101
8 ай бұрын
DO NOT remove those thin washers willy-nilly. They set the spacing so the ring nut can be tightened securely without binding or rubbing on the moving parts. And the ring nut must be tightened very tightly as it tends to spin loose while riding and can loose the bearing balls.
@KKoji
8 ай бұрын
@@snakerstran9101 to remove play.
@peteturner8493
7 ай бұрын
What about the missing ball bearings and was high temperature bearing grease used, your 'A' typicall KZitem video leaving a lot to be desired sigh....!
@aaronayala8325
10 ай бұрын
Muy bueno el video Ahora mi pregunta es, cuanto debería cobrar por este servicio?
@NiceBikeService
10 ай бұрын
Aproximadamente un 50% más caro que el mantenimiento de los casquillos🐱
@coronelpliskin3648
9 ай бұрын
como se llaman y que medidas son las bollitas que se ven el en minuto 3:13?
@NiceBikeService
9 ай бұрын
tiene el nombre. Libre albedrío. No puedo decirte las dimensiones.
@technomindof6878
Жыл бұрын
The wheel still sounded very loud on the spin test,like bearings grinding into each other,maybe more grease maybe?
@fbevera
7 ай бұрын
What kind of grease was that being used in the syringe?
@NiceBikeService
7 ай бұрын
calcium divinol grease
@jusseffochoa656
3 ай бұрын
Fábricas ponen baleros de bolitas en Especial chinas un tené campialas por rodamientos o baleros abierto con anillos es mejor calidad. Buen trabajo.
@joecanuck3751
Жыл бұрын
If the bearings are going to be reused, I'm not sure I'd use a magnet on or near them. The risk of magnetizing them is too high and then they will attract dirt that wont wash off. Thanks for sharing.
@h11drax59
Жыл бұрын
Then use a light plastic cover over them 🙂
@GenevaSevenfold
Жыл бұрын
I meeeaaaan they’re gonna get dirty anyway lol it’s a mountain bike
@totokkris4110
Жыл бұрын
Why it should be so complicated just to pull out those steel ball. Even it will be inducted by magnet, it just too weak. Anyway it would not be triggering nuclear explotion. 😂😂😂😂
@mikegraham4059
Жыл бұрын
Lollolololollolol. Yeah buddy, absolutely no idea huh?
@MrAdf1984
11 ай бұрын
Полностью согласен, я никогда не намагничиваю шары.
@CliffordKylie-g6i
12 күн бұрын
Bearings can be reused if there isn't a flat spot, taking these apart a bearing will go missing and would have to get new ones, a magnet can be used to set them in and grease over them
@jurek0512
8 ай бұрын
How many Bering balls you put first and second?
@NiceBikeService
7 ай бұрын
Different freewheel models can have a different number of balls. Shimano can have 36 at the bottom and 30 at the top
@aepdadang7456
Ай бұрын
If it is like this, can it still be opened to the next stage, for example using a sprocket key?
@aepdadang7456
Ай бұрын
Which way to open it if possible if it is to the left it is so difficult for me to do it
@NiceBikeService
Ай бұрын
The freewheel itself is unscrewed from the wheel in an anti-clockwise direction, and the locking ring in a clockwise direction
@volodyagord3834
Жыл бұрын
Чудовий канал! Хай щастить! 😉Danke sehr.
@lepwokeuplikethis1851
Жыл бұрын
Hey! I have a question, can we put a fixie cog on that hub? because there is a thread there, I thought I could attach a fixie cog
@NiceBikeService
Жыл бұрын
Good afternoon, for such bushings there are freewheels with a thread for 1 star. Maybe the one like yours will work, but we haven't checked.
@lasselyhne-hansen9338
8 ай бұрын
Thanks!
@NiceBikeService
7 ай бұрын
Thank you for your comment! 😍 If you liked my videos ❤️, support the channel financially 💰🙏. Use the "Membership" / "Sponsor" function on KZitem ✊😘
@StacyKoinva
7 ай бұрын
I would to ask would this be possible for an Ambush bike? My rear tire is the same and I trying to fix it.
@NiceBikeService
7 ай бұрын
If you have a freewheel, then everything is the same, you can fix it
@StacyKoinva
7 ай бұрын
@@NiceBikeService I took it apart and didn't see any of the two square things where the spring would be and the magnets balls
@KRACK.561
Ай бұрын
What is the tool called which you have used to open the cassette? And which lubricant do you use?
@NiceBikeService
Ай бұрын
Thank you for your comment. The tool is called Freewheel Remover. The grease is Divinol Fett Top 2003, just don't use it on the pawls as it is thick
@11GDR
Жыл бұрын
Зачотна кочерга для зйому тріскачок 😃👍
@LetsDiscoverMauritius
9 ай бұрын
How many bearings are there on top and bottom?
@NiceBikeService
9 ай бұрын
There are different designs of freewheels, in this one there are 36 balls at the bottom, 30 at the top, 66 in total
@yokanshree4621
4 ай бұрын
Is that a steel pipe
@NiceBikeService
4 ай бұрын
thank you for your comment! 😘
@timbocando
10 ай бұрын
THANK YOU!
@NiceBikeService
10 ай бұрын
thank you for your comment! Share this video with your friends, it will help the development of the channel! 📈😘
@maddax6372
10 ай бұрын
Excellent 👍
@NiceBikeService
10 ай бұрын
❤️
@rudragurung8407
6 ай бұрын
What happens when then spring is broken? And alternative to DIY stuff!?
@NiceBikeService
6 ай бұрын
Then it's a complete replacement
@dranurag22
11 ай бұрын
general size of ball bearings needed in a freehub?
@NiceBikeService
11 ай бұрын
Usually use balls with a diameter of 3 mm
@ManuelGonzalez-rn7oq
3 ай бұрын
Gracias por el vídeo
@NiceBikeService
3 ай бұрын
¡Gracias por tu comentario! 😍 si te ha gustado este video comparte este video con tus amigos ❤️ ¡ayudará al desarrollo del canal! 📈
@anakrantauorg
Жыл бұрын
Terima kasih tutorialnya
@ioioytbd19
Жыл бұрын
your video benefitted me
@killeroflegends1
9 ай бұрын
Tenia ese problema, pero lo deje pasar bastante tiempo y ahira los aros y la pieza principal estan pulverizados. Mi pregunta es, cuando se compra un piñon nuevo vienen todas esas piezas? Incluso los balines?
@NiceBikeService
9 ай бұрын
por supuesto, hay una rueda libre con todos los piñones del casete de la bicicleta.
@makantahi3731
6 ай бұрын
cost of repair is 20€, cost of new part is 15€
@NiceBikeService
6 ай бұрын
Yes, but when replacing the cassette, you will also have to replace the chain and cranks or their stars, which is much more expensive
@makantahi3731
6 ай бұрын
@@NiceBikeService yes,that is because bike owner is "poor" and now he do not wanna pay too much but later he will have to pay more, because if you have to replace chain because new cassette, it means that chain is worn and it will destroy front chain ring, but you do not have to replace front rings if you now replace chain and cassette because if front rings are not too much worn, you can reshape teeth and prolong its life
@angelocordovil
4 ай бұрын
Faltou limpar a corrente e a base onde a roda livre se enrosca no cubo junto aos raios, não ficou serviço completo. Ou seja faltou fazer limpeza completa no cubo
@NiceBikeService
4 ай бұрын
obrigado pelo conselho! 😘
@R3FL3X84
11 ай бұрын
is that a shumano tz freewheel ? is sounds so quiet :)
@NiceBikeService
11 ай бұрын
Yes, it's a freewheeling shimano, but it's unknown which series😺
@Macro5357
4 сағат бұрын
este man si sabe
@gaborbakos7058
2 ай бұрын
Not necessary to disassamble. Pour hot water on it for 10 minutes it will release the stuck part and dissolve the hardened grease.
@NiceBikeService
2 ай бұрын
thanks for the advice ! 😘
@Abhishek__Parihar
9 ай бұрын
it is very hard to find a cycle repair shop in my city and only few of them repair gear cycle's and i am sure none of them will a repair gear cassette
@NiceBikeService
9 ай бұрын
Anything can happen) if a person watches my video tutorial, they can definitely do it again.) Sometimes, it is necessary to repair one part so that you don't have to replace the whole drivetrain of a bicycle.
@Abhishek__Parihar
9 ай бұрын
@@NiceBikeService yeah, you did great work
@NiceBikeService
9 ай бұрын
thank you for your comment! Share this video with your friends, it will help the development of the channel! 📈😘
@Depoox
Жыл бұрын
Jakiego klucza używasz do klucza do wolnobiegu, to 21? I jak go zamocowałeś do rury?
@anonymously241
Жыл бұрын
R you reusing old bearing?
@euzebiuszkarpacki3810
4 ай бұрын
Czy tam nie brakowało jednej kulki? Pytam bi jak składałem taki stary wolnobieg to też mi brakowało kulki i teraz nie wiem czy tak ma być czy się zgubiła...
@Ezen73
10 ай бұрын
what grease do you use
@NiceBikeService
10 ай бұрын
grease - shimano! Share this video with your friends, it will help the development of the channel! 📈😘
@OybekNormurodov-c6d
6 ай бұрын
Ok👍👍👍 uzbekstan
@NiceBikeService
6 ай бұрын
👋😸
@RCh1
Жыл бұрын
That's right. Did it many times...
@chemistrywithnick530
Ай бұрын
What is the size of the steel ball
@NiceBikeService
Ай бұрын
3.17 mm or 1/8 inch
@keliargabesar2039
Жыл бұрын
Please, how do you deal with the freewheel not being strong when climbing the sound of the trek track?
@bachmtb7276
Жыл бұрын
Hướng dẫn như nầy là khó tiếp thu lắm, trước tiên bạn phải có chủ đề dành cho líp vặn, hoặc líp thả vì người xem họ chưa rành ạ.. còn như mình thì khỏi xem..
@jakub_qba
10 күн бұрын
It this job worth it? The freewheel is about 10$.
@rodrigomarzulo1874
10 ай бұрын
É bem assim essa mantagem de roda livre
@NiceBikeService
10 ай бұрын
😉😺
@PeaceDarusNi
Жыл бұрын
Доброго дня,можете підсказати яка трансмісія краща для велосипеда 18кил 21рама і 29 тіпа мтб, щоб проїхати мені хотя б 200 метрів то лиш з горкі на дорогах треба постійно крутити трансмісія напевно найдешевша стоїть,думаю перейти на касету,але такій апгрейд на новий велосипед виходить напевно 😅 є в мене якісь варіант? Велосипед norman pegas/pegasus
@PeaceDarusNi
Жыл бұрын
@@NiceBikeService взагалі не хватае швидкості даже по прямі дорозі,десь 15км може і розганяю але такій темп виснажує 🤷😭
@carljeromeaquilos8725
Жыл бұрын
Man how do you fix a sprocker that has a grinding noise when i freewheel, I just cleaned it with wd40 then put some chain lube on the seems, but it still makes grinding noise as if it is dry
@beniligadoemtudo1450
Жыл бұрын
Otimo trabalho amigo
@burhanbakshi9982
Жыл бұрын
What is the cause of this problem? I have same issue with my cycle.
@giannimagni5380
25 күн бұрын
Grazie, molto utile.👍
@NiceBikeService
24 күн бұрын
Grazie per il tuo commento! 😍 se ti è piaciuto questo video, condividi questo video con i tuoi amici ❤️ aiuterà lo sviluppo del canale! 📈
@SqBike
Жыл бұрын
Kasetę bym czyścił tak starannie lecz wolnobieg już nie, lepiej nowy byłoby kupić, ake szanuje za pracę 👍
@irfanaazher2050
7 ай бұрын
Thanks u for this 😢
@NiceBikeService
7 ай бұрын
thank you for your comment!
@isaiahwelch8066
8 ай бұрын
One tip for using a freewheel remover tool: DO NOT do as this guy, and many others do, which is use a taped offset box-end wrench inside of a pipe to remove the freewheel. Instead, get a shallow-well 1/2"-drive socket and 30"/36" breaker bar. Tasks like removing freewheels from rear hubs are no different than removing lug nuts from a car wheel by hand. Because yes, you need the torque and leverage to break the freewheel loose -- but use tools that are the right tools for the job whenever you can, in situations like these. Because breaker bars and impact sockets will not break under normal use, unless they are made from very, very poor or cheap materials. And buying a breaker bar with an impact socket set, for this kind of work, will last you a lifetime.
@NiceBikeService
8 ай бұрын
interesting comment 👍
@jersonmarticorena1999
8 ай бұрын
Llaves especiales para gente especial. Soluciones variadas y creativas para gente versátil.
@nagasumi-sempai6740
7 ай бұрын
Como se llama el líquido que hechas
@NiceBikeService
7 ай бұрын
Si te refieres a la grasa, es grasa de calcio divinol
@irfanaazher2050
7 ай бұрын
I was also having the same issue
@NiceBikeService
7 ай бұрын
glad to be of service! thanks for your feedback 😘
@Паша-б6д
Жыл бұрын
how to put the steering wheel and grease
@deniwidiana6370
4 ай бұрын
Ball bearing size? Please
@NiceBikeService
4 ай бұрын
3.17 mm or 1/8 inch
@potato2531
11 ай бұрын
What if i dont gave that tool to remove the casette?
@NiceBikeService
11 ай бұрын
It is impossible to remove the cassette without this tool. Better buy it, it is not expensive and is sold in any bike shop or can be ordered online
@MegaDmachine
21 күн бұрын
On my bike I just taped the the 2 holes with a nail like you did and mine came off@@NiceBikeService
@sebastiansalinas5244
11 ай бұрын
Que tipo de grasa se usa?
@NiceBikeService
11 ай бұрын
Utilizamos grasa cálcica espesa, disponible en muchos fabricantes.
@chanrite1
Жыл бұрын
thank you
@jaydenrichards8815
Жыл бұрын
My pawls aren't bouncing up to hook in the teeth , I cleaned it and everything but idk why its not bouncy anymore , any advice ?
@larrydaniels8976
9 ай бұрын
Probably put the pawls in backwards.
@balasairocker6407
3 ай бұрын
Perfect ❤
@NiceBikeService
3 ай бұрын
Thank you for your comment! 😍 if you liked this video, share this video with your friends ❤️ it will help the development of the channel! 📈
@eduardosavala1140
10 ай бұрын
Si combine cuando aun tiene un 50% de vida si no es asi mejor cambiarlo por una nueva ✌️👊🏼
@NiceBikeService
10 ай бұрын
Entonces habría tenido que cambiar además la cadena y las bielas
@li-on1
Жыл бұрын
What tool did you use to remove the "lockring"? I need one with 12 teeth and 30 mm diameter..
@li-on1
Жыл бұрын
@@NiceBikeService Thanks for the answer but I meant the tool to disassemble the first cogs? The one thats cylindrical. A usual cassette removal tool is too small.
@KINGTAPOUT_RELOADED
Жыл бұрын
Parktool FR-7 12 notch
@li-on1
Жыл бұрын
@@KINGTAPOUT_RELOADED Thanks for the info. Unfortunately, this tool is only 23 mm in diameter and not 30 mm. Im searching for a 30 mm to actually "open" the freewheel. To do so, the outermost cogs need to be removed first.
@duniageme-gm7us
11 ай бұрын
Kak kriwil buat sepedah aviator ukuran 20 sama kah
@NiceBikeService
10 ай бұрын
👍
@pvtmiller21
2 ай бұрын
I might as well get a new bike at this point
@NiceBikeService
2 ай бұрын
Extravagant, but good.😺
@reverse_rain
Жыл бұрын
Невже лагодити її ( для замовника) дешевше аніж замінити?
@viktorsvetlov80
Жыл бұрын
What kind of lubricant do you use(green) ?!
@CTZN1
10 ай бұрын
yeah i wonder that too
@x21gokartracing
5 ай бұрын
I have done maintenance to front and rear wheels, crank, front neck, to eliminate wash out of the grease I have always used marine grease with no issues.
@milindasenarath
Жыл бұрын
my freewheel completely gone silent after a service. now i dont hear any click. is that a problem ? bike rides fine
@milindasenarath
Жыл бұрын
@@NiceBikeService i live in Srilanka . in here temperature is always around 25-33c. no winter.
@Rabe1907
7 ай бұрын
8 fach Schraubkranz ca. 11,95 €. Lohnt sich diese Arbeit denn ?
@NiceBikeService
7 ай бұрын
In den meisten Fällen ist es das nicht wert. Der Austausch der hinteren Ritzel bringt jedoch den Austausch der Kette und sogar der Kurbeln mit sich, so dass es manchmal kostengünstiger ist, den Schraubkranz zu reparieren
@francoisaacfic
Жыл бұрын
En las bolas, por arriba lleva una aro de metal y después va la tapa
@letspwa
Жыл бұрын
whats that grease?
@chernytandem8903
Жыл бұрын
А чи є сенс сенс? бо тут ціна роботи скоріше всього дорівнює вартості трещітки
@chernytandem8903
Жыл бұрын
@@NiceBikeService а скільки обійшлась робота? Які пробіги трещіток на кур‘єрських велосипедах?
@chernytandem8903
Жыл бұрын
@@NiceBikeService я так і прикидував. При тому що нову трещітку можна за 350-400 пошукати, або легковживану і того дешевше
@chernytandem8903
Жыл бұрын
@@NiceBikeService ну в принципі на відео зірки не прямо вбиті) просто розтягнутий ланцюг швидше зношував би вільнобіг) або якщо брати вживану то можна було б зразу отримати працюючий варіант з трохи меншим зносом за ціну ремонту)
@chernytandem8903
Жыл бұрын
@@NiceBikeService 😂
@ProfessorSnape22
2 ай бұрын
U never explained what you sprayed
@NiceBikeService
2 ай бұрын
This is isopropanol
@severeflipper
2 ай бұрын
Or you can use degreaser
@severeflipper
2 ай бұрын
@@NiceBikeServicespell check: isopropyl
@RexArroza
Жыл бұрын
What was the green stuff you use
@codykorzenowski6888
5 ай бұрын
Lube, it’s not always green but they all do the same thing the lube I have is red
Пікірлер: 368