@@FritzRamos fritz hey there again! I’m gonna tackle this mount issue tomorrow and I wanna know when you use the engine brace and you start tightening down that middle hook that hooks to the tow hook, does it lift the engine like yours is doing in the vid? Also do you want to tighten down that middle prong that spins down onto the middle of the brace as tight as possible?
@DuckMcDuckinson
2 жыл бұрын
@@FritzRamos also the tow hook you have, does it screw all the way down into the threads ontop of the engine? Because I have the same hook and it’s a pain to keep tightening it down and it’s still not all the way threaded in. Or do you just tighten it down as much as you can even if there are a few threads that aren’t in?
@MicKnown
2 жыл бұрын
I've watch all related videos of this repair and this is the most straightforward, detailed, and best example of how to perform this repair! Good Job Man
@FritzRamos
2 жыл бұрын
Thank you. Glad you found it useful.
@DuckMcDuckinson
2 жыл бұрын
@@FritzRamos hey fam can I use rhino ramps to keep the car elevated?
@FritzRamos
2 жыл бұрын
@@DuckMcDuckinson I don't see why not
@DuckMcDuckinson
2 жыл бұрын
@@FritzRamos alright thanks fritz!
@DuckMcDuckinson
2 жыл бұрын
@@FritzRamos hey fritz just a quick question, I just drive the car on the ramps then use the engine brace? I know it sounds stupid to ask this question.
@1prodbyhd
2 жыл бұрын
I just completed this job last night and let me tell y’all, it ain’t no where near as easy as it looks 😂
@baby_king9ine
8 ай бұрын
I had to take off the top strut brace so I could lift the engine high enough to put in new mounts 😭
@sspade.1
2 жыл бұрын
Really nice video. From another F30 enthusiast... great job. Impressive!
@FritzRamos
2 жыл бұрын
Thank you. Nice to meet a fellow enthusiast 🤝
@hyde_official
2 жыл бұрын
The how to clean the engine bay info pop up was a brilliant thought. I was like hmm he did it and the info popped up. Lol
@FritzRamos
2 жыл бұрын
Thank you for that input! What you just described was what I was hoping to achieve. Provide people with information at a relevant point of the video without taking away from the current topic. 🤜🤛
@willkilliam258
2 жыл бұрын
Holy **** now i know what that noise is, glad i decided to look at your vids.
@FritzRamos
2 жыл бұрын
Glad I could help
@lazarus8501
17 күн бұрын
Thank you. I couldn’t find the torque specs anywhere in my service manual.
@polvereoro86
2 жыл бұрын
@7:10 perfect 👍🏻,, i always do that test to check the mounts , great u did it before @1:20 and after
@AlexMelendez
Жыл бұрын
Didn’t even realize I wasn’t subscribed yet, I see your videos all the time!! I am subscribed now 100%
@thomasdiersch1181
2 жыл бұрын
again a great demo and super clear instructions
@FritzRamos
2 жыл бұрын
Thanks Thomas!
@Pa-hy1te
2 жыл бұрын
Even I have a N55 I watched the full video. Great content.
@FritzRamos
2 жыл бұрын
Thanks! Hope it was helpful in your case 😅
@Pa-hy1te
2 жыл бұрын
Well it was indeed. Got the motivation that I can manage the job on my own :)
@FritzRamos
2 жыл бұрын
@@Pa-hy1te You got this 👍
@legioner9
Жыл бұрын
Very nice video. Sooo clean (literally) and straight to the point.
@FritzRamos
Жыл бұрын
Thank you!
@dicomesolaru1189
10 ай бұрын
Hi very nice video! Straight to the point. Quick question: do you recommend replacing the gear box mounts at the same time or do they last longer? Thanks!
@skogan7065
Жыл бұрын
Fritz I love you man best video on these out there thanks a ton!
@caboose6411
2 ай бұрын
My engine shakes, but the mounts were replaced when I put a new engine in my 328i. Honestly don’t know what it could be, but besides that I’ve had zero issues with the car.
@joinsouthwest
Ай бұрын
Great vid thanks! Did you not have to remove the charge pipes to gain access to driver side? Thanks!!
@dax313xab
8 ай бұрын
Thank you so much!
@giowilliams7855
2 жыл бұрын
When he said “it’s probably not your engine or your motor” 20 seconds into the vid I was skeptical 😂.
@scottfriesner1538
2 жыл бұрын
Nice video Fritz!!!!
@DaMiAn3x4FUN
8 күн бұрын
Did you check or replace the Transmission mount too?
@miketigerpool
2 ай бұрын
Great explanation. However, harbor freight engine support is a trash 🗑️ and the nut/screw stuck when the engine is underload. 30 min job is becoming in a 3 hours. Please purchase a good quality hook and engine support.
@zadeh79
2 жыл бұрын
All the shops around me are quoting 7 hours for this, around $1100. Seems pretty ridiculous.
@FritzRamos
2 жыл бұрын
Really?! I think I did this in less time while filming
@Tom051981
2 жыл бұрын
I have a 2014 BMW X1 sdrive28i I get a vibration sound on the highway doing 70 to 80 MPH only on highway at those speeds
@jesseli1408
Жыл бұрын
You make it look easier than what other people have shown. I get a shake for about 30 seconds through the cabin on cold start and its fine when I accelerate, would this still be the engine mounts?
@FritzRamos
Жыл бұрын
That might be something else. The motor mounts would be stiffer when the car is cold
@Alecsc02
6 ай бұрын
I am hav8ng problems with vibration when idle, any ideas?
@eliaspapas3011
Жыл бұрын
Hey just went through it the “supercharger” wine is the timing chain going
@erictsaikiki
2 жыл бұрын
Great video. How many miles does it need to change? Thanks.
@chrishayes5996
Жыл бұрын
How similar is this to the steps to replace mounts on an F30 340i? Anything else to remove?
@TomatoWithARifle
8 ай бұрын
how many miles did you have on the car when you did this
@terrancemiller6678
Жыл бұрын
are they same part for boths sides??
@TomatoWithARifle
8 ай бұрын
is it the same for the 328d n47?
@terrancemiller6678
Жыл бұрын
are they same part both or diifernt each side?? then part number also thanks
@FritzRamos
Жыл бұрын
Different. N20/N26 Motor Mount (Right): bit.ly/3mlU3O9 N20/N26 Motor Mount (Left): bit.ly/3D8Rrde
@jonathanmunoz9417
11 ай бұрын
What size torque wrench did you use? Is there a link for that?
@zadeh79
2 жыл бұрын
Is the process similar for the G20 330i?
@SofiaIsaiah
Жыл бұрын
Would you recommend the e30 tow hook with a g20 engine 2019?
@jilano6376
Жыл бұрын
Awesome Vid. Pinoy ba? Saan mo?
@gail6904
Жыл бұрын
what do u mean rubber pad should face rear car? which part ???confusing here
@FritzRamos
Жыл бұрын
middle
@Oockeshoek
9 ай бұрын
What's the difference between the E30 tow hook and the stock F30 one that comes with the car?
@FritzRamos
9 ай бұрын
The E30 tow hook is slimmer
@Oockeshoek
9 ай бұрын
@@FritzRamos ah thanks! Can the stock one not be used?
@FritzRamos
9 ай бұрын
@@Oockeshoek as long as you can tag it in all the way without pinching wires your fine and be careful when pulling it out
@Oockeshoek
9 ай бұрын
@@FritzRamos thanks!
@Jwips.
2 жыл бұрын
Do you have to drop the subframe
@FritzRamos
2 жыл бұрын
Nope
@Jwips.
2 жыл бұрын
@@FritzRamos mannn lol I got an estimate for 1100$ for m235i to replace the motor mounts because they said they have to drop the subframe.
@FritzRamos
2 жыл бұрын
@@Jwips. I mean, I guess you could do it that way. I would just use a engine support and if I really needed to, slightly lower the subframe but there shouldn't be a need to completely drop it if you don't want to. Where are you located?
@Jwips.
2 жыл бұрын
@@FritzRamos Las Vegas
@FritzRamos
2 жыл бұрын
@@Jwips. hit me up on IG @vroomtuber and I'll see if I can put you in contact with my friend
@1prodbyhd
2 жыл бұрын
How long this take ?
@hussainkhambata3869
2 жыл бұрын
Is this same for f22 m235
@FritzRamos
2 жыл бұрын
It's similar. I'll do one for the m235i in the future
@alexkovacs6343
2 жыл бұрын
Hi, This can cause the metally vibrating sound as well at the start, or its the turbo wastegate flaps loose? Thank you!
@eshvirg5453
Жыл бұрын
Did you figure it out bro?? I have a metally vibrating sound too
@pascalsiciliq3601
Жыл бұрын
How manu kilometres ??
@wilmay3101
2 жыл бұрын
Hey man, new subscriber here and thank you for the detailed video.. i have a question, not sure if my issue is the same but my car vibrates and resonates throughout the body, inside the cabin, doors, steering wheels, pedals and muffler. The shake is mild and its the same wether the engine is on idle, drive or reverse. Do you think the engine mounts are the culprit? Thanks heaps.
@DuckMcDuckinson
2 жыл бұрын
Man sounds like it. I had a high pressure fuel pump go out on me and when it threw the drivetrain malfunction, whenever it went to a stop, the engine would vibrate crazy!
@bijuc6157
Жыл бұрын
Fritz, how long did it take you to do this project? Also would the steps be the same for a F36 435i xdrive gran coupe?
@FritzRamos
Жыл бұрын
With filming, about 4 hours so maybe cut that in half for yourself. I would imagine that the overall process is the same, but with slightly less working space on the bottom side.
@bijuc6157
Жыл бұрын
One more question, did you have to lower your sub frame? (I don’t think you did based on your video but just wanted to make sure) (Some posts in the forums talk about needing to lower the sub frame) Also I appreciate the quality and detail of your videos! Thanks
@tugrulbey3095
Жыл бұрын
@@bijuc6157 if youre raising the engine, no need to lower subframe.
@bijuc6157
Жыл бұрын
@@tugrulbey3095 thanks for your response!
@jakecollins322
2 жыл бұрын
is this same concept for f32 with n55?
@FritzRamos
2 жыл бұрын
Yes the overall steps, concept, and setup are similar.
@zadeh79
2 жыл бұрын
@@FritzRamos what about for G20 330i?
@terryc9245
2 жыл бұрын
Hi, do you have the Video before and after comparison?
@FritzRamos
2 жыл бұрын
Sorry, no. Just the before and after that you see in the video
@Woof1022
2 жыл бұрын
Is the process the same for 2 series?
@FritzRamos
2 жыл бұрын
Exact same for the 228 but a little less space. The m235i is similar with a few differences. I'll make on for our cars later on
@Woof1022
2 жыл бұрын
@@FritzRamos ok, also, is your 235 X drive? I’ve noticed some of the processes for a few of your tutorials are a bit different when I attempt them on my x drive 235
@Tluchak14
2 жыл бұрын
@@FritzRamos looking forward to that video! I had the same question. I know a company called Revshift makes some for the F8x, F3x, and F2x cars, so it would be interesting to hear your take on their product when you make the video.
@gabemartinez1012
2 жыл бұрын
I replace mine at 77k and now its at 107k And when I put it to drive i feel more vibration and even more when I turn on my AC. Its possible the motor mounts when bad that soon? I took it to a mechanic and he said my car is at 100k what would I expect. BTW my is an f30 238i 2016.
@DuckMcDuckinson
2 жыл бұрын
If you bought it from FCPEuro you’d have a lifetime warranty on the part.
@Dee.htx1
Жыл бұрын
Would this cause a Drivetrain Malfunction code to pop up on BMW ?
@diewlaylomei
Жыл бұрын
Yours don't look that bad
@Enthusiast_Plus
Жыл бұрын
Would this be the same for xdrive?
@FritzRamos
Жыл бұрын
Similar. Access might be a little less on the X-drive.
Пікірлер: 105