Seen a few of you have been asking about the Cricut calibration sheet. There is a link in the description but dropping it here as well 😊 Hope this helps! help.cricut.com/hc/en-us/articles/360009424974-Calibrating-your-machine-for-Print-Then-Cut Rebecca x
@projectcreate9157
3 жыл бұрын
Thank you for the tips - we should NOT have to work this hard to use a function we bought the machine for! : (
@sunshinelifeco
3 жыл бұрын
Oh my gosh right???? So aggrivating!
@browaddict6667
3 жыл бұрын
Agreed! What is the big black box around the design there for then? It doesn’t make any damn sense 😩
@beinok
2 жыл бұрын
Agreed.. this is ridiculous!
@anadawson9305
2 жыл бұрын
Seriously, this has been a total nightmare.
@ynahbelletv3588
2 жыл бұрын
I agree 😢
@ruthlangedesign3778
3 жыл бұрын
So glad to have finally found people who are having the same problem as I am. I totally agree.. It should NOT be this hard!! Thanks for your tips
@RebeccaYates
3 жыл бұрын
Hi Ruth, I know, it's mad. I can't believe how many people have watched this video either .... and that these problems haven't been sorted properly yet by Cricut. Really hope you get it working and can focus on designing! x
@laurengillispie-walker8546
2 жыл бұрын
These are great tips. Unfortunately, I am still not able to get it to work. I am definitely returning the machine as it has completely defeated me from even wanting to continue to try. Wasted so much money on materials and ink for my printer. This shouldn't be this difficult.
@TheNotepadEmporium
2 жыл бұрын
I cant tell you how grateful i am for this video. I was seconds away from throwing my brand new Maker 3 out of the window, i spent all morning trying to cut one sheet properly. I finally got it, thank you so much
@whatgirlsrmadeof
7 ай бұрын
GAME CHANGER TIPS!!!! Thank you so much for this video!!! I was so close to giving up on Print then Cut. I'm a tech-savvy girly, but I couldn't for the life of me get this to work for me. Turns out, I needed to turn off the light and align the mat left. Thank you for saving my faith in my Cricut!!! 🙏
@asfarhvesda
Жыл бұрын
first of all thank you soo much Rebecca! im a maker from Singapore and im on my 3rd machine hahahahaha i thought it was a machine problem but it was not. I accepted fate and always hand cut my stickers after cutting it on my cricut to get that even look as it is always slightly off. After following these 3 steps it was perfect! like actual perfection not even slightly off!!!! 3 things helped me solved the problem 1st using the pdf you provided printing it in A4 ACTUAL SIZE!!! 2nd cover the top lid as my room is fully lit with led lights everywhere that definitely helped 3rd it wasn’t listed in the video but a friend of mine recommended it. Place baking paper on top of your mat (sticky side up) and iron that mat on low, your mat will be straight no longer warped making it easier to align it to the left when loading the mat into the machine I hope these 3 steps will help anyone struggling to get a perfect cut.
@quietcat167
3 жыл бұрын
Thank you so much!!!! I was about to throw mine in the trash!! Needless to say, cricut will not be my next cutting machine, but I can keep mine a little longer. Holy cow what a pain.
@browaddict6667
3 жыл бұрын
I agree!
@daniellemarshall6830
2 жыл бұрын
Amen!!
@meigasdolume
Жыл бұрын
OMG you saved my life, first of all my calibrations never worked, did the pdf thing with US paper size (I am in Spain) and that did it. The other thing is that for 2 years I have been fighting with my cricut with different lights etc because it always had problems reading the lines, today I closed the lid FIXED! amazing how simple it was LOL. Thanks so much one of the most useful videos!
@archiewinter
3 жыл бұрын
I just tried some of your tips and got it to work first time. The main thing for me was to print to PDF first and then print full size. I didn't select a paper size but the cut was perfect. How you don't have more subscribers is beyond me. Great video, nicely delivered and you solved a problem that was driving me slightly mad :) thanks!
@RebeccaYates
3 жыл бұрын
I’m so pleased this helped, I am honestly shocked at how many views this has had! I had no idea so many people were having problems! I just thought I would put something together to try and help as I was so frustrated myself!
@tchili1
Жыл бұрын
@RebeccaYates Not kidding when I say you have given so many of hope knowing how to correct these problems. Never realized there could be so many variables. The one about the light could very well be one of my problems here because I noticed when it is late and the ceiling light is on, it almost always begins to cut off center. Thanks sooooo much!
@TexasKid747
2 жыл бұрын
After many calibration attempts and wasted sheets and ink, I discovered two additional steps that fixed my sticker alignment issue. One, my printable vinyl media was rarely flat in the printer feed tray like a sheet of copy paper would be. The humidity makes it curl a bit and it would not feed straight. Then, after printing, I started measuring the distance from the left media edge at the top and bottom to the Registration Box and I discovered that many times it was off by 1 or 2 millimeters. When I adjusted the placement on the mat to make the registration box even with the mat side alignment line, it cut perfectly time after time even though the paper is not aligned. Good Luck! Cheers from Texas.
@smarie7655
3 жыл бұрын
Thank you sooooooo much! I was almost in tears with all the paper I was wasting! The force firmware update, PDF save then print, and closing the top of the Cricut machine worked!
@elizabethkahrs3581
2 жыл бұрын
Wow! I went so far as to send my first machine back to Cricut (after spending hours trying to calibrate and having to make a long video of myself attempting to calibrate my machine to send Cricut). They sent me a new machine (which I am extremely grateful for!) but the new one also would not calibrate correctly. I just turned off all the lights in my room and it worked perfectly. I'm a little surprised the tech at Cricut I talked to didn't suggest that, but it worked and I'm overjoyed! :) Thank you a million times, Rebecca!
@RebeccaYates
2 жыл бұрын
Yay! I’m so pleased you got it sorted! Yeah this video should be theirs! Haha!! But I thought it was important to try and share to help out if I can! Rebecca x
@niomistevenson4315
Жыл бұрын
Can I ask how long u had ur cricut for I've had mine for 2 years am just wondering would they change mine
@wen-xb6jx
Жыл бұрын
Thank you so much!!! I have been fighting with my calibration for 2 days until I found your video.
@cherylbronner5010
2 жыл бұрын
I was pulling my hair out as well!! One day it worked perfectly, then there was an update. Worked awful after that. Tried recalibrating what seemed like 50 times. Came across your video and went through your suggestions. Uninstalling and reinstalling is what worked for me. Thank you so much!!!
@RebeccaYates
2 жыл бұрын
Ah that sounds so stressful! Glad one of these tips worked! Rebecca x
@TBruce1380
2 жыл бұрын
Same thing is happening to me everything worked perfectly until I updated last week. Going to uninstall and reinstall to see if that works.
@sunshinelifeco
3 жыл бұрын
Thank you for this I was about to drive hours to the nearest mountains and just huck my Cricut off a cliff🤣 I figured it out before finding your video today but saving this because I know I will forget how to do this🤦♀️
@EvansStaff007
11 ай бұрын
this video SOLVED my issue and HELPED ME greatly and saved me from much frustration. THANK YOU so very much for creating this video!
@eboy924
3 жыл бұрын
This helped us tremendously and just save me from going through 20 more sheets of paper! Thank you for collating all this helpful information into a quick video!
@melhanddrawn2423
2 жыл бұрын
Oh my word Rebecca! I can't thank you enough this Cricut almost went out of the window! Cricut help pages do not tell you the A4/US paper confusion! Life saver thank you!
@grandmacricut6405
Жыл бұрын
Your video has been very helpful. I have now calibrated my Cricut Marker using your advice and successfully done my first Print and Cut that has worked out very well. Thanks.
@miabrown1786
7 ай бұрын
Thank you! Way more useful than Cricut's "Customer Service."
@albroadhurst
2 жыл бұрын
Oh my god you just saved me from throwing my machine out of the window. Obviously I needed a British cricut KZitemr to get the answer I needed. Thanks so much
@happilycraftingkelly
2 жыл бұрын
So glad I've found this video! So tough to find tips etc for UK based Cricut Crafters, I've just set up my machine today trying to calibrate my printer has been a nightmare, thank you for these tips!
@RebeccaYates
2 жыл бұрын
You’re welcome!! Hope you get it working!
@meggiespek
3 ай бұрын
You are a lifesaver! Thank you so much! I have bought my first Cricut machine and just couldn't figure out why it didn't work after callibration. The US Letter paper trick saved me! So stupid Cricut doesn't mention this on their site...
@mrssprinklerman
2 жыл бұрын
Thank You! I did all the steps you explained so I'm not sure which one or if all contributed, but it worked. And my frustration is over! Thanks!
@tchili1
Жыл бұрын
Hi! Thank you so very much for all these tips. So many I haven't tried but am making a check list. This is the most helpful video I've seen. From the looks at the comments, so many others have been going through the same agonizing problems. Think Cricut should offer all their fixes without us having to ruin expensive materials andvget so frustrated it makes us want to quit altogether. Thank you, thank you, thank you!❤❤❤
@doodlebug4952
2 жыл бұрын
You, my dear, are an angel from heaven with the most delightful accent I've ever heard! I'm been trying to calibrate this stupid Cricut for 3 days, hours & hours & lord knows how much wasted paper. Every time I jumped through all the hoops, it was worse than the time before. My last nerve was twitching something awful! I followed all your "hints" with exception of forcing hardware upgrade & finally FINALLY I'm all calibrated; the Cricut is working nicely also, as it should have been right out of the box. Ugh! Thank you from the bottom of my heart, definitely subscribing to your channel & will be searching through your videos over the upcoming days & weeks.
@MCracknell
3 жыл бұрын
I'd been having this issue for months, and went to Cricut where they said that there was a fault with the light in my machine, so they replaced it and once again I had the same issue. I was this close to just asking for a refund on the machine, but I tried the US Letter print and it actually worked. Thank you!
@RebeccaYates
3 жыл бұрын
Yay!!!! I’m so pleased it worked for you! Xx
@lloydgustafsson2586
Жыл бұрын
Thank you!!!! This video finally solved our problem! We have tried for two months now. Now the fun part can start. Thanks again a lot! ❤
@Natalia-ct8sx
3 жыл бұрын
Hi, Rebecca! OMG I just figured out what was happening to my Cricut and this video was the salvation of me throwing my Cricut out the window and giving up. All this time it was the Letter configuration!! I just didn't know and it cuts perfectly accurate now
@RebeccaYates
3 жыл бұрын
Whooooo!!! I’m so pleased these tips worked!!!!
@terrigonzales6661
3 жыл бұрын
What is letter configuration.. I can’t get it to work even despite going through all these steps repeatedly 😭
@brianmayer9402
2 жыл бұрын
Thank you for keeping me off the evening news. I was on the verge of a rampage!!!!
@lynneczinski3032
3 жыл бұрын
I cannot thank you enough. I had to eventually uninstall Design Space and reinstall and then I updated the firmware and those two steps did the trick. Got great accuracy with the calibration. Should not have attempted calibration on my own. I only made matters worse. Had I watched your video first, I would have figured that the cutout around the square was close enough. Thank you, thank you, thank you!!!!!
@siobhanetrep3347
Жыл бұрын
Your video is really useful, it really made a difference for me with my Cricut. I was so disapointed I couldn''t calibrate it correctly that I lost interest in it. So thank you.
@mansoto1
2 жыл бұрын
Thanks so much! I was about to break the machine with a hammer, but your tips saved it!
@SuirenChannelVT
Жыл бұрын
I FINALLY FIGURED OUT MY CALIBRATION ISSUE! It only took me 2 weeks rofl. I used the print to actual size with PDF, lighting (which helped a lot but was still off) and everything under the sun. THEN after I got it to as close as I could but still off enough that it still sometimes cuts into my art and is lopsided.... i figured why not and did this: I noticed that even after using the calibration sheet and choosing the line that was exactly in the center that my cuts were still shifted to the left and a little high up. So, instead of choosing the exact center for the horizontal and vertical lines, i chose an option that was shifted a little to the right and below the marked lines. That absolutely did the trick. Everything cuts exactly now
@towelkeeper
7 ай бұрын
Thank you so much! Printing the PDF actually did the trick. I also made sure to print it in the highest possible quality, just to make sure.
@rami3465
Жыл бұрын
This was extremely helpful and straightforward. I've been having trouble with print and cut forever and I feel like everything I tried didn't work, so I really appreciate it! Thank you so much!
@RebeccaYates
Жыл бұрын
You are so welcome! I know how frustrating it is so I thought I would try help with this video! Hope you get it working! Rebecca x
@kristencox2565
10 ай бұрын
Thank you SO much! Your tips helped me finally get my machine calibrated.
@marciapeterson9565
2 жыл бұрын
Thank you! You have helped me sooooo much. This is going to be a journey...not a short walk. I have already changed my thinking and have seen such an improvement.
@DBMOTIONZ
2 жыл бұрын
Well said
@britniculp8118
Жыл бұрын
The PDF calibration sheet made all the difference- THANK YOU 🙏🏻
@craftyartiest
7 ай бұрын
OMG THANK YOU SOOOOOO MUCH!! FINALLY MY CRICUT HAS COLLABORATED 😊😊😊
@BenevolantBusinessBeauty
2 жыл бұрын
I've literally tried everything and you're video really worked! I believe for me it was closing to top of my cricut machine and going through the recalibration process haha. God bless you!
@ruthlangedesign3778
3 жыл бұрын
Rebecca!!!!!! I've just got to give you the biggest THANKS for your help!!! I am sooo grateful for your honesty in writing, that you changed to a silhouette portrait. I was nerveous about the thought of spending more money on yet another machine, but it was sooo worth it! I am sooo happy with the results I am finally getting after months of being stressed about the non cooperative cricut (when it came to print then cut). Thank you so much!
@RebeccaYates
3 жыл бұрын
No worries at all! The other week I recorded an update to this video comparing both the machines, not got round to editing it yet! The software for silhouette really has the edge as well, it’s so much quicker to design now. I was so nervous to try it out but I do think it’s a better machine x
@ojev4458
9 күн бұрын
THANK YOU!!! Turning down the lights did the trick!
@CarAndMechanical
Жыл бұрын
Thank you for this, I've just been through things on ours which sat on a shelf for a few years and needed a calibration for a new PC - it was the letter size bit, and as I'd been calibrating on the wrong print settings and scale it took a while to set things right as it had shifted so far down.
@digitaldebbie
2 жыл бұрын
Thank you SO much! I followed your tips exactly and finally got acceptable results. For me, I think it was selecting Yes instead of No when asked about the accuracy of the first calibration box. Such a helpful video!
@MM-ri6oe
2 жыл бұрын
Thank you thank you Thank You from Las Vegas Nevada. My machine was cutting everything wrong and up til I watched your video I kept hitting No after the first little square thinking it had to be perfect. You saved me. Lol
@cameramom60
Жыл бұрын
I tried everything, and nothing worked. I finally caught your comment about the firmware update. Once I did that it worked like a charm. Thank you! If you’re having no luck, be sure to do a firmware update!
@kernelspy
6 ай бұрын
We just a Circuit Maker 3 and this worked! I just used the PDF and set to US! Worked!
@Rachaeljoelle
2 жыл бұрын
I’m really glad I found this video! I kept recalibrating my explore air irk how many times and it still wouldn’t cut properly on my print and cuts. I plan to try some of these hacks thank you so much for sharing
@RebeccaYates
2 жыл бұрын
I hope some of these work! Rebecca x
@dulcienel401
3 жыл бұрын
Thanks for this video we spent a couple of hours trying to sort out the calibration, your tips did the trick. I think the biggest issue is the paper size. Thanks again.
@RebeccaYates
3 жыл бұрын
Really hope you get it working :) I can't how many people are stil having issues with this and how many people have watched this video! Rebecca xx
@KyeSees
2 жыл бұрын
I WAS ALREADY FLIPPING THE WHOLE DAY! I’m glad I found this video. Thank you so much!!
@LILBLUEBOXox
2 жыл бұрын
I haven't tried these methods yet, but I am excited and hopeful I can learn to love my Cricut properly :) TY!
@charlottehayward5943
3 жыл бұрын
Cricut shouldn't be this hard to use! Your video is amazing. Thank you so much.
@RebeccaYates
3 жыл бұрын
I know!! I am shocked by how many views and comments this has had! And can’t believe these issues haven’t been fixed by cricut! glad this has helped a bit though!
@33suncatcher
Жыл бұрын
Thank you for this! I was getting so frustrated with my machine. Getting the mat over to the left and blocking the light while it’s scanning fixed my problems.
@wen_51
Жыл бұрын
This video is a life-saver! I was so frustrated with my Cricut that I was ready to throw it away.😅
@lindabradford9591
Жыл бұрын
Me too. I was just on the phone with cricut because I can't even get cricut to do the calibration sheet to no avail. I'm disgusted with cricut and I don't think I'm purchasing another crucut.
@laurencollins7526
Жыл бұрын
Reinstalling helped fix my calibration issue!! Thank you SO much!!
@itsjelley
3 жыл бұрын
Thank you for making this video! I tried a combination of saving as PDF and printing with the additional print settings available that way, and closing the cricut lid (as I do have a lighting issue in my office) The stickers came out much better than before! Still not 100% perfect but definitely a major improvement so I’m happy!
@RebeccaYates
3 жыл бұрын
That’s brilliant! I’m so pleased this helped!
@maryannem3521
2 жыл бұрын
I can't thank you enough for this absolutely Amazing and Brilliant video - I have tried absolutely anything and everything to get my print and cuts perfect and then watched this video and with all your tips (that not even Cricut can provide themselves) it has finally FINALLY come together. I am so so grateful. Thanku so so much
@RebeccaYates
2 жыл бұрын
Yay!! I’m so pleased you got it working! Rebecca x
@sallyannball3553
3 жыл бұрын
🙌🙌 Thank you!! Finally got Beta Offset to work around my images and now the cut is off. Much appreciation for your calibration suggestions! (and.... thank you for no cheesy music or sales pitches!)
@RebeccaYates
3 жыл бұрын
Oh that's ok! I hope you get it sorted. I just wanted to make something I thought might help others... I was so annoyed at the lack of information from Cricut. We makers have to help each other if we can!! Rebecca xx
@sallyannball3553
3 жыл бұрын
@@RebeccaYates update from me…. I finally humbled myself and called Cricut for assist. After 2hrs of trying to calibrate, they gave up, too and are replacing my Maker. New machine arrives on Thursday. Thanks again for your helpful video 👏
@cookingwithshambabe543
7 ай бұрын
thanks for the tips! now i got my print then cut back.. it really helped me.
@renatafullilove8121
2 жыл бұрын
Thank you so much! Printing the PDF, making sure US letter borderless was selected fixed my issue. I also closed the lid when the machine was reading the registration lines.
@RebeccaYates
2 жыл бұрын
Yay! I am so pleased it helped! Rebecca x
@schwook72AUS
Жыл бұрын
Yes. Thank you. First thing was my issue - my printer must be suddenly resizing things - because who knows. It was all working just fine yesterday.
@kokopup
Жыл бұрын
thanks, this has been very informative and helpful! I was pulling my hair last night trying to calibrate my machine last night!
@gioannajohnson1520
2 жыл бұрын
Thank you so much! It actually worked by printing the PDF sheet instead, I could actually see the difference in the print, the calibration sheet that was printing directly from the design space was off, so I used the one from the Cricut site and made sure it was on Letter size and print full image and just followed the prompts on the Cricut. Thank you so much for the information :)
@carlaschulz1840
2 жыл бұрын
I'm so thankful I found your video I was having issues with my maker reading the registration marks I have been dealing with it for months I have watched so many KZitem videos nothing was working until I forced it to update the firmware and oh my goodness it worked thank you thank you thank you
@Geoffroxx
Жыл бұрын
Thanx for the advice on calibration, One other problem I have is that Smart Permanemt Vinyl doesn't seem to like ink stickin' to it, have you encountered that problem
@sarahcallaghan711
3 жыл бұрын
The calibration tip worked for me thanks been a pain of cutting my stickers but it’s cut perfectly around the square so hopefully I can make some more stickers for my shop 👍🥰
@RebeccaYates
3 жыл бұрын
That's great news! I'm so pleased!!
@TheFireBird-w5k
7 ай бұрын
It passed calibration 3 times and it’s STILL not cutting correctly. It’s cutting through the actual design. What do you suggest then?
@rodsmith-dr5nw
Ай бұрын
Same issue
@jenfirth8032
2 жыл бұрын
I too have been tearing my hair out so thanks so much for this video. (Currently sat in the dark trying to calibrate my machine.)
@myalabamahome1125
3 жыл бұрын
I give this video ⭐⭐⭐⭐⭐! I'm so frustrated with calibrating my Maker. Thanks so much for the tips!!
@missTiffuhnee
2 жыл бұрын
Thank you! I used my iPad to try and calibrate it but it never worked so I had to switch to the computer and it worked for me! How frustrating! Now the only question is will it stay calibrated if I switch back to my iPad to cut? 😢
@rachaelrisk6466
Жыл бұрын
Thank you you are bloody brilliant..i was trying to sort this for days and nights. Watched a daft amount of youtube video came across your KZitem and its sorted thank you so much 🎉 now to make stickers, cake topper and alsorts of other things Thank you 😊
@vivisectionexposed2019
2 жыл бұрын
Hi Rebecca, thank you for this video. I am watching it nearly one year later, sat with my new Explore 3. I have tried everything you mentioned but........ the cut still isn`t right. I have say 6 round cornered square to be cut. The top two are nearly perfect, the next 2 down go off a little to the left and the bottom two are off to the left even more. I have made sure my machine is on a level surface. I have my lid closed and also lean over the machine to cast a shadow, all to help it read the lines. Have you experienced this? Help!!
@aliciajakovich
2 жыл бұрын
Thank you so much. Here in AUS we use A4 too and I suspected it was part of my issues but couldn’t quite figure it out. Thank you so much :)
@shaunebartoo2551
2 жыл бұрын
Thanks! That worked. Question- when you print your stickers do you still have to download before you print and cut?
@robinreid4850
2 жыл бұрын
Rebecca you gave me a lot of information. My Cricut cuts completely around the page rather than around the image. Any suggestions??? Robin Reid
@SergentGuimauve
2 жыл бұрын
Thank you so much for your video, it helped me so much for my second day trying to have fun with my christmas gift :)
@LaurasBeatingArt
2 жыл бұрын
omg this worked!! i wasn't printing to actual size!! thank you!!
@JasmineN16
2 жыл бұрын
This video was so helpful!!! I think my issue was the light. I closed my Cricut top and my cut has been way closer. The closest it has been in years. Thank you so much for this!!
@smol_included
3 жыл бұрын
I'm super thankful to had found this video and for your tips !! For me personally, I was using A4 and after transferring over to US Letter sizing and re-cabilrated, the cut went precisely how I needed it to. Thank you so much again! ~
@RebeccaYates
3 жыл бұрын
You are so welcome!! 💗💗💗 glad you hear you got it working!! X
@winryrose
8 ай бұрын
Do you have a video on how you made/ cut these stars in case the machine miscuts?
@Beximos
3 жыл бұрын
I've also been tearing my hair out for two days now with printing stickers for a baby christening. This video helped, thank you for your exhaustive thinking. I would love to know if you have a video explaining the whole process of doing the stickers like the star sticker sheets you have here which you've added a manual bleed so I assume you have two files.. How do you get the Cricut to print the stars and then cut just the other file?? ALSO. I see in the next videos, you got a Silhouette machine????? I REALLY want to know if you would recommend that instead of the Cricut?? Do you get the precision you were looking for using it??
@RebeccaYates
3 жыл бұрын
Hi lovely! So glad it helped, I am shocked with the number of views and comments it has had!! And it’s still getting - can’t believe these issues haven’t been sorted out yet. But pleased if I can help at all because I know how frustrating it is… I did decide to get one yes… it was a hard decision to invest more money but I do prefer it. I recorded a video the other week comparing both machines and my experiences (not got round to editing it yet!) But overall I would say silhouette is better for consistent cut accuracy and the software. Hope this helps and you get yours working! xx
@Beximos
3 жыл бұрын
@@RebeccaYates I will definitely be checking out that video when you get it put up! :) Thanks so much for your lovely answer. And keep up the good work!
@bondgirl373
2 жыл бұрын
Your video was super helpful. Thank you!
@kw026
2 жыл бұрын
Thank you so much for this video! I changed my paper setting from A4 to US and it's cut perfectly.
@karenewilliams7128
Жыл бұрын
Thank you so much, I had tried over 20 times and the cuts kept getting worse. The pdf file was Bang on the first try❤
@FOCrafty
Жыл бұрын
Hello and thank you! Did you make a video where you show how you did the stars, where the cut line is slightly within the border of the image? I'm having a hard time finding a tutorial for that.
@JeffreyNicholson-l6y
Жыл бұрын
Did you ever post that video about how you create those star stickers?? Would love to learn how!
@robertfurlow5452
3 жыл бұрын
I applaud your ingenuity, but I hate to say it; calibration shouldn’t be this heart breaking. Cricut acted like this couldn’t be happening; they made me video my whole process and then wanted me to ship the machine to them. I was able to “trick” the machine at one point: To far left was my only problem; correct calibration was 7, I input 5 (which was a little counter-intuitive). It cut the square nicely, but the designs were off. I am returning the machine.
@robertfurlow5452
3 жыл бұрын
Update: after all the hours of frustration, which we’ve all experienced, I returned my Explore Air 2. I was able to calibrate in one try. I also noted in their literature that “ all Cricut machines come pre-calibrated.” Rise up and return your Cricut!😎
@misspunkaffair
Жыл бұрын
The PDF tip saved me thanks so much. How silly!
@stefaniamason8595
2 жыл бұрын
Thank you thank you!!! After 3 hrs I downloaded the template and it worked .
@chicaloggedon8945
3 жыл бұрын
Thanks for that, I needed to get that calibration done and it looks good but I can't get the System Diaglog to come up. It came up before but not now. So Im looking around to see if I missed something. Any suggestions? Its not in the back at all as suggested. TIA
@LimHuiLingCynthia
Жыл бұрын
I've learned so much from your video! Thanks for your generous sharing! Hoping I can adjust my machine's calibration soon!
@nerdymomsunited
2 жыл бұрын
Thank you so much for this video, it was so helpful! You saved my Circut project!
@tbwscrypto3053
Жыл бұрын
Calibration finally solve! I believed its Cricut calibration feature faulty. They probably know but refused to admit because they'll have to do a recall for sure! If you keep calibrating, and select the best cut on the Number Top and Letter to the Right, it'll keep adjust. Use this as an adjustment for your off cut and just keep adjust till cut where you need it. Ignore the calibration box and anything else!
@7677agarcia
3 жыл бұрын
You saved my life today. Thank you so much for this info. Especially for the download 🤗. I couldn't get my cricut to connect to my printer.
@funkychicken7312
2 жыл бұрын
Thank you for sharing this information!! Very kind of you to help others with the knowledge you’ve collected! Cheers!! 👍🏼😘
@KatieSchmitz
2 жыл бұрын
Thank you so much for all this info. I was finally able get my cricut to cut correctly!!!
@cuivreaka
3 жыл бұрын
I just nudge it on my air 2. I use the draw and cut settings which was good for a few months until last month. everything is off by .762mm/.03" to the right and .635mm/.025" to the bottom. I've done all the hacks even those that just apply to print then cut, but nothing works. Cricut had an actual update that wasn't just me forcing an update a few days ago, and it worked for less than a day. Then the machine said it had to update again and that undid all software fixes for the margin error. For a moment I was like,'is cricut doing the iphone thing to get you to buy the newest machine,' but I've heard that it's bad across the board.
@rodneytroupe1951
2 жыл бұрын
So so helpful..thank you thank you thank you...was working on the calibration for almost a week..
Пікірлер: 327