This video is designed to briefly explain, the basic actions in restoration of flash drive on Phison controllers, with a program Phison MPALL .
Although we will only consider the example of the chip PS2251-50, but this instruction fully or partially applicable to other models.
HOW TO CHOOSE THE RIGHT FILES OF PROGRAMS?
The selection is carried out in two stages: first we look for the burner, then for the firmware.
By controller model:
The third and fourth characters in their names indicate the chip model:
BN50 - burner for the controller PS2251-50
FW68 - firmware for PS2251-68
By memory type:
BURNER:
2K and 4K memory - the binary must end with ... 2K.BIN or 2KM.BIN , for example BN67V1022KM.BIN
8K and 16K memory - ... M.BIN or it may not contain the letter M at the end, but simply end with a version, for example BN67V132M.BIN or BN67V101.BIN
FIRMWARE:
8K and 16K - ... 10M.BIN , for example FW60FF01V10510M_20110616.BIN
2K and 4K Page - ... 24M.BIN , for example FW50FF01V30724M.BIN
TLC - ... 50M.BIN , for example FW61FF01V30150M.BIN
eD3 - ... 53M.BIN , for example FW60FF01V10453M.BIN
SS Toggle Mode - ... 56M.BIN , for example FW67FF01V60056M.BIN
By freshness:
Newer version of the firmware
BN07V106M.BIN - Burner version v106
FW07FF01V10153M_20140116.BIN - firmware version 01.01.53 [2014-01-16]
FW07FF01V20253M_20140403.BIN - 02.02.53 [2014-04-03]
Disclaimer: Channel is not responsible for any kind of loss. Try at your own risk.
Tags:
#usbfix
#repairbrokenusb
#fixpendrive
#fixflashdrive
Негізгі бет How to fix dead USB or Corrupted USB: USB is not recognized or USB is not showing up Disk Management
Пікірлер: 149