I changed the position of the magnet, turned the system on and spinned the wheels for more than 17 Minutes... Not even a change on the display. Please help me if you have an idea 🙏
@stevejohnston8161
2 жыл бұрын
oh my gosh, thank you so much for this video...I just got my bicycle back after a long wait of 6 months in the shop, and then this happened...I am so grateful for the video you posted.
@ultrabryce2086
3 жыл бұрын
I wanted to unleash my bike by changing the position of the sensor. After 15 kilometers I planted everything. your solution saved me. Thank you so lot ! It's easy and so happy to save my bike..... (Kona El Kahuna - Shimano E6100)
@JADZIEM
3 жыл бұрын
Thank you very much, you saved my life. I had this error couple of days ago, I was coming back home 20km without support and no faith, now is solved thanks to you! Thank you!
@ronyban2953
2 жыл бұрын
Thank you 😊 With your help, I'm working hard on the delivery.
@Rdran7
Ай бұрын
If the solution from the video doesn't work for you try this: Turn your bike upside down, detach the speed sensor from the chain stay and then holding it (watch your fingers!) right up against the spoke magnet, pedal it round for a while. The E014 code cleared almost immediately doing this.
@hecklerman69
3 жыл бұрын
Easy and simple .... thank you !
@marcinfiglarski6871
Жыл бұрын
Shimano Steps e8000, the same error e014, and this method works 😊
@astanaarcommander
Жыл бұрын
Thank u very much man , it worked , but it took me like 300 spins before it worked not 100 turns..
@TofuRoxUrSox
4 жыл бұрын
Thanks that just saved my commute home :)
@Alibahadur009
9 ай бұрын
Thank you Sir, It worked for me! Error came in the middle of street while going home, and i was really affraid what happened to it. This video saved my hundred of euros. Thanks mate 🎉❤
@21thpl
9 ай бұрын
Great to heard it :)
@bob_bob07juni38
2 жыл бұрын
Thank you so much Now I can finally drive again
@pasisurakka1980
4 жыл бұрын
Thanks, this work for Steps e6010 also!
@21thpl
4 жыл бұрын
Great to heard that
@mramigo3506
2 жыл бұрын
Mr Mooi thanks 👍
@luizmoraes5842
Жыл бұрын
Obrigado... thank you
@bobstansbury9263
2 жыл бұрын
hi this work for me BUT. I had a mod on the magnet .I HAD TO GO BACK TO THE MAGNET ON THE REAR WHEEL .I think it has to spin at over 12mph . i tried x2 with the magnet on the crank but only about 5mph DIDNT WORK . very good to no if your out on a ride
@stevejohnston8161
2 жыл бұрын
Why is this not working? It worked a week ago when I got this error code, but today I just spun my wheel for 5 minutes and it's still not working? Any ideas
@Needalex
5 ай бұрын
mine wont clear i tried every position possible ... I cant afford to send the bike to a shimano factory any ideas ? (i tested the speed sensor and it works fine)
@Aaron-nv6om
4 жыл бұрын
Thank you
@elvingtonred
Жыл бұрын
Thanks for this, I've just had the same issue on my E8000 after pissing around with it! 😉
@21thpl
Жыл бұрын
Thanks and good luck
@najduchmotocykle357
Жыл бұрын
Uratowałeś mi życie dzięki
@21thpl
9 ай бұрын
Serducho pewnie już bije wolniej :)
@alexanderberg3198
Жыл бұрын
Thanks a bunch. :)
@120downunder
5 ай бұрын
Awesome it worked on mine 👍
@mastoman1
Ай бұрын
Can i bypass this over and over again? Like i wanted to mod my bike and i have gotten this error one time and i got very scared and now i wonder that could i just mod it and bypass it again or would it help if i installed a homemade switch that could turn the restrictions on between every 10km and drive like an 2km and turn them off again?
@bobstansbury9263
2 жыл бұрын
THE BIKE SHOULD NOT BE UNDER A LOADED PRESURE ( FREE WHEEL ON A STAND IS GOOD )
@fatibenthami1526
Жыл бұрын
Hello sir thank you for this explanation. I have a same problem in ly sparta er 0014 how can i repair it plase Tja k you again.
@lechzdechwsamolocie9904
10 ай бұрын
Dzięki
@21thpl
7 ай бұрын
Ważne, że rower działa
@markbodley4983
3 жыл бұрын
This does work if you ain't got a bike stand ride it instead to same effect
@niksusa
3 жыл бұрын
did it work
@jensonparker4734
2 жыл бұрын
I cant get it out of E014 been stuck like that for days anyone have an idea?
@wojciechturek1601
2 жыл бұрын
I have same cant get it out
@InfamousJackk
4 жыл бұрын
Do you Delimit your bike and move the sensor?
@21thpl
4 жыл бұрын
Yes i do it
@kerryking7003
4 жыл бұрын
@@21thpl I did this and the E014 code came up. I had to re-install the sensor to it's original position for the error code to clear.
@21thpl
4 жыл бұрын
@@kerryking7003 yes move litlebit 2 or 3mm
@kerryking7003
4 жыл бұрын
@@21thpl Are you saying the magnet and sensor have to be within 2-3mm of each other to avoid the E014 error code coming up and then it works OK?
@youtobus
4 жыл бұрын
Thanks e7000
@virusak3
11 ай бұрын
Not worked. Hello. I have a city bike with shimano steps e5000 and i got an error E014 from switching the sensor to the pedal so i can run it faster. I put the magnet and the sensor on the pedal and after 20 km of hard riding, I got this error and I can't get rid of it. It doesn't work at all anymore, I tried all the manuals, youtube, I downgraded the SW via BT, moved the sensor and the magnet, but nothing. Today I'm calling an authorized service in Bucharest, I'm curious if they have some reset tools or something.
@GelekteTunesNL-so3gl
7 ай бұрын
did u fixed it ?
@ronaldkorbee9625
3 ай бұрын
Hi @virusak3 did you manage to fix it? Please let us know
@aleksandartodorov3695
3 жыл бұрын
It didn't work out for me. Can I reset the controller.
@TheMysteriesOfThePast
3 жыл бұрын
Did you solve it?
@niksusa
3 жыл бұрын
@@TheMysteriesOfThePast how about u
@conparator1
Жыл бұрын
Not working. Did step by step like on video.
@calaiscruiser
Жыл бұрын
This was no help and didn't fix the issue.
@markbodley4983
4 жыл бұрын
Didn't work for me .I'm not impressed with shimano
@mickvandert
3 жыл бұрын
Did you fix it? Im having the same problem. This does not work for me. So if you did, can you share the solution?
@markbodley4983
3 жыл бұрын
I hacked my bike by moving the magnet when I put the magnet back I didn't put the spacers on properly on the sensor and that was my problem when I realized what I did I felt silly. hope I helped you
@markbodley4983
3 жыл бұрын
Yes the spacers are important you need the magnet close to the sensor
@Maliusis
4 жыл бұрын
Doesn't work on my E5000
@TheMysteriesOfThePast
3 жыл бұрын
Did you solve it?
@Maliusis
3 жыл бұрын
@@TheMysteriesOfThePast yes, my motor was sent back to shimano factory and they reset an error.
@TheMysteriesOfThePast
3 жыл бұрын
@@Maliusis do you know what the error was? And like to the shimano factory in Japan or like your dealer?
@Maliusis
3 жыл бұрын
@@TheMysteriesOfThePast they had to reset a motor controller, what is possible only in the factory (shimano repair service wasn't able to do it as well). It was sent to factory in Poland ( closest to me).
@sincoliveapb
3 жыл бұрын
i cant clear my code ,i think my sensor is busted happend while riding tried everything .
@mickvandert
3 жыл бұрын
SincoLive, Did you clear it? I cant clear it either, I tried everything...
@mickvandert
3 жыл бұрын
@@TheMysteriesOfThePast nope, the motor is sent to a factory and havent heard from it yet
@sincoliveapb
3 жыл бұрын
@@TheMysteriesOfThePast yes i had to take it too the shop ,i was running it whit moved sensor and magnet on the pedal arm. so need a computer too clear the code ;/
@Samsonite-it4gw
3 жыл бұрын
@@mickvandert Did you hear back from the factory? Having the same issue and it is becoming expensive to get fixed! Bike Mechanic has tried everything and quoted $750 to fix it now.
@mickvandert
3 жыл бұрын
@@Samsonite-it4gw Got it back and it works again. I had to call the Shimano department of my country, Netherlands, myself before they agreed to ship it back. The whole process took me over 3 months.
Пікірлер: 69