Great job! I am at the same point with frameless cabinets that go to within about 1/2" from the ceiling. I'm going to leave a reveal like you mentioned. I'm really glad I saw your video, good job!
@FixThisHouse
Жыл бұрын
Thank you so much Clay! This is what this video is intended for, which are for those who have the same issue as me 👍🏽😊🙏🏽
@chrisford8403
Жыл бұрын
As a professional carpenter, don't EVER ask if someone wants a reveal. Just do it! The flush mount will always have a noticeable seam unless both pieces have dead square edges and caulk will make it worse. The reveal will always look nicer and will hide settlement of the structure much better.
@Doodad2
Жыл бұрын
I was just going to say the same! I thought I would see if someone else had already pointed this out. 😀
@TechwithSTONE4
Жыл бұрын
There should be a three inch apron on top, Similar to bottom floor Cabinets kick plate/apron, like that yo can dress it up with a nice molding, for a nice looking professional job.
@911WASanINSIDEjob420
9 ай бұрын
women are always wrong anyways
@DragonPilot
Жыл бұрын
Pro Tip from my 40+ years experience general contractor brother: Spritz that caulking bead with a NON-AMMONIA-based window spray cleaner. Then run your finger along the bead to give it a professional finish. Does a much better and less messy job than a damp rag. No need to even wipe up the excess spray cleaner as it will simply evaporate with no residue. Great video!
@Longtack55
5 ай бұрын
And hopefully won't embed any bacteria from your finger.
@tonygoshive785
Жыл бұрын
I prefer the overhang also, much more luxury looking
@thezfunk
9 ай бұрын
I am also finishing up an Ikea cabinet install with the 40 inch uppers which are leaving a gap at the top. I was going to take their contoured deco trim piece and cut it down but I am not sure that is going to work. My ceiling is pretty uneven from filling in an old soffit. I have a ton of scribing to do but this might help me in a few areas. It at least gives me something to think about. Having the piece wider than you would think you need so you can nail it through the top is kind of an obvious 'duh' moment for myself. We have the bodbyn gray so I would have to do some paint matching. Luckily, I found some caulk you can custom color with paint so I can get all those little fiddly bits filled in.
@Vanessa-pe1fo
Жыл бұрын
I have about 1 inch gap, love what you did. I was wondering how I was going to do this! good job well done.
@ttuck9603
Жыл бұрын
nice - I prefer the reveal, but I understand why you had to go flush :)
@FixThisHouse
Жыл бұрын
Thank you so much Tony! 🙏🏽😊
@TOTLE929
3 ай бұрын
as i always learned not all walls or ceilings are straight 😁 this is a good idea im remodeling our kitchen in next 2 weeks and our 42 in cabinets will be all the way up the ceiling BUT.. i'd rather leave an inch to fill so cabinets wont have problems opening so filling that gap will be helpful. and the back gap can be filled with scribe molding.
@Kathleen253
Жыл бұрын
This is great, I have the same problem with my kitchen cabinets. Thanks for the helpful tips as always.
@FixThisHouse
Жыл бұрын
I’m glad I could be of help! Thank you Kathleen! 🙏🏽😊
@booster1469
Жыл бұрын
Yep. I have the same problem right now.
@peggykhiev2884
10 ай бұрын
Our kitchen had the same issue, and we went with the reveal route. It turned out great! (And I'm the wife/boss, lol)
@shaffer4220
Жыл бұрын
I like a reveal. Puts character in the look.
@Unknown-un6nt
Жыл бұрын
Flush just creates an ugly seam. We try and avoid seams if possible. If your installing new cabinets, Cut and install the molding first, then install the cabinet tight to the ceiling. Shoot your nails in from the top. Make sure they are not too long, or you will blow out the inside of the cabinet and have nails sticking out. This is still considered crown though. Flat crown
@mayorstoner3459
Жыл бұрын
I'm with you, I like the reveal look better
@phyllissmith7003
Жыл бұрын
i think the over hang set the cabnit off and makes it look factory made
@FixThisHouse
Жыл бұрын
I agree! 🙏🏽😊
@bartosullivan8050
7 ай бұрын
Invest in a stand for your mitre saw. Better cuts and better knees!
@borndiy5490
5 ай бұрын
I liked your idea best. Looked nice seeing a bit of reveal coming forward. Flush looked like you messed up hanging cabinet and used extra wood to cover mistake.
@buffalotears1785
Жыл бұрын
Your Wife was Right , it Looks So much better. 😊👌✌🖖🖖🖖
@FixThisHouse
Жыл бұрын
Thank you so much! My wife will be happy about your comment! 🙏🏽😊
@flytheskymyway
Жыл бұрын
The wife was wrong. To complex to make everything flush. I find it funny when guys bow to the wishes of the wife - even when they are the expert.
@robertbehl8484
10 ай бұрын
I like the flush look. I would of just gotten some matching panels to use as the trim. Ikea has some cheap returned panels in their discount area that would work.
@radicalpipes
Жыл бұрын
I like the video of the kitchen cabinets that you posted today it was awesome really big thumbs up.👍👍👍👍👍👋👋👋📷📷📷📷👋👋👍👍👍👍👍
@FixThisHouse
Жыл бұрын
Thank you so much! 🙏🏽😊
@pqsnet
5 ай бұрын
I like the reveal option better too.
@lisaferrara8120
Жыл бұрын
Using the reveal is more practical and better looking. You don’t have to use caulk between the cabinet and trim.
@FixThisHouse
Жыл бұрын
Thank you for the feedback Lisa! 👍🏽😊
@jamesnichols2535
9 ай бұрын
I like the reveal good 1/2 in out
@mariselacontreras6732
8 ай бұрын
Excellent. Thank you
@FixThisHouse
8 ай бұрын
Thank you for watching! 🙏🏽😊
@LABoyko
Жыл бұрын
Instead of a reveal, insert it flush like you did, but attach a thin quarter round and do the same where the cabinet meets the wall.
@jovosedlar3395
Жыл бұрын
Поздрав из Црне Горе. Педантно и уредно! Браво!
@emiliaescobar7652
6 ай бұрын
Great video, thanks for posting.
@ernestoregaldo
Жыл бұрын
What about that gap between the back of the cabinet and the wall. How would you cover that?
@bartgarver664
7 ай бұрын
You just solved my problem.
@maloney7461
Жыл бұрын
Excellent fix.
@bevyg5635
Жыл бұрын
What is “baccarat”? Not sure I’m spelling it correctly…it was the rope product shown after the Dap Extreme Stretch …thanks UPDATE : he’s saying ‘Backer Rod’ lol, which I found in notes lol
@MommaJB
Жыл бұрын
So if I have a smaller gap ( 0.5”) on one line of cabinets versus 1.5 “ on the other side of cabinets. How can I make it look less nice ? My cabinet guy said there is nothing he can do and now I’m very disappointed. He had told me there would be a mall gap but it looks unfinished. The rest of the kitchen looks beautiful but just the uneven gaps are really bothersome.
@BradleySkaggsNYC
11 ай бұрын
You were right by letting it extend a bit. Do that makes it look intentional, trying to make it look flush, looks like a mistake.
@AK-dn8sp
Жыл бұрын
Reveal, for sure. Makes it look like a moulding
@DonJudge-y1g
2 ай бұрын
like the reveal
@rxlo1015
Жыл бұрын
Nice job 👍
@FixThisHouse
Жыл бұрын
Thank you! 🙏🏽😊
@MrsJAZack
Жыл бұрын
People ...the ceiling is not level so the reveal is not level. He had to find a way to fill in something. So what if he moved the cabinet up. The cabinet needed to be level, thus no matter what there would have been a gap. Once the area is filled, lived in and accessorized, his solution will hardly be noticed. When I had this problem in an home reno to make three apts thus needing three kitchenettes, these cupboards where not only simple, but the perfect tenant cupboard easy to replace. We hung up four wall shelves in each kitchen using the thick colored acrylic shelving which we had cut at a glass store and angle brackets. Then took the same colored thick plastic see thru material-acylic Green or Blue or Yellow (each kitchen had its own color)... and that was what we inserted into the gap, essentially matching the blinds to the acryllic shelves to the acryllic gap material and the handles on the drawers all coincided. So you can always decorate this away. but the acryllic comes in a array of colors and is very nifty looks like colored glass easy to attach no need to glue corners. We caulked the top! used a pry bar to get it flush with the cabinet and caulked the ceiling seam. Came out very clean.
@dighawaii1
Жыл бұрын
Nah. the cabinets could have simply been mounted as close as possible to the ceiling. It's half an inch, no one cares about cabinets being a half inch higher. Then use either caulk or lattice strips to hide any gaps.
@lesliejones8817
6 ай бұрын
This was so helpful
@rea8755
Жыл бұрын
The reveal looked better.
@FixThisHouse
Жыл бұрын
I agree! 🙏🏽😊
@brettbarager9101
Жыл бұрын
What about the gap behind the cabinet on the wall? Just Dap it?
@FixThisHouse
Жыл бұрын
Hi Bret! It’s totally up to you and how big of a gap. This one I have is about 1/4” which dap will work, but for bigger gaps you might want to fill it in like the top with a thin piece 🙏🏽😊👍🏽. Some would add quarter round or shoe, but that’s a preferred taste.
@dighawaii1
Жыл бұрын
Industry standard is 3/4" scribe molding.
@amaarasangam5973
4 ай бұрын
how to attach cupboard to ceiling in the middle of the room?
@marklangkamp3151
Жыл бұрын
Nice job, thanks for sharing
@chasingche
4 ай бұрын
Classy!!! Love it.
@juanpabloflores2355
Жыл бұрын
Very nice work
@k.p.9990
Жыл бұрын
If there is a small space a person could put some lights above the cabinets... like rope lights.
@SuccessShared
Жыл бұрын
Great informative video thanks
@katrinarose3903
7 ай бұрын
I think they were build a tad too high haha but you did a great job with it
@seamus6994
Жыл бұрын
Well done...
@juanandujar7187
Жыл бұрын
The reveal looked better. But it still came out looking good 👍
@FixThisHouse
Жыл бұрын
Thank you Juan! 🙏🏽😊
@truthbetold2914
Жыл бұрын
Your supposed to build the top frame first, attach it to the ceiling then install the cabinet pushed up against it
@Utseuski
Жыл бұрын
Doesn't work with IKEA rail hanging system. Work with traditional US cabinets though.
@01jbeals
Жыл бұрын
Just because that’s how it’s supposed to be done, doesn’t mean whoever installed it did it properly lol. Have the same issue in a house I just bought. Super annoying.
@JLT2342
Жыл бұрын
Reveal option looks more professional than flush. The the flush option, the seam is shown looks very ugly, no matter how good the cauking job is.
@snowlinewest1321
8 ай бұрын
Reveal looks far better...even a deeper one would look great, like intentional trim. Flush looks like what it is...a filler or patch.
@badtoro
Жыл бұрын
Reveal 100%. Flush looks cheap/after thought
@FixThisHouse
Жыл бұрын
I agree! But it wasn’t my call 😅
@douglasaxcess3547
2 ай бұрын
The bosss🤣😂😂😂😂
@donaldlee6760
Жыл бұрын
I preferred the look of the reveal.
@hellokittyr
Жыл бұрын
Why cant u just mount ur cab an inch higher? Or mount it lower, add a nice trim piece and fill the gap
@FixThisHouse
Жыл бұрын
That works too Alvin! I’m just showing it for educational and instructional purposes, i like to show different scenarios on this channel, some of the viewers may have just bought a house with cabinets with this type of situations 👍🏽😊🙏🏽
@01jbeals
Жыл бұрын
@@FixThisHouse so glad you do too, because there’s soooo many situations where information like this is needed!!
@yavuzhocaoglu8568
Жыл бұрын
Instead of 18mm of you use 15mm mdf of mfc you will not need hammering my opinion and some any way still good job
@todd7148
Жыл бұрын
I prefer the reveal. It looks like it was done on purpose. The flush looks like it was to cover a mistake or poor workmanship.
@FixThisHouse
Жыл бұрын
Thank you for the feedback! 🙏🏽😊
@bigdave5946
Жыл бұрын
I like the reveal better
@domtam6571
Жыл бұрын
Yes, I get brother…wife wins😂
@FixThisHouse
Жыл бұрын
😂 🙌🏽
@psdaengr911
Жыл бұрын
If the ceiling is flat, you should have been able to mount the cabinets high enough that no gap was visible with the doors closed.
@chrisford8403
Жыл бұрын
When you're mounting cabinets, you want them level. Floors, walls and ceilings are never perfectly square and level. So, you need to leave space above the cabinet for adjustment. Consider that a run of cabinets is usually made up of 3-10 cabinets, that can be anywhere between 3 and 20 feet. Also consider that these are Ikea style flat top cabinets. That means the entire roof of the cabinet needs to sit on the ceiling as opposed to conventional plywood cabinets where only 3/4" is touching the ceiling.
@Josh.1234
Жыл бұрын
@@chrisford8403 also you don't want to mount your cabinets much higher than 18" over the counters. If he has a unusual ceiling height, there might not be a cabinet height that perfectly hits the ceiling.
@aure818v
Жыл бұрын
I would go with a moulding. But that's me.
@harrisond8132
Жыл бұрын
You were right about the reveal. Don't tell your wife though.
@FixThisHouse
Жыл бұрын
😂 🙏🏽😊
@shawntotalhomerepair3467
Жыл бұрын
Would it have not been smarter to just move the cabinet up 1/2"? Not to mention a hell of a lot easier and a lot less work.
@chrisford8403
Жыл бұрын
Actually, no. This was the much easier option. He only showed the 1 cabinet. Kitchens usually get entire walls full of cabinets. Plus, what are the chances of the ceiling and wall being square along the entire run of cabinets.
@compilation8800
Жыл бұрын
The ceiling is not flat how I don’t think its safe
@wowyummyyy
Жыл бұрын
WOW 😍😍😍😍😍😍😍👍👍👍👍👍👍💯💯💯
@FixThisHouse
Жыл бұрын
Thank you!
@michaelparker5030
Жыл бұрын
😎✌️
@FixThisHouse
Жыл бұрын
Thank you!
@SaldosInc
Жыл бұрын
I think this whole kitchen was done wrong. Those cabinets needed to be installed lowered and add the crown molding, the the can light next to the cabinet a no,no
@rafars2246
Жыл бұрын
Or just shove some kitchen paper and fill the rest with some mud, paint over it and it looks like wall. Sometimes people are just....
@rafars2246
Жыл бұрын
@@joemmaal rtded
@joevaldivia6733
7 ай бұрын
It appears you installed the cabinets too high and filling the gap simply doesn’t look good 👎
@j.c.nightwalker5322
7 күн бұрын
The wife was right
@franksuhuang6
Жыл бұрын
👍👍🌹🌹
@danchev338
Жыл бұрын
If you get stuck having to do this after having done a refurbishment, you should put tools down for life. A little forward planning will do miracles
@dighawaii1
Жыл бұрын
What if it was always the plan?
@danchev338
Жыл бұрын
@@dighawaii1 then you would have raised the cabinet to be flush with the ceiling plus your ceiling will be dead flat
@dighawaii1
Жыл бұрын
@@danchev338 not if the plan was to leave a gap.
@nel6211
Жыл бұрын
Now fill the gap on the wall.
@FixThisHouse
Жыл бұрын
🫡
@Kevin-mp5of
8 ай бұрын
No revel is instant fail.
@darrellwalker3403
9 ай бұрын
Hack
@SuperDryDiver
8 ай бұрын
your wife was wrong the reveal looked better
@cynthiaayers7696
Жыл бұрын
You don't need to fix the Gap, the Gap isn't broken.
@LikeItOrLumpIt2107
Жыл бұрын
Please don't pronounce route as 'rowt'
@LABoyko
Жыл бұрын
Nothing beats persnickity pronunciation criticism from a cat.
@txmade4371
Жыл бұрын
Dosent look good at all. Move the cabinet up, that’s a Mickey Mouse job. 🤦🏿♂️
@FixThisHouse
Жыл бұрын
This video is meant for those who have this situation, but I do Agree with your solution 👍🏽😊
@trevorritchie2575
Жыл бұрын
If you move the cabinets up and the ceiling isn't flat the doors could rub on the ceiling when you open them. Plus, some cabinets are hung on rails so it's impossible to get them tight to the ceiling.
@taralewis9916
Жыл бұрын
Still looks cheap
@FixThisHouse
Жыл бұрын
🥹
@LABoyko
Жыл бұрын
Don't talk about yourself like that, Tara.
@taralewis9916
Жыл бұрын
@@LABoyko HaHa
@jer3504
Жыл бұрын
Doesn't look too good
@FixThisHouse
Жыл бұрын
🥹
@VMa-mq3pm
Жыл бұрын
Dude you need to graduate to a miter saw stand rather than work off the ground
Пікірлер: 128