Looks like most of my replies in the comments have disappeared. I'm not sure why this is but I do generally try to reply to everyone. 🙂
@wyldelf2685
10 ай бұрын
Horrible YT updates , , ,main culprit attempt to remedy in YT Studio ap , , ,
@ndre2561
8 ай бұрын
Yeah I see that you replied to me but I'm not seeing the reply when I click. Strange but I'm doing well halfway through the repair
@screwthishi5thing
2 жыл бұрын
I was pretty bummed out when I arrived home from the holidays and my ps2 was dead, but by some miracle I stumbled on this video and the diagnosis and solution were the same. Thanks so much for sharing the entire process!
@CarabaoTravelChannel
3 жыл бұрын
You can not make a KZitem tutorial better than this. 5/5
@SajeradoProductions
2 жыл бұрын
I %100 agree. Just replaced my power supply and it's all thanks to this video!! Amazing tutorial!! 100/10
@Chezgatt2000
2 жыл бұрын
@@SajeradoProductions lol
@geoff8793
2 жыл бұрын
Just fixed the girlfriends ps2 thanks to this video. Thanks very much my man For anyone else following along mine was a scph-50003. But I used the same power supply from the vid that is advertised to work with 50000, 50001 and 50006. Still works the same. Only difference between the models that I could see with an untrained eye was where the ribbon cable is connected
@papparaba5504
2 жыл бұрын
For checking the power, you have to insert the tester in the first and third pins, right?? I can't see it well in the video.
@play5
3 жыл бұрын
This is excellent! I have an old PS2 I found thrifting that I can't get working, so I'll have to run some these tests and hopefully I can fix this myself.
@shredbraahh8606
3 жыл бұрын
I can't even believe this 100% worked for me. Thank you so much! I got the power board for only $14 on eBay. Hopefully it's not too poorly manufactured at that price haha, but man.. Thank you again for this! PS2 resurrection!!!!
@DrKeez
2 жыл бұрын
4:14 After reassembling after a battery swap, I accidentally mounted the power board 'under' the tabs of the expansion cage instead of on top of them. This caused the power board socket to misalign and not make full contact with the pins, causing no boot issue. Found the problem watching your video. Thanks.
@mikemiller8342
2 жыл бұрын
love this, this was my first big fix ever, I'm giving this PlayStation to a friend who really wants one, a already have the slim so I decided just to give this one away. great detailed video
@anonuserx6451
2 жыл бұрын
awesome video and format. will be following your repairs.
@busasquatch
2 жыл бұрын
I appreciate the lesson on using the multimeter for continuity tests! That was great!
@jeremiahnichols8272
Жыл бұрын
Thanks for the video. I wasn't sure which points on the power board to test where it goes straight into the mainboard. Definitely have a dead power supply
@everiv4804
2 жыл бұрын
Let me just give you the thanks for this video so easy to follow and useful! I loved that it was short and explanation clear. I fixed my PS2 that got damaged after my trip from Europe. 😊 I thought it was the electricity voltage change but then realized that it was this the problem..i bought the same card that you used here.
@Ammut6
2 жыл бұрын
i bought the same one with no luck... :\
@barryklinedinst6233
2 жыл бұрын
Or you could troubleshoot the power board and replace the bad parts. Diodes resistor and fuse. That way your a tech,not a module jockey
@manuelapacheco9129
4 жыл бұрын
very didatic and clear, and it was also great that you separated it in parts in the description and bothered to warn about the risk of electric shocks with the board after you unplug it (i swear i wouldn't now) i knew barely nothing about electronics and now i could spot the problem on my ps2 and will probably be able to fix it :) thank you a lot i just wanted to know how long should i wait to open the console after i turn it off? you said the electricity lasted for quite some time and now i'm scared
@manuelapacheco9129
4 жыл бұрын
@@AJGW great :) will you do more videos like that?
@Durranihumayun10
2 жыл бұрын
@@AJGW Hey. I have a PS2 issue. Hope if you know how to fix it. 🙂 I have listed the problems in the comment section of this video.
@Durranihumayun10
2 жыл бұрын
@@AJGW But I m also stating my problems here in case you can't find my comment from the comments section. "Hey. I need help regarding my PS2. I m facing this problem for the first time. It was working pretty well last month. I will list all problems. If there's any question regarding then please ask. Here's what issues I started facing: 1. There is no display. When I connect the PS2 and turn on the power button from the back. The reset button shows the red light. I then click on it and then the Green and Blue lights turn on. The fan at the back starts working. The disc tray is also working, but there is no display. 2. After clicking on reset multiple times it then starts to display but the start-up music is out of order. The sound gets hanged. The controller is working (i can enter to and go back from browser and system configuration ). If I click on the reset button again then there won't be any display again. Same issue. And if it displays (after resetting many times) and then when I insert any CD. Loading gets hanged, and if the game works out of the blue moon then there is no sound." Would be happy for the reply. Thanks.
@annadudziak7057
3 жыл бұрын
Thank You for showing this video to me I am helpless so Respect 😭
@laghi72
4 жыл бұрын
I would like to thank you so much for this video I could not fix my PS2 (and I should have had to buy another one..) without. Absolutely essential!
@johnsampson6387
9 ай бұрын
Thank you!
@AJGW
9 ай бұрын
No problem!
@xzavierdrescher5933
3 жыл бұрын
Thank you this is exactly what I needed
@franciscocampos8857
Жыл бұрын
Thank you for making videos like this. I have one question: my glass fuse is blown. It is 3,15a - 125v. Now, the problem (at least where I live) is that it is impossible to get one like that as it is quite uncommon. Do you have any suggestion on a fuse that is similar or equivalent that could work? I clearly don't want to risk any other components
@AJGW
Жыл бұрын
I'm not sure where you're based but I believe 125V would only apply to the North American continent (and some of the surrounding islands + maybe some Pacific islands). If the voltage is higher than that where you are then that might be why the fuse has blown. Where I am in Europe everything is ~230V so I couldn't use a 125V console here without a special adaptor. I found a few USA places if that's any help: www.radioshack.com/products/radioshack-3-15a-125v-5x20mm-fast-acting-glass-fuse-4-pack www.ebay.com/itm/161121059853 www.amazon.com/Bussmann-GMA-3-15A-Acting-Cartridge-Listed/dp/B000HOQVG6
@arthix0
3 жыл бұрын
Very sound video, thanks mate! Would be helpful if you included a link (or name of site) where you purchased your replacement board, other than that very helpful and easy to follow! Appreciate it mucho!
@Hraezlyrrrr
3 жыл бұрын
at first, I was scared because I thought that I snapped my ribbon cable, but then I realized I had the SCPH 50001 model, and in that one, the ribbon cable is hidden to the side.
@Hraezlyrrrr
3 жыл бұрын
Thanks so much. This video was excellent, I found a PS2 in a thrift shop for 25$ instinctvly, I bought it and unsurprisingly, it didn't work. I then got a new power supply board and it worked! Usually a used or new PS2 goes for 60-80 USD, and I got mine for 30!
@Durranihumayun10
2 жыл бұрын
Hey. I need help regarding my PS2. I m facing this problem for the first time. It was working pretty well last month. I will list all problems. If there's any question regarding then please ask. Here's what issues I started facing: 1. There is no display. When I connect the PS2 and turn on the power button from the back. The reset button shows the red light. I then click on it and then the Green and Blue lights turn on. The fan at the back starts working. The disc tray is also working, but there is no display. 2. After clicking on reset multiple times it then starts to display but the start-up music is out of order. The sound gets hanged. The controller is working (i can enter to and go back from browser and system configuration ). If I click on the reset button again then there won't be any display again. Same issue. And if it displays (after resetting many times) and then when I insert any CD. Loading gets hanged, and if the game works out of the blue moon then there is no sound. Would be happy for the reply. Thanks.
@azuwanautogas
2 жыл бұрын
i have problem gren light turn on but blue light not come out no video no sounds
@W1RMD
4 жыл бұрын
Thank you! 🙌
@salutetojohnlennon
3 жыл бұрын
If u replace a 110v version of 220v version of the power supply will it be converted to 220?
@Hellfire5227cb
2 жыл бұрын
I have the same problem with my PS2 but the board gets 11.98 volts so idk if I should replace it
@Hellfire5227cb
2 жыл бұрын
@@AJGW thanks when I was looking at the power button board I saw that the ribbon cable was bad
@FijiLaw
Жыл бұрын
I have that 11 volts too and can't on, no lights too, should u change?
@marcelm.1844
3 жыл бұрын
There is mostly one Capacitor(under 1 Euro) defective on the Poweboard and not the complete Board.
@Itsuki_Takeuchi
3 жыл бұрын
Which one?
@marcelm.1844
3 жыл бұрын
@@Itsuki_Takeuchi C3 on the Powerboard in the SCPH-50004
@Itsuki_Takeuchi
3 жыл бұрын
@@marcelm.1844 i have a scph 30004 Which capacitor is it there? The big one primary side?
@marcelm.1844
3 жыл бұрын
@@Itsuki_Takeuchi With the power supply unit of the scph-50004, the C3 is a known fault that is common. Unfortunately, with the 30004, no idea. First test the Fuse the the Diodes. I think it isn't the big Capacitor.
@cvpercvtze
2 жыл бұрын
Where buy in Aliexpress or Ebay power supply for SCPH-50008 or SCPH-50004?
@tameromarw
2 жыл бұрын
Hello What is the power supply output in amperes ZSSR094ZA how many amps
@michaelj.caboose4204
Жыл бұрын
I did the resistance test on the on/off switch and saw that my multimeter wasn't making noise when I probed the black wire but worked with the white. Does this mean I need a new on/off switch? Edit: I couldn't test the voltage part but I did check the resistance on the fuse and actually beeped so I assume that the power board may be fine
@AJGW
Жыл бұрын
That does sound like you might need a new switch!
@ndre2561
8 ай бұрын
You mentioned briefly to be careful about the capacitors but what specific precautions should i take
@AJGW
8 ай бұрын
Essentially: Try not to touch them, especially right after unplugging your PS2. 🙂
@ndre2561
8 ай бұрын
@@AJGW just swinging back in to thank you because I'm currently playing sly cooper with my working PS2. I made some videos and posted the process on FB for my friends to watch so I'm gonna drop a link to your channel in the post since you were so helpful making this in the first place. Thanks again! Really excited to solder in my mm3 for my PSX next!!
@AJGW
8 ай бұрын
@@ndre2561 Thank you for your comment! Glad to help! Sly Cooper is a good choice. 👌
@iravalentindejoya5453
4 жыл бұрын
Hi, I would to ask if you know how to fix av output?, my ps2 just hanged when I'm playing then I reset it, now it won't show any output in the TV, the unit itself have power, can turned on, the fan is working, the disc tray is working ,TV is okay, the cords are okay. :((
@bballballin21
3 жыл бұрын
I don’t like what appears to be zip ties on the new board
@bena2.014
4 жыл бұрын
Really nice tutorial man, nice job! However, a ps2 that a friend gave to me wont turn on, and the power supply is working fine. Both the voltage and the aperage are normal, and I can't find the problem. Already checked the power button board, and it's fine as well. I know that distance troubleshooting kinda sucks, but could you lend me a hand in finding the problem?
@bena2.014
4 жыл бұрын
@@AJGW Thanks for the quick response! I found a main board on OLX (kind of a Brazilian ebay) for 7 bucks, but no information if it's working or not. Do you think it's worth a shot? (I do have some soddering skill and know a bit how to probe around the board, but i have no idea where to probe on the ps2)
@bena2.014
4 жыл бұрын
@@AJGW Yeah... Well, gonna give it a shot. Maybe I'm lucky and its completely fine! Thank you very much man.
@wyattsimpson2962
2 жыл бұрын
It shocked the shit outta me because i accidentally left it plugged in does that mean I need to replace it still?
@PS2-Pro
3 жыл бұрын
Can you give me the pinout of the power button because I want to turn on my ps2 without ribbon cable and thanks in advance
@KienjeTheGiant
2 жыл бұрын
Thanks!
@baistosh
2 жыл бұрын
hi how you know if the new ps2board is for 220v?,, im trying to buy mine..but never menioned what volts it says
@TronPlays_Official
3 жыл бұрын
ive got a fat ps2 50003, i cant find a powerboard for that model, can i use a different models powerboard, please let me know as soon as possible thanks !!
@TronPlays_Official
3 жыл бұрын
@@AJGW Amazing, thank you !!!
@Wehawk0311
3 жыл бұрын
Excellant video
@andreas10617
2 жыл бұрын
Hello i have a problem with my ps2 i broke it but i dont know what is wrong with it. I was working on it to replace the housing and wanted to pull the disctray out while the console was on and the motor of the disctray was pulling in the other direction to close the disctray. And the console made a sparking sound and doesnt do nothing anymore. If i touch the power supply i get a schock so the power supply does still work so i thought. But i ordered a replacement anyway. With the replacement power supply my console makes a noise when i turn it on but still does not work and the fan does not work and the blue and green/res power lights do not work either. What could be the problem. Thanks im advamce for any help.
@matthewdelgross5344
2 жыл бұрын
So there are only two (2) connectors? Am I correct? The big 3 prong that seems connected solid to the system, then the one that he unplugs. Any tips help!!
@mikeshobbiesandrandomstuff
4 жыл бұрын
You didn't check the switch correctly only the wires. You should have connected your meter to the positive and negative and flipped the switch on and off. If working properly it would beep on and off when flipping switch on and off.
@cfoster8706
3 жыл бұрын
Help! I just bought a used ps2 with not power, when I test the power board is giving me 11.83v? Is that a good board? Now I also notice the wire coming from the front power bottom was damaged by the corner screw from who ever opens the lid before. How can I fix that part, it that replaceable? Where can i get a new flat wire like that? My ps2 model is SCPH-50001/N the P-board looks very different on the inside from the one on this video. I found this wire on Ebay Reset Eject IR 12 pin flex Cable.
@jsh1831
7 ай бұрын
Question what if my ps2 works fine but the lights aren’t working? Do I do the same thing you did in the video ?
@AJGW
7 ай бұрын
If it's just the lights then you'd need to replace the power button module, it's a very small circuit board that sits behind the buttons. If your PS2 still runs then the power board is still completely fine. To be honest if it's just the lights that aren't working I wouldn't bother opening it up to fix it as there's a small risk that you damage it. 🙂
@Ammut6
3 жыл бұрын
I just did the replacement and I still have no power at all.
@scrubmcchub2255
2 жыл бұрын
I have replaced my power board with one that I know is working and I still get no lights what should I do now
@Ammut6
2 жыл бұрын
same.did you ever find a fix?
@scrubmcchub2255
2 жыл бұрын
@@Ammut6 no I haven’t even tried
@neppy-chan9297
8 ай бұрын
I have one that powers on and otherwise works fine, but none of the LEDs are lighting up. Came across this video trying to find information on that, would a new power board fix that, or is that an issue with a fuse or the LED itself? Also have another PS2 with a different small issue, rumble doesn't work on controller port 1.
@AJGW
8 ай бұрын
The LEDs are on a small PCB with the power buttons themselves. You can find replacements for the whole unit for about £10-20 GBP on eBay at the moment if you do a search for "PS2 power button fat". There are a few different models so make sure to get the right one for your PS2 model. Not heard of the rumble not working on one port before! It sounds like a dirty or broken connection or pin somewhere. You can remove the controller and memory card section as one piece and replace it too if needed. I would try to inspect the pins and the connections on to see if you can see any obvious issues, it might be something tiny or hidden though. For both issues you can follow my video until the covers are moved and if I remember right both parts are just connected by ribbon cables at that point.
@neppy-chan9297
8 ай бұрын
@@AJGW Thanks for the info! Seems like an easy enough fix to perform.
@patrickkyle9502
4 жыл бұрын
Hello sir, i am now encountering the same problem on my PS2, the power supply you showed on the video was the same as mine-the 10000 japan, and I wanted to replace mine the problem is there are no 10000 power supply board to buy online, i wanted to ask if i can use the 30000 version power supply board of the PS2-'available online' , if you search the image online, the pins and build of the board are identical to the 10000 and 30000, hope you can help me sir, any tips and feedback will be helpful, thanks
@patrickkyle9502
4 жыл бұрын
Like in the video different style but the build is the same, i think it will work but i still need more info sir thank you
@patrickkyle9502
4 жыл бұрын
@@AJGW wow thank you for the help and even sending out some links, i will be more careful and check what model is mine, Thank you for the help again sir👍😊
@restorationandrecovery102
3 жыл бұрын
Mi ps2 es 110 ,esas fuentes de remplazo son de 220? Son compatibles?
@mosenimubanga1866
2 жыл бұрын
Do I really need a powerboard? What about just a fuse? Mine's been down a couple of years. Just went bang. Surge.
@raiderman28
2 жыл бұрын
where did you find a board for that ps2?? i tested everything on mine and i am not getting any power at those 4 pins. So i believe the board is bad. it had alot of dust inside when i opened it up to clean it. i even tested the ribbon to make sure the reset switch was making contact. the only thing i found was no power at those 4 pins you mentioned.
@raiderman28
2 жыл бұрын
I found a used one, but not sure if i actually tested it correctly. At first I thought i was testing AC current there, but I believe thats only at the actual plug off the wall, then it is converted into DC current right??? I think it says it on the board. Your suppose to get close to 5-6 volts. If thats the case, my old board was good, and the problem is further in the unit. Maybe the ribbon on the the reset switch or the actual reset switch. When i tested the ribbon i got continuity on each pin. So it could be the reset switch or something on the board
@sr8shoota
4 жыл бұрын
I have two units that will not power on, I have tested the power supply and it does output 11.79v. But I am not getting any sign of life after powering the both of them on. The weird part is both are fat models but the mainboards are different where you cannot use the hard drive from on on the other since he connectors are different and one has the cmos batter on the board and one has it on a smaller board. I believe one is rev.09 and the other is rev.10. What I have tried is connecting the ps2 to the power supply only with out the av cable. I am wondering if it is a button problem. Is there a way to power it on without the reset button? also is there any other way to tell if it powers on , other then the red light on the rest button?
@reacey
2 жыл бұрын
Iv got a dead ps2 here , psu is good , the only on board fuse i can see on the motherboard is good and has 12v there ...any ideas mate ? Thanks , also im getting no voltages at the button ribbon connector
@99Zepper99
3 жыл бұрын
what is the difference of the cable you plug in at the end and the yellow red white Cinch cable? Do I need to plug in both of them?
@99Zepper99
3 жыл бұрын
I mean this cable: www.walmart.com/ip/PS2-PS3-RCA-Audio-Video-Cable-for-Sony-Playstation-2-Pack/998304898 My PS2 won‘t turn on, trying to figure out what might be the source ..
@TheDany1997
3 жыл бұрын
Nice video man. Although, when I tested the power switch and the board fuse, they went out good, but my board doesn't give me the 12 volts required. Do you think I can fix my board or I should get a new one? thanks
@TheDany1997
3 жыл бұрын
@@AJGW not even 1 volt I mean, its practically dead
@TheDany1997
3 жыл бұрын
@@AJGW thanks!
@VocaloidViewer
4 жыл бұрын
Thank you very much for the video. I think I have the same problem, nothing would turn on. I opened up the ps2 and got to the power board and tested the voltage and it didn’t read anything at all. So I’m assuming it’s completely dead. I just need to replace it to fix it right? Thank you.
@VocaloidViewer
4 жыл бұрын
@@AJGW alright thank you!
@scooterwearssocks
2 жыл бұрын
the board on ebay works for 3000-3009. My model is 30091. will this board work well with my system? (I assume so, but it's better to ask before you burn your house down)
@cfoster8706
3 жыл бұрын
I replace the power board on mine and the power bottom 12pin flex cable, and still no power is coming on? The model is 50001/N. Any idea what else it could be wrong?
@cfoster8706
3 жыл бұрын
@@AJGW Thanks for the info.
@germansandal
3 жыл бұрын
Where’s the 12 pin flex cable located? Would a faulty ribbon going to the reset and eject button cause no power?
@areyannatansi898
3 жыл бұрын
Hi very help-full vid thanks , my PlayStation 2 is SCPH-39003 will this board work on it? I can’t find any board exactly for this number
@areyannatansi898
3 жыл бұрын
@@AJGW I did it’s just you said 30000 to 39000 and mine is 39003 I thought this won’t work on it Can you please send a link of where I can buy it from
@areyannatansi898
3 жыл бұрын
@@AJGW Hi I ordered the power board and it came from China very quickly and replaced the power board and it’s working absolutely fine again thank you very much for this video I was given this PS2 on 2002 Christmas present from my dad and had a lots of good memories with it it stopped powering on about three years ago and I couldn’t find anywhere to take it to fix it contacted couple of websites in the Uk they said it’s too old and they wont to be able to find the parts So again thank you very much I have transferred £5 to your PayPal just to say thank you have that coffee or a beer on me When I opened up the PS2 it was really weird the old power board had a really bad smell of burning did yours have that? Also I was thinking of ordering a spare power board just in case if this dies in the future and there are no more replacements available, how long do you think this replacement board will last for Again thank you
@Ammut6
2 жыл бұрын
Does anyone else have a solution if this doesn't fix the problem?
@xxraveapexx2750
3 жыл бұрын
thx for this video and this descrpition. My SCPH-50004 is not working just after switching places. i searched a lot on the internet and could not find anything only power supplys for the 5000X/50001/50006 Model. So u saythat I can Use this Model for the 50004, too?
@xxraveapexx2750
3 жыл бұрын
@@AJGW thx a lot for the fast answer =) i ordered a new Power board and i subscribe ;)
@marcelm.1844
3 жыл бұрын
I have a 50004 too. It was an defective Capacitor on the Powerboard
@gamerkhan2693
3 жыл бұрын
Can u fix my ps2 slim 9004
@HamzaKhan-xu4pu
3 жыл бұрын
Hi, I have a PS2 SCPH 39003, is it okay for me to purchase the 50000, 50001, 50006 power boards? I don't see any SCPH 39003 power boards.
@HamzaKhan-xu4pu
3 жыл бұрын
@@AJGW oh okay thank you so much!
@TheMagpyeTrader
2 жыл бұрын
I was really hoping it would go more indepth with what components can go bad on the power board and how to replace them instead of just buying a new power board.
@sirgranticus
4 жыл бұрын
do you know how to choose the power supply board? it seems there are more than one option for replacement. the model on my ps2 is scph-39001
@sirgranticus
4 жыл бұрын
@@AJGW I appreciate the reply. so the 1 at end of the model scph-39001 puts mine within that range, meaning it can take any power supply board available? it seems the only boards available are for 50000,50001,50006.
@sirgranticus
4 жыл бұрын
just ordered one. you are awesome! thank you! 🙏 I'll be playing again by november
@aimsco5910
4 жыл бұрын
Can i use a PS2-50000 power supply board for a PS2-39006 console?
@ByeWorld
4 жыл бұрын
Yes
@abdullahaalghamdi3980
5 жыл бұрын
Thank you so much
@bryllnovelero9560
4 жыл бұрын
Is it really 12v or 24v? I got 12v in my p.s. but still no red lights. Already checked flex cable their continuity is good. Pls help 😓
@bryllnovelero9560
4 жыл бұрын
@@AJGW thank you sir
@marcelm.1844
3 жыл бұрын
There are about 15 Fuses on the Mainboard
@marlou2043
4 жыл бұрын
4:20
@TheGamer507
3 жыл бұрын
not workin 8(
@CarlosRivera-in9iw
4 жыл бұрын
How much did the board cause ?
@marlou2043
4 жыл бұрын
8:19
@sanvicente2384
3 жыл бұрын
totally useless to me. i have a no power light issue, but my console turns on, its just THE LED that doesnt turn on.
@FunnyGA1ex
Жыл бұрын
Seems too dangerous for just some guy who wants to solve a problem. Need like a rundown crash course on these terms and tech used
@AJGW
Жыл бұрын
The only part with any real risk is the testing of the power board with a mains supply. You can skip this part working on the assumption that it is the power board that is faulty. The only risk then is spending money on a new power board you don't need. 😅 Of course if you don't feel comfortable doing the steps in the video then I wouldn't suggest you try, I just tried to put as much information as I could in a ~10 minute KZitem video. 🙂
Пікірлер: 125