Do you have any solution for my GY-MAX30100 sensor sir? its show "Initializing MAX30100..FAILED: I2C error " when i use the example "tester" on the MAX30100.lib
@EDISON_SCIENCE_CORNER
Ай бұрын
This means your board is not detected. Either it is damaged or a bad connection
@Sieu_Joestar
Ай бұрын
@@EDISON_SCIENCE_CORNER and how to fix it sir?😭
@eswarelectronics4205
2 жыл бұрын
Good job want a full tutorial of how to make oxometer with result on display
@EDISON_SCIENCE_CORNER
2 жыл бұрын
Yes
@awts_8116
Ай бұрын
Hi, how did you connect the 4.7k resistor to the metal thing on the pcb? did you use any special type of wire
@EDISON_SCIENCE_CORNER
Ай бұрын
Copper wire
@awts_8116
Ай бұрын
@@EDISON_SCIENCE_CORNER thanks
@awts_8116
Ай бұрын
@@EDISON_SCIENCE_CORNER would this work for the black version of max30102?
@EDISON_SCIENCE_CORNER
Ай бұрын
@awts_8116 yes
@ahmadzeghari3793
Жыл бұрын
hi friend you showed me that it can be a problem with the sensor producing i have a similar problem but with max30102 black can you help me solve the problem
@EDISON_SCIENCE_CORNER
Жыл бұрын
Do the same
@greenatlas4031
29 күн бұрын
Sir i did it same but it not working
@EDISON_SCIENCE_CORNER
29 күн бұрын
Try again
@greenatlas4031
29 күн бұрын
Sir is this necessary to connect scl and sdl pin to on the led of max 30100
@shashank6642
3 ай бұрын
"Thank you it worked successfully." I have saved lot of time, thank you so much for uploading the video. Keep uploading more videos.
@EDISON_SCIENCE_CORNER
3 ай бұрын
😊
@sijahak6012
2 жыл бұрын
Great tip I'm about to start a project ☺️
@EDISON_SCIENCE_CORNER
2 жыл бұрын
👌👌😽
@Electro_shastra
11 ай бұрын
Bro i did it but not get solution
@EDISON_SCIENCE_CORNER
11 ай бұрын
Have you done the same like this
@Electro_shastra
11 ай бұрын
@@EDISON_SCIENCE_CORNER Bro problem solved I have max30102 but i done the programing for max30100 thats why problem arrises Thanks bro
@EDISON_SCIENCE_CORNER
11 ай бұрын
Great
@aaravinthan001
3 күн бұрын
@@Electro_shastra iam also same problem how u resolve
@shourjyajitmaiti2490
2 жыл бұрын
Everything is fine but led is not glowing sometimes it is glowing when I connect USB and is stop glowing when I am putting my finger ...plzz help
@EDISON_SCIENCE_CORNER
2 жыл бұрын
Might be connection problem
@vijiljoy5125
Жыл бұрын
great bro ...! i was searching for this vdo 🙃👍
@EDISON_SCIENCE_CORNER
Жыл бұрын
Stay connected
@Kamalamai2054
2 жыл бұрын
led not glowing but shows the i2c adress
@EDISON_SCIENCE_CORNER
2 жыл бұрын
Then check the code
@shourjyajitmaiti2490
2 жыл бұрын
@@EDISON_SCIENCE_CORNER same slbro sometimes when I am putting the usb cable it is glowing ....did u solve it bro...plzz reply
@andresemiliogonzalezpaez1472
Жыл бұрын
Hello! Does this fix work the same on the MAX30102?
@EDISON_SCIENCE_CORNER
Жыл бұрын
Yes
@arjuns9392
9 ай бұрын
Can i use it without soldering
@EDISON_SCIENCE_CORNER
9 ай бұрын
Yes
@maulet3839
10 ай бұрын
thank you so much bro
@EDISON_SCIENCE_CORNER
10 ай бұрын
Welcome 🥳
@jecentjosephki1969
2 жыл бұрын
First
@EDISON_SCIENCE_CORNER
2 жыл бұрын
🌻
@Channelnvs
2 жыл бұрын
I've done the same but the led is not glowing, how to fix
@EDISON_SCIENCE_CORNER
2 жыл бұрын
Which library are you using
@Channelnvs
2 жыл бұрын
@@EDISON_SCIENCE_CORNER max30100_milan
@EDISON_SCIENCE_CORNER
2 жыл бұрын
That will not work use the max30100
@Channelnvs
2 жыл бұрын
@@EDISON_SCIENCE_CORNER but heart rate is showing
@EDISON_SCIENCE_CORNER
2 жыл бұрын
You cant get correct values without the led
@carlos516
Жыл бұрын
muy dificil, valí vrg
@EDISON_SCIENCE_CORNER
Жыл бұрын
Means
@atharvmh1861
5 ай бұрын
Code ?
@EDISON_SCIENCE_CORNER
5 ай бұрын
Use example code
@tokioshiguerra
Жыл бұрын
code code code lol
@EDISON_SCIENCE_CORNER
Жыл бұрын
Just use the example code
@ranscody353
Жыл бұрын
i need the code
@EDISON_SCIENCE_CORNER
Жыл бұрын
Go to example
@creatvitylight224
2 жыл бұрын
Most of the time this type of error r frustrated..
@EDISON_SCIENCE_CORNER
2 жыл бұрын
🤗
@MINUZPLUZ
2 жыл бұрын
Useful tips 👍
@EDISON_SCIENCE_CORNER
2 жыл бұрын
🐬
@akshayraj8699
2 жыл бұрын
Max30102 press key problem
@EDISON_SCIENCE_CORNER
2 жыл бұрын
What?
@akshayraj8699
2 жыл бұрын
Code for blood oxygen [ Serial.println(F("Attach sensor to finger with rubber band. Press any key to start conversion")); while (Serial.available() == 0) ; //wait until user presses a key Serial.read(); ] I pressed all the available keys, but it is not converting.
@akshayraj8699
2 жыл бұрын
@@EDISON_SCIENCE_CORNER have a another doubt, if I connect MAX30100 with another sensor in arduino board, the heart rate goes zero and spo2 showing references values..clearly pulseoximeter is not working. But if I connect pulseoximeter with arduino, heart rate and spo2 values are showing and the pulseoximeter is working. Do you know what is the issue ? ( when I connect another sensor, max30100 is not working. )
@EDISON_SCIENCE_CORNER
2 жыл бұрын
Which device is that
@akshayraj8699
2 жыл бұрын
@@EDISON_SCIENCE_CORNER PC + arduino uno r3 + Max30102. Can u please give the solution for the press key issue? , I have a another issue with max30100, what I mentioned above, how can I solve ?
@adrianhp6549
6 ай бұрын
I'm using a max30102 sensor, is it necessary to solder its pines to make it work?
@EDISON_SCIENCE_CORNER
6 ай бұрын
Check it without modification. If not working please follow this hack
@aaravinthan001
3 күн бұрын
Bro iam also using but when I connecting oximeter is not working
Пікірлер: 66