Never try this. Else, your drive is gone forever. so deceitful. I tried it and my hard drive cannot be detected by PC anymore. It was not behaving this way before. Just to rip you off your money
@momomoguri8026
3 жыл бұрын
Hi after clean, it says Diskpart has encountered an error.
@boostedej6
3 жыл бұрын
type in search disk part and run as admin first then re try
@AnnkurKumar
4 жыл бұрын
In this video you mentioned two methods. My external hard disk reads " the type of file system is RAW". Does the first method , wil not result in data loss.
@Zeldestrox
3 жыл бұрын
After format fs=ntfs quick ( I decided not to change name) mine is stuck at 0 percent and after some time it says DiskPart has encountered an error: The parameter is incorrect. Please help I need that hard drive.
So this deleted all of my d drive and I can’t get it back is there any fix to this Edit: turns out those two where unrelated my issue was a physical problem with the disk drive
@shohojpath246
2 жыл бұрын
it worked!!!
@ryleyw3684
4 жыл бұрын
Is there a way to do this without wiping the data on it... I need to get into my laptop to backthings up, however the partition (basically the main one) that has my operating system windows 8, and all my other files is the one that is RAW. I'm not sure how this happened because all I done before having unmountable boot volume errors, was I installed a 9lder cd game, played it all fine no issues, I then add it to my steam library tried starting from there, 2 or 3 times each time it crashed. Ok so I'll just not do that then, then before I can do anything else it freezes, and I get a blue screen error, then it restarts and gives me unmountable boot volume. I been trying for the past 2 days to get it fixed as I had this unmountable boot issue before, last time was a simple fix. Untill I finally did the cmd to see partitions etc to see my main is raw, so that explains the issue. I bought an external hard drive for if I was able to get back in windows to get everything off, then do a factory reset, in the past I just done refresh.
@MarauderARG
Жыл бұрын
format fs=ntfs diskpart error incorrect function ...
@WerewolfMaster
Жыл бұрын
2:56 I got: There is no volume selected. Please select a volume and try again. I did: *select volume* [here same number as your disk]
@AOMEITech
Жыл бұрын
Is your volume also the same with me? You should change the number according to your volume number.
@jerseygiant428
2 жыл бұрын
Diskpart has encountered an error: the parameter is incorrect. See the System Event log for more information. Please help me
Hey, thank you so much. this is the only that really worked. I lost my files but I can get them back anyway but I saved my HDD.
@visualaidugandalivetvmemor8956
3 жыл бұрын
I don't want to lose my video files what can I do please
@youtubepremium8360
3 жыл бұрын
@@visualaidugandalivetvmemor8956 dont use it
@bys3219
2 жыл бұрын
My D File İs disappear How can I fix
@twicecompilation2300
3 жыл бұрын
Thank you so muchhhhh😭😭😭😭😭😭😭😭😭😭 I'm trying to fix my usb last night using your tutorial but it didn't work. Now I tried it again and this time it works I'M SO HAPPY YOUR THE BEST GODBLESS YOU
@AOMEITech
3 жыл бұрын
We are also happy for you!
@D.k_Sisodia
2 жыл бұрын
you are the bestttttttttt!!!!!!!!!!!!!!!!!!!!!!!!!!!!!! 🥰🥰🤗🤗
@AOMEITech
2 жыл бұрын
Thank you.
@alokm4239
3 жыл бұрын
I had tried many ways no use . But once I seen your method wow 😀 it worked.. Thank you ❤️ I really appreciate you keep doing like this many tricks
@muhammadfurqanshaikh1012
2 жыл бұрын
DiskPart has encountered an error: A device which does not exist was specified. See the System Event Log for more information. ☹☹☹
@charlesdomingo5828
4 жыл бұрын
My external HDD is not appearing anymore on my windows explorer.
@AOMEITech
3 жыл бұрын
You can initialize disk for if there is no partition and drive letter, it won't appear on Windows file explorer.
@megaKingmind
3 жыл бұрын
love you so much😘
@eymenyigit2350
3 жыл бұрын
ohh god... thanks
@alexeyd.1232
4 жыл бұрын
clownfiesta. wtf? What about data on disk?
@hamadabendary4957
3 жыл бұрын
thank you
@ChandTara
3 жыл бұрын
How we can convert raw to ntfs without data lose???? Please help me any one...cmd chkdsk code is not working.... i m in troube
@AOMEITech
3 жыл бұрын
Back up your files
@nickloss2377
2 ай бұрын
You are suggesting that people format their drive that has somehow changed from a file format like NTFS over to Raw data?? Are you crazy? PEOPLE, DO NOT DO THIS. FORMATTING YOUR DRIVE IS STUPID. You do not want to write anything new on that drive until you get your data off. Any sort of change to that drive could result in the entire loss of all your data. This includes formatting even if it's a quick format, there is still new data that will be written to that drive.. even if it's just a small amount of data in the header or the mbr, that will result in a loss of data. Do not listen to this person. Look at other tutorials. This one is just trying to sell you something by an idiot that doesn't know what they're doing
@hentosama
3 жыл бұрын
this wont get your files back! use recovery softwarwe before formating or doing any diskpart operation!
@AOMEITech
3 жыл бұрын
Hi dear, I think you may want to say make a backup before formatting.
@robertwestinghouse4098
3 жыл бұрын
AOMEI did not offer format for Raw HDD.
@lamciamanta_khai_padahdah
2 жыл бұрын
It doesn't fixed at first anyway I restart my laptop and it's fixed thank you so much❤
@nitinkosuru
2 жыл бұрын
Thank You So Much Madam You saved my 128GB Files 😍😍😍😍 I can't express my happiness
@gabgatesolutionsfreebies5380
11 ай бұрын
I am finished, this cmd solution has killed me. All my files 😭😭. My windows 10 failed and hard drive started showing raw. I removed it from my laptop and plug in another laptop. After trying the "attributes clear read-only", it was successful.then I typed clean and it wasn't successful. Tried again and still not successful, then I exit. After that my hard drive disappeared. I slot it back to the laptop and it came up blank and not showing anything, even not showing the hp logo from boot. Please someone help me, all my works files and now notebook is blank.🙆🤦
@AmgaaO
Жыл бұрын
Excellent. You have solved my data disk problem. Thanks
@Daniel-Guerrero
2 жыл бұрын
I'm so thankful I tried every page, post and a lot of commands to do this but finally with method 2 I was able to do it, thanks a lot!!!!! ❤️❤️❤️❤️❤️
@TheMasterSplinta
Жыл бұрын
so mad rn i cant find a single solution
@AOMEITech
Жыл бұрын
You have to format the drive to fix RAW to NTFS.
@saifibnmohd
3 жыл бұрын
Format..mmg boleh...we want data before format
@michaelbmw1931
3 жыл бұрын
Exactly
@ugo9248
2 жыл бұрын
The app worked thank you so much, you earn my subscription
@kikgamer1582
3 жыл бұрын
Thanks, you saved. My hard drive , much love from Nigeria
@vince5365
3 жыл бұрын
Don't follow this step blindly cuz this can make more serious problem, i accidentally made my problem worse than before bcz i trust this and follow this instruction blindly
@schweagon8618
2 жыл бұрын
NOOOOOOO I tried to recover all my files without formatting it because I had like 2 years of recordings on there!!!
@mtyp_admiral
2 жыл бұрын
I can't believe it, it's work for me. Thank you 👍
@lamarwealthchild6199
3 жыл бұрын
SCAMMMMMMM you will lose all your data and the she will give you video about buying the program and backing up your data but its too late after you format it
@erinakoiso1337
3 жыл бұрын
Does anyone want to format his disk to solve RAW problem? Formatting can't be taught to us!
@TeacherJeth
4 жыл бұрын
Hello there, How many hours should it take til the formatting done.. Coz i started last night and until now 0 percent.. 13-14 hrs ago..
@iostechy1802
4 жыл бұрын
What the Fk bro
@leonardoputra330
4 жыл бұрын
Probably the drive has many bad sectors that it wont work anymore
@bbrandon.b
4 жыл бұрын
same it doesnt stop formatting for me and once it does it doesnt properly finish, u commented this 4 months ago so hopefully you figured it out but i'm having this problem
@jamesibasco2163
4 жыл бұрын
It stop after i enter CLEAN? PLS HELP
@harikahono
4 жыл бұрын
Anyone can help, why after i run format fs=ntfs label=new quick, then 0 percent completed the volume is not online
@Holocrypic
3 жыл бұрын
Did you find out how to fix it because the same thing is happening for me
@wimarshadidulan2041
3 жыл бұрын
thank you so much you only solve my problem..im am watch too much video's for fix my pen drive
@wimarshadidulan2041
3 жыл бұрын
1k like from me xd
@jpgelderbloem7497
3 жыл бұрын
Thanks , only software that was able to make my raw hdd readable. Not command prompt or windows 10 could fix my problem
@PersonalGamingChannel
2 жыл бұрын
This actually worked! THANK YOU!
@supermami1908
3 жыл бұрын
C:\windows\system32>chkdsk /r f: The type of the file system is NTFS. Unable to determine volume version and state. CHKDSK aborted. Please help!
@supermami1908
3 жыл бұрын
@@AOMEITech I downloaded Partition assistant standard but in advanced check only the third option is available to click. it finds errors but i dont have to option to fix the error. can you provide any help?
@AOMEITech
3 жыл бұрын
@@supermami1908 Plz contact AOMEI support, they will help you figure this out.
@mikiyassolomon9600
2 жыл бұрын
'Sorry, the current operation has been canceled! Information Code: 6 Description:The partition table on the disk was failed to update as the partition table is being locked by other programs, please close other programs and retry'. WHAT DOES IT MEAN ???
@AOMEITech
2 жыл бұрын
Solutions: 1. Please create the “WinPE Bootable Media” with Partition Assistant to do the operation again. The way to create the bootable media: www.diskpart.com/help/make-bootable-cd-wizard.html 2. Please check if the disk or volume status is offline or read-only. If it is, you need to switch them onto Online with Windows Disk Management or Diskpart tool, or to relieve the read-only attribute by Diskpart. 3. Applications that are made to protect the disk and system will occupy or lock the partition table to prevent the system from being damaged. Partition Assistant will be shackled by these programs, so you need to close them then retry the operation. 4. The underlying error of the partition table such as the partition table overlap will lead to an update partition table failure. So you should figure out the errors and then retry the operation. Note: A partition table backup before the problem fixing is recommended. If there is still any problem, please feel free to contact our AOMEI Support Team.
@casilusmani8040
3 жыл бұрын
DISKPART> format fs=ntfs label=new quick 0 percent completed DiskPart has encountered an error: The parameter is incorrect. See the System Event Log for more information. I got an error like these please help me.
After "DISKPART> clean" It says "DiskPart has encountered an error: Access is denied. See the System Event Log for more information." where do I find this event log?
@AOMEITech
2 жыл бұрын
Check this out dear, www.diskpart.com/format-disk/diskpart-has-encountered-an-error-access-is-denied.html
@nikolaininoprado7394
2 жыл бұрын
Hi can I ask, the data is not going to delete or wipe out right? If I will use this methods I badly need the files :< I just need to be NFTS because RAW can't work on CMDS. thank you!!!
@AOMEITech
2 жыл бұрын
If you format the disk the data will be wiped out.
@rjsanga8349
3 жыл бұрын
DiskPart has encountered an error: A device which does not exist was specified. See the System Event Log for more information. that's what is appearing when I put the command clean can you guys help me out
@AOMEITech
3 жыл бұрын
Hi dear, if you’re faced with this issue, you can try the solutions below in no particular order and see if that helps to resolve the issue. 1. Check connectors Make sure that the power connector is firmly attached to the drive. If none are available, maybe even try another SATA power connector from an unused drive, like a DVD. If all connection is properly secure but the error is unresolved, proceed with the next solution. 2. Assign Full Permissions on disk This solution requires you to assign full permissions on the inaccessible disk. Try the next solution if the issue persists. 3. Uninstall/Update disk drivers First, you need to uninstall the disk drivers and then reboot your computer. On boot, Windows will automatically reinstall the disk drivers. Check if the issue is resolved, otherwise, you can try updating the disk drivers and see if that helps. You can either update disk drivers manually via the Device Manager, or you can get the driver updates on the Optional Updates section under Windows Update. You may also download the latest version of the driver from the disk manufacturer’s website. 4. Run CHKDSK You can run CHKDSK to repair bad sectors if that’s what’s triggering the error. 5. Format disk to NTFS Make sure the inaccessible disk is in NTFS format, otherwise you need to format the disk to NTFS or simply convert the disk to NTFS without losing data. 6. Replace Hard Drive At this point, if you have exhausted all possible avenues, you should consider replacing the disk. Hope something helps!
@yurii-jjang5317
3 жыл бұрын
Mine got stuck at 0% when doing the format :/
@Ethandacosta
3 жыл бұрын
Same
@AOMEITech
3 жыл бұрын
This article can help www.diskpart.com/articles/diskpart-has-encountered-an-error-the-parameter-is-incorrect-0310.html
@dineshkashyap1005
3 жыл бұрын
Thanks a ton🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻🙏🏻
@hassi_tech
2 жыл бұрын
after using command of format fs=ntfs quick ,, it shows this error DiskPart has encountered an error: The parameter is incorrect. See the System Event Log for more information. what should i do ?
no works here. i have 5 pendrives with corrupt flash memory
@lidamiliy
2 жыл бұрын
well done thanks so much
@waheedali9055
2 жыл бұрын
Stupid.. totally stupid... you are asking people to clean their disks.. through which they will loose their data. This will create a new partition... it will not recover a partition which went raw from NTFS
@AOMEITech
2 жыл бұрын
But there is no other way to recover a partition that went RAW, the only way is to format the disk, but it is suggested in the video to backup data first, so this is a feasible method.
@Zedroar_Yt
Жыл бұрын
Plz Can anyone help me!! MY Pc automaticly shutdown when i try to Format RAW disk help
@AOMEITech
Жыл бұрын
Never met the issue before
@bala825346dev
4 жыл бұрын
I was struggling and this video made it to work...i did the command prompt way, it works, thanks a million....
@LearnAboutMedicines1
3 жыл бұрын
It’s very helpful Appreciate to you Lots of love 💕 and huge support from INDIA 🇮🇳 (I thought my disk is dead 💀 but now it’s working Successfully ✅)
@rydersimins1637
2 жыл бұрын
Its been at 0% for awhile but im hopeful there was alote of junk on here
@andymoreno1847
Жыл бұрын
I got to attribute the disk but fails after attempting to clean saying "The request failed due to a fatal device hardware failure." Any ideas of what else i can do?
when i tried to do clean it showed this DiskPart has encountered an error: The request failed due to a fatal device hardware error. See the System Event Log for more information.
my external hdd doesnt formatting it keeps on 0% even i did ur way , why is that and what shall i do now? it says diskpart has encountered and error the parameter is incorrect .see the system event log for more information. also i used the app u mentioned and it keeps at 5% forever
@AOMEITech
Жыл бұрын
Do you know if there are bad sectors on the disk? If you are not sure you can use the app to check your disk and fix it first. Here are the steps" 1. Right-click on the partition and select Advance. 2. Click Check Partition. 3. Select the first option.
@cinnamon4730
4 жыл бұрын
Can't access my drive after I reinstall windows and I couldn't format it eventhough the system recognize it, this fix my issue and I'm infinitely thankful.
@Livingrick
2 жыл бұрын
OMG thank you i love you. have my babies!!
@61dizayntasarm-sesmuzikpro4
3 жыл бұрын
HATA ŞU doğrudan erişim için birim açılamıyor
@AOMEITech
3 жыл бұрын
buna tıklayın ve dilinize çevirin www.diskpart.com/tips-tricks/chkdsk-cannot-open-volume-for-direct-access-0310.html
@petrus6493
Жыл бұрын
may God bless you and you never suffer from any decease anymore. You really saved me with the first method. Thank you!
@AOMEITech
Жыл бұрын
@bwalyabwalya2796
4 жыл бұрын
sweet voice
@gedamtechnollogy4032
2 жыл бұрын
wow great!!!!
@MuhammadIrshad-lz8uk
3 ай бұрын
Can wo do professional tool without data lost.
@GuitarHeroTester
2 жыл бұрын
I followed the steps of the AOMEI assistant and in the end (after the last step) it says “Unallocated” what can I do?
@AOMEITech
2 жыл бұрын
You can allocate the partition manually.
@nakulsajeev1487
3 жыл бұрын
i cannot clean the usb in cmd bcz it shows "DiskPart has encountered an error: Data error (cyclic redundancy check). See the System Event Log for more information." any solution??
@AOMEITech
3 жыл бұрын
This could help www.diskpart.com/articles/diskpart-has-encountered-an-error-data-error-8523.html
@nakulsajeev1487
3 жыл бұрын
@@AOMEITech it doesn't helped
@samgithinji5299
2 жыл бұрын
Have format my harddisk but still is not showing on my computer please help
@AOMEITech
2 жыл бұрын
Hi there, can you see this disk in disk management?
@JannizZza1994
2 жыл бұрын
Hey is this tut for hdd's which suddenly turned to raw? I mean can I recover the data with this steps? Or will they erased?
@AOMEITech
2 жыл бұрын
Hi dear, your data cannot be recovered through this step, and formatting the disk will cause data loss.
@m.mlf.b3680
3 жыл бұрын
im install the app but it cant finish the proceed ,its go only up to 5% what is reason here..??thank u
@AOMEITech
3 жыл бұрын
Got it, you can contact AOMEI support team, they can help you fix this.
@iskendersisman
2 жыл бұрын
thanks for the video. I can not "convert mbr" because it says "Virtual Disk Service error: The specified disk is not a convertible disk." what should i do now? thanks again have a nice day.
@AOMEITech
2 жыл бұрын
Hello, you can refer to this article: www.diskpart.com/gpt-mbr/specified-disk-not-convertible-4348.html
@iskendersisman
2 жыл бұрын
@@AOMEITech thank you so much
@JerryAey
2 жыл бұрын
Awesome!
@jojithomas7068
4 ай бұрын
Thanks a lot!!🙏 It worked !!😁
@cartooninctamil6785
2 жыл бұрын
Did formatting partition Erase our data?
@smoxesss
3 жыл бұрын
type format in search click look at drives format create new volume 2 clicks away not all this mess
@AOMEITech
3 жыл бұрын
What do you mean dear?
@z_xf26
2 жыл бұрын
Thank you, this worked like a charm
@iswarrand.sivaraj6262
3 жыл бұрын
Is. Not working is encountered a error
@augustharbll2872
3 жыл бұрын
my external hard drive deleted my games and is now unregistered because of the first method
@AOMEITech
3 жыл бұрын
Hi dear, formatting will delete your data on the disk so you'd better make a backup before formatting.
@idrisalnamani1504
2 жыл бұрын
i have problem with my hard drive which cannot be format and gives me I/0 device error "volume 0 is RAW" and when ever i connect it to the pc it makes the pc slow i think bcz there is a virus (could you help me fix it?)
@petko5335
2 жыл бұрын
I've did this multiple times and it is always the same result: "DiskPart has encountered an error: The parameter is incorrect." Even after double checking it's still the same. Anything that I should be doing more?
@AOMEITech
2 жыл бұрын
You may do a surface test to see if the disk has physical damage. I think it is probably due to the bad sectors if you've tried Run Chkdsk scan & Run SFC scan but didn't work. Here is an article about this issue: www.thewindowsclub.com/diskpart-has-encountered-an-error-the-parameter-is-incorrect
@petko5335
2 жыл бұрын
@@AOMEITech Thank you for the fast response. I did this multiple times but the disk sometimes did not even show up in the formatting tab, I got a friend to help me and he told me to manually scan it. I did as he told and repeated all the steps included in your video and it somehow worked. Thank you!
@AOMEITech
2 жыл бұрын
@@petko5335
@kumawatanisha
4 жыл бұрын
So my nightmare, I by mistake formatted my husband's office external hard drive. Please help me out. How to retrieve the data. The HD was in NTFS and then I erased everything and formatted it to ExFAT and uploaded my data. Please please show me the route to get everything back.
@petermakaumutuku9150
5 ай бұрын
What if you lose all your data ?
@mathanmugesh2036
3 жыл бұрын
Very thanks for your idea thank you very much
@skygazer2678
3 жыл бұрын
List disk command does not work
@greyarea8373
3 жыл бұрын
After format fs=NTFS line,I am getting "diskpart has encountered an error: the parameter is incorrect.see the system event log for more information." Pls help me
@kauserkhan9029
Жыл бұрын
Thank you So much, I think My Hard drive life is end, But you solve my problem
@Kameron.
3 жыл бұрын
bro the parameter is incorrect
@boostedej6
3 жыл бұрын
i did this but it still shows as unformatted -_- lol
@AOMEITech
3 жыл бұрын
Which method did you use?
@danielchylek7289
3 жыл бұрын
Thank you. I thought my disk is dead and now is working great!
@Odoggin01
3 жыл бұрын
my raw drive doesnt even show up in list disk
@AOMEITech
3 жыл бұрын
You can check the status of it in disk management is it not initialized or some what
@HiteshRathva2
3 жыл бұрын
It showing device disconnected while cleaning what to to I tried many time
Пікірлер: 458