Tip: While sanding never go in curcular motions. Stright scraches are much easier to remove then circular scraches.
@jakec5618
7 ай бұрын
Why didn't you just use the white tip which is supposed to be used for sanding/prep ?
@MoisesEmpire
7 ай бұрын
I tried it but to me a small piece of sand paper worked better.
@SimonAbrams
3 жыл бұрын
Holy smokes, that is amazing. Can't believe how good that looks. Best video on how to do this by far.
@wanaraz
2 ай бұрын
The white tip on that is for small rust sanding. Also the bottom grey part on the touch up is CLEAR paint. After touch up you apply the clear.
@didodominguez958
11 ай бұрын
When do you apply the clear coat? Is it after you sand it out smooth or after the paint is corrected with compound/swirl remover. Can you advise.😅
@matts.4095
3 жыл бұрын
I tried this did exactly what you said bought the same products... Did by hand just like you did it's extremely hard to get out the fade marks from wet sanding I used the compound worked on it for over an hour and it just made it slightly better but you can still see the marks where I wet sanded... My only option is now to bring it to a professional with the high speed buffer.
@MoisesEmpire
3 жыл бұрын
Yeah a buffer/polisher will work for sure but it might be cheaper to buy one instead of going to a professional detailer. And you'll be able to use it in the future. Harborfreight has some for pretty cheap. Ive seen them as low as $40 and a bit better ones for $80 and above.
@loizosnikolaou2864
5 ай бұрын
I run into the same issue. How did you fix it?
@matts.4095
5 ай бұрын
@@loizosnikolaou2864 I didn't, I ended up trading the car in lol
@miguelnunez8560
2 жыл бұрын
This is the best diy video I’ve seen on how to use this touch up pen !!!! Great job :)
@27anton
3 жыл бұрын
Thank you man, your video helped me with a scratch I had in my 2016 green civic coupe, peace from Mexico!
@DN-ki9bw
3 жыл бұрын
Thank you for taking the time to upload this video it help taking the scratches off my car beautifully
@MoisesEmpire
3 жыл бұрын
Awesome! Im glad I was able to help you!!
@kevinbatista1278
2 жыл бұрын
awesome video man, i can now fix a rock chip on my fender on my HRV, i was disappointed seeing that chip too
@hondamanvtec2894
2 жыл бұрын
I find the Sonic grey pearl color really difficult to get this good looking when filling in scratches and rockchips
@MoisesEmpire
2 жыл бұрын
Yeah its definitely not easy to fix
@travel_passion01
2 жыл бұрын
Hi @Moises Empire, It is a nice video but I little bit confused with the steps for minor scratches? Will you please correct the steps ? , if something is wrong 1. Clean the surface (No sandpaper is required? ) 2. Apply the paint 3. Apply compound 4. Clean with sandpaper (1000 number) ? 5. It seems , polish is for shining so it is not required.
@travel_passion01
2 жыл бұрын
Thanks for quick response, so are these steps good ?
@MoisesEmpire
2 жыл бұрын
1. Clean (rubbing alcohol with a rag) 2. Apply paint 3. Wet sand to smooth out paint with 1000 4. Compound 5. (If needed) add clear coat 6. Wet sand clear coat to smooth it out with 2000 paper 7. Compound 8. Polish.
@travel_passion01
2 жыл бұрын
@@MoisesEmpire Thanks a lot for quick response .Appreciated.
@ourtopfavorites
Жыл бұрын
@@MoisesEmpire wait, but you have to sand before applying paint, right? Like you did on the video. Thanks
@MoisesEmpire
Жыл бұрын
Yes it's recommended to help the paint stick to the car better.
@IJones
9 ай бұрын
I need you to come over and do my car! Same color, sonic grey pearl. I'm trying to do it. I got to add more paint. thanks for this!
@brokentissuebox
2 жыл бұрын
Omg thank you! , I just bought the new 11th gen civic hatchback touring and I already got a small paint chip in the front.... probably gonna try this out.
@MoisesEmpire
2 жыл бұрын
Your welcome but chips will keep happening. I suggest u look into ppf after you fix the chip.
@brokentissuebox
2 жыл бұрын
@@MoisesEmpire Yeah I was planning on getting some but this crap had to happen first xP
@MoisesEmpire
2 жыл бұрын
Yeah man honda paint is super thin. Chips and scratches very easily.
@brokentissuebox
2 жыл бұрын
@@MoisesEmpire so around 6:48 did you already apply the clear coat?
@MoisesEmpire
2 жыл бұрын
@@brokentissuebox I skipped the clear coat since my chips were very small.
@Anonymous-gu2js
2 жыл бұрын
After filling in the rock chips with paint and letting it dry for 30 minutes or so, did you wet sand with 1000 grit, then apply another layer of paint, let it dry again for 30 minutes, and then wet sand again with 2000 grit before applying compound and mirror glaze?
@MoisesEmpire
2 жыл бұрын
Yup sounds about right. Been a long time since I did it lol.
@benedettolucchese8110
3 жыл бұрын
This video was super helpful thank you
@MoisesEmpire
3 жыл бұрын
Your welcome. Glad I could help.
@bigashdawg
3 жыл бұрын
Thanks man. You just helped me touch up the chips on my 06 Accord V6. Good Video
@MoisesEmpire
3 жыл бұрын
That's awesome! Glad I could help!
@andrewramirez6903
Жыл бұрын
Wow great video !! The best video on how to fix rock chips you saved me!
@MoisesEmpire
Жыл бұрын
Thanks! Glad I could help!
@jacobbernal3757
3 жыл бұрын
Thanks bro!!! Buying one for my civic and pilot!!! They need a touch up
@Bossjedi
5 ай бұрын
nice!!!!! my sonic grey accord has the tiniest scratch on it but this video gave a a ton of hope! only think is my car has a ceramic coating, do you think i should follow all these steps and just as alittle ceramic coating wear i did repair?
@MoisesEmpire
5 ай бұрын
Yeah thats what I would do
@redlime2212
2 жыл бұрын
Thank you for a great video and tips on the Ultimate Compound and Swirl Remover! Would love to see how you actually did the wet sanding in close up though, did you use circular motion? Also, did you end up using the clear coat that was part the touch-up pen? Best video I have seen on DIY paint chips repair!
@MoisesEmpire
Жыл бұрын
Thanks! I sanded in circular motion and no i did not use clear coat since my chips were small. But I do recommend using the clear.
@crazycardz1
3 жыл бұрын
Isn't that touch up pen the tip on the cap...isn't that to used to clean out those small scratches
@MoisesEmpire
3 жыл бұрын
Yes but sometimes it dont work to good
@Steele9026
3 жыл бұрын
i unfortunetly sanding down with 1k grit sanded down the side of the chip down to the primer and im pissed and frustrated
@MoisesEmpire
3 жыл бұрын
Thats ok. The paint will cover it up. My roof chip was all the way down to the metal and was even starting to rust.
@davidpadilla5614
2 жыл бұрын
Great Video! Does the compound fade after a few weeks/months? I feel like its a floor wax where it looks great when you first apply, but after a while, it fades away and you'll see all those light scratches you put on it with the sandpaper again (like at timestamp 6:53).
@MoisesEmpire
2 жыл бұрын
When applied correctly it will not fade.
@thealphascan
2 жыл бұрын
What an amazing video, probably the best one out there for touchups by far.... Do you use the clear coat included with the pen at all?
@MoisesEmpire
2 жыл бұрын
Thanks!! I did not use clear because my chips were really small. I recommend the clear for big chips and scratches.
@thealphascan
2 жыл бұрын
@@MoisesEmpire Thanks for the quick response bro! My scratches are very similar to yours so I'm pretty excited to give this a go over the weekend (now that you've given me the courage). Thanks so much for taking the time to share your knowledge and expertise.
@thealphascan
2 жыл бұрын
Hi again, I have one scratch that's a bit deep. If I am using your method should I use the clear coat -> sand -> compound -> polish. Is that the correct sequence.
@MoisesEmpire
2 жыл бұрын
@@thealphascan yes thats correct.
@thealphascan
2 жыл бұрын
@@MoisesEmpire thanks man, will report back :)
@jonathannunez3330
2 жыл бұрын
Hey bro, you said that the 2500 sand didn’t work, did u use the 1000 or 2000 to get the job done ?
@MoisesEmpire
2 жыл бұрын
I think 1 did 1000 and then 2000
@jonathannunez3330
2 жыл бұрын
Oh ok bro, thanks!
@eccentriczombie5416
Ай бұрын
Link below for the Honda website you used, please.
@MoisesEmpire
Ай бұрын
I got it on ebay cuz its was a little cheaper then the dealer at the time. Not aure about now. This video is over 4 years old
@ynrt_5.772
3 жыл бұрын
Awesome job looks great....I definitely need this done for a few spots on my hood.....good vid subbed 👍🏽👍🏽
@MoisesEmpire
3 жыл бұрын
Thanks!!
@Redscar89
3 жыл бұрын
Moises would you say the 1500 grit can that work also I didn’t find any 1000 at the store let me know please ?
@MoisesEmpire
3 жыл бұрын
@@Redscar89 yeah that will work. Just might have to apply a little more pressure when sanding since 1500 is smoother then 1000.
@Redscar89
3 жыл бұрын
Okay cool thanks a lot man appreciate you this video helped a lot so first the compound then the polish to finish it ?
@MoisesEmpire
3 жыл бұрын
@@Redscar89 yup, u got it. If you have a polishing machine it will be much easier but if you don't have one then by hand is fine like I did in the video. Just takes a little more physical work lol.
@Blazed_Flex
2 жыл бұрын
Would this work for Hondas metallic paint? I feel like the simple colors it would work best on, but metallic shows a lot so idk if it’ll work for me
@MoisesEmpire
2 жыл бұрын
If using a pen like mine then yes because the paint is pre mixed. My sonic gray pearl color has a ton of green pearl in it and it worked great.
@mjaneo143
3 жыл бұрын
Can I just skip the first time you sanded it out and go straight to applying the touch up paint then wet sand with 1000 and 1200 grit after?
@MoisesEmpire
3 жыл бұрын
If the area is well cleaned, yes that would be fine. I had to do it because I had some rust in the metal.
@dbrown271983
2 жыл бұрын
Will it work on fade marks? I ran through paint and tried taking it off and now there are dull buff on my hood...
@MoisesEmpire
2 жыл бұрын
Honestly ive never tried it on that but I doubt it will work good for that. Since your trying to remove something I would try wet sanding softly with a really high grit paper and then a good compound and buff like i use in the video.
@honestnewsnet
Ай бұрын
You didn’t apply any clearcoat?
@MoisesEmpire
Ай бұрын
No but you should.
@Dman67106
3 жыл бұрын
Thanks for this video!!! Super helpful!
@harrmony
3 жыл бұрын
Thank you for this video bro. Do you think i should sand it in the beginning if there is no rust?
@MoisesEmpire
3 жыл бұрын
If no rust then no. Just make sure its really clean and dirt free. I recommend cleaning with some rubbing alcohol then wait like 5 to 10 minutes for it to fully dry before you add paint.
@harrmony
3 жыл бұрын
Thanks a lot. You are a straight g.
@afroboriqua
3 жыл бұрын
Great video this helps alot. Is the clear coat applied after using the Meguirs compound and mirror glaze?
@MoisesEmpire
3 жыл бұрын
Yes. Clear is done after paint looks perfect and you dont see any sanding marks. Sanding marks will show through the clear if not buffed out.
@afroboriqua
3 жыл бұрын
@@MoisesEmpire thanks alot for the help my man!
@afroboriqua
3 жыл бұрын
@@MoisesEmpire Hey did you use the paint brush at all or just the pen tip?
@MoisesEmpire
3 жыл бұрын
@@afroboriqua just the pen tip because my chips were small. Had i used the brush, I would of ended up with to much paint on the car. Brush is more for long scratches.
@ck1319
3 жыл бұрын
That is incorrect. The instructions on the paint pen from Honda is to fill the chip, wait 10-15 minutes for paint to dry, then apply clear coat. If you sand the paint, then polish, then add clear coat and then polish again, you are now cutting more into the clear coat of the surrounding area of the chip for no reason. Fill the chip with paint, let it dry and then seal it with clear coat. Paint and clear coat levels are different by make and model. But keep in mind you only have about the same thickness as a sheet of paper. Simple trick that I’ve used for years now is to take a small plastic Coke bottle cap, mix half paint and half clear coat at 50/50 ratio, stir and mix until the texture is almost like syrup, take the pointed end of a toothpick to dab the paint and let the chip fill as needed, let it dry, sand it down even and then compound and polish. No car wash or other coatings for 30 days. Not knocking on this video. If your result was great then so be it. But the paint and then clear after is instructions on the paint pen.
@donaldthomason4588
5 ай бұрын
Did you apply the clear coat before wet sanding?
@5.0Steveo
3 жыл бұрын
Hey brotha I know this isn’t the most recent vid but where did you get those carbon pillar post overlays ? Plz lmk trying to find some but can’t
@MoisesEmpire
3 жыл бұрын
Heres a link. Right now they have sedan and coupe. Hatchback is currently sold out. www.synthcarbon.com/collections/frontpage/products/copy-of-carbon-fiber-steering-wheel-add-ons-for-2016-civic-x?variant=32810269999179
@5.0Steveo
3 жыл бұрын
@@MoisesEmpire Fosho thanks my guy
@SimonAbrams
3 жыл бұрын
quick question - did you apply clear coat? was that before you sanded it?
@MoisesEmpire
3 жыл бұрын
I did not but clear would be last step after paint looks perfect.
@corywendling8244
Жыл бұрын
What kind of pad are you using for this to wipe on the products?
@MoisesEmpire
Жыл бұрын
Its a Microfiber pad
@kaushikk4636
2 жыл бұрын
Hi, if you don't have rust then no need to do the sanding, right? In the case the steps would be clean first, then paint and clear coat is sufficient? Thanks
@MoisesEmpire
2 жыл бұрын
If you don't have rust then u do not need to sand BEFORE adding paint BUT you WILL have to do the other sanding steps that come after the paint and after the clear coat. If you don't sand, it's likely it won't be an even surface and you'll end up with a noticeable hump of paint.
@tylergaudette6394
2 жыл бұрын
i never saw you use clear coat. did you apply it at all?
@MoisesEmpire
2 жыл бұрын
I did not because my chips were so small I felt like I didn't need to bother with it. But clear would be last step after paint looks perfect.
@artisanbusiness1314
Жыл бұрын
TIP: Use ironx to remove the rust.
@MoisesEmpire
Жыл бұрын
Ill try that next time. Thanks.
@demetriskouvaros6934
3 жыл бұрын
can you please give me the link of your paint pen please? Same color like yours
@MoisesEmpire
3 жыл бұрын
www.ebay.com/itm/292897314670
@demetriskouvaros6934
3 жыл бұрын
@@MoisesEmpire thank you very much
@Ax7Snow
2 жыл бұрын
Can you link the products you used
@MoisesEmpire
2 жыл бұрын
Yeah ofcourse. Here they are. www.walmart.com/ip/16550255 www.walmart.com/ip/463798804
@Ax7Snow
2 жыл бұрын
@@MoisesEmpire word thanks g
@thatChillLife2037
Жыл бұрын
Love the video :) Thanks!
@andrewlinton8528
2 жыл бұрын
When you sand it after letting the paint dry, you wet sand it right?
@MoisesEmpire
2 жыл бұрын
Yes
@andrewlinton8528
2 жыл бұрын
What step would you apply the clear coat and then what step is next?
@MoisesEmpire
2 жыл бұрын
Clear coat would be after paint is done and looks perfect. After the clear coat dries fully U follow the same steps as after paint. Gently wet sand the clear to even it out and then buff the area to an amazing shine.
@mikek1009
2 жыл бұрын
I know this is late, hoping you can help me. I was planning to do this same way with my white orchid pearl 16 accord. Some people are saying not to wet sand the touch up paint to get the blob down smooth because the pearl will dull. It looks to have worked fine for u. Do u think wet sanding the pearl with either 1-3000 would make it dull?
@MoisesEmpire
2 жыл бұрын
It shouldn't make it dull, especially since the clear coat protects the paint, but if it does then it probably wouldn't be to bad in your case since its white paint. Im not 100% sure but I would think that white can't really get dull. You could also always just try it first on a smaller chip and see how it goes.
@mikek1009
2 жыл бұрын
Thanks for the quick reply. I was just gonna wet sand the pearl smooth to surrounding paint, wash it, hit it with some clear, wet sand the clear buff and wax. Sound about right? Awesome video by the way.. turned out nice
@MoisesEmpire
2 жыл бұрын
Yup that should work great. Thanks!!
@gracechavez9550
2 жыл бұрын
@@mikek1009 I have the same color! How did it work for you? I’m currently about to sand it a bit
@mikek1009
2 жыл бұрын
Mine did not turn out well. The touch up pen cannot duplicate the pearl well enough. Mine turned out to silvery. When I talked to the body shop they said because of the pearl it needs pressure behind it to coat evenly and properly..I used OEM Honda white orchid. Did not turn out good at all. For really small chips maybe u can get away with it, but large chips will need to be re sprayed..
@sacredsteezz2608
Жыл бұрын
Thank you!!
@rgl9649
2 жыл бұрын
Paint protection film would fix all that
@MoisesEmpire
2 жыл бұрын
It won't fix the chips but it'll prevent new ones lol. I do now have ppf on front bumper, headlight, grill, hood, side mirrors and door handles since they are carbon fiber. I can't decide if I wanna ppf the roof or wrap it in black.
@user-el3wv6zm3j
Жыл бұрын
I tried doing everything you said and did. But for some reason my paint is showing up a lot darker than I’d like. The paint sticks out. I even wet sanded it and used the same compound. Which made it smooth and blended a shine back. But the paint is still a lot darker on the chip. I got it from a Honda dealership. Sonic pearl grey.. why do you think it looks so dark??? Cause you even applied alot of paint to hide the indent. Any ideas behind that??
@MoisesEmpire
Жыл бұрын
When metallic or pearl finish paints are sprayed, these flakes are consistently aligned and the finish reflects light accordingly. When such paints are brushed on, these flakes can lay in the paint differently, causing less light to be reflected. This appears darker. It is recommended that you apply another coat (if necessary, polish the existing top coat down a bit to make room for the new coat). Try to brush this coat on lightly. Then polish it, clear it, and polish and wax the clear. That should help reduce this dark effect.
@user-el3wv6zm3j
Жыл бұрын
Okay thanks! I’ll just spend more time on it. I’ll try to clear out the paint a bit more than use a lighter technique on the spots. Then do the polish and everything again.
@BarelaLures
Жыл бұрын
Also sounds like, if your car is older it may be faded. They have a scanner to get the right color paint to match your current, and actual color tone/tint/shade.
@loizosnikolaou2864
5 ай бұрын
Same here. How did you end up fixing it?
@SinghSingh-ci5yc
Жыл бұрын
Wow! Same spots on top as mine. Honda needs to put more coats on. This is shameful.
@MoisesEmpire
Жыл бұрын
Yeah I agree.
@MrSibugryan
3 жыл бұрын
When did you put the clear coat?
@MoisesEmpire
3 жыл бұрын
I didn't lol. My chips were really small so I didnt bother. But clear would be the last step after paint is on buffed and perfectly smooth.
@shenellblake-tropicalmom5578
3 жыл бұрын
Can you list the sand papers in the order of use
@MoisesEmpire
3 жыл бұрын
Yeah, you wanna go from low number to high number. Start with 900 to clean out the chip and smooth it out a bit. Then after u add the paint you'll wanna wet sand the paint with 1000 grit. Then one more time wet sand with 1200 grit. Then should be done and will just need to buff the car with a compound like the one I use in the video.
@TOMA-ny7gg
3 жыл бұрын
@@MoisesEmpire butu said 2000 wet grit after the 1000 no?
@MoisesEmpire
3 жыл бұрын
@@TOMA-ny7gg yes
@TOMA-ny7gg
3 жыл бұрын
@@MoisesEmpire thanks
@peted7687
2 жыл бұрын
Aweeome bro thank you!
@roberthelman2379
3 жыл бұрын
Did you try to use the clearcoat before you bust it out?
@MoisesEmpire
3 жыл бұрын
U buff first to get rid of the sanding marks then clear. Clear is used after paint looks perfect.
@genecoppin8145
3 ай бұрын
Nice video, thanks.
@wandachhea4473
2 жыл бұрын
I wish you would've showed the sanding instead of skipping over how you did it...
@MoisesEmpire
2 жыл бұрын
Sorry. I thought that might be boring to watch. But u just have to gently rub the wet sand paper on the car till its nice and smooth.
@JohnBham79
3 жыл бұрын
Did you use the clear coat from the touch up paint? My paint pen for my Honda has the paint on one end, and clear coat on the opposite end.
@MoisesEmpire
3 жыл бұрын
Yes. The one from the pen works good.
@Steele9026
3 жыл бұрын
@@MoisesEmpire when do u use the clear coat??? after u dab the paint and sand it or before u sand it?
@MoisesEmpire
3 жыл бұрын
@@Steele9026 clear is last step after u sand the paint and get it nice and smooth. You want the paint to be perfect before u clear.
@Sweetness092
3 жыл бұрын
Can I do this without sandpaper?
@MoisesEmpire
3 жыл бұрын
You can but it'll be a noticeable bump of paint. It wont be smooth and even with the rest of the car.
@Sweetness092
3 жыл бұрын
@@MoisesEmpire where can I get that sandpaper you used? & can I used the same one u used? I have a white civic 18
@MoisesEmpire
3 жыл бұрын
@@Sweetness092 i got it at Walmart but u should be able to also find some at any auto parts store.
@JoseGarcia-ec8yd
3 жыл бұрын
So after paint no clear ? Cuz u didn’t show that
@MoisesEmpire
3 жыл бұрын
You can do the clear of your want but my chips were so small that I felt like I did not need it and so far its holding up great. If it was a big chip or long scratch then I would recommend the clear.
@makaminetv
Жыл бұрын
parabens e obrigado por compartilhar
@dennisliu520
3 жыл бұрын
Your touch-up pen is Sonic Grey. I have never been able to buy it. I scratched a line in my car. I'm very annoying
@MoisesEmpire
3 жыл бұрын
Any Honda dealer should be able to order it or u can buy it on ebay which is were i got mine.
@dennisliu520
3 жыл бұрын
@@MoisesEmpire thank you very much
@saltycreamy8354
Жыл бұрын
where to buy the paint?
@MoisesEmpire
Жыл бұрын
Dealer or ebay or amazon
@JasonSmallzYT
3 жыл бұрын
This is kinda confusing. Can you put the steps in the comments somewhere
@MoisesEmpire
3 жыл бұрын
Clean first. Sand if you have rust. Clean again. Paint and let dry. Wet sand to even out the paint you just added. Then use compound to remove sanding marks. And last step is to buff with a good polish.
@JasonSmallzYT
3 жыл бұрын
@@MoisesEmpire thank you! I’m currently in the process of doing this on my 2020 si coupe in pearl white!
@MoisesEmpire
3 жыл бұрын
@@JasonSmallzYT your welcome! Good luck.
@witsarutthongphakdee512
3 жыл бұрын
When is the clear coat step
@MoisesEmpire
3 жыл бұрын
@@witsarutthongphakdee512 after u wet sand the paint that u added. Add some clear and then sand the clear so its all nice and even.
@jlover911
2 жыл бұрын
my ‘99 and ‘09 accord never chipped or had chips!!! never!
@MoisesEmpire
2 жыл бұрын
The good old days haha.
@pgup269
2 жыл бұрын
qq: when and the paint, it remove the paint as well, how to prevent that?
@MoisesEmpire
2 жыл бұрын
I'm sorry I don't understand what your question is.
@pgup269
2 жыл бұрын
@@MoisesEmpire Sorry typo... I mean when sand the car, it may also remove the pain as well. Do you know how to prevent it?
@MoisesEmpire
2 жыл бұрын
Its wet sanding so make sure sandpaper is really wet and rub lightly till u get it where u want it. Dont be aggressive
@pgup269
2 жыл бұрын
@@MoisesEmpire That makes sense! I did the dry sanding and it was messed up. Thanks so much!
@Oplix
2 жыл бұрын
The first part of using sandpaper was completely unnecessary and did more damage than it fixed. This is why the pen itself has a tip which removes rust.
@MoisesEmpire
2 жыл бұрын
Sorry it didn't work out for u. The pens tip wasn't working for me so i had to use the sand paper and it worked great for me.
@kruno45
3 жыл бұрын
I love Honda have had 2 vehicles but their paint is absolute garbage. Have 14,000 km on my car and chips everywhere.
@MoisesEmpire
3 жыл бұрын
Yeah its ridiculous. I had my front bumper and hood covered with paint protection film because of that.
@DaKurupt19
2 жыл бұрын
Hows it looking after a year or so?
@MoisesEmpire
2 жыл бұрын
Not to bad. If u get really close on a nice sunny day, u can see a bit of a difference in the color but you touch it and its all smooth and even. Definitely better then a rusty hole lol.
@stephenpetracca7930
3 жыл бұрын
Nice shirt
@THEPECKONATOR
3 жыл бұрын
Paint on these cars chipping so easily is putting me off from getting one.
@MoisesEmpire
3 жыл бұрын
Definitely is a down side. I had my front bumper and hood covered with PPF because of it.
@THEPECKONATOR
3 жыл бұрын
@@MoisesEmpire I've literally just been looking into options for it, but would be tempted to get the whole car done. How much did it cost for your front end?
@MoisesEmpire
3 жыл бұрын
I bought the kit on ebay for like $250 and did it myself but I know shops in my area that charge between $1,000 to $1,500 for just the front of the car. Basically from front bumper to the side mirrors and partial roof.
@THEPECKONATOR
3 жыл бұрын
@@MoisesEmpire I found this video pretty easy to follow, and eased my a little bit knowing they're fairly easy to touch up, thought about doing a video on PPF?
@MoisesEmpire
3 жыл бұрын
@@THEPECKONATOR I might. Need to PPF my new carbon fiber side mirrors
@ShuffIePath
Жыл бұрын
holy crap just do what you gotta do you talk too much
@richganzel9248
3 жыл бұрын
Did you apply the clear coat before the polish?
@MoisesEmpire
3 жыл бұрын
No. Clear is after polish. Paint needs to look perfect before applying clear.
Пікірлер: 192