Update: the Dryer in this video ended up leaking gas, needing a Valve replacement. The Belt also needed to be replaced. Due to the cost in parts, I decided it was time to replace the set: kzitem.info/news/bejne/xaamzqSAs3WbjKw
@ahshan1234
Жыл бұрын
Very well explained video! Will try to fix my mom lg washer that had started to do the banging and jumping! Thank you!
@kallasj
Жыл бұрын
Thank you very much for the detailed instructions. Even though I don't have the exact Samsung model as the one you demonstrated with it was close enough. I was able to successfully disassemble my washer, replace the spider arm, shocks and rubber door boot by following your video. Very much appreciated, thank you!
@JamesFixIt
Жыл бұрын
Wow, glad to hear that you were able to replace all of those parts! Thank you!
@mweimorts
Жыл бұрын
Excellent video. Well-organized and well-edited. I will follow it closely as i do this repair. Thank you for spending the time to create and post this detailed and helpful video. This just what I will need to get my Samsung humming again.
@JamesFixIt
Жыл бұрын
Glad it was helpful!
@stevenrogers2632
Жыл бұрын
All the other videos just tell you to buy another washer. Thanks for taking the time to educate. Enjoyed the video
@JamesFixIt
Жыл бұрын
Glad it was helpful!
@joshuageorge7758
Жыл бұрын
Only real men fix their shit. I fix mine then throw it away. Just makes more sense, why put something at the curb that doesn’t work. Junkers wouldn’t like that too much. 🤣
@JamesFixIt
2 жыл бұрын
In case time stamps are not showing up: 0:00 - Introduction 3:09 - What Parts Did I Replace? 4:30 - What Tools Are Needed For This Job? 5:12 - How to Disassemble The Washing Machine 9:28 - Disassembly to Access the Spider Arm 12:20 - How to Install the Spider Arm and Bearings 14:59 - How to Reassemble
@multicyclist
Жыл бұрын
Good video and well explained. I think running the washer with bad shocks contributes to the spider failure due extra shaking of the drum. This causes extra forces on the spider due to shaking. I am thinking a good thing to do would be to replace shocks at the first sign of increased vibration or perhaps every three or so years as a preventative maintenance.
@JamesFixIt
Жыл бұрын
Good theory and bad shocks can definitely cause premature cracks and pressure on the spider arm! 👍🏽
@JamesAutoDude
8 ай бұрын
I would just replace them on a set interval cuz by that time it's probably too late
@ivanrios1051
3 ай бұрын
Awesome Video. Had not seen this video and eneded up replacing the shocks with no resolve. Problem exactly as you mentioned. Gracias! :)
@JamesFixIt
3 ай бұрын
Welcome! I too replaced my shocks initially, with no change except having a lighter wallet lol 😭
@gregoryreoyo4480
Жыл бұрын
Thanks for taking the time to post this video. This is what real community service looks like!
@JamesFixIt
Жыл бұрын
Awesome comment right here and thank you!
@Maurice9524Chicago
Ай бұрын
Great job. Thanks for sharing
@pabloj3
Жыл бұрын
Thanks for the video! I had the same issue on mine, fixed it, like new again. Thanks to you!! SO dirty inside, took me longer cleaning the muck then it took me to take it apart/put it back together.
@Squishmallows24
5 ай бұрын
Repair costs are so ridiculous nowadays. How do they charge $600 for a $800 machine!? I might as well just buy a new one lol
@JamesFixIt
5 ай бұрын
lol yup!!! Actually, the belt on this one snapped, and the valve was leaking gas. I finally gave in and replaced this unit due to the cost of parts! (Check out my latest Samsung video)
@samisulaiman7967
5 ай бұрын
thanks a lot I bought a new LG washing machine 22KG direct drive top laoding but I am trying to balance level and stabilize it but there is no directional info in the user manual that came with it and also the top surface is curved so can you help me thanks in advance .
@belleridg7495
Жыл бұрын
Thank you for posting these directions. This is exactly my problem. Now that I have it taken apart, my Spider Arm is completely in pieces. Wish I could post pictures, its a mess. The only thing I wish I would have ordered at the time was the door diaphragm. Just ordered it, could have everything back together tomorrow, but have to wait for that new seal. The old one is gross... These directions are super helpful.
@JamesFixIt
Жыл бұрын
Glad you were able to fix the issue! I guess I am lucky that my spider arm only had a single break :D
@northwestrepair
7 ай бұрын
anyway to diagnose this without taking it apart ?
@JamesFixIt
7 ай бұрын
If you rotate the drum by hand and it sinks in a certain spot, the spider arm is most likely toast.
@VagaBond-m6w
3 ай бұрын
I found you to be very informative. NO music is necessary to keep the viewer interested; I'd rather concentrate on your message and learn. :)
@JamesFixIt
2 ай бұрын
Thanks for the tip!
@jonasesguerra6738
Жыл бұрын
Hi James, quick question, Is the Shaft removable? meaning the middle shaft where the bearing attach. Thanks a lot.
@threethousandyen
Жыл бұрын
Thanks for this video. It was really helpful for repairing my WF200ANW washer. A couple of notes. The gasket in the WF220 is a bit different from most other Samsung washers and is not sold separately. They expect you to buy the whole rear tub! So I reused it but added silicone grease to help get more life out of the seal. Also, when reassembling the control panel I plugged the thermistor into the wrong (but same size) connector leading to a t3 error. Other setups may vary so take photos of everything as you're disassembling to have a reference for what goes where. Good luck to everyone else doing this repair. It's not so difficult but will leave you achy the next day.
@russwood5240
2 ай бұрын
Hello, I have a Samsung WF42H5000AW/A2. The drum wobbles a shakes when trying to start the spin cycle. As it's trying to spin, it seems to rebalance and tries to start the spin again and again and again. The is a knocking sound as as the drum wobbles out of balance. I replace all 4 of the shock with the correct one "B" in the rear. I can hear the shocks trying absorb the drum system. I do wonder if i have a bad order. the 2 I wonder if it balancing ring as it look like it damaged around the edges from the excessive knocking. The 2 heavy spring the hold the drum system look ok/. What are you thoughts? Thank you so much!
@JamesFixIt
2 ай бұрын
That sounds like the same problem I had in this video; broken spider arm. Does the drum wobble when you try rotating it by hand, even when empty?
@GregoryHofstetter
8 ай бұрын
Huge thanks for making this video! I was able to follow your instructions & use your links to get the parts that I needed and get my washing machine back up and running. I don't think I would have tried the repair without your excellent video so thanks again! If anyone else does this, but finds that your machine is still behaving badly after replacing the spider arm and will not enter the spin cycle - I also had to replace the rotor position sensor (samsung p/n DC31-00098A) which was $11 on Amazon. Machine is running like new now. Thanks again James!!!
@JamesFixIt
8 ай бұрын
Awesome to hear! Thank you for mentioning the rotor position sensor, and that's great that it's so cheap!
@robenustolesa1021
Жыл бұрын
I'm having issue with on eif the leveling leg, where the bolt goes doesn't have the grove where bolts is tightened on what should I do ?
@Tony-rl2fr
16 күн бұрын
Great job, young man. You are very easy to watch and listen to. Thank you for this detailed video. Great information and presentation.
@JamesFixIt
14 күн бұрын
Thank you!!! 🙏🏽
@timgreer6113
4 ай бұрын
I have this exact same washer, I replaced the spider shaft , and shocks and it still shakes pretty bad. Does anyone have advice about how and why this machine is still doing this?
@JamesFixIt
4 ай бұрын
Did you replace the bearings also (there are 2 of them)? That could be the culprit. Otherwise, the entire drum could be out of round…
@keilder8543
2 жыл бұрын
Good video, nicely done! Ours doesn't hammer as hard as yours did, and it doesn't wobble when we turn it manually, so I'm just hoping that new shocks will make our 8 year old Samsung front loader purr like new... I would also recommend re-calibrating the washer after you've done all that work. Takes les than a minute.
@JamesFixIt
2 жыл бұрын
Great info and that does sound like a shock issue. Thanks and will look into the recalibration!
@mass2293
6 ай бұрын
Do I have to get the exact same spider arm or do they all come in the same size? Thank you for the video!
@JamesFixIt
5 ай бұрын
You'll need to get one that is compatible with your washer model. There are different models/sizes...
@oscarcitoj76
2 жыл бұрын
Awesome video thanks just like a professional
@JamesFixIt
2 жыл бұрын
Thank you for the great feedback!
@NaturebyGus
2 жыл бұрын
Amazing video and detailed steps. Thanks for taking the time to do this.
@ToddEdmondson
Жыл бұрын
I did it. Couldn't find the parts on AMZ but found a parts place who had the spider and the bolts which must match. I am putting the front back on again tonight, did the inner rubber boot, kind of tricky but once you see it, it's easy. So hopefully the outside one snaps on easily and all the rest is good. I am likely going to do first load with the top off just to watch closely for any leaks. My units are on the 2nd floor (I know, not a good idea) but they have been working for 12+ years, like your video says and they are big $, not to mention putting these into landfill is not good. So I really appreciate your video, it was great! Thank you, Thank you, Thank you. ps., agree pull it out, fix, then put it back in and take lots of pics with your phones before you take things apart.
@JamesFixIt
Жыл бұрын
Glad you were able to locate the parts and get everything situated. Running the first load with the top off is a great idea! Hope everything went well!
@ToddEdmondson
Жыл бұрын
@@JamesFixIt Washing machine is so good. I don't remember it being this quiet when new. It's smooth and the spin cycle no longer sounds like a missile is about to launch next door. The removal and re install of the spider/balancing and all the screws electronics connectors and drain tubes were mostly logical. took pictures on my way out, wrote down each part I did in order and qty of small screws then put them in magnetic dish. The risky part was re-connecting the white drum (which looked legendary after we cleaned it out) and we didn't have or couldn't locate a gasket. So i made sure the current one was not damaged and I purchased ATV heat gasket seal and put a light bead of that all around (blue stuff like toothpaste). I placed them together and did about a 60% tighten, left it all day when at work, and that night cranked it down tight. It's holding water - not a drop. I think this was about $250 or so for parts and my time but it's rewarding and satisfying to fix things and I have now fixed that dryer heat element and the washer spider. thumbs up.
@Drjtherrien
Жыл бұрын
Nice and concise directions. Thank you. I did this about five years ago and am once again facing this issue and needed a reminder about how to do this. Still cheaper than replacing the entire unit. Good for the wallet and good for the environment! As a materials scientist I have to say that the spider arm is an example of engineering done right. They have to balance (excuse the pun) the opposing requirements for a highly stiff arm while minimizing the chances of brittle failure. They obviously chose to compromise on the brittle failure because it would be much more annoying if the arm were to plastically deform. The harsh environment the arm has to endure does not help the situation, especially when pretty much every light weight alloy is going to be made out of metals that are very reactive. Hmm... I might have to do a video on that after I take apart my washer.
@JamesFixIt
Жыл бұрын
Wow thank you for the information, and I'd definitely like to learn more about the materials. Keep me updated if you end up creating a video on that!
@Drjtherrien
Жыл бұрын
@@JamesFixIt Will do!
@caseymuni4097
9 ай бұрын
Leave the door open and never need to fix that problem again
@simonblunden2151
8 ай бұрын
Great video, but in my experience, Samsung washers are pieces of sh*t. Ours has gone again and just switching brands now
@JamesFixIt
8 ай бұрын
Sorry to hear! We just decided to get a new set after finding a deal too good to pass up. What brand did u end up going with?
@simonblunden2151
8 ай бұрын
@@JamesFixIt went with Electrolux. It was between them and LG. We shall see!
@JamesFixIt
8 ай бұрын
Great choice! I've actually been hearing more about both brands @@simonblunden2151
@mruscfreddles80
5 күн бұрын
sir.. . if i could. . i would recommend you for saint hood. i used your steps. . and got a fabulous result. thank you very much!
@KlitKommando
Жыл бұрын
I bet the fabric softener is the cause of the badly corroded spider arm
@tyniria
Жыл бұрын
while fabric softener definitely causes corrosion, Samsung front loader spider arms (at least within the last ten years) are extremely notorious for breaking/corroding very quickly most Samsung appliances are junk. their under two separate lawsuits on their fridges for their compressors going out within a year, or their dispensers breaking within a year.
@JamesFixIt
Жыл бұрын
Yes, I’ve been reading about fabric softeners and I’m sure that is one of the main culprits!
@DorisTucker-b9y
4 ай бұрын
Thanks so much , I am turning 65 female. You are good I understanding everything you said. I feel I can do it myself. Thanks so much. ❤
@JamesFixIt
4 ай бұрын
You can do it! I would recommend a second hand for the heavy lifting, but totally possible to DIY with moderate tools and knowhow :)
@jonphanspromotions
5 ай бұрын
Good job man. How much did you end up buying the parts? Mine did not turn on so I bought a new one.
@GK-qc5ry
11 ай бұрын
I think my spider arm is gone but this seems a little too advanced for me, maybe time for a new machine. Samsung isn't very impressive when it comes to their washing machines. I'm going to try another brand next time.
@Thissandthat
2 жыл бұрын
Great video! Also… I spy some fabric softener on the shelf. Fabric softener as well as not leaving the washer door open to dry out is a recipe for broken spider arm due to corrosion 😢
@JamesFixIt
2 жыл бұрын
I am always on my family about leaving the door open, but did not know about the fabric softer. Going to go give my wife an earful about that now 😅. Thank you!
@jessesan2003
Жыл бұрын
Downy Fabric Softener is like cholesterol for your washer hoses. It also ruins the plastic parts of your machine.
@jessesan2003
Жыл бұрын
Also closed door leaves mold that ruins door seal and leaks later.
@johndoe-vc1we
Жыл бұрын
@@JamesFixIt How old was the machine and how regularly did you do a maintenance wash? Didn't find the machine too dirty so surprised the spider was corroded.
@JamesFixIt
Жыл бұрын
@@johndoe-vc1we This washing machine is a good 13 years old! I started doing maintenance washes after about 5 years of owning it, and now do them monthly.
@richardj8853
Жыл бұрын
Are you trained In working on such appliances or is this the first time you did something like this ? I probably have the same issue with my washer but I m dead scared to dismantle it as I have never worked on such appliances . Any valuable tips for me ?
@JamesFixIt
Жыл бұрын
Not a trained person on this, just generally handy. Should be good for the average person following this video. Lmk if you have any specific questions!
@CurtisC-e5c
6 ай бұрын
Thanks for a great video. I fix things for people and save items being tossed out and buying new. I need to go this and your video will help big time.
@JamesFixIt
6 ай бұрын
👍🏽 Awesome! It’s crazy to think about how many of these get thrown out over just a single issue like this.
@eddiepearce5307
4 ай бұрын
Great video looks bit complicated but very good video Mine is not that bad YET probably headed there
@JamesFixIt
4 ай бұрын
Thanks 👍 Yes, a lot of little steps, but much better than shelling out $$$ for a new unit.
@Reelingline
7 ай бұрын
If your reading this remeber to put the washer and gasket on the new spider arm. I have to take mine appart to do this...
@JamesFixIt
7 ай бұрын
Great point, and hope this helps someone! Hope the reassembly was not too bad.
@adamnugent2137
3 ай бұрын
I was told that the spider arm is made of galvanized metal, which gets corroded from the humidity and wetness
@jrichardson5822
Жыл бұрын
I have a new machine bought from a outlet center. I will try this another video said shipping bolts
@JamesFixIt
Жыл бұрын
Yes, if it is brand new, that should be shipping bolts as the issue. If not, I’d contact the seller for a replacement 👍🏽
@victorcorleto8483
2 жыл бұрын
Do you think this parts that you changed can be compatible with a Samsung wf45h6300ag/a2 thank you if you respond
@JamesFixIt
2 жыл бұрын
Hello, while some parts might be the same, it looks like the Spider Arm is a different part...
@robertlundquist3321
8 ай бұрын
what is code JO 12? samsung has no answers. is it a code for broken spider arm?
@V4U9HN
2 жыл бұрын
so mine completely stopped spinning and now it can’t move at all by hand… hopefully it’s the spider arm. my filter also has been building up with zinc small rocks so we will see
@JamesFixIt
2 жыл бұрын
Small rocks is definitely a sign of a broken spider. I did see a few in the catch drain as well. Hope a new spider arm will fix your issue!
@sherrywinn7825
Жыл бұрын
Amazing video very detail oriented but I would like to know where you got the kit. I also have the same set and color.Ive had mine 11 years doing same thing as ur ty so much for all ur help and video
@JamesFixIt
Жыл бұрын
You can find it here: amzn.to/3B77x8I
@jerryhubbard4461
2 жыл бұрын
Very good video. I have a brand new 7.6.2022 one month old Maytag front loader that is shaking its self apart. Under warrantee the company is sending a repair person to check it out.
@JamesFixIt
2 жыл бұрын
Thank you and glad it is getting repaired under warranty!
@wacho5338
6 ай бұрын
Thanks brother, it was very helpful. And the links helped too.
@JamesFixIt
6 ай бұрын
Glad it helped and you’re welcome!
@lin018
Жыл бұрын
I replaced the bearing 3 times already. Ready to dump the washer. Poor design 😢
@JamesFixIt
Жыл бұрын
That’s a bummer! Was water getting into the bearings, causing them to rust, or was there a different issue?
@caseymuni4097
9 ай бұрын
There is a simple solution to avoid having this problem in the first place: leave the door open between washing. The water stays inside the washer and moisture corrodes bearings and metal spider. Or attach a string to keep the door slightly open.
@JamesFixIt
9 ай бұрын
I've trained my family to always leave the door open after each wash. After 10+ years, it still corroded, unfortunately, but I'm sure that lifespan would have been much shorter without leaving the door open between washes. 👌
@markhickey4979
7 ай бұрын
We also always leave the door open, but mine was also very corroded with one arm cracked clear through.
@JamesFixIt
7 ай бұрын
@@markhickey4979 It's an unfortunate quality/design issue :/ Have you fixed the broken part, or replacing the entire washer unit?
@markhickey4979
7 ай бұрын
@@JamesFixIt Thanks to your video, I was able to fix it. Machine runs like a top now. Mine was a slightly different model, but I could figure out my way around the minor differences. I was a bit surprised at the crap metal used for the arm and the screws holding it in. They are white metal and snap off so easily. THANK YOU again for this video. After a really bad experience with an appliance repair guy / bandit, I much prefer to do my own work. Given how long it took to tear this down and put it back together, I am guessing I saved at least $300 on labor.
@JamesFixIt
7 ай бұрын
That is awesome to hear, and you definitely saved $300 at least! It's great to know that you've also done the work without skipping corners as some "handy men" out there might do to make a quick buck! Thanks!@@markhickey4979
@petrovanheerden834
8 ай бұрын
My samsung machine do not have any buttons on the side cant find my delay button
@et9514
Жыл бұрын
My samsung front load washer is brand new and has this rocking issue. I balanced and still couldn't fix it. Any ideas on how to fix it?
@JamesFixIt
Жыл бұрын
Did you remove the shipping bolts from the back of the washer? There should be four of them.
@et9514
Жыл бұрын
@James Fix It! lol thank you. First washer and dryer I've ever had.
@colinsace1
Жыл бұрын
My 11 year old Miele started getting very loud and wouldn’t stop shaking a little more violently than this one especially at 1400rpm was SO LOUD! and walking never done before about a month prior my spider arm was corroded and my drum was knocking and Miele wrote it off even though it could of been fixed.wasn’t happy as it was stainless steel and chrome door I loved the look of it more than anything else lol. But went back to the first machine I bought myself when I moved out at 18 years old and that’s a lg I am now 39 on my 2nd lg and it’s so much better than the Miele I think personally cleaner clothes an so so quiet… 🤫😊 even before my spider went on my Miele it was never the quietest machine and I live in apartment so couldn’t use it at night the whole block would hear it 🤣🙈 Samsung are good to I think but never owned one, but love their tvs 💯
@DANNYDOORMAN28
10 ай бұрын
I couldn’t take the spider arm apart. I gave up 😢
@kappzztv6120
Жыл бұрын
Did you put silicone on your rear tub seal? One video says to do this and others don’t mention it at all
@JamesFixIt
Жыл бұрын
The rear tub seal actually had silicone pre applied when I purchased it, and I haven’t had any issues. I’d recommend adding it in 👍🏽
@markhickey4979
7 ай бұрын
A couple of notes from my experience doing this... 1. take lots of pictures during the teardown... it helped a lot when putting things back together. 2. James is right about getting the top on and off of the springs. I did it, but it is not necessarily easy, and I am relatively strong. 3. On my model, WF42H5200AW/A2, there was a trick to getting the control panel off. you had to undo the screws holding the soap tray in and slide it back. 4. My impact wrench did not budge the " difficult" bolt. I took half of the tub off, grabbed the metal basket between my legs and used a long rachet handle. 5. In my case, the shock absorbers were difficult to get out of their brackets. If you pull/twist while wiggling them, they will eventually come out. I had to twist and wiggle them while pushing to get them back in as well. 5. It will be a miracle if your machine needs this repair and you do not snap the heals off of a couple of the screws holding the spider arm in. They are made of sh*t metal 6. if you are going to replace the bearing on the inside of the tub, be aware that the plastic seal that covers seems to actually be a metal disk coated with plastic. It is (or was in my case) *very hard* to pry out, and since there is a metal ring inside, if you are pushing down on one side to pry up the opposite, you are very likely (as I did) to bend the metal disk. Given how tight it is seated, I am not sure how you would get it out without bending it. You could just assume you will replace it of you are replacing the bearing (the seal disk is pretty cheap, I think), or do what I did (under time pressure - no time to order a new seal), and use a small hammer and rachet extension or piece of wood to bang it back into shape on a flat surface. 7. Also about that disk. When it finally popped out, a small spring also popped out. It took me a little while to figure out that it goes in a groove around the edge of the flexible part of the seal toe hold the rubber against the shaft of the spider arm. 8. Wear mechanic's gloves. l cut my hands to pieces.
@CJ-vg4tg
11 ай бұрын
Great video thanks. I need to dismantle mine (Kenwood) as it makes a horrible noise, could be the bearings or spider or both! Been putting it off for ages as I cannot find the right bearing code/size. I'll need to disantle it first to see what bearings it has which is a pain as we'll have no machine for a week or so. Not a cheap model - washer and dryer 10kg. If it was a cheap model I'd just buy a new one.
@Tbrymer08
2 жыл бұрын
When I spin my tub in a certain spot when spinning it is tough to spin . Would it still be the spider arm?
@JamesFixIt
2 жыл бұрын
Definitely could be. Does it wobble while spinning it by hand? It could be binding up on the one side that is drooping.
@gsr187t
Жыл бұрын
Or just buy a new one, no more front loaders for me. 🤷♂️
@JamesFixIt
Жыл бұрын
Hehe a much easier option, just not so much for the wallet. This front load washer has been treating my family and I very well. Other than this issue, it feels like it's lasted forever, and the new spider arm has been perfect since this install.
@timault8209
2 жыл бұрын
Thanks for making this video. Here's my issue... My 2014 WF42H5600AW washer makes noise ONLY during spin cycle, and it can be broken into two distinct sounds: (1) a knocking during initial spin up followed by (2) a loud vibration-type racket during max RPM. Furthermore, knocking occurs at the start of the spin cycle during low RPM as the washer seeks to balance the load; the washer then stops, begins again, stops, restarts, et cetera, some random number of times until it begins to spin in earnest and the loud vibration-type racket occurs. All of this-apparently-are symptoms of a broken spider. A knocking noise during the spin cycle can also be caused by three items: - worn shocks; - loose counterweights; and... - broken drum shaft assembly (aka, "spider"). I hate to fire the parts cannon at a problem. Is there a assured test to absolutely confirm the spider is the source of the knocking during the spin cycle?
@JamesFixIt
2 жыл бұрын
Yes you can! So, with the washer off, spin the drum by hand. If the drum has a wobble to it, you know for sure it's not the shocks, weights, or balance ring, and a broken spider arm is the culprit.
@felixlin2846
Жыл бұрын
@@JamesFixIt I have the same problem with my 5-year-old Samsung front load washer, the washer is shaky when the drum spin, but I can't be sure if it's a bearing problem or a hydraulic leg problem, or a spider-arm problem. But seeing your discussion, I think it should be a spider-arm issue. BTW, Thank you for the great video.
@johnbroussard9480
Жыл бұрын
My 2009 wf209anw/xaa wash tub has movement back and forth along the axis of rotation, but no wobble when the machine is off. While running it will wobble and cut off. I'm hoping the problem is either the balance springs or shocks. The spider arm repair is more time and money than I am willing to spend. Is this just wishful thinking? You're repair video is excellent. Well done.
@JamesFixIt
Жыл бұрын
If there is no wobble when turning the drum with the unit off, it does sound like your spider arm is straight. Hopefully it's a different issue of shocks, leveling feet, etc. Were you able to find the source?
@johnbroussard9480
Жыл бұрын
Yes. I replaced all 4 shocks. The 2009 washer works much better, although I avoid the high speed spin setting. The air shocks are unbelievably flimsy, old and new.
@johnbroussard9480
Жыл бұрын
So it was about a $60 repair and several hours playing with it, although I'm retired. Saved hundreds on a newer washer. Thanks again.
@gregie9999hotair1
2 жыл бұрын
Did you coat the spider with some kind of protective coating? We did ours around 2010, so we are probably on borrowed time with this replacement spider. It's starting to shake bad again occasionally setting a shaking code. So we probably do spider, bearings , and seal plus shocks and both front and rear balancers. But, before I can buy parts I will diagnose unit just to see how far gone it is. I want to coat the new spider and see if I can eliminate this problem of spider deforming.
@JamesFixIt
2 жыл бұрын
I did not, but I definitely wish I did! Please let me know what type of coating you end up going with!
@jessesan2003
Жыл бұрын
Do the damper shocks first,all four $32 bucks amazon. Also dont overload the washer, asking for major problems like this video.
@hybridangel3403
Жыл бұрын
My old machine did that I eneded up getting rid but the new one is doing something similar except not moving
@JamesFixIt
Жыл бұрын
Is the replacement machine brand new? They come from the factory with four shipping bolts on the back of the unit that you need to remove. If those are already removed, maybe it’s defective?
@hybridangel3403
Жыл бұрын
@James Fix It! yes I took all 4 out. The level is ever so slightly more to the right but I wouldn't have thought that would make all that difference I haven't touched adjustable levelling feet I might try that. It's a Haier series 5. I had broughtba Samsung 5+ autodose. But the programmes were much longer on the cotton programmes than it said so I sent it back. It's a lively sleek washer.. but not for me. You would think the Samsung would be as customisable with washers as the Haier. But it's not. Thanks for replying though.
@larrydew6960
Жыл бұрын
I'd take pictures of the electrical connections for reference. Great job.
@JamesFixIt
Жыл бұрын
Great idea!!!
@ericastanton2010
11 ай бұрын
What to do to prevent the same thing happening again and have to change in 5 years? How to prevent galvanic corrosion? how about plastidip or placing a plastic washer to prevent contact of the two dissimilar metals?
@MrRacheltensions
Жыл бұрын
Great tutorial. My washer shakes violently, and there are no error codes. During the cleaning cycle, I noticed plastic pieces in the drum. Could the plastic housing be breaking off as well? I am going to follow this tutorial, at this point, nowhere else to go but up! Thanks for sharing!
@JamesFixIt
Жыл бұрын
Hmm not sure how plastic pieces could show up inside the drum like that. At least it isn’t coming from the outer plastic shell. I was finding tiny bits of metal in the bottom catch filter (from the broken spider arm), but nothing inside the drum. What color are the plastic pieces?
@MrRacheltensions
Жыл бұрын
@James Fix It! Thanks, James - they appear to be part of the plastic mounting frame that holds the rubber seal. Everything else checks out fine as you described. The holding drum rotates fine both ways, looking in through the back, the springs, and 4 shocks appear new and undamaged or worn. Should I check the machines balance with a level and perhaps adjust the pads if necessary? Then recalibrate?
@markhickey4979
7 ай бұрын
I was finding bits of plastic in the filter that I think were being scraped off of the inside of the plastic tub by the unbalanced basket.
@limamantapachitas
6 ай бұрын
How much you spent in parts?
@Olayinkahakeemishola
2 жыл бұрын
Thanks and remain blessed.
@JamesFixIt
2 жыл бұрын
Thank you and likewise!
@joejohnson2478
Жыл бұрын
Stay away from Samsung washing machines. Worst brand that you can buy.
@JamesFixIt
Жыл бұрын
We’ve had this unit since 2009, and it’s been great other than this one issue. Hoping the new spider arm lasts for a while, but it’s been fine otherwise 👍🏽
@joejohnson2478
Жыл бұрын
@@JamesFixIt I had one of their top load machines which was dubbed the exploding washing machine as it would literally come apart during the spin cycle. Check out exploding washing machines on KZitem for a number of those videos. Although mine never came apart it had to be serviced 7 times within a 3 year period. Sears extended warranty was terrific. If they had to service the same appliance 4 times within a year. They give you a full refund on the appliance. You had to make that purchase at Sears though. Samsung was denying any problems with their Washers but sent their customers who owned one of these machines a magnetic decal with instructions to affix this over the machines selector dial. It basically blacked out everything except the gentle cycle which is the only selection they wanted you to use. I already got my new washer through Sears when Samsung agreed to reimburse their customers who had purchased these units.
@erico8738
10 ай бұрын
Just had the spider flange replaced on ours. And it is a 2009 model as well. It is acting like it is brand new again.
@joejohnson2478
10 ай бұрын
@erico8738 Luckily, when I purchased mine at Sears, I took out their extended warranty. They offered one of the best extended warranties ever. Their extended warranty: If they had to service an appliance 4 times within the year, any issue, they would reimburse you the full amount that you paid for that appliance, provided you bought any replacement brand at Sears. My first year, just a month or 2 past the original Samsung warranty, I called Sears to fix different 3 times. With that, I gladly renewed the Sears extended warranty for another year in which the machine required 4 service calls. Sears issued me a check for 800 dollars. I then bought an LG front load and have had no problems during the 8 yrs of ownership so far.
@joejohnson2478
10 ай бұрын
@erico8738 BTW. The repairs were as follows: 1. Despite the lid locking. The sensor telling the machine the lid was in fact locked failed so the machine wouldn't start. 2. The water level sensor failed so the entire machine filled with water, every time during the cycle. 3. The motor failed 4. Motor failed again 5. Clutch or transmission to the motor needed replacing. 6. One of the corner springs or shocks that stabilize the drum during its spin cycle snapped 7. Water inlet and temperature sensor replaced. The machine would not provide any hot water when set to do so. 8. Another motor issue as per the diagnostic code displayed and Sears, at this point, just issued me an 800 credit with their appliance department section at Sears. On 3 of those issues, clutch and motor failures. The entire machine had to be dismantled. I remember coming downstairs into the basement seeing the unit in various parts with its drum on its side. It looked like the Lost Is Space Robot dismantled. Lol
@luchabinatang1632
Жыл бұрын
how long it's been used , and repaired it
@JamesFixIt
Жыл бұрын
So I have a family of five and this washing machine is used about every other day (sometimes daily). It’s been completely perfect, and literally works like a brand new unit! 👌🏽👌🏽👌🏽
@StudioRV8
7 ай бұрын
Were you able to repair this from the front and top, or did you have to pull out the washer to get access to the back?
@moni-q
Жыл бұрын
Thank you for taking so much time to explain exactly how you did this. I will definitely give this a try to save my machine.
@JamesFixIt
Жыл бұрын
Thank you and welcome! Highly recommended as mine is still working in tip top shape. It’s like a new washing machine!
@moni-q
Жыл бұрын
@@JamesFixIt my machine is running like new now. I am soooo happy
@aletroncone
Жыл бұрын
Finally someone teach how to fix trully, thanks
@JamesFixIt
Жыл бұрын
Thank you and hope it was helpful!
@thabisomodise2529
9 ай бұрын
Hi, do you perhaps have a DC92-00658C PC board?
@thehobbymechanic47
2 жыл бұрын
Great instructions! I followed to a T and everything went 👍
@JamesFixIt
2 жыл бұрын
Awesome, happy to hear!
@loktom4068
Жыл бұрын
Never buy appliances with unique color other than white.
@JamesFixIt
Жыл бұрын
Oh? These custom blue appliances have been used vigorously non-stop since 2009, and working great 👍🏽
@loktom4068
Жыл бұрын
I'm glad you liked them. Otherwise it's hard to match the other ones when only one needs replacement.
@ReaperKeeper307
Жыл бұрын
Thank you for this vid and the links! Super helpful 😎
@JamesFixIt
Жыл бұрын
Glad it was helpful!
@mathiasgonthier5436
2 жыл бұрын
Mine has a wable and a rubbing noise. .1/4" offset on one quarter of the ring. So it's rubbing and stops it from going to full spin. Replaced shocks. got better but not fixed. .how do you know if it's balance ring vs bearing and spider ring? Also a 15 year old scenario so sounds the same but worst worp and rub.
@remarkdelacruz7076
10 ай бұрын
What was the size of your bearings and drums seal, thank you 😇
@HandyTim
Жыл бұрын
Great video fyi fabric softener destroys washing machines
@johndoe-vc1we
Жыл бұрын
I've seen this happen to machines that never saw any. They also hadn't had a maintenance wash in a long time
@JamesFixIt
Жыл бұрын
Thanks for the tip! I haven't heard this before till recently.
@keithgerena
Жыл бұрын
How long did it take to do the complete job?
@JamesFixIt
Жыл бұрын
Took about 2-3 hours, but I was working solo. With a second person, it would be closer to 1-1.5 hours 👌🏽
@twygee
Жыл бұрын
I'm curious to know how long this took you?
@JamesFixIt
Жыл бұрын
It took a couple of hours for sure, as I did everything solo. A second person to assist with the heavy lifting would definitely make things easier and speed things up!
@robertvillafane3753
9 ай бұрын
Thanks for this video, best video ever
@JamesFixIt
8 ай бұрын
Thank you!!🙏🏽
@jiaqint961
2 жыл бұрын
Exactly my problem, thanks so much for the video.
@JamesFixIt
Жыл бұрын
Hope you got it all fixed and you’re welcome!
@pauls.4529
Жыл бұрын
How'd you get the broken bolts out?
@JamesFixIt
Жыл бұрын
So the kit I bought came with new bolts, as it’s common for the old bolts to break off on the old spider arm when using a wrench. If you still need to remove the broken bolts out, you can try a broken bolt extractor.
@arthurgabriel3504
Жыл бұрын
Nice job explaining the process
@JamesFixIt
Жыл бұрын
Thank you! 🙏🏽
@MsZeeMsZee
Жыл бұрын
Great tutorial! Thanks for sharing.
@JamesFixIt
Жыл бұрын
You are so welcome!
@ericjulian5610
Жыл бұрын
Great video thank you. Mine has the same problem like yours
@mlpgs
6 ай бұрын
Thanks for the video!
@JamesFixIt
6 ай бұрын
You're welcome!
@amalik6303
Жыл бұрын
How to remove the belt and more
@JamesFixIt
Жыл бұрын
Actually, on this model, there is no belt.
@kanagarajkanagaraj6775
Жыл бұрын
Thanks for the video!
@JamesFixIt
Жыл бұрын
You're welcome!
@tcda6ix361
Жыл бұрын
Nice video,thanks
@JamesFixIt
Жыл бұрын
Thank you! Hope it was helpful!
@ahshan1234
Жыл бұрын
U have a link to order the spider arm?
@issacasimov
Жыл бұрын
How much force did you need to tap those bearings out ? I wonder if there are tools to do it.
@JamesFixIt
Жыл бұрын
Not a lot at all, but it was a tedious process for sure doing it incrementally on all sides. I’m sure there is a specific bearing tool available somewhere.
@achrafzaidi3038
Жыл бұрын
I wish I have seen this before i got someone to fix it for me
@rosyolgiun8547
Жыл бұрын
Thanks a lot Sir.
@JamesFixIt
Жыл бұрын
Most welcome 🙏🏽
@brendawronek7984
Жыл бұрын
Great video 👍
@JamesFixIt
Жыл бұрын
Thanks 👍
@mlpgs
6 ай бұрын
Thanks!
@JamesFixIt
6 ай бұрын
Thank you!!!! 🙏🏽
@keng9599
Жыл бұрын
shock is plastic or hydrolic?
@JamesFixIt
Жыл бұрын
The shocks are plastic, no hydraulics, just some thick grease applied to resist movement.
Пікірлер: 233