Bro speaks so clearly makes it very easy to understand
@_xspec
2 жыл бұрын
Bro your videos are very helpful fr. I have a DE and it’s been kicking my ass lol. When I get my g to 100% we gotta do some runs💯
@JLowe
2 жыл бұрын
Glad I can help big dawg! I’m always down to do a couple runs!
@danzar1729
Жыл бұрын
Thank you so much brother. Vdc and slip light and break ligh was on on my g 35, 2006 cupe , it was low on brake fluid as you said, I add brake fluid now problem is fixed. thanks to you, I subscribe to your Channel.
@JLowe
Жыл бұрын
Glad I can help!
@juliochingaling5824
11 ай бұрын
Thank you brother for your knowledge. God bless.
@markmcmanaman1282
3 ай бұрын
Excellent video, thanks for sharing and I hope you have a great day!
@JLowe
3 ай бұрын
Hey, I appreciate it! I hope your day was great as well!
@ysal4708
Жыл бұрын
Great video! Thank you so much!!!
@jeffrunyan2691
Жыл бұрын
I have a few 03-4 M45s. Can u use that trick to kill the power on those also? Also having a hard time finding a posi unit for this platform.
@skan1crucial370
Жыл бұрын
My boii good looking out I forgot I was low on brake fluid I believe that’s the problem my light is on 😂🤙🏽🤙🏽 good man
@x2iu386
10 ай бұрын
which light was on?
@stevendouglas3359
2 жыл бұрын
That's a good sharp guy. A+
@keaveny63021
Жыл бұрын
Great video!
@michaelrod482
Жыл бұрын
I owned 4 G coupes 05 rev up manual 2011 G37 IPL auto 2005 G35 auto Now a 2004 G35 auto All of them I've had to do this except the IPL I currently just changed ignition coil 6 and now I'm getting a slip and VDC light right after I changed the coil. And it's Givin me trouble starting...so I know these vq engines so well I know its going to be a camshaft sensor because I changed the crank shaft sensor recently which gave me the same issues if not vdc fuses maybe. And I'm dealing with code p1757
@travies3013
Ай бұрын
I saw another video where a guy used red and white with a headphone Jack based. It was like a cord, but I was wondering what people use the yellow for
@travies3013
Ай бұрын
Do you know what the red white and yellows for I know that's how you plug in like a old school super nintendo or nintendo sixty four, but does it use the car's screen or where is the video signal going to
@oktavianusbenhur7234
2 жыл бұрын
Thanks for sharing my friend. Watching from Indonesia and +1 new subscriber.
@JLowe
2 жыл бұрын
Appreciate the love! ✌🏽
@gradytimmons6961
Жыл бұрын
Awesome bro
@ericramirez-navarro9674
Жыл бұрын
Is this the same on an automatic ?
@ominousnefarious5919
Жыл бұрын
Thanks man!
@Pilot97
2 жыл бұрын
Very handy bro
@travies3013
Ай бұрын
Thank you bro
@BryanRacks
8 ай бұрын
Bro so I bought my g a few months ago and I had the lights on but shir was the can shaft sensor replaced it and also ended up replacing the fuel pump cause it was going out. Car runs fine now but at random ass times they lights turn on idk if it’s just a dummy light or not
@JLowe
8 ай бұрын
Did you use OEM sensors?
@boogieman2592
Жыл бұрын
Do you think that if something going on with my fuse box can make that turn on bc my 04 g35 started losing power for a quick sec the same way u said on the freeway and I made it off to a small street and now my car doesn't even turn on 😮💨
@jphillips171557
2 ай бұрын
Same thing happened to me on my 05 g35
@Catturd555
Күн бұрын
She started calling me at 4 this morning saying she was coming here bringing breakfast but never showed
@cooky1875
8 ай бұрын
Yes bro! I have 350gt skyline and my two 12 inch subs are on the back seat too! 👌👌🤣
@JLowe
7 ай бұрын
No way!
@cooky1875
7 ай бұрын
@@JLowe it’s so loud! 😂
@smorillo8581
Жыл бұрын
cam shaft port sensor 1
@fishranks5886
5 ай бұрын
Got slip and TCS off lights on. Engine light is on so I got the codes read and it came back with a faulty knock sensor, about to replace it but wondering if it could be anything else. Car doesn't go into limp mode and sounds and starts like it should. Car was left sitting for 4 years without being driven much and previous owner had to replace seized battery and starter
@JLowe
5 ай бұрын
What was the code if you don’t mind me asking? Have you topped off all the fluids?
@fishranks5886
5 ай бұрын
@@JLowe I topped off the steering fluid then reset the ecu and none of the lights came back on, usually they turn on after the car being driven a tiny bit but this time they didn't. I might not have driven it long enough or maybe all it needed was fluids topped off. Code is p0327.
@fishranks5886
5 ай бұрын
Nevermind, lights came back on after starting it today. I've taken it to an auto electrician and they read the codes and it only came back with the knock sensor harness
@cybernetic953
Жыл бұрын
I have an 04 g35 coup. My problem is when i start the car no light comes on but when I step on the break to put it in drive the shifter won't shift an all the vdc slip an abs light comes on. I replace the break switch an still nothing. Any help would be appreciated
@pjc8056
Жыл бұрын
Have you found a solution? I have the same exact problem
@joedurtey2210
Жыл бұрын
Try the neutral safety switch
@user-nr4yg7uc4y
2 жыл бұрын
Ас саламу алейкум всем! На табло постоянно горит vdc slip, много причин оказывается есть, с трудом находил всякие возможности исправить ошибку, как долить масло в гидрач или тормозную жидкость, за этим всем стараюсь следить,, в самом деле оказалось то, что полгода назад красил задний бампер, купил новые датчики парковки, соответственно их тоже красил,, в дождливую погоду поначалу беспрерывно пикало в салоне пока не выключишь кнопку парктроника, до сегодняшнего дня уже больше недели как не мыл машину,,помыл на мойке,,в итоге ошибка перестала появляться на табло... Отсюда итог-из-за повреждения датчиков парковки - это тоже может быть, так как я после покраски повредил датчик. Удачи всем и терпения!
@DavidMartinez-gl2bn
2 жыл бұрын
Bro I’ve taught myself so much trying to fix this issue bro, And I still have it
@JLowe
2 жыл бұрын
You and me both! I can almost disassemble the whole car
@jordangiovinazvo5058
2 жыл бұрын
Have you found it yet
@jjproductions6912
2 жыл бұрын
I have the vdc and slip light on and also my RPM gauge doesn’t work. Any suggestions?
@JLowe
Жыл бұрын
Check for continuity for all the wires that play into the rpm gauge. That sounds like something electronic.
@dabbingjacoby7267
Жыл бұрын
Me and bro wearing the same sweater rn lmao
@JiggaOfficial
2 жыл бұрын
What does the slip light actually mean ?
@JLowe
2 жыл бұрын
It can mean multiple things usually anything with a de vq in it, it’s a camshaft sensor
@JiggaOfficial
2 жыл бұрын
@@JLowe yeah I see that on mine
@laquanlockhart3615
2 жыл бұрын
How many cam shaft senors do my 2007 g35x awd have
@JLowe
2 жыл бұрын
@@laquanlockhart3615 I think you have an hr engine so that would be 4 of them
@OM4Rx
11 ай бұрын
12 powers cuh 😂
@cryptid726
2 жыл бұрын
thank you! that slip light is pissin me off.
@JLowe
2 жыл бұрын
Did you get it fixed?
@josegarden6534
Жыл бұрын
I was literally driving and they went away by it’s self
@josequavo1052
Жыл бұрын
So if I disconnect it I can burn out
@JLowe
Жыл бұрын
In theory. 😂
@kingdre3061
Жыл бұрын
Yeah but if your driving fast and press your breaks u can slide
@Playerz714
Жыл бұрын
Fk my coupe just got the Slip VDC Off Light and check engine soon light
@jvr6809
Жыл бұрын
Is this code p0226?
@JLowe
Жыл бұрын
It’s either P1084, P0345, P0340, P1078
@toxichazard6442
2 жыл бұрын
Selling my shi soon 😪
@JLowe
2 жыл бұрын
Why brother?
@toxichazard6442
2 жыл бұрын
@@JLowe not willing to fix gotta spend like $2k I got 161k miles gonna finance a Q50
@JLowe
2 жыл бұрын
@@toxichazard6442 that’s not a bad move. What’s wrong with it?
@toxichazard6442
2 жыл бұрын
@@JLowe crushed subframe window motors out A/C compressors out I had the Vdc break light problem to it just went away by its self
@JLowe
2 жыл бұрын
@@toxichazard6442 window motor is that bad to replace. The A/C is a little more difficult but still not super challenging. I’d try to fix those and sell it yourself versus selling it to a dealership, you’ll get more for it.
Пікірлер: 71