I'm gonna give this a try! Thank you!!! Very helpful!! Seems like everyone is having this issue with this machine.
@Large_Marge_Sent_Me_
8 ай бұрын
I just got a smaller version of this for Christmas. I started having this problem within a week. Machine dropped stitches and thread. Live how she explains how to do this
@hippiepisces9745
Жыл бұрын
Yea mines making noise and I just got the damn thing like 3 hours ago and still haven’t done anything yet
@LindaE.Koester-be7pk
11 ай бұрын
When you attached the drill..😲🤯 Seriously though, thank you for sharing this! I had put my machine aside several months ago. Now I can fix it.
@michellehaynes8111
2 жыл бұрын
Great idea will try this tomorrow! Mines been so much noise I was about to throw it away! Hopefully this can save it 🤞🏻🤞🏻
@bsantiago945
2 жыл бұрын
Interesting that you figured out that those 2 pieces are suppose to be one piece together. I was a little skeptical 🤨 but when I saw an Addi machine taken apart indeed the ring similar to this one is a whole unit and seems like it is kept together by screws. I will try to fix mine too maybe glue like you or maybe screws. Will see. 😌
@DIANACORDOBAYOGA
2 жыл бұрын
Screws sound really good idea actually it will be much better thanks
@nancyirvine8152
2 жыл бұрын
You are brilliant! Thank you so much.
@DIANACORDOBAYOGA
2 жыл бұрын
Wow thanks for the comment ❤️❤️🤗
@florencecox2022
2 жыл бұрын
GREAT TUTORIAL, JUST GOT THAT MACHINE AT CHRISTMAS. PLEASE NOTE THAT SOMEONE ASKED HOW TO UNRAVEL WASTE YARN USED AT BEGINNING OF SET UP. I TRIED THIS TO DAY ( REF FROM USING A KNITMASTER K/MACHINE) SET UP WITH WASTE YARN AS USUAL. ## AT THIS STAGE USE FINE COTTON , 4 THIN STRANDS ON WHAT I USED TODAY. 3METRES LONG. SET INTO PLACE AS IF YOU WERE JOINING YARN !! KNIT ONE( 1) ROW. NOW TIE A PIECE OF COLOUR WOOL ON END OF YOUR LAST PIECE USED. WHEN YOU PICK UP YOUR Ist STITCHES AND BEFORE YOU PULL IT INTO POSITION ??? PULL THE MARKED YARN OUT OF THE PROJECT. ?? NB--MAKE SURE YOU DON'T CATCH ANY OF THIS SINGLE THREAD WHEN YOU ARE PICKING UP STITCHES ?? SEE HOW YE GO?? HOPE THIS HELPS
@crispykalechips
2 жыл бұрын
Great video!! I'll have to try this with my machine, it tugs and clicks when I try to use acrylic yarn like red heart super saver. Its been sitting on my shelf because i get so frustrated with it, hopefully this fixes my problem!
@DIANACORDOBAYOGA
2 жыл бұрын
I have the same problem with some yarn it depends how thick the yarn is I also recommend using static guard but if the machine have so much travel working with certain yarn I will said don’t use it
@mtblondie0036
2 жыл бұрын
Yes my machine is very picky in yarn it don't care for anything #5 it will work it just gives me issues at certain parts of the yarn but it completely loves #4 sorry not sure of brands I do know it hates tht "I love this yarn" brand
@gtbanga1479
2 жыл бұрын
Red heart low quality in my opinion try Caron one pound… my sentro does fine. Take it apart and clean it dust it then lube it. Food grade silicone based lube
@DIANACORDOBAYOGA
2 жыл бұрын
@@gtbanga1479 i will try Caron too, thanks for the advice
@DelgadoMaritza
2 ай бұрын
Pense que tenia que comprar un Sentro nuevo pero con su video creo que puedo arreglarlo. Gracias!!! 😊
@SarahClaus78
2 жыл бұрын
This is so amazingly helpful! Thank you so much!
@DIANACORDOBAYOGA
2 жыл бұрын
Thank you, I’m glad this helps
@wileycovington4497
3 ай бұрын
Yay!! No dropped stitches, but my counter is noisy. I had to tighten my crank as well. It was a bit loose and was missing catching the gear tread.
@elizabethlolo96
Жыл бұрын
you just saved my christmas presents
@richardlo1330
Жыл бұрын
thank you for this video! i can hear that the machine is operating more quietly, does it feel better when you crank manually? it looks like your fabric after this operation looks much tighter with the knitting... bueno!!
@pamigramstervilleyarnsyarn254
2 жыл бұрын
Thank you it was an easy fix .................
@DIANACORDOBAYOGA
2 жыл бұрын
I’m glad this works for you, thanks for watching 🤗
@raquelreyes8573
10 ай бұрын
Hola solo quiero saber donde puedo compar el attachment para el drill e escribe ante pero no me a contestado por favor si tiene tiempo deje saber gracias por este video voy a tratar lo que usted iso en el video
@epheniateffo2812
5 ай бұрын
Thank you very much. How do I take out my lever tension which is broken. Should I also open my machine
@millievelazquez494
2 жыл бұрын
Muchas gracias por compartir, esperando el video en español
@DIANACORDOBAYOGA
2 жыл бұрын
Awww gracias por ver el video, lo prepárate en español entonces 😁
@millievelazquez494
2 жыл бұрын
Gracias mil👏🏼👏🏼👏🏼👏🏼👏🏼agradecida☺️
@bsantiago945
2 жыл бұрын
Esas dos piezas color rosa se supone que sean una sola. De alguna manera se rompió lo que las unías, aparentemente un pedacito de plástico como se nota en los circulitos blancos que ella señala. Ella utilizo pega para juntarlas de nuevo y así la pieza se mueve como una sola y no deja caer las puntadas, no se queda estancada. Para asegúrame de que así debe ser la pieza me fijé en la pieza de la máquina Addi la cual es roja y si se supone que sea una sola pieza y no estén separadas o rota como se muestra en el vídeo. Espero esta explicación le ayude 😊
@DIANACORDOBAYOGA
2 жыл бұрын
@@bsantiago945 muchas gracias así es 😁
@scottydog6539
Жыл бұрын
Wow, you are good.
@DIANACORDOBAYOGA
Жыл бұрын
Thank you, I’m glad you like it
@linato1855
2 жыл бұрын
I’m just starting out with a knitting machine and finding it very frustrating. Lost track how many times I’ve undone the work the past three days. I just decided to count the worked rows and surprisingly, the counter is way off. Looking at the end piece going around to the white hook, I counted fifty rounds, the counter showed 31! Now I’m counting the times it goes around and the work seems to resemble what it’s supposed look like. I’m also hearing a lot of noise and already tempted to return it after only a few days. Can the counters be fixed/adjusted or did I receive a lemon? The first machine received wasn’t even the brand I ordered. Any suggestions? Thanks
@DIANACORDOBAYOGA
2 жыл бұрын
Yes unfortunately the counter of the machines doesn’t works well, it’s better if you install a digital counter what kind of yarn are you using also try to work at the same speed sometimes if we change de speed the needle start moving and missing the yarn, I don’t think the brand matter mine is also another brand
@monicab28
Жыл бұрын
I still have non idea where you put the glue and why you put it there. I see the places on the machine where the little nubs used to be....some are still there and some aren't.
@ZubairKhan-vs8fe
2 жыл бұрын
Omg Salma Hayek looks just like you
@DIANACORDOBAYOGA
2 жыл бұрын
Hahaha I wish thanks though 😊
@VondaInWonderland
Жыл бұрын
One of my needles is bent and won't knit anymore, it just keeps dropping stitches. I will check that too while I have it open. I hope that it will bend back ❤
@diannacovergirlsmith
2 жыл бұрын
thank you i have a prym and it does the same thing.
@DIANACORDOBAYOGA
2 жыл бұрын
You are welcome 🤗
@raquelreyes8573
Жыл бұрын
Hi Diana where can I buy the attchment for the screw driver to use in the machine I also would like to thank you for sheaing with us newbie I have a addi and a sentro machine will this attachment work on both machine you may think why do i have two machine being a newbies one was a gift the addi express king and the sentro i brought i still have not done anything because of the machine cranking all the time i will try what you did thank you and many blessings
@symoneclarke1372
6 ай бұрын
Is it glue for plastic or super glue?
@florencecox2022
2 жыл бұрын
I SHOULD HAVE SAID WHEN YOU SET UP AS USUAL, KNIT A FEW ROWS. SORRY FOR THAT
@lsealey20
2 жыл бұрын
Thank you!
@DIANACORDOBAYOGA
2 жыл бұрын
Thanks for watching 🥰
@xXxalliexXx
2 жыл бұрын
Do you ever get problems with your handle? Mine has got stuck a few times and keeps getting hot to the touch. There's a sound of little broken bits of plastic inside
@DIANACORDOBAYOGA
2 жыл бұрын
This happened to me in the beginning I did it by hand I put too much pressure on the handle and it began to wear out because I also did it very quickly, also you have to be careful with the type of thread if the machine makes a lot of force it is better to try another type of thread or maybe lubricate the machine
@DIANACORDOBAYOGA
2 жыл бұрын
Here I explained a little bit kzitem.info/news/bejne/qGepk3-loX6Xdqw
@victoriaelizabethfajardoca942
Жыл бұрын
Muy lindoo si puedes hacerlo en castellano o español
@DIANACORDOBAYOGA
Жыл бұрын
Muchas gracias, también está disponible en español Repara tu maquina de tejer | Sentro kzitem.info/news/bejne/mqdn0GWBfaiIjHo
@knittingnana2939
2 жыл бұрын
I would like to know about that adaptor for the screw gun.
@DIANACORDOBAYOGA
2 жыл бұрын
I sell them on Facebook and Etsy Here is the link facebook.com/marketplace/item/667563824387437/
@MeganFerentheil
Жыл бұрын
Sentro does sell replacement parts, if you wanted to replace them.
@lozaloza882
2 жыл бұрын
I have a new machine, I hope save it gears, which the best? machine oil or White grease for cars, and how many time I open it and clean from inside?
@DIANACORDOBAYOGA
2 жыл бұрын
I used super lube silicone oil, it depends of the use I will said one a month just to check how is going I hope this helps
@kolawoleabiola1604
Жыл бұрын
What oil can you recommend for us in Nigeria
@danolson6476
Жыл бұрын
Screwdriver I used. Works: "Phillips Size: #0; Shaft Size: 75 x 3mm / 3 Inch x 0.12 Inch (L*D)"
@claudiaurra7198
2 жыл бұрын
Thank youuuuu !!!! 💜
@DIANACORDOBAYOGA
2 жыл бұрын
You are welcome 🤗 thanks for watching
@scottydog6539
Жыл бұрын
You have to be able to take your machine apart to clean it with a soft cloth or hair dryer to blow the dust out. It is said NOT to use just any type of oil on your machine. Some Oils will eat away at your plastic. If you glue those two rings together, yarn dust will accumulate in between those two rings and you cannot clean them because they were glued together.
@kolawoleabiola1604
Жыл бұрын
Are you now trying to tell us is not advisable to glue it together…what can we then do again
@DIANACORDOBAYOGA
Жыл бұрын
The glue isn’t not that strong after awhile the rings will separate and you can clean it up and glue it back, that’s what I do
@maenynforsyth9414
Жыл бұрын
What is the name of the black attachment on the electric screw gun? Also thanks for the tutorial. I just put the glue on. Will leave it over night.
@amycummins5423
10 ай бұрын
its a drill attachment for the sentra
@jhoandra13_Pt
2 жыл бұрын
Thanks you for vídeo. ❤️❤️❤️❤️
@DIANACORDOBAYOGA
2 жыл бұрын
Thanks for watching ❤️❤️
@ZueCraftyDiva
2 жыл бұрын
Mine started doing those cracking sounds after I used the drill adaptor. Why? I just opened it today and is not working
@DIANACORDOBAYOGA
2 жыл бұрын
Well Pat of the times I work with the drill I think the problem is working with the wrong yarn you can take a look of your machine inside and see what’s going on maybe lubricant will help I use I love this yarn and also velvet like 5mm some yarns doesn’t work at all in my machine
@mimisulimani9929
2 жыл бұрын
Where did you buy the electronic counter?
@DIANACORDOBAYOGA
2 жыл бұрын
On Amazon in the description of this video I have a link where you can find it
@michellegger6175
2 жыл бұрын
I have two Sentro that came out of the box making the grinding noise.
@DIANACORDOBAYOGA
2 жыл бұрын
Sometimes some machines doesn’t like all the yarns try crayon, i love this yarn, or velvet let me know if that works for you
@DIANACORDOBAYOGA
2 жыл бұрын
Try to use medium tension or lose tension
@DIANACORDOBAYOGA
2 жыл бұрын
It also happened with one of my machines the first time I used but now works really well I guess the machine needs time to adjust and you as well to know your machine 😅
@grammy279
Жыл бұрын
Try doing everything in reverse. I did and continue to, and have eliminated that problem.
@carmenfigueroa8429
2 жыл бұрын
No tiene intruciones para reparar en español
@DIANACORDOBAYOGA
2 жыл бұрын
Aun no pero traduciré este pronto 😊
@paulinethomas5248
2 жыл бұрын
@@DIANACORDOBAYOGA 76uhyuuuuuhygyhjhh
@isavicu
3 ай бұрын
la mia hace un clack muy fuerte solo en el punto 42 😳
@Aroobadoota
9 ай бұрын
Ok... who uses oil and who doesn't?
@estherkabati907
Жыл бұрын
Where can get a mouthpiece my machine fall down.am from Kenya africa
@TemitopeLasis
2 ай бұрын
But mine is losing back
@TemitopeLasis
2 ай бұрын
Mine is losing back
@vero169
2 жыл бұрын
que le pasa a tu maquina
@DIANACORDOBAYOGA
2 жыл бұрын
En este video explicó cómo arreglar los aros de la máquina para evitar que no se quede atascada con la lana o aveces pasa que empieza a sonar muy fuerte o la manivela no quiere andar, aquí explicó que hacer para ello, si tienes algún problema con tu máquina avísame
@vero169
2 жыл бұрын
@@DIANACORDOBAYOGA muchas gracias eres muy amable te lo pregunte por que no entiendo el ingles jajajja , yo te aviso si me falla
@DIANACORDOBAYOGA
2 жыл бұрын
@@vero169 con mucho gusto gracias por ver mis videos 🤗🤗
@lucienecavalheiro8267
2 жыл бұрын
@@DIANACORDOBAYOGA minha máquina está estralando na manivela, comprei aqui no Brasil graxa siliconada, e mandei fazer a engrenagem em 3d( impressão), eu uso o adaptador e ela não aceita lã com Tex 500, só 375, vou trocar a engrenagem, pelo que eu entendi, você colou os anéis isso, pq na Addi eles são juntos. Muito obrigado 😀
@TemitopeLasis
2 ай бұрын
Mine is losing bck and not thight
@linato1855
10 ай бұрын
I clicked on this because it says how to fix the machine and disappointed there’s nothing about it. Not the first time taking it apart and first time having issues.
@haroulitasArt
Жыл бұрын
I cant open mine 😭😭😭😭😭
@hippiepisces9745
Жыл бұрын
Yea mines making noise and I just got the damn thing like 3 hours ago and still haven’t done anything yet
Пікірлер: 93