Thanks for this video, I had some cracks I filled with silicone and fog coated over with matching stocco color. This video helped me out a bunch.✌️👍
@partowa
4 жыл бұрын
Thank you so much for your video sharing your knowledge. There are a lot of perople here in New Mexico that have no idea about fog coating stucco.
@henrygee9501
4 жыл бұрын
Great video. This is a very helpful solution to a common problem.
@peterbrockhoff857
2 жыл бұрын
Great video, has an addition and a patio with walls all done with different batches, at different times going to need a lot of fog coat. Thanks for the video!
@mexzcanninja7412
3 жыл бұрын
Looks good! Great video!
@charlie-gx3ny
Жыл бұрын
Nice video thanks for yor help
@ORIGINALCRESTED
8 ай бұрын
Amazing work. I would carry the sprayer bucket bottle on a trash barrel dolly or a hand truck.
@sailshane
5 ай бұрын
Excellent video...thank you!
@599Dan
3 жыл бұрын
Major Improvement, What is the product is that just a simple dye pack that would be used to put into stucco?? Thanks great video
@pandaplastering2466
3 жыл бұрын
its called fog coat
@johnjaso1349
9 ай бұрын
man impressive!!
@PrettyGoodLookin
Ай бұрын
What sprayer do you use in this video ?
@garyfrausto6092
3 жыл бұрын
A better way to do it .is get a sack of Stucco box and base soup it up and run it through a hand Hopper gun with compressor gives it more body looks a lot better!
@hartfordboothe7466
Жыл бұрын
Nicely done.
@jorgecamero9890
7 ай бұрын
Thanks for sharing 👍🎯
@dennisalcordo2789
5 ай бұрын
Nice video. What sprayer are you using?
@antonioguzman5848
4 жыл бұрын
Do you have a video about patching smooth stucco? By the way your smooth stucco video is great!
@sweetnsourlvr
3 жыл бұрын
Good video, I've never heard of this. Looks like the homeowner consistently washed their concrete which caused this in the first place. Why not power wash and repaint? The entire house needs painted anyways. Looks much better though.
@carlostrejo1074
3 жыл бұрын
Tu proseso esta vien pero deverias aver lavado a presión primero y estaria mas perfecto 👍
@DJciefco
3 жыл бұрын
Ese wey si sabe
@scytheplays391
3 жыл бұрын
what make and model sprayer did you use, Than You
@michaelr9510
2 жыл бұрын
Awesome video! Can you pressure wash before to get dirt off?
@rudysalas6
Ай бұрын
You should never use pressure on the side of the house. We like to use a method called softwashing and yes that algae should be taken off before applying anything to cover it instead.
@kenkub2352
3 жыл бұрын
Would it work to mix it thicker and then roll it on? I would think that it would cover any hair line cracks that way. Also, would fogging cover any cracks filled with caulk?
@mexzcanninja7412
3 жыл бұрын
I believe the fog coat is intended for light painting applications in order for better color blending. I would suggest to seal cracks and paint the repaired areas with a similar color before hand. This way when the fog coat is applied its applied evenly to all areas with a gradual blending.
@everyone4694
Жыл бұрын
Does this apply to any stucco finish ?
@everyone4694
Жыл бұрын
Can you apply to santa barabar stucco finsh ?
@marianazareno2207
2 жыл бұрын
Can you fog coat as painted stucco?
@johnarthur9530
2 жыл бұрын
Showa gloves the way to go!!
@vicenteserrano3176
4 жыл бұрын
Can you do a video of how to texture finish stucco
@pandaplastering2466
4 жыл бұрын
Vicente Serrano will do
@leevj9357
4 жыл бұрын
@@pandaplastering2466 yes, please!
@damienthan435
3 жыл бұрын
please name the materials please, all i can tell is just water and some sand (yellow powder). I have an old stucco house, dirty outside but awesome inside. I tried to get rid of the grease bottom and have my house fog coat like your video Best, Damien
@mexzcanninja7412
3 жыл бұрын
He responded to another comment saying the product is called Fog Coat. I would guess it comes in a variety of colors to match your existing home
@1jbegic
3 жыл бұрын
Look up LaHabra Alegra II: www.lahabrastucco.com/literature/LHA2CCDS.pdf
@Marcoe33
2 жыл бұрын
Why diddent you turn around insted of covern your work with the shado
@nestorcebreros7111
2 жыл бұрын
Hi, how do u know the stucco # on the existing to match it?
@pandaplastering2466
2 жыл бұрын
I pick the color similar to it on the chart
@marianazareno2207
2 жыл бұрын
Did you fog coat the whole entire house?
@aidansiperke4601
3 ай бұрын
fog coat me later king
@BearMeat4Dinner
2 жыл бұрын
In SF ?
@pandaplastering2466
2 жыл бұрын
We’re in SoCal
@DavidSanchez-ot3it
2 жыл бұрын
Should have power washed before , all dust did come off man
@g.b.5206
4 жыл бұрын
I think that if you lite power washed first it will be even better
@pandaplastering2466
4 жыл бұрын
I agree. just make sure wall is dry when spraying fog coat.
@rudysalas6
Ай бұрын
Softwash is what you want to do, not power wash you will damage the wall.
@zealthsteel7542
4 жыл бұрын
Why not roll it
@mexzcanninja7412
3 жыл бұрын
Color blending!
@Arthur-hd8uf
Ай бұрын
It looks like s*** Plus you didn't clean the bottom of the wall
Пікірлер: 50