I wouldn't breathe in too much of that magical coral dust, created by dry cutting.
@FitLabb
10 ай бұрын
I’d like to see a video where you show how to use a Dremel to frag Blastos and Acans/Micromussa since I feel like those would be more challenging to do with a Dremel. I bought a Dremel for the purpose of fragging corals in the future, but I’m a bit concerned about using it on some of the Blasto colonies I have growing since it can’t be as precise as a band saw. Great video, thanks! 💪
@sammielou
10 ай бұрын
I always learn something from your videos. love your channel!
@MrGarciaJr
10 ай бұрын
Still on vacation but finally had time to watch!!! Great video as always!
@joshneuman8803
10 ай бұрын
I'm in Spokane Wa. Huge fan! Watch your videos daily you guys rock🤘 so wish I could get corals direct from ya Thank you for the helpful info I'm about to frag my own hammer actually. Timing was just rite on this video. Best regards keep up the good work fragbox
@chrislovesky5402
10 ай бұрын
Thanks for the video! Love content like this that helps aspiring coral farmers
@Hozay1
10 ай бұрын
Top notch video.
@peterulvestad6418
10 ай бұрын
I can't believe they allow March to use power tools 😂🤣😂🤣
@fragboxcorals
10 ай бұрын
me neither
@corys.dietrich1448
10 ай бұрын
😂
@hermangrobler851
10 ай бұрын
Love the vids can you please setup the other studio tanks
@ou812reefing
10 ай бұрын
Tia your shop tank Looks Amazing and great frag station 👍🇺🇸
@brian-te4xs
10 ай бұрын
March, I saw the other day you left a very nice comment on Blue Reef Tanks channel. His channel overall is “Simply the Best”. Take care and always enjoy your posts.
@joaofernandothome8186
10 ай бұрын
Here in Brazil, we are hobbyists, we use a dremel with a diamond disc, which is much safer and cuts much better
@romualdomagtuloy3992
10 ай бұрын
The thumbnail reminds of Boris "not possible" 😂
@alexpellman8637
10 ай бұрын
Is that just a standard cutting wheel or is diamond the way to go?
@damiantosd8720
10 ай бұрын
Diggs is so cute. Watching whilst dog sitting the family’s 20 year old dog. Some days she is old other days she sprints like a pup. 😂😂
@chphqchef8000
10 ай бұрын
I started working at a LFS and got to frag some corals and tomorrow I get to go in early and help frag the new shipment we got in today super excited 😆
@bakedarea3885
6 ай бұрын
After you glue it down in your display, how do you frag it in the future? How do you remove it from the rock structure without damaging it? Does the glue not have THAT much bonding power? I've been using glue and epoxy on my hammers but now I am worried I will have to remove the entire rock to prune them in the future.
@carlsmit9981
10 ай бұрын
Fragbox video day is always the best day.❤
@fragboxcorals
10 ай бұрын
awwwwwwwwwww
@carlsmit9981
10 ай бұрын
Keep doing what you do. Shaky cam and all. 🎊
@SomeoneIsAlwaysMovingOnTheSurf
10 ай бұрын
I like to use a file to get that little edge that sticks off after using the dremel so the surface is flat
@ricktokaji200
10 ай бұрын
A GIVE AWAY NICE !
@Ray-wr2wr
6 ай бұрын
I see you have few vermetid snails, do they give corals hard time?
@BryznsReef
10 ай бұрын
Out of all the hammers I had that one grew the best for me too ! its odd the green splatter is a beast
@menolara17
10 ай бұрын
Going to share it with the world 😃 well mostly Canada 😢…
@thomast.8546
10 ай бұрын
Want to visit your store one day. It's a 5hr drive for me though. Would have to make a day trip.
@fragboxcorals
10 ай бұрын
come on by !
@peterulvestad6418
10 ай бұрын
5 hours, that's a day trip. 33 hours drive or 4 hour flight from here.
@Falteredsoul
10 ай бұрын
Haha that thumbnail is amazing!
@fragboxcorals
10 ай бұрын
glad you liked it :D
@Reeftankmaster
10 ай бұрын
cool how big a hammer colony can get 😃
@Sammy31Dee
10 ай бұрын
You get a new whip yet? Gonna put a low jack on this one right? Go full bait car in Toronto 😂
@josephposada1830
10 ай бұрын
It's great that Tia is supervising 😂😂😂
@luissegadepinin8780
10 ай бұрын
Por un momento creía que estaba en el dentista..... Ñouuuuuuuuuu.... 😂😂😂
@aigomorla
5 ай бұрын
You know there are diamond saw bits for the dremel that makes cutting though it a lot easier then a regular cutoff wheel. Also you should stress that one should wear saftey glasses when doing it with a dremel, as it has tendencies to throw stuff at you, and by some odds you win the unholy lottery, getting a coral frag shard in your eyes is not pleasent at all.
@MinusTwoTonsils
10 ай бұрын
Thanks! I'll be using my Dremel to frag at first. BUT!…my frogspawn and hammers are dropping heads. I recently upped my parameters for a better growth rate. Alk8.9-9, Cal 440-450 mag 1390-1400. I raised them over a weeks period time to those levels. Why would they be dropping heads? Flow isn't crazy. I'm about to pull my hair out cause my acans and favia have grown like crazy since the switch. Even my chalice has exploded. I don't get it.
@sergtv6907
10 ай бұрын
Do you have clowns
@FitLabb
10 ай бұрын
What levels did you start at for all those parameters? One week is a VERY short period of time to make any significant changes to water parameters as any changes should really take many weeks to even months to achieve. Stability in parameters is much more important than chasing better or ideal water parameters for most corals. Some corals are also more sensitive to changes in water chemistry than others, and euphyllia certain levels tend to fall into that category.
@bearded-flipflop7122
10 ай бұрын
I had the same issue,all of a sudden I started losing heads the only thing I could put mine down to was a mag cleaner that was leaching in the tank, I removed that and a couple big water changes and the rest were fine.
@MinusTwoTonsils
10 ай бұрын
@@sergtv6907 there’s 1 but he stays away from them.
@MinusTwoTonsils
10 ай бұрын
@@FitLabb Not far off actually. Like 8, 400, 1300 Also, people buy from coral farms everyday and acclimate them for only an hour. EVERY other coral is thriving since. They were dropping heads here and there before but seem to be doing it more now. I’m thinking it’s flow. I’m going to move them for a while and see what happens. Either that or my fire shrimp is searching for food in them. I saw him yesterday messing with the frogspawn. He kills my snails too. I’m not a fan. 😂
@FranciscoRodriguez-iw5id
10 ай бұрын
Try getting a diamond cutting wheel works way better then a regular cutting wheel for the dremel
@Reefkeepers_Archive
10 ай бұрын
"Hammers dont regrow from dead heads" oh march do i have a story for you 😅 The tanks really coming together! Though i want to know, are duncans the same as hammers (ie have a brittle skeleton) or can they be fragged with bone cutters. Anyway, heres an interesting story for you, i have no expirance keeping euphyllias, my tank is young and im not risking it, but that dosent mean i dont know anything about them. My LFS had a hammer colony die on them, white skeleton, no visible tissue, covered in algae ect, they decided to put the skeleton in a display tank because of the blue encrusting sponge that had overtaken it, i kid you not this hammer was ressurected, rose from the dead like a phoenix, about 2-3 months later, after the blue sponge had died off about 10 micro hammer polyps sprouted from the skeleton, theyre still alive now, not full grown yet though as this happened around april. Another great video though. Keep it up!
@tohka7365
10 ай бұрын
Which wheel did you guys use on your dremel? Been wanting to do this but wondering if I needed a diamond cutting disc
@chrissreef8978
10 ай бұрын
I have the same question!
@fragboxcorals
10 ай бұрын
we used a diamond cutting wheel
@quadlawnmowerman
10 ай бұрын
NOooooo March, don't saltwater your Milwaukie, it does not deserve to rust. Use something cheap and nasty with the saltiness
@andreas9181
10 ай бұрын
I love how March just casually drops the passcode to his phone XD
@rjlumley112775
10 ай бұрын
Order#234697 hasn’t been shipped out yet so maybe if there are any left? Also you keep saying you're going to do a live one. Is this going to happen?
@mikemcveigh7623
10 ай бұрын
How are you liking the organic/mins from fauna marin?
@caspermadsen1067
10 ай бұрын
Can you show acropora fragging?
@fragboxcorals
10 ай бұрын
we have in the past please search videos
@luissegadepinin8780
10 ай бұрын
Im sorry... I was fragging with my ametralladora 😅😂😂😂
@mcstan101
10 ай бұрын
how come you don't remove the vermetid snails at the same time?
@tb4368
10 ай бұрын
Remember to always wear eye protrction while fragging. You dont want skeleton in your eyes!
@marcusdoll487
10 ай бұрын
More fragging videos! (Acros)
@Puciferthegreat
10 ай бұрын
For this application you can buy the cheapest tool an buy decent discs and all is well. Makes super clean cuts for easy glueing too . Absolutely hate using bone cutters, only ever do if there is no other way . Split too many skeletons that way
@CGKFPV
4 ай бұрын
Shouldn't it be called Fragalicious
@Skyy_415
10 ай бұрын
I use dremel is great until u gave to chop a blasto or acan colonies, And damn, I just used a razor blade to clean glass on my 40g 😅
@TheLiddojunior
10 ай бұрын
Not in Canada so can't win :C
@ouchh100
10 ай бұрын
Those vermetid snails are nasty looking!
@kavinaat4003
10 ай бұрын
234677 >🎉🎉🎉 I posted the order # earlier but didn’t show hopefully this one pops up 🎉🎉🎉
@kavinaat4003
10 ай бұрын
Yeaaa hope I win ! Because last week I got a green tip torch and it diedddd😢
@rubenespinosa1685
10 ай бұрын
They go for 30 a head at any lfs but can get those green hammers for 20 just about anywhere in the north east 🫵🏼
Пікірлер: 66