That is an interesting method to get it to turn very cool
@horsdevors4559
Жыл бұрын
Get an old grenade from military surplus place it under the stuck cylinder, pull the pin, and run. (Don't forget to cover your ears).
@graemedalgleish8944
2 жыл бұрын
I bought a tractor with a stuck engine. I jacked up one hind wheel, put it into high gear, and started rocking the wheel back and forth. The faster you can spin the wheel the better.
@etherbanditsgarage9313
2 жыл бұрын
That’s a good idea
@clayatchison6667
11 ай бұрын
Close them not clise them. Sorry. I've got a 1953 john deere 70 gas. 9:49
@miltonodom8576
2 жыл бұрын
You talk too much and haven't worked on nothing. Talk while you work. You're wanting to show us that you're fixing the tractor. Almost half way through you finally start turning a wrench.
@etherbanditsgarage9313
2 жыл бұрын
I like to explain what I’m doing and give a little bit of a back story
@miltonodom8576
2 жыл бұрын
@@etherbanditsgarage9313the stories are fine but it could be said while youre working. time wasted
@miltonodom8576
2 жыл бұрын
@@etherbanditsgarage9313 kinda like whistle while you work
@roberthumphrey1304
Жыл бұрын
If it is really stuck pull the block, drill a 1/2 steel plate to fit the head bolt pattern. Fit a block of wood on top of the piston, place the plate on the wood block, install the nuts and torque down. You may have to shock it loose with a big hammer while under pressure. I've used this on a couple of old D's that were really stuck. One didn't have rings but the ring grooves were filled with compacted carbon.
@JS-kd7jf
Жыл бұрын
Been breaking engines loose by grease pressure in the cylinder,, for 45 years or more,,we invented that process here in my neighborhood,, not bragging just stating a FACT!! MY FATHER COME UP WITH THAT IDEA AROUND 1978 OR SO,,
@platinumsky845
10 ай бұрын
Hate to say but many people "came up with" that idea, good for him but it's been done that way even longer than he's been doing it.
@Truerealism747
5 ай бұрын
@@platinumsky845just connect to plug hole?
@nick-dm3if
3 ай бұрын
Hate to tell you man but we did it in 77
@docpalazola491
2 жыл бұрын
That 60 would make a great restoration project.
@etherbanditsgarage9313
2 жыл бұрын
That’s kind of the hope to eventually restore it
@sotm2
2 жыл бұрын
Next time fill the cyclinders with Kerosene NOT ATF!
@bigc1903
7 ай бұрын
How do you plan on getting the grease out of the cylinders? Dumbest solution I ever heard of.
@kennycriswell141
6 ай бұрын
Just a FYI if the clutch is stuck the motor wont turn.
@manyamile410
2 жыл бұрын
Grease jerk? You mean grease zerk?
@floydrhodesiv5733
Жыл бұрын
You should have sprayed the whole tractor down with kerosene or disel fuel ! That loosens every moving part up n keeps new weeds from growing up sround it, until you get to working on it .
@isbcornbinder
4 ай бұрын
If you have a stuck valve, the grease will escape.
@meusatrumtempestas
2 жыл бұрын
You can never have too many tractors.
@neil6212
2 жыл бұрын
Break up an old spark plug to make an adapter? Use the appropriate fitting from a compression tester, just don't use the hose.
@blueticlab4020
2 жыл бұрын
Pull the oil pan off and put a hydraulic jack underneath the crank on one of the lobes Jack it up and let the pressure set overnight it'll break it free
@etherbanditsgarage9313
2 жыл бұрын
2 cylinders don’t have oil pans to get into the crankcase you go through the top
@oxboustrophe1392
2 жыл бұрын
You can buy fittings that go in spark plug holes. They're metric (German's set the spark plug standard).
@johnwilkinson5718
Жыл бұрын
Is there a follow-up video with the tractor unstuck and the grease pumped and the tractor running and pulling a plow. You did a great job but with no follow-up video I'm heart broken. You could have heated the metal part on the plug and used pliers to pull the whole ceramic part out.
@etherbanditsgarage9313
Жыл бұрын
There is several follow up videos I got it running and am currently looking for tires
@johnwilkinson5718
Жыл бұрын
@Ether Bandit’s Garage sorry I didn't realize those videos were of the same tractor. I see now grease worked, but was a nasty cleanup.
@jimmoravec1326
Жыл бұрын
You should have left a valve open slightly to bleed the air out
@RonHelton
9 ай бұрын
👎👎👎👎👎👎👎👎👎👎👎👎
@jimthode
2 жыл бұрын
You have the hard part done with some movement. Now wrap a length of cable (1/4" should work) around the flywheel a few times with an eye in one end. Then put the end of the longest/heaviest bar you have in the eye and lever the engine over till free. The cable wrap trick worked on a stuck JD 50 that I broke free.
@etherbanditsgarage9313
2 жыл бұрын
Check out my latest video I got it turning very smooth
@terryraymond7984
2 жыл бұрын
wouldnt a disc grinder be easier
@clayatchison6667
11 ай бұрын
Did you know that the tractor has cock pits on it. Their up under neith. You open them and it will turn over alot easier. When it starts you clise them.ok 7:21
@horsdevors4559
Жыл бұрын
So you're busting the spark plug up, welding up the spark plug hole, re-drilling the spark plug hole and tapping it to do what ??????.
@stevenherner298
2 жыл бұрын
Use vinegar like puddins fab shop
@arachnipope
8 ай бұрын
From personal experience: I came up with the bright idea to bolt an aluminum plate with a face o-ring and a grease fitting onto the cylinder block of a seized F-head Jeep engine. I pumped it full of grease and felt something give. Upon removing the plate, I saw a gaping hole in the cylinder wall and the piston had not moved. Cylinder walls are thin and weak due the need for water jackets. It took very little force on the grease gun handle to destroy the block.
@thegreenerthemeaner
2 жыл бұрын
About all of the 52 model 60s had oval slots in the rear cast wheels. Someone change them or it's a VERY late 52.
@etherbanditsgarage9313
2 жыл бұрын
I noticed that as well when I purchased it and thought it was pretty weird my 52 50 has slots in the rear centers
@williamsnipes7608
2 жыл бұрын
You can bend things, I've heard by force. I'd prefer not bending things. After all, it's already been sitting a long time.
@etherbanditsgarage9313
2 жыл бұрын
Yes but on a tractor with little to no value why not try new things
@williamsnipes7608
2 жыл бұрын
@@etherbanditsgarage9313 Running JD 60. Maybe as much as $2,000.
@platinumsky845
10 ай бұрын
@@williamsnipes7608yes, a RUNNING 60.
@olivertaylor8788
2 жыл бұрын
To much talk and no action
@bennyogden4524
2 жыл бұрын
I like your channel man keep up the good work I love that old iron
@etherbanditsgarage9313
2 жыл бұрын
Thank you I enjoy playing this old iron as well
@fredpierson7488
2 жыл бұрын
The rings still be frozen to the pistons
@etherbanditsgarage9313
2 жыл бұрын
Stay tuned for war is to come it will definitely be exciting
@robertpayne2717
2 жыл бұрын
Years ago I had an International truck with a red Diamond 6 cylinder engine that was stuck, we pulled the head one friday and put a mixture of atf fluid and wd40 on top of the pistons over the weekend and used a true 4 by 4 oak block and a sledge hammer and hit the tops of the cyinders I got on top of the engine and had someone else drive while we pulled it in gear went about 300 ft. and it broke loose i I still had to beat on the cylinders abit and broke loose we did an inframe overall and carb rebuild and I used that old R-190 International trk and a 34 ft flatbeed trailor to haul cotton bales from our gin to to the compress the next 4 years could load about 36 bales at a time. The truck was sold in 1980 at my granddads estate farm sale and the man that bought it drove it home
@Texaskeykeeper
2 жыл бұрын
Can you make me some of the spark plug things? lmao
@etherbanditsgarage9313
2 жыл бұрын
How many do you want
@duanebolen543
2 жыл бұрын
He can also bend the connecting rod on the other piston or even on the Piston that he's trying to push
@etherbanditsgarage9313
2 жыл бұрын
I thought of that but when I’m playing with a 200$ tractor why would it matter that much? It never hurts to try new things
@duanebolen543
Жыл бұрын
In our area it is hard to get John Deere parts so why would you want to ruin it for no reason at all
@platinumsky845
10 ай бұрын
@@duanebolen543it's already "ruined", he's just giving it a better chance to work again.
@mauricevandoorne7443
Жыл бұрын
Put cleaning "ammonia " into the cylinder and let it stand for a couple of days.
@blackstone3323
2 жыл бұрын
I love these old tractors, cant wait to hear it run. Also people making comments on here should be nice about it, why be nasty too others.
@war7334
11 ай бұрын
I dont know if that was the easy way to free a stuck engine but it worked.Im looking forward to seeing it running.
@lookingbehind6335
2 жыл бұрын
We fill the cylinders with Marvel Mystery Oil and let soak overnight. Then throw 24 volts through the starter. It’s worked 100% of the time for us.
@etherbanditsgarage9313
2 жыл бұрын
That’s a good idea
@platinumsky845
10 ай бұрын
What about for a hand start JD model H?
@samstrucks
Жыл бұрын
Man guys just be whining on here
@RichardHathaway-f6y
9 ай бұрын
Brake fluid works to break pistons loose.
@jefferypowell9885
11 ай бұрын
Why not use an adapter for a compensation gauge
@johnseavey6622
2 жыл бұрын
If there is a valve open it won't work
@etherbanditsgarage9313
2 жыл бұрын
That’s why I pulled the valve cover
@tomrobards7753
2 жыл бұрын
FYI that settle bulb is for trash in the gas tank ,I has a separate screw in switch for the oil pressure shutdown , I've have a all original untouched John Deere 50 with all the options and cider vinegar will unstick the clutch after spraying the clutch disc several days
@etherbanditsgarage9313
2 жыл бұрын
How about just taking the clutch apart it’s like 3 bolt and that way I can properly adjust it as well
@bufford5483
2 жыл бұрын
I used to farm with an old John Deere R in the late 70's. It ran great, including the gas pup motor.
@craigsmith8217
2 жыл бұрын
That white stuff in the spark plug isn't your dad's porcelain. It is a tough ceramic, as you found out. Try to find very old spark plugs for the fragile stuff.
@etherbanditsgarage9313
2 жыл бұрын
Good point
@drgw489productions
2 жыл бұрын
Two words: STACK CAP
@etherbanditsgarage9313
2 жыл бұрын
What
@richarddavis3007
2 жыл бұрын
Put a nut on it the same as the alimite and weld it
@andyrobinson339
2 жыл бұрын
You talked about disconnecting one piston...did you do that and if so how???
@etherbanditsgarage9313
2 жыл бұрын
I didn’t end up doing that but if I would have there is a cover on the top of the crankcase that gives access to the rods to disconnect them
@terryraymond7984
2 жыл бұрын
dont weld the vise shut LOL
@allenhanks7719
Жыл бұрын
Turn the starter
@terryraymond7984
2 жыл бұрын
nO that glass bowl is the sediment bowl out of the Gas tank, LOL
@etherbanditsgarage9313
2 жыл бұрын
I want to remove the oil pressure activated sediment bowl that was a fail from the factory and put a manual sediment bowl on it
@heathwood2102
Жыл бұрын
The clutch is stuck
@Ray-lo4hr
2 жыл бұрын
I love that tractor, Canada
@davecotton7086
Жыл бұрын
Grease Zerk
@jamesolson9423
2 жыл бұрын
It is not a 52, because it has 1956 rear cast wheels.
@etherbanditsgarage9313
Жыл бұрын
Your gonna tell me that they couldn’t have been changed at some point
@terryraymond7984
2 жыл бұрын
Take the clutch apart first then free the engine.
@etherbanditsgarage9313
2 жыл бұрын
Watch the next video in the series you will find out what is wrong with the clutch
@gunrunner4747
2 жыл бұрын
Are you grounding your welder through the vise? Never a good idea unless I missed something.
@etherbanditsgarage9313
2 жыл бұрын
Why it’s worked for a long time for me
@gunrunner4747
2 жыл бұрын
It’s not a good idea because you’re ground is running through the screw of the vice. At least you should ground directly to the solid side jaw.
@jimmoravec1326
Жыл бұрын
@@gunrunner4747 True, you should always ground directly to your project you are welding
@NebukedNezzer
2 жыл бұрын
not even enough sense to cover the exhaust.
@etherbanditsgarage9313
2 жыл бұрын
Did you not notice that I got the engine unstuck so what’s it matter if the exhaust was or wasn’t covered
@Texaskeykeeper
2 жыл бұрын
We pulled this out of a fence row where it had been uncovered for many many years. I don't think there was too much harm in a couple more days.
@NebukedNezzer
2 жыл бұрын
@@etherbanditsgarage9313 obviously you are not to smart. the exhaust needs to be covered to keep rain/snow precipitation out of the engine. how do you think the engine got stuck in the first place? don't give me grief because of your failures.
@NebukedNezzer
2 жыл бұрын
@@Texaskeykeeper you fail to understand. its important for people who have tractors and other engines to keep water out of the exhaust so the engine doesn't rust up inside. you don't mention this so? someone has to.
@kevinhoffman8214
2 жыл бұрын
It may be better to use rust penetrant to free it , forcing it may break the rings/pistons , how are you going to get the grease out without a teardown ?
@jimthode
2 жыл бұрын
Just turn the engine over and it will blow out the exhaust or spark plug hole. That will get most then some solvent/gas will get the rest. I've used this method on a 4 cylinder Case that I had no way to lever over with a bar.
@etherbanditsgarage9313
2 жыл бұрын
I did actually have the cylinders full of atf before I put a grease gun on it so it did have some lubricatiom
@jamesolson9423
2 жыл бұрын
It does not have the tact out let, which is located on the left side of the engine. Also it des not have factory power steering. That tells me that it could be a late 1955 model.
@richarddavis3007
2 жыл бұрын
You can heat up the metal part up on the plug and the porcelain will come out
@darltennant6005
2 жыл бұрын
Why does three in one rust preventer come in plastic can instead of the old reliables metal can? Afraid of rust?
@etherbanditsgarage9313
2 жыл бұрын
No idea
@jamesolson9423
2 жыл бұрын
It has a 4 spoke steering wheel. The 60's that had power steering had a 3 spook steering wheel. In 1956 John Deere made power steering slandered equipment on the 50, 60, & 70 models.
@michaeltrinkle4197
2 жыл бұрын
Pidley videos are ok.just keep em real.a tip on stuck stuff always cover the exhaust.pull all drains and check for water and rust.snug drains up an mix diesel an cheap oil or straight fuel no gas never.fill crank case all you can get in.fill the cylinders full.trany to and walk away for a couple months.when you try to free em up.rock em back an forth.dragging spins bearings and bends and break stuff sometimes.very good video.telling the story by steps.it's all good.ask viewers questions when you need.suggestions etc.real videos are never boring.good job.
@tomrobards7753
2 жыл бұрын
You will be amazed what cider vinegar will do I a few days of use , it eats rust and nothing else . Used for many many years got it from and old John Deere dealer foreman mechanic 40 Year's ago
Пікірлер: 114