GET YOUR KIT HERE: shrsl.com/4ke0x SHOP MERCH HERE: darkirondiesel.com/
@kv522
4 ай бұрын
Wow! Now I understand why they quoted me over 5K do get mine deleted. Doesn't seem so steep now... Great Job and thank you!
@taylorh955
3 ай бұрын
Dude, I thought the ford was hard, wtf gm!!??
@jaydog5900
5 ай бұрын
Anyone doing this for the first time like I just did today, I highly suggest letting the company that made your tune file rewrite your ECM for you. They had me install Anydesk on my laptop, and they were able to remote install my tunes for me. The tune software is the only part of this project that had me nervous 😅 Having them install it for me took all the worry away, and they are super nice too
@darkirondiesel
5 ай бұрын
Did you watch my “how to tune L5P video”?
@jaydog5900
5 ай бұрын
@darkirondiesel yes I did, and it was extremely helpful. I would have completed it all using the video, but I was sent the wrong tuning software. They finally got the correct software for me, and since I had them on the phone, I asked them to install it for me. They did a couple extra steps I didn't see in your video. I assume it was due to hp tuners having done some updates to their own software. I really appreciate your videos, and I couldn't have done any of this without your videos.
@jaydog5900
5 ай бұрын
@darkirondiesel although since I got your attention, I do have a question. Hopefully, you can answer. After my EGR delete, I have a code for fuel regulation range. I was curious if my 2017 should have that throttle body plug installed. Your video said to leave it unplugged. Any ideas where my issue is? Thanks... Update.. I plugged everything back in and have definitely narrowed my issue back to that throttle body plug you said in the video to leave unplugged. With it unplugged, I get a code of P0002, and with it plugged back in, I get a code of P0001. The P0001 says fuel volume control regulator circuit is open, and the P0002 says fuel volume regulator control circuit range/performance.. Do you have any idea if I need a can bus plug here? Thanks
@go4brp2
5 ай бұрын
That’s funny. I literally did the same exact thing today for mine! Called them, they literally did EVERYTHING for me software and tune-wise. Much easier. And thanks @darkirondiesel for these videos. Extremely helpful, and also saved me 3 extra grand for someone else to do it.
@OutDooRider2008
14 күн бұрын
How long did the full delete take you and what special tools where needed to make the job easier
@adambissell2706
14 күн бұрын
Absolutely amazing how much more involved this is than when I did EGR delete and straight pipe on my '06 LBZ.
@good0554
5 ай бұрын
Great video I have been waiting for almost a year for something like this. Thank you
@GeekdOut
5 ай бұрын
Nice to get the Chevy/GMC on here. Insane quality on these "How To" videos. Would love to see some LML content if you can get one in your shop.
@darkirondiesel
5 ай бұрын
I have a couple older videos showing how to delete the LMLs on my channel as well!
@timothyderienzo5833
28 күн бұрын
@@darkirondieselsure does! I’m so grateful for you bro! My 15 LML is now SHOW READY, and it all started when my strangling equipment started failing a year ago. Found your videos, another guys channel @Truckmasterdiesel mentioned @thedieseldudes and I did it all myself. Seriously, can’t thank you enough man….. the time you w spent editing these does NOT go unnoticed or unappreciated!!! You’re a G !!
@michelmartinez6920
2 ай бұрын
Man!!! What a good video, that sound of the turbo made my day!!! Im finishing mine soon
@texasson
5 ай бұрын
Did my 2020 about 6 weeks ago... But I got my kit from a different company, but looked exactly the same(even the coolant hoses that were too short). I wish I would've had this video before then. lol. It really wasn't bad. The V-band clamps were the biggest pain in the ass under the hood.... That front canister on the exhaust was the biggest pain in the ass for the exhaust.... for me. But it was a fun job. Also, at 11:04, I just reused that hard coolant line for the coolant return from the turbo... It prevented me from having to buy more hose, and it gave it(in my opinion) a little cleaner look. Only issues, When I start the truck, I get a DEF fluid low message and have to clear it. It's only when I start it, and doesn't cause any issues other than I get the message. Also, really weird, my trailer light plugs haven't worked since I free'd my truck. Flashed stock tune back on truck just to be sure, but still no power at the plug. All fuses look good. IDK. Good video! It will definitely help a lot of people.
@justin_steen
4 ай бұрын
Hey who did you get your kit from? I was looking at the one from elite diesel but don’t want to get scammed lol.
@texasson
4 ай бұрын
@@justin_steen I used Unlimited Performance.
@andrewbrowning-gm7nd
4 ай бұрын
@@justin_steenI just tuned my truck and bought kit from elite diesel they had the tune file to me the next day. Good service,,
@d34d2r1ghts
3 ай бұрын
i had a fill def 100 miles till 185 max mph message l0l i had to play with the def plug on the driver frame. plugged it back in and filled it up and just had to play with it eventually i got it to stay off. i did the delete when the def tank was basically empty.
@RandomStuff-zt6qf
Ай бұрын
which kit did you get? was it cheaper? The one linked in this video is $5500 which seems steep...
@alanbagel2204
6 ай бұрын
I paid to have mine done now I'm glad i did Cummins was way easier Thanks for the content
@darkirondiesel
6 ай бұрын
Yeah this is definitely a pretty big job!
@alanbagel2204
6 ай бұрын
A good portion of my Cummins upgrades were done watching your channel like an instruction manual thanks
@sarahbenavides2757
2 ай бұрын
Wonder why a y bridge hasn’t been made bigger yet, got CAI , turbo horn , downpipes, exhaust, boost pipes yet y bridge remains the same.?
@LTDan-pk3mx
3 ай бұрын
Amazing Job! Its hard enough but with your camera I cant imagine how difficult that job would be.. Great jog though.. I am thinking about getting a 17 one ton dually crew and deleting it with all the parts from Diesel dudes.. I totally think it will be worth it in the long and short run!! Thanks again buddy!!
@JeffAllen-o6q
14 күн бұрын
I'd buy from Diesel Dudes in a second if someone could tell me if the tune can be loaded with a def code. My truck (2017 L5P) is a work truck and I could careless about idiot warnings as long as the tune works. No sense in deleting if you have to spend $5k at the dealer to resolve def codes first...
@JustinCyr-c8x
3 ай бұрын
Hey, thanks for everything you do. You make life a lot easier for all the other techs out there.
@darkirondiesel
3 ай бұрын
I’m glad! To be honest I often reference my own videos myself haha
@TheKlamminator
3 ай бұрын
It is surprising that the Canadian government doesn't care about deleted diesels considering who's in charge. Wish this wasn't even necessary, i hate emissions and the EPA
@cjhead804
5 ай бұрын
I just got done deleting my lml, uppipe/downpipe and i thought that was the biggest pain, jeez
@area777th
5 ай бұрын
As much as I’m interested but my 2024 is a 90k$ truck 😅. Maybe 5 years from now. I’m nervous but I’ll pay someone like you who knows how. 🔥🔥🔥
@akavize
6 сағат бұрын
can’t delete the 24s right now anyways lol
@lucasmancini7415
6 ай бұрын
When I deleted my 2023 l5p I just cut the scr in half. Aka the one on back of turbo. I didn’t remove the turbo. Took me 5 minutes to cut the scr out. To each their own. Also for the coolant return line on turbo to coolant tank I just used the metal hose that you threw away in the beginning and added a short piece of hose to the end to connect to the turbo. Looks a little cleaner and attached to the y bridge just like oem. But your way works also but have to buy a new hose.
@lucasmancini7415
6 ай бұрын
Also good move using the oem fittings on the heater core lines. I used the aftermarket plastic ones that my kit came with. (Not diesel dudes kit) and I was towing and one of the heater core hoses blew off lost all my coolant in the mountains. So anyone doing this definitely reuse oem fittings.
@lucasmancini7415
6 ай бұрын
Also I left alternator in the truck it’s totally up to whoever installing. It can be taken out or left in. Makes more room to work but is still doable to leave it in place.
@darkirondiesel
6 ай бұрын
Thanks for all the advice and insight man! The viewers will appreciate it for sure!
@lucasmancini7415
6 ай бұрын
@@darkirondiesel no problem that’s what it’s all about. I was hoping you did this video before I did my kit about a year and a half ago. I was waiting and waiting but never came. And there is no good videos of l5p delete installs on KZitem or anywhere for that matter. So I’m sure this will definitely help out a lot of guys. I’ve done Cummins before and thought it would be easy. Well I was wrong lol. Way different than a Cummins that’s for sure. But keep the videos coming great work man.
@ZKing628
5 ай бұрын
What did you use to cut the scr? I'm doing my truck this weekend and any other little short cuts will help a ton along with darkirons video.
@BrendonBentz-vb2gn
5 ай бұрын
That pin you put in the def injector line actually goes where the 9th fuel injector is on the driver frame rail.
@VRGamingTherapy
5 ай бұрын
I was wondering this. On my 19 it says to remove that hard coolant line from the exhaust & plug the 9th fuel injector on the driver side... I guess this is an alternative??
@samtuck4812
2 ай бұрын
Would you know what pin actually goes into the def line?I need a plug ,spraying def all over my truck
@RandomStuff-zt6qf
3 күн бұрын
@@samtuck4812 you don't need to plug those two def lines, just run the one hose from one to the other and bridge it off.
@RandomStuff-zt6qf
3 күн бұрын
Yup! Snap the little yellow tab over, pop off the fuel line, plop that pin in and snap the yellow tab back in place.
@sleeeper88
5 ай бұрын
Painfully waiting for something to come out for my 2024 zr2 bison duramax. I am used to my twin turbo lmm that makes 800 wheel lol
@NewEdgeCarpentry
5 ай бұрын
Can’t wait to get the kit for my 2017 🔥🔥🔥🔥
@bryanspanjer3213
Ай бұрын
I will need two hands to do this job. One day, maybe just one like you.
@RandomStuff-zt6qf
6 күн бұрын
2:58 do not cut those hoses, unbolt the bracket from the frame, unplug the electronic connector and then that whole piece goes with the exhaust
@midnightl5p
2 ай бұрын
Thanks for this video, really helping me through doing my own. Man what a pain🤣
@MikeOxlong69695
6 ай бұрын
Maybe just a quick vid or breakdown on how to unplug egr and leave in place? Like if i was to delete dpf and tune truck but leave everything else in place. Hypothetically on my farm truck. Thanks
@darkirondiesel
6 ай бұрын
I’ll try to get a video like that done next time. But honestly if you just do the exhaust removal, exhaust install, can bus plugs and unplug throttle valve you’d probably be ok.
@MikeOxlong69695
6 ай бұрын
@@darkirondiesel thanks bro!!
@willcheney5918
4 ай бұрын
you needed to go over what the 2017-19 models say about the new bypass hoses im so confused with this part and it doesnt help that the diesel dudes didnt send me a pdf or a instruction manual for installation so all i have is your video i have now seen over 15 times.
@darkirondiesel
4 ай бұрын
You should be able to make it out of your pause the video when I show screenshots of the instructions, but next time I get a 2017-2019 in for an egr delete I can see about making a second video
@andrewreddick
5 ай бұрын
Holy cow. Glad I have a cummins. That's intense.
@tomasnordin9778
5 ай бұрын
A question,regarding the exhaustsystem.Why don't you just take the DPF unit,clear/remove what's inside it and put it back,you save money,and it looks as if it is still in place ? Regards from Sweden
@ryandriverhidatsawarrior3034
5 ай бұрын
That’s cool how yours goes in my buddy had to put a T in for the coolant line🤔
@justinschnepf
5 ай бұрын
Just a minor correction. You called the component behind the turbo the SCR. That isn't correct. The SCR is the component located between the cross members downstream from the DEF Injector. The component behind the turbo is the DOC. So it goes - DOC - SCR - DPF.. then out the tailpipe.
@darkirondiesel
5 ай бұрын
Ah good to know. It’s all the same crap in my mind
@tanh1018
3 күн бұрын
@@darkirondieselif someone, hypothetically, left the DOC on behind the turbo, but still lost the rest of the exhaust, would it at least sound somewhat deleted? Removing the turbo seems like sooo much more work.
@Micheboss18
6 ай бұрын
Amazing job man 🤙🏼👊🏼🔥
@darkirondiesel
6 ай бұрын
Thanks buddy I appreciate it
@cantstopwontstop976
21 күн бұрын
Might be a silly question but by getting rid of all the filters in the exhaust does this delete the def fluid as well or is that a separate delete?
@masonguin6094
5 ай бұрын
Can you show how to remove the def tank
@joeb.8625
Ай бұрын
Where is the cat behind the turbo? Is it attached to the turbo or is it in the DP?
@samtuck4812
2 ай бұрын
Would you happen to know what size the def plug is?i have 3 options... 1/2 3/8 5/16...my truck is a 2017....thanks
@joenowe5964
5 ай бұрын
Have you ever had the opportunity to delete a ecodiesel jeep wrangler or gladiator? Cant find a video of this process anywhere... Would be awesome if you could do one eventually!
@jerryalfonso4535
6 ай бұрын
Excellent video
@darkirondiesel
6 ай бұрын
Thank you
@Broncort1
5 ай бұрын
Just WOW! It doesn’t take long at all to be at a point of no return. There’s certainly no going back after making your truck federally illegal. Quite a ballsy decision, although I can hear the benefits when the engine is running. Great video, I was watching intently!
@JosephPerrigoue
5 ай бұрын
Now someone crack the code on the global B ECM!!!
@kylebeal5673
4 ай бұрын
So does the tune come from diesel dudes or HP tuners? The bundle from DD makes it sound like they give you a tune, but your tune video makes it sound like HP writes it.
@akavize
6 сағат бұрын
HP does not write tunes
@ScaryHours23
2 ай бұрын
Does the WCF down pipe work? Or do you have to buy the diesel dude down pipe? My 2023 already has the down pipe in.
@edwinfruean4286
3 ай бұрын
Any way I can get those instructions? My kid decided to paint mines. Or where can I get the instructions?
@Chris-nk2wi
Ай бұрын
Deleting my 18 right now the sensor you cut with metal line do you just leave it hang or take the whole line out?
@tonylanzone5672
5 ай бұрын
Thank you!! Very helpful video brother.
@boistoys5451
4 ай бұрын
When will they have something for the baby 6 cylinder duramax ???
@ironcladranchandforge7292
2 ай бұрын
Good Lord!! Thank God I own a pre DEF diesel truck with low miles. I'll drive my truck forever just so that I don't have to deal with this sh!t !!
@nt3523
3 ай бұрын
We just bought this kit for a 2020. Ordered the down pipe and 4" kit that uses the stock tailpipe. The first piece of the 4" exhaust wouldn't clear the tranny crossmember. We already had the down pipe in so we had to cut the flange off and shorten the pipe. So either the down pipe or the first piece is too long. We tried to contact Diesel Dudes on a Friday and didn't hear back til Tuesday. They claim everything was right, we just didn't install it correctly. Bullshit. I've forgot more than most guys know. There's no way that exhaust would've fit correctly without shortening one or the other. I think once they got paid, they don't give a crap. Next time I'll just source the parts seperately and save a pile of dough.
@darkirondiesel
3 ай бұрын
I’m sorry you went through that. I didn’t have any problems with mine and I haven’t had any negative feedback like this either. Maybe it was a one off situation, either way that’s unfortunate.
@nt3523
3 ай бұрын
@@darkirondiesel Yours was a 5", correct? I'm thinking they sent us 4" for a 17-19 maybe. There must be something a little different with 20 and up. I've looked up a few other exhaust kits and some are listing 17-23 and others have a separate kit for 20 and up. Idk, we already fixed it, but I won't be going down that road again.
@alexisguerra222
2 ай бұрын
Hello i have a 2017 silverado 2500hd l5p can you please give me the link to purchase the delete kit with down pipe please? Thabk you
@ZachLarson-hg6gl
2 ай бұрын
What happens if you don’t cap off the sensors u didn’t plug back in?
@joeb.8625
5 ай бұрын
Dose the dp come with it? Since you’re a pro how Much do you charge without removing the egr incase I would want to revert back?
@devenpetty
26 күн бұрын
Did anyone have an issue getting the down pipe on the back of the turbo? The pipe I got from diesel dudes bottoms out in the turbo and the gap is too big for the V band clamp to secure them together
@SUBI_PaT
6 ай бұрын
Nailed it love it my dude awesome shit again
@darkirondiesel
6 ай бұрын
Thanks bro
@gemcityfireman
5 ай бұрын
Do you have any idea where to find that u-bolt style clamp with hanger? Finding a 5” is almost impossible, my Flo-Pro on my 6.7 only has the one hanger welded on, adding that clamp I could grab another hanger. Thanks man! Great video on the L5p, definitely a bit more work than us 6.7 guys.
@lylenelson7446
4 ай бұрын
Jamo makes them
@juantoledo2286
18 күн бұрын
You have the installation manual able for download?
@GustavoVital-q8x
2 ай бұрын
How long did it take you to do egr delete and downpipe ?
@RandomStuff-zt6qf
Ай бұрын
How many hours do you think it would take a normal person to do this?
@MrAndresm900
Ай бұрын
Has the EPA knocked on the door yet?
@robertburgess6100
6 ай бұрын
Good video 👍
@darkirondiesel
6 ай бұрын
Thanks 👍
@just_a5oh
2 ай бұрын
Does this also work on the 2024s ?
@RandomStuff-zt6qf
Ай бұрын
Boy that's a lot of money and work... but I want to do it haha
@ryanwagoner5049
Ай бұрын
Nice video, would you think a kit from Elite diesel or Tuner depot would be fine? All the same components but would save me about 1k.
@darkirondiesel
Ай бұрын
I get messages almost daily from people who purchased from those companies that are having problem after problem. And their customer support is basically nonexistent, all they care about is the sale and getting their money. I’m not saying it won’t work if you buy a kit from them, but I’ve just heard so many bad things.
@ryanwagoner5049
Ай бұрын
@@darkirondiesel thank you for the reply! I decided to pass on them. Most on the L5P forum on FB said to stay away as well. I’m going to go through a vendor in the forum who is local and will do custom tuning. Can’t wait to get it done! Watched the video 4 times already lol. I appreciate your help sir!
@1320pass
5 ай бұрын
Hey. So if your L5P EGR stuff falls off and you're allergic to block off plates, what's a good aftermarket exhaust manifold and up pipe setup? If any..
@gcflower99
5 ай бұрын
PPE has higher performance manifolds and up pipes for Duramax.
@waceyquinney5112
Ай бұрын
You ever take it off any sweet jumps
@code10garage94
6 ай бұрын
Awesome vid bro👍🏽…Aloha🤙🏽
@darkirondiesel
6 ай бұрын
Appreciate it!!
@RheonHassell-q1g
Ай бұрын
Great Video, Question for you if I remove the cab can I do the full delete without removing the turbo? thank you!
@darkirondiesel
Ай бұрын
Yeah if you have the cab up even just a couple inches I don’t think you’d have to pull the turbo
@RandomStuff-zt6qf
3 күн бұрын
yep loosen the 4 bolts on the passenger's side and jack it up a few inches, no need to pull turbo, much easier this way
@fasttech77
13 күн бұрын
Pull the wiper cowl instead of the turbo to remove the DOC. It’s not an SCR.
@tanh1018
3 күн бұрын
Does that actually work?!? There’s for sure enough room to get it out that way?
@fasttech77
3 күн бұрын
100%.
@DEmechanic2000
6 ай бұрын
Is it possible to just do an egr delete but keeping scr and dpf stock just to be more lucrative instead of having a 4-5in straight pipe especially like here in the states but while still not getting that terrible soot through rerouted back into the engine since the egr is gone
@darkirondiesel
6 ай бұрын
Hmm I don’t think so unless you got a tune written specifically for you that only disables the egr but leaves the dpf/def system active.
@COLTSWAY
5 ай бұрын
My man! 🇺🇸🦅🇺🇸
@lilhermzz
13 күн бұрын
Anyone lift the cab rather than removing the turbo?
@AliMdwb
Ай бұрын
some guy did a delete for me, for the l5p 2017, i just send him my ECM and he unlocked it and delete the def, but I dont know why you did not do this but he was asking me make sure that i dont need to add more fob keys, because he will cancel the IMMO, now the truck is deleted already but always security light is on, and i can start it with any key, is that normal for the 2017-2019? because i saw all your videos and I didnt see anything like that with your video and you did not mention it
@darkirondiesel
Ай бұрын
No I don’t think that’s normal. I don’t know what he did to make it like that.
@AliMdwb
Ай бұрын
@@darkirondiesel that’s weird, What I supposed to do now?
@darkirondiesel
Ай бұрын
I don’t know man I don’t know anything about who did the delete or what he used for tuning
@AliMdwb
Ай бұрын
@@darkirondiesel he did it with HP Tuners, as the offical website of HP Tuners he use the same instruction and yes immoblizer relarn is required via official GM tool, I've checked the website
@Air_Tech09
5 ай бұрын
You are the man!!!
@xmerda2458
4 ай бұрын
When will be getting a 2024 delete?
@RonJones-k4p
2 ай бұрын
Just curious if the Diesel dudes give torque specs for reassembly in the instructions?
@darkirondiesel
2 ай бұрын
No I don’t think so, but honestly I never really use torque specs unless it’s an internal engine component for the most part. If you bottom out all these bolts or nuts then give a good final “snug” you won’t have any problems.
@darkirondiesel
2 ай бұрын
I think there are torque specs on a couple of the bolts, the important ones, but other then that it’s just up to you to use your common sense
@seandunn9339
23 күн бұрын
Bro … bravo .. bravo
@jlraynor3307
4 ай бұрын
Do you install the can bus plugs before or after you install tune files?
@darkirondiesel
4 ай бұрын
I don’t do anything until I’ve tuned the truck successfully
@AlexThomas-uq8pt
5 ай бұрын
Hey, followed your video and the instructions. The delete itself was pretty simple and easy but afterwords I am getting a error message on my dash saying service exhaust fluid system, max speed 158mph. Any advise or tips you could privide?
@joehowell979
5 ай бұрын
Try plugging your def tank and nox sensors/particulate sensor back in and turn the truck on. If that doesn’t fix it, apparently it’s a tuning issue.
@darkirondiesel
5 ай бұрын
Yes contact the company that made your tunes
@diesel7903
5 ай бұрын
I have a 2015 crew cab short box. I want to get a 5 inch full exhaust with muffler but I also don't know what I sounds like with a straight pipe. Could I use one of those extension pipes that the kit comes with?
@darkirondiesel
5 ай бұрын
You could but you might have to do some welding. But my advice is get the kit with the muffler, it’s much easier and cheaper to swap the muffler out for a piece of straight pipe in the future then to buy a muffler in the future.
@darkirondiesel
5 ай бұрын
Also this is the link for the LML kit shrsl.com/4bmpm
@diesel7903
5 ай бұрын
@@darkirondiesel So the pipe for the crew cab long box won’t replace the muffler?
@raymondfrank9202
16 күн бұрын
good one
@anthonyportugal9013
6 ай бұрын
Can't you get away by just unplugging the EGR or is it necessary to delete it
@darkirondiesel
6 ай бұрын
You can but then you still have the SCR filter in the exhaust behind the turbo.
@Anonymous-wu8mg
3 ай бұрын
I’ve heard you have to mess with your injectors doing this is that true?
@darkirondiesel
3 ай бұрын
False
@philipneville3172
5 ай бұрын
Kyle I need you help man I have a 2019 and I’m having a hard time installing the plug for the def tank It seems like it is too big just to make sure I’m plugging it in the right connector it is on the bottom of the def tank right????
@darkirondiesel
5 ай бұрын
Did you watch the video where I go over the can bus plugs? Is that what you’re talking about? The video has chapters, go to the can bus plug chapter. I’ve never done a 2019 but maybe the tips and tricks I have for this 2020 will help you out. The def harness connector on this truck has to be popped into the right position to work. I show it in the video.
@philipneville3172
5 ай бұрын
Yeah I did turns out it was on top of the passenger frame above the DEF tank I guess it’s different location for the 17-19 thanks for the help anyway tho
@jaydog5900
5 ай бұрын
I won't be removing the filter behind the turbo or installing a downpipe. Do i just leave the sensor wiring? Leaving it as is won't end up making the check engine light come on, will it?
@darkirondiesel
5 ай бұрын
Yeah you should be ok to just leave the sensors but make sure the can bus plugs are installed correctly.
@tanh1018
3 күн бұрын
Did you end up leaving the DOC behind the turbo? If so, how does it sound?
@randomwhiteguy2.073
6 ай бұрын
My God i thought my 2012 6.7 powerstroke was cramped this is just insane
@darkirondiesel
6 ай бұрын
This is actually an improvement from the earlier generation duramax engines haha
@randomwhiteguy2.073
6 ай бұрын
@darkirondiesel wow that's crazy. Good vid tho
@buffneilson
3 ай бұрын
How much to have this done?
@IllegalAlien-h1g
4 ай бұрын
Tree lovers will dislike this video
@stfard
3 ай бұрын
Trees literally eat carbon, they also grow faster when carbon content is higher.
@DirtBikeBoy8583
2 ай бұрын
@@stfard W
@chrisnewby5713
Ай бұрын
And they can Rot
@MikesGarageReviews
Ай бұрын
Better yet explain why in the hell anyone would do this
@DirtBikeBoy8583
Ай бұрын
@@MikesGarageReviews because deleting your trucks dont make them just run better, but it makes them sound better, they have so much more power, they get better mileage, they roll coal, it just makes your truck 10000000000% better.
@michaelprue9024
25 күн бұрын
I have a 2019 L5P I want to delete so bad I can taste it. I am still under an extended warranty and I don’t have a garage to work in, plus, it is the only vehicle I have. But I want that damm time bomb GONE. I know it’s going to derate me eventually and end up costing me as much if not more, to fix. I WANT IT GONE yesterday gone.
@joewolfe642
6 ай бұрын
Did you get rid of your '22 Cummins truck ? Mine gave me endless problems.
@darkirondiesel
6 ай бұрын
Nope I still have mine. Haven’t had a single problem since deleting it. What problems were you having?
@joewolfe642
6 ай бұрын
@@darkirondiesel What was written off as injector rattle at first (but within spec) became a "serpentine tensioner" fault and then the lifters failed. $35k down the drain. Always used Amsoil - and the recommended weight.
@philipneville3172
6 ай бұрын
Hey I ran into an issue today with the heater core connector, the one on the drivers side is angled up and the one on the left is angled straight. The way it was on from factory had the straight connector on the one angled up which made it had to remove and even harder to put back. Can I swap the straight and angled connector lines because they fit perfectly? The left side would go to the thermostat and the right side would go to the lower radiator hose. Any help would be really appreciated thanks.
@darkirondiesel
6 ай бұрын
Hey, I’m not sure if you can pump coolant backward through the heater core. I don’t see why not, but I also can’t confirm it. What year is your truck? Did you figure this out?
@philipneville3172
5 ай бұрын
It’s a 2019, and I still have them flipped for now. I’ll be able to start it this weekend so hopefully everything works as it should
@VRGamingTherapy
5 ай бұрын
@@philipneville3172 Ever get this figured out? I have a 2019 also.
@philipneville3172
5 ай бұрын
@VRGamingTherapy Yeah I just ended up switching them around, heat still works good and no leaks so far knock on wood
@LoganHicks-yc9ix
5 ай бұрын
Does the throttle valve stay unplugged on the 2019 2500hd? Just deleted mine but have it plugged in and its been running fine. The instructions never mentioned anything about leaving it.
@darkirondiesel
5 ай бұрын
A few trucks experience issues with the throttle valve plugged in that’s why they recommend unplugging it to eliminate that possibility. I’d suggest unplugging it, problems can pop up out of nowhere.
@LoganHicks-yc9ix
5 ай бұрын
@@darkirondiesel Thanks man! You released this 1 day after i finished my delete, wish i would have waited and watched this, would have saved a few headaches!
@1320pass
5 ай бұрын
I wonder if this valve is just for warmup strategy. Like closing off to force EGR gasses through the cooler to exchange heat. Maybe one reason quick warmup goes when the EGR goes..
@rob2300
6 ай бұрын
3.0 duramax next?
@janamaro5894
2 ай бұрын
LM2 first, Then LZ0 will be next when they release the kit.
@Humblescape
5 ай бұрын
EPA open up!!! (Rams door down)
@HTCREV
5 ай бұрын
I have almost everything ready for weight loss, I would love to do the work with you, I live in Florida, where are you located?
@darkirondiesel
5 ай бұрын
Very very far away in Canada
@Icutmetal
3 ай бұрын
You really had to ask?
@TheCarhartt1
5 ай бұрын
Find any screws in that lower egr 😂?
@SinSitySnakes
5 ай бұрын
So, how much do you charge?😂 Want to get mine done soon!
@joeb.8625
6 ай бұрын
Do I have to remove components I just would like to leave everything on and just change the exhaust
@darkirondiesel
6 ай бұрын
You can just swap exhausts, unplug the egr valves and throttle valve, then install can bus plugs
@joeb.8625
2 ай бұрын
How much do charge to do this for your fellow Canadians
@justinninke6405
Ай бұрын
Lmk when I should drop mine off. Lol
@xavierbuscato9427
5 ай бұрын
I just got my kit for a 2022 and still got the same coolant hoses as you. Lmfao
@WilksRiley
6 ай бұрын
Awesome video man keep it up. I have a 2022 gmc duramax that I want to delete. Just ordered the exhaust but wondering what tune and tuner to go with and my ecm and tcm are already unlocked. Does that make it easier to tune?
Пікірлер: 385