I love that you, as a male, have developed a passion for sewing, quilting and patchwork. I taught sewing for 30 + years to high school students, male and female. Often the males developed better skills than the females, but unfortunately, they did not follow through and continue sewing. Peer pressure? Anyway, as I said I love that you have taken to it wholeheartedly and show your love of the craft through your videos. Great job!
@cbubucsbasketball1510
26 күн бұрын
To set my edge guide, I use an index card. Draw a line 1/4” from the edge. Pierce with your needle directly on the line. Move your guide to the edge of the card and tighten. Perfect every time! I keep the card near my machine so I can quickly rest the guide whenever I need to.
@patcorona5979
21 күн бұрын
Wow! As a beginner I’m trying to absorb all that I can. Blew me away that the seam size can be affected by the thread weight, size and fabric. Blew me away. It makes a lot of sense. So much sense. Thank you for sharing.
@lauraparadis8190
13 күн бұрын
Thank you for this tutorial. This helped me find the perfect 1/4" for my sewing quilt blocks. I now get the perfect block!
@vickiewilliams3259
Ай бұрын
Yes, this is the only way to go if you need a perfect quarter inch. Your seam allowance can change from project to project just because of the material you're using and your thread. I will do it if I know it makes a difference to how the quilt will turn out - but I usually just measure the middle strip to see that it's an exact inch. Thanks for the video - really enjoy them!
@MapleNutDesigns
22 сағат бұрын
Thank you for this video! I’ve been quilting for 3 months now, so this really helps!!
@amybigbee9425
10 күн бұрын
Debbie Caffrey would start every class with that technique!
@KathleenGingles
13 күн бұрын
I like that you where willing to admit that you where wrong and that you learn how to correct your seam allowance. Your cool dude.
@yevoonecreasey4594
Ай бұрын
Thank You 🌻 Awsome lesson!! I always lear something new when I watch your videos.. All the way from Man Sewing !! Keep on teaching!!!
@melgrazano
26 күн бұрын
I thought I was the only one who couldn't get 1/4 inch right. Changes all the time. Thanks I'll give a try.
@carolynmills513
23 күн бұрын
You're not alone. And sewing a straight line...😢
@WhirlyPearly
23 күн бұрын
Thanks for making me feel part of a club 🙄
@sprklhair
27 күн бұрын
Hey Rob! I started quilting about 4 years ago, give or take. I subscribed to your "Man Sewing". learned a lot and very grateful. what happened to your Man sewing Chanel? I'm sure this is old news, and since my quilting journey has improved I have brached out to quite a few sewing chanels. There is only so much time in a day to spend on my computer. love your style. and yes, I will subscribe to your new site! Keep stitching!
@markwagner4909
Ай бұрын
I learned this way when I first started quilting. The ladies at the quilt shop showed me
@wmarks34
Ай бұрын
Thank you! As a beginner quilter I struggle with 1/4” seam allowance. This will certainly help me to be accurate 🤗
@karoliyer4860
22 күн бұрын
Hi Rob…. So good to see you back on…… I’ve watched since man sewing…….thanks for the tip on 1/4” seams…..
@bettyperry6978
Ай бұрын
I just love your energy u always make me smile and I learn alot from u ty ty 4 being U😊❤
@sandramichaud8033
Ай бұрын
A good basic lesson never gets old. Liked and subscribed
@madhavidharankar
Ай бұрын
That was fantastic! Having personal quarter inch is so relevant!
@mrgarner4796
29 күн бұрын
Thanks Rob. It is important to keep the 1/4 inch seam allowance spot on. Appreciate your video.
@annmariecaparrotta6566
Ай бұрын
I too use the tape marking (love it) and yes I have tried the sample sew out to verify my 1/4” seam. I am a seam open person and it definitely makes a difference - same setup with nesting seams I was off my 1/4” then opened my seam and it was perfect-
@frontofficed.burnell-power6288
Ай бұрын
Bonnie Hunter has demoed this often throughout the years. It is good to know so many tried and true practices are passed on to the next gen of quilters even tho the gadgets change.
@fransak2723
Ай бұрын
Yes! I’ve seen her do it several times too. Just have to remember to put it into practice.
@Tanya99503
Ай бұрын
That’s great…. Thank you, it’s been a struggle for me. Now will be part of my set-up!
@TheJAG1357
Ай бұрын
This is such a great video. Thank you for sharing this method. I will try it! I always appreciate your videos ❤
@lynnelawrence7991
Ай бұрын
I was taught to measure the middle section which shoild be 1 inch.
@juliegray7658
27 күн бұрын
My first visit to this site. I love the enthusiasm. What fun!!!
@sandiadger8354
Ай бұрын
Thank you Rod. I appreciate this lesson. Sandi in California ❤
@kathykelley6937
Ай бұрын
I’ve had a bernina 770 for almost 3 years I thought I had a scant figured out then when I learned how it’s amazing how much of a difference it makes thank you
@pamkenniston2128
16 күн бұрын
Could you share hiw to measure ascant 1/4" seam? I usually just guess. Thanks
@paulahastings7865
Ай бұрын
I just started quilting. I'm going to do this! Very helpful!
@joannecarlow2153
Ай бұрын
I am not very good at precise 1/4” seams so thank you for this demonstration. I will give it a try.
@JustCallMeCB
25 күн бұрын
I don’t quilt but this is still so useful for so many other projects. Thanks!
@dianakranning9843
Ай бұрын
That's for sharing how to test for your 1/4 inch seams. Have a great weekend!
@gomezpnp
Ай бұрын
I made a strip piece yesterday and it was right on! So I inadvertently used this method and it worked.
@CootiePootieTootie
Ай бұрын
Nice to find you again!
@MimisQuest
29 күн бұрын
Thanks Rob. I'm a beginner and this has been very useful. Will calibrate tonight 😀
@SundaysChild100
29 күн бұрын
Rob I have done this for years and it’s worth the time it takes to do it. Thanks for this video!!!!!
@lindamusgravebever4620
4 күн бұрын
That's a great idea! I have gone to workshops and been so frustrated I almost stopped quilting because it had to be an exact 6.5" block and mine were ALWAYS less. Thank you for this. That particular quilt is getting a "Linda's Close Enough Adjustment", but all others that are finicky will get this!.
@nitababcock3977
Ай бұрын
Awesome, I hvnt done this but guess what... When I get back n the sewing room today or tomorrow, I'll b doing this!
@jeancornelius6099
Ай бұрын
I have a habit of losing my points when quilting. I'm going to do this with my machine to see if my 1/4 inch setting is off. Thank you for this great lesson!!
@maureenbaron2288
Ай бұрын
I'm making Bird of Paradise! Yes I like that technique...
@HellenaHanbasquet
Ай бұрын
This is excellent. I'm not a quilter, but this would still be so beneficial to garment and bag making. I've had patterns go wonky in the past and I would imagine it had a lot to do with not having a correctly set seam guide.
@amandakirk9765
Ай бұрын
I had no idea that that hole was for securing an edge guide!!!!!!!!!!!
@kyleneary8007
11 күн бұрын
Never have done but am going to try!
@carold1280
Ай бұрын
Great demo! I do this every time I have to remove the guide to clean under the throat plate or change the bobbin. It makes such a huge difference to the blocks and now my points aren’t cut off and the blocks are the right size🎉 worth the extra time it takes. I use a purple stick on strip called Sewing Edge which works great.
@susanlatulippe-k2g
Ай бұрын
thank yo for the great tip, I am starting a new quilt with my grand daughter and I will definitely calibrate for my seam allowance.
@hollywaddell6727
27 күн бұрын
And show your granddaughter how to do it while you’re at the machine together. Thank you for being patient and eager to teach another generation the joys of sewing.
@petrag.4092
Ай бұрын
Thanks for sha🙂ring. Blessings to you and yours.
@marymccumber9084
Ай бұрын
Thank you so much for this information. I have struggled with quarter inch seams for years. Makes perfect sense.
@michelletothill8551
Ай бұрын
This is a great refresher for me. I have been doing improve quilts where accuracy is not important. A quilting cruise with you sounds like lots of fun.
@D9P323
Ай бұрын
This helps ALOT, thanks Rob🎉.....i have her Craftsy class but this part really frustrated me. NOOOW I get it. I'd like to learn accurate cutting of yards and dare I say it, 😳QUILT MATH😳
@aphillips3602
Ай бұрын
I also really struggle with cutting yardage and have a strict only precuts for that reason. So a good clear cut video would be amazing! Also, you mentioned our rulers being off…… 😮……. I never thought that was posssible. 😢
@CootiePootieTootie
Ай бұрын
That's neat! I always use the clear green needle ruler with the magnet 😊
@ElizabethMoses-jy1js
24 күн бұрын
Thank you! My seams have always been slightly larger and I’ve always wondered why. I’m going to do some experimenting as you’ve shown here with my machine.
@SusieMonk-jh8tj
Ай бұрын
That’s a much cheaper way to accurate 1/4 inch than mu spécial foot. Still reeling from its final cost after shipping and customs. I like Debbie’s way of measuring and cutting before I got my stripology X-Large 👌👌❤❤liked and subscribed
@pamkenniston2128
16 күн бұрын
Wish i had seen this earlier. I'm piecing 3x5 and 3x10 strips around a 5" square. My seam ripper has gotten a workout in trying to get uniform sized blocks. Some of it was the strips i cut were a little wonky and the rest was inconsistent 1/4" seams. Doesnt take much to throw off a whole project. Thanks for the tips Rob!
@deewinston5651
15 күн бұрын
Thank you Rob. I’m still learning.❤
@wannabe0001
6 күн бұрын
Great technique. Thank you! I'm so not good at this 1/4 inch thing. And don't get me started on the "scant" quarter inch! Maybe a tutorial on THAT?
@rnfruita6793
28 күн бұрын
I have done this works wonders when using different threads and machines.
@SuperBettyboop23
Ай бұрын
Thanks Rob
@sewingqueen11
Ай бұрын
Thank you. I will try this.
@sandragalpin654
Ай бұрын
Thanks for sharing!
@debbiewhite3270
26 күн бұрын
Great idea
@gillianalderson148
26 күн бұрын
Great 👍🏻 thanks Rob
@rebeccamorris7671
29 күн бұрын
WoW ! Thank you for this Video.
@mphipps9062
28 күн бұрын
Thanks this is great
@EQHL2005
27 күн бұрын
I have a new to me sewing machine and I am nervous to sew with it cause I don't to get the 1/4 inch marked, thank you for sharing.
@MossyMozart
26 күн бұрын
So many other machines and measurements of all kinds need calibration, so it makes perfect sense that seam allowances would have to be also. I never thought of it before. >_
@sandypattison8486
21 күн бұрын
Thank you!
@sharonstacy3371
20 күн бұрын
I liked this video!!!
@bmebelmer6177
27 күн бұрын
Love this video. 😊 I learned a similar technique using three 2 1/2” squares. I have been “quilting” less than 5 years but sewing for many more. Great explanation of how many things factor into the 1/4” process. @Vickie Williams3259 left some great comments too.
@mickeyoconnell9166
20 күн бұрын
Great tip ..,
@gaylewest7140
21 күн бұрын
Thanks for sharing
@marlaatml
Ай бұрын
I need a t- shirt like yours.❤❤
@diannenaworensky6698
24 күн бұрын
Thanks for all your tips !!!
@ped869xe
Ай бұрын
Great Video! I learned this several months ago and have always used it when switching machine, esp. from the cruise's to my home machine. Although I sometimes have had to change from 1/4 to be a little bigger because the one's from the cruise are not always the same as mine.
@sharonjones6399
Ай бұрын
I’m on this. Interesting
@susiea8116
Ай бұрын
Great video!!
@ruthgreenleaves1735
27 күн бұрын
Your such a cool dude 😍
@genafuscaldo6373
Ай бұрын
Ouch…. My head hurts..Lol New Quilter
@suecallen2160
Ай бұрын
Wonderful tip! I've tried piecing and am always frustrated by my lack of true quarter-inch seams.
@marthafast4583
Ай бұрын
Great video
@MaryTurz
Ай бұрын
Why not just measure a quarter inch from your needle hole on the presser foot to the guide and adjust accordingly?
@hollywaddell6727
27 күн бұрын
As Rob was careful to mention a few times, there are many variables that affect the outcome. Here are some he mentioned and some I added to the mix: the weight of the thread being used, the pressing method (seam allowances pressed to one side vs. seam allowances opened up and pressed), cutting accuracy (can vary from ruler to ruler), fabric from different mills (some more substantial than others), even the size of the sewing machine needle might make a slight difference. Oh, and on newer machines that have the option of moving the needle from side to side, one might forget that the needle is not in the center position from having moved it for a previous project.
@naomibonilla7605
15 күн бұрын
This is an excellent explanation. Thank you.
@hollywaddell6727
15 күн бұрын
@@naomibonilla7605 You are welcome … I’m on the quarter-inch quest myself; hoping to get better the more blocks I construct.
@penelopesummersby5718
Ай бұрын
thank you
@jpowley2691
Ай бұрын
Great learning video. I would love to learn how to work with directional fabrics- flying geese, HST’s and QST’s. Thank you!
@elsafischer3247
Ай бұрын
Thank you for this hint
@happystitcher1895
Ай бұрын
What is that stand up tool holder behind Rob on the shelf? I find I need to do this with each project, thank you for sharing.
@dottyhope7349
24 күн бұрын
Hey Rob, another great video! Do you ever do an edge to edge quilting. Any chance you might make a video of that? Thank you!❤️
@randyolson5001
Ай бұрын
It works to make it as a scant qtr
@karenchristensen9679
Ай бұрын
I always sew with a scant quarter inch seam and then press my seam open. I guarantee your blocks will turn out the correct size every time. I have Bernina sewing machines. With these I can move my needle over one click and with my quarter inch foot, the seams always turn out to be a scant quarter inch. If you sew with a perfect quarter inch seam allowance and then press your seams to one side, I also guarantee your blocks will be slightly smaller than called for. I also always, when I can, oversize my blocks and then cut down to the correct size. To do this you need to add 1-1/4" inch😢es when making HST and 1-1/2" if making QST. I also make my flying geese bigger and trim to size. They are perfect every time. Hope this helps. Karen
@lydiamashcka4362
29 күн бұрын
I see the little unders and overs add up in the end.
@dcwatashi
Ай бұрын
Vanessa of The crafty Gemini did this demonstration many many many years ago. And it depends on the pattern because I was making a table runner and the instructions said scant quarter inch scene and I just did a regular quarter inch seam and the blocks did not match so if they say scant that’s what they mean and of course everybody should do a test block anyway.
@rbebut1
23 күн бұрын
Where were you when I was putting together a bargello quilt. This would have gone a long way in keeping the fabric from waving.
@kathygannonOBWQF
Ай бұрын
Hey Rob. What’s your opinion on pressing open? I do this on all my piecing now since doing one Block wonders soo much. I love the way things lay flat and I don’t have to think about which way to press them. Would love to know what you think?
@cecile862
Ай бұрын
I've given up on the exacting and elusive 1/4 inch seam allowance. I'm building a quilt with 45degree diamond stars. 3/8 inch is working like a dream. The slightly wider seams press beautifully flat, especially the centre ! The whole piece is structurally stronger. Now to try it on an octagonal kaleidoscope block- that nightmare centre with all those points coming together.
@kathrynbarbara967
29 күн бұрын
Interesting, I have wondered if a larger seam allowance is easier to achieve. I’ve just pressed open the seams on my backing (it’s in 7 pieces, why, why, why??? To save money) and noticed that the quarter inch is tiny bit off in places of long seams. I was using a quarter inch foot in the first place.
@hollywaddell6727
27 күн бұрын
@@kathrynbarbara967I have heard many instructors here on KZitem say that they use half-inch (1/2”) seam allowances on their pieced backings to add durability.
@jneely5372
5 күн бұрын
I have done this exercise but was told to move my needle to from the center to achieve the desired outcome.
@catthefabriclover
Ай бұрын
I saw this years ago but with a nine patch, this way is better and quicker. Sew, what is a "scant" 1/4 inch seam? Is it just a perfect 1/4 inch? Or less than a 1/4 inch?
@JustABayouGirl
Ай бұрын
I was taught to measure the inside piece after pressing, and if it's one inch, then your 1/4" is good.
@user-rk1ie8lh4l
21 күн бұрын
Love the quilt in the background! What pattern is it?????
@shadow51mcke
Ай бұрын
I have sewn on the original Bernina 830 for 54 years and loved my machine every time I made a quilt, but the pedal broke and I couldn’t get it fixed, I’m now sewing on the 480 and can’t get a quarter inch seam to save my life. I am going to try this and see if I can fix that, Thank You and Debbie
@audreynims4940
17 күн бұрын
I don't have trouble getting good quarter inch seams, but I do have issues with my pieced quilt tops that get used and laundered coming apart along seams. Especially on flannel, but also good quality quilting cotton. I'm considering to increase my allowances to 1/2 inch. Any thoughts?
@joanspiegelman143
29 күн бұрын
What difference would it make if you were consistent and used the same, albeit slightly off, measurement?
@aprilblood1854
Ай бұрын
You have such great shows can you tell us about the quilt behind you? Is there a pattern?
@GK-vt4ux
20 күн бұрын
Do you use double-sided tape for your zippers? And if you do and mistakenly get a bit inside the machine, how do you get it out?
@biggarbotanics2574
12 күн бұрын
what is the quilt in the background called, I have been looking for the pattern, I watched the tutorial on it, and now I cant find it
@barbaramunoz9217
Ай бұрын
I would like to learn how to piece blocks together, square it and have it be the size pattern calls for
Пікірлер: 146